- Metrology - Laboratory >
- Metrology and Test Equipment >
- Other measuring devices
Other measuring devices
Pulse centralizing device to fully manage the consumption of any installation. It can send data to a higher-level SCADA system thanks to the line-TCPRS1 gateway, which incorporates Wi-Fi and Ethernet communications.
The CVM-D41 DC is a digital power analyzer for installing on a DIN rail. Its screens are operated using buttons to display different electrical parameters in a DC network of up to 1500 VDC, such as voltage, current, power and energy (A·h). This ...
Outline The TOS7200 is an insulation resistance tester available for a wide range of various electric and electronic components, as well as electric and electronic equipment. Output voltage can be optionally set in the range of -25 to ...
Kikusui Electronics
• Determination of the magnetic properties of electrical steel in all common quality grades, thicknesses and geometries and of other soft magnetic materials • Quality control of strip steel, punched parts, stators, transformer or ring ...
Brockhaus
• Determination of the magnetic properties of electrical steel and other soft magnetic materials • Free configuring with specific measuring coil systems • Parallel connection of up to 12 measuring coil systems • Fully digitalized data ...
Brockhaus
• Determination of the magnetic properties of electrical steel and other soft magnetic materials • Free configuring with specific measuring coil systems • Parallel connection of up to12 measuring coil systems • Fully digitalized data ...
Brockhaus
The FF20 CT is the expert microCT system for R&D, defect analysis, or CT metrology. It is designed for inspections of very small components and objects in the electronics industry, material science, and other research areas. • Accurate ...
With its dual-tube configuration, the high-energy, high-resolution FF85 CT achieves extremely precise inspection results for a wide variety of material types and part sizes. • Extensive range of applications from microCT to high-energy ...
KRD40 series drop tester, mainly simulates the resistance to drop and impact of large and heavy packaging products. Its strong power system and unique sample holder facilitate easy loading and unloading of oversized and overweight items ...
CME Technology Co., Ltd.
KRD41 series small drop tester is suitable for free-fall test of small consumer electronics and components such as mobile phones, walkie-talkies, electronic dictionaries, CD / MD / MP3 and so on, applicable standards JISC 0044 and IEC ...
CME Technology Co., Ltd.
KRD42 series double lift zero drop tester is mainly suitable for large size packaging products to resist drop impact performance, its powerful power system and unique sample support for easy loading and unloading of oversized, overweight ...
CME Technology Co., Ltd.
A stand-alone, fully automatic high barrier oxygen transmission rate system. Ideal for those new to permeation testing while offering all the features and flexibility required by advanced users. The OX-TRAN 2/22 oxygen permeation instrument ...
AMETEK MOCON
OX-TRAN 2/40 OTR Analyzer for Packages The OX-TRAN 2/40 series is the next evolution in whole package testing for Oxygen Transmission Rate in controlled conditions. - Oxygen Permeation Analyzer - Packages & Film - ASTM D3985 - ...
AMETEK MOCON
Automated to Save You Time A stand alone fully automated water vapor transmission rate (WVTR) system. Ideal for those who need fast and accurate results. Easy to use for those new to permeation while offering the features needed for advanced ...
AMETEK MOCON
The temperature cycling tester is designed to determine the resistance of thermoplastic pipe network and connections consisting of stiff or flexible parts to alternating thermal shock. This applies to pipe systems intended to be used for ...
AHP PLASTIK MAKINA
The universal tensile tester is used for performing tension, pressure or bending tests. The classic application is the tensile test. This involves subjecting a sample to an increasing tensile load until it breaks. According to ISO 527 ...
AHP PLASTIK MAKINA
The falling weight tester is used to determine the external impact resistance of thermoplastic pipes using the staircase or round-the-clock method according to EN744. According to EN 744 , EN 1411 , ISO 3127 , ASTM D 2444 , digital height ...
AHP PLASTIK MAKINA
The SET CROSS HOLE SEISMIC is our set of instruments for borehole surveys specifically designed for a thorough geophysical investigation of the subsurface and for the measurement of seismic waves of compression and shear specifically ...
