Power: 0.15 kW - 7.7 kW
Intensity: 0.76 A - 69.2 A
Torque: 0.2 Nm - 129 Nm
The AM8000 servomotors are durable and powerful synchronous servomotors. They are available in seven sizes with up to four lengths and offer a seamlessly overlapping range for all application areas with a standstill torque from 0.2 to ...
Beckhoff Automation
Current: 0.16 A
Power: 0.03 kW
The MS116-0.16 manual motor starter is a compact 45 mm width devices with a rated operational current of Ie = 0.16 A. This device is used to manually switch on and off motors and to protect them reliably and without the need for a fuse ...
ABB
Power: 50 W - 15,000 W
Torque: 0.16 Nm - 95.5 Nm
Rotational speed: 1,000, 1,500, 2,000, 3,000 rpm
Accurax G5 servomotors include IP67 protection and connectors on the motor body. Use of 10 pole motors and 20 bit encoder results in 40% reduction in motor cogging. The servomotors are 25% lighter and 15% smaller due to patented new stator ...
Omron Electronics GmbH
Expansion module of the modular safety relay myPNOZ, inputs: 6 for monitoring of 2-hand monitoring Type IIIC to EN 574 and another safety function (1/2-channel wiring with/without detection of shorts across contacts) AND-linked, width: ...
PILZ
Expansion module of the modular safety relay myPNOZ, outputs: 3 n/o safe delay-on de-energisation switching relay contacts (t=0-300s), 1 signal output in semiconductor technology, inputs: 2 for monitoring 1 safety function: 1/2-channel ...
PILZ
Expansion module of the modular safety relay myPNOZ, outputs: 2 safe instantaneous switching semiconductor outputs, 1 signal output in semiconductor technology, width: 17.5mm General data Approval - CE CCC UKCA cULus Listed ...
PILZ
VersaMax Modular is control and IO that can be snapped together to provide a compact node with a smaller footprint than typical control/IO combinations. Features Powerful and Reliable VersaMax controllers provide powerful, reliable ...
Emerson
Power: 0.06 kW - 3 kW
The EMS2 electronic motor starter from Eaton's Moeller series combines all the functions of a conventional motor starter in a single, highly compact device. With a width of only 22.5 mm, it can be used in any application where motors ...
Eaton
Power: 100 W - 800 W
Torque: 0.32 Nm - 0.96 Nm
Rotational speed: 3,000 rpm - 5,000 rpm
-230 VAC, 100 W -40mm flange, 8mm shaft, 0.32/0.96Nm, 3000/5000rpm -Absolute 18 bit multi turn encoder (262144 ppr) -Low inertia Mechanical Inertia - 0.0023 kg•cm² Flange size - 40 mm Shaft diameter - 8 mm Shaft ...
Power: 90 kW - 400 kW
Torque: 289.26 Nm - 1,284.67 Nm
Rotational speed: 1,000, 1,500, 700, 3,000 rpm
The W22 Medium Voltage motors provide the same advantages as the W22 Low Voltage line, but with voltages of 1.1kV to 6.6kV. - Reduced vibration and noise levels - Higher efficiency levels - Easy maintenance - Frame with high ...
WEG
EVOX CP is a helical in-line gearbox with a smooth surface that gives high performance at a great value. With a market standard-aligned footprint, EVOX CP can be fitted to any machine without changing the gear unit interface. Thanks to ...
Bonfiglioli
Parallel-axis type helical gear reducers Features ・Low Noise & Long Life With our proven experience in low-noise design and manufacturing technologies, we have achieved low-noise, long-life gear motors. ・Compact, light weight An ...
Tsubakimoto Chain
・High Efficiency Less sliding and greater efficiency compared to a worm gear. At the same output, there is less power consumption and greater cost effectiveness. ・Low Noise Tsubaki’s know-how in gear motor processing technology ...
Tsubakimoto Chain
This reducer is a right-angle worm gear reducer with a motor that offers a small footprint, lightweight design, and quiet operation. Croise Motor make use of worm gears to achieve space savings in equipment layout with right-angleshafts ...
Tsubakimoto Chain
Remote expansion module for the sigmaPAC family of programmable controllers It allows to expand the resources available on nP4 and AC3nP, providing additional inputs and outputs: Inputs: – 0/4 High level analogue: Configurable ...
It allows to expand the resources available on nP4 and AC3nP, providing additional inputs and outputs: Inputs: – 0/4/8 Universal analogue: Configurable 0/1 … 5 V, 0/2 … 10 V, 0/4 … 20 mA, TC (J, K, L, N, R, S, T), PT100 ( 2 wires), ...
Torque: 0.02 Nm - 110 Nm
The AlphaStep AZ Series stepper motors offer high efficiency, low vibration and incorporates our newly developed Mechanical Absolute Encoder for absolute-type positioning without battery back-up or external sensors to buy. Closed loop ...
ORIENTAL MOTOR
Power: 50 W - 5,000 W
Even more compact design Thanks to the split core structure and a new housing, we have been able to reduce not only the length by 30%, but also the weight by up to 10%. High-resolution 23-bit encoder – can be used as an absolute or ...
A broad range of standardised machine elements is offered by mbo Osswald. These include axle holders in accordance with DIN 15058, set collars as per DIN 705, taper keys with gip head according to DIN 6887 and tangential keys as per ...
mbo Oßwald GmbH & Co KG
There are different standardized components that can be used for safe and functional design in any construction. These machine elements are made either in stainless steel or steel. The surface protection can be selected. It can either ...
mbo Oßwald GmbH & Co KG
The Mbo Taper keys, a series of product from a robust and comprehensive linking technology, offer a wide array of components that provide functional and safe design to any types of machine elements. These taper keys are available with ...
mbo Oßwald GmbH & Co KG
Gear ratio: 0 unit - 2,935 unit
Operating temperature: -20 °C - 40 °C
The efficient bevel geared motors are a compact, powerful drive unit and comply with efficiency classes IE2 and IE3. Thanks to the bevel gearbox, they have high permissible radial forces, closely stepped ratios and low backlash. - ...
Lenze SE
Gear ratio: 0 unit - 3,240 unit
Operating temperature: -20 °C - 40 °C
The robust and universally applicable helical geared motors are an axial drive unit and optimized for 120 Hz operation on an inverter. Thanks to the helical gearbox, they have high permissible radial forces, closely stepped ratios ...
Lenze SE
Gear ratio: 0 unit - 4,640 unit
Operating temperature: -20 °C - 40 °C
The slim and space-saving, highly dynamic synchronous shaft-mounted helical geared motors with good concentricity properties enable precise positioning with resolvers or single-cable encoders as feedback. Thanks to the shaft-mounted ...