Reliable PD testing on electrical equipment Our MPD 800 universal partial discharge (PD) measurement and analysis system represents the next generation of our widely-used and innovative MPD PD testing technology. Enhanced and newly-added ...
OMICRON electronics
Ultra-high frequency partial discharge measurement and analysis system Our portable, easy-to-use UHF 800 system performs sensitive offline and online partial discharge (PD) measurement and analysis in the ultra-high frequency (UHF) range ...
OMICRON electronics
MONCABLO is a customizable, permanently-installed system for the continuous on-line monitoring of partial discharge (PD) activity in the electrical insulation of high-voltage cable systems, including cable terminations and joints. Advanced ...
OMICRON electronics
Smart_Projector_Double Pharma Double Magnification Video Measuring Instrument for Primary Pharmaceutical Packaging: Smart_Projector_Double Pharma allows automatic, objective, repeatable, easy and fast dimensional quality check of a wide ...
SmartVision S.r.l.
The best Price/Performance Digital Profile Projector “Easy_Projector the best price/performance video measuring machine for dimensional control” High Performances at a Low Price! This special line low cost, available in two models, ...
SmartVision S.r.l.
State-of-the-art of Uniformity & Polarization Tester according to Standards. Smart_Tester allows a complete Polarization Axis and Transmittance Uniformity Check for SunLenses, SunGlasses, Masks and SkiGoggles according to International ...
SmartVision S.r.l.
Test Device for Flammability of Plastics for Parts in Devices and Appliances in Accordance with UL 94, 5th and 6th Edition, DIN EN 60695 Part 11-10, DIN EN 60695 Part 11-20, DIN EN 60695 Part 11- 3, DIN EN 60695 Part 11-4, ISO 9772 ...
The cable measuring device VCPX5 is designed for geometrical measurements for core insulations and cable sheaths. Due to the robust construction and the very easy operation, the VCPX5 is especially suited for use in production processes ...
iiM AG measurement + engineering
The new AlphaOne - the combination of precision and flexibility. With the compact and simultaneously highly precise measuring device for cross section measurements of cables and hoses, you receive new possibilities in your quality assurance ...
iiM AG measurement + engineering
The cable measuring device VCPLab is a camera-based system for measuring cable geometries from insulations and sheaths. Integrated high resolution sensors allow very accurate measurements of both very thin samples with an outer diameter ...
iiM AG measurement + engineering
The BE20 model is a medium-voltage detector that is constructed in accordance with stringent standards and is equipped with numerous features. Housed in an enclosure based on Ingress Protection class 65, this voltage detector is an ideal ...
Magtrol’s Cogging Test System is a stand-alone test system designed to control and measure Detent Torque, Cogging Torque and Friction Torque. The test System includes a precision geared motor, a TS Series Torque Sensor integrating a 5 ...
Shaft copying system – absolute positioning of the elevator car. LEB02 is an extremely robust, compact and contactless measuring system. With a resolution of 1 mm and a travel speed of up to 8 m/s, absolute position values of the elevator ...
KÜBLER GmbH
Shaft copy system – safe and absolute positioning of the elevator car. The sensor Ants LES02 is an extremely robust, compact and contactless measuring system. With a resolution of 0.5 mm and a travel speed of up to 12 m/s, absolute ...
KÜBLER GmbH
Shaft copy system – Realization of elevator and safety functions. The PSU02 is combined with the Ants LES02 sensor to realize elevator and safety functions in compliance with EN81-20/-21/-50. The Ants LES02 measures the absolute car ...
KÜBLER GmbH
The modular one Test methods • - MFR • - MVR Test volume • - Average Applications • - Universal Methods • - Method A • - Method B Mflow - the Modular One The basic version of the Mflow extrusion plastometers can ...
ZwickRoell GmbH & Co. KG
For automated impact tests (Charpy/Izod) Industries • - Plastics Type of test • - Impact flexure (Charpy, Izod) Specimen range • - Cooled specimens Standards • - ISO 179-1 • - ISO180 • - ASTM D256 • - ISO 148-1 • - ASTM ...
ZwickRoell GmbH & Co. KG
For automated impact tests on tempered metal specimens (Charpy) or PE/PP specimens (Charpy/Izod) Industries • - Metals Type of test • - Impact flexure (Charpy) Specimen range • - Cooled specimens • - Semi- or fully automatic ...
ZwickRoell GmbH & Co. KG
ACT-1000N is automatic crimp tester with 1000N capacity. It performs crimp test automatically from testing to storing the data by simply pressing start button which enhances the testing efficiency. Feature • - Perfect solution for ...
IMADA
Wire crimp tester LH-500N is a lever-operated manual test stand including wire/terminal grips. With a force gauge, it offers a testing system to perform wire crimp test. Features It offers a simple and affordable yet efficient ...
IMADA
AMK series is an angle meter kit for torque-angle measurement designed to be connected with handheld digital torque gauge, HTGA series. Features -Attachment for HTGA series -Measure angle from 0.1 to 9999.9 degrees Specifications [AMK-360 ...
IMADA
TIME3221 Surface Roughness Tester is a high cost-effective surface measurement device. Separated driver makes it easier and more flexible to approach different surfaces. Touch screen. Measuring range reaches 400μm to test curved surface. ...
BEIJING TIME VISION AI INSTRUMENT LTD.
TIME®3200/3202 Surface Roughness Tester is a cost-effective roughness measuring equipment which supports more parameters. It is small and light. Quitely suitable for on-site roughness testing. Features ● Over dozen measurement parameters ...
BEIJING TIME VISION AI INSTRUMENT LTD.
Features ● Pocket-size unit with economical price, widely used in production lines, workshops and labs. ● Wide measuring range suitable for most materials, and applicable for flat, outer cylinder and sloping surface ● Ragged design ...
BEIJING TIME VISION AI INSTRUMENT LTD.
MTE series resistance and capacitance standards are designed for calibration of ohmmeters, LCR meters and insulation testers. Alternatively, MTE standards can be used as transfer standards, keeping traceability between primary and secondary ...
The DSA100HP is our high-quality solution for the precise measurement of contact angle and surface tension and interfacial tension under high pressures and temperatures, primarily for tertiary oil recovery. The DSA100HP combines our Drop ...
The patented R2010 wheel measuring machine was developed to measure geometric features at car wheels. It combines the function of measuring value recording, measuring process, calculation and illustration of the measured features in a ...
The patented R2010 wheel measuring machine was developed to measure geometric features at car wheels. It combines the function of measuring value recording, measuring process, calculation and illustration of the measured features in a ...
The new AXOS 5 - Compact integrates all of the best features of our stand alone test systems into one single economic solution. It is capable of 5kV EFT/Burst, 5 kV Combination Wave (1.2/50 us & 8/20 us), AC/DC Dips & Interrupts (requires ...
Haefely AG
With a ProfiMessage D device, you can immediately begin using a optinal PROFINET interface as well as communicating to third-party systems via an OPC UA Server/Client. The device is also equipped with a display to show important configuration ...
Delphin Technology AG
Vibration measurement device for vibration data acquisition and vibration analysis With Expert Vibro, we have succeeded in combining complex functions and the requirements for high flexibility in a user-friendly vibration measurement ...
Delphin Technology AG
ProfiMessage devices have been specially developed for use as modular measurement, control and monitoring units. ProfiMessage uses a master/slave concept and has a range of I/O modules to meet the requirements of any system. This enables ...
Delphin Technology AG
Our manufacturing program includes torque sensors, force sensors, load cells as well as the corresponding measured data evaluation units. Furthermore customized system solutions and test benches for the acquisition of speed, torque, ...
The Fault Mapper Pro® Model CA7027 is a hand-held graphical TDR Time Domain Reflectometer designed for identifying and locating faults on power and communication cables, given access to one end only. The Fault Mapper Pro® measures ...
AEMC Instruments
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining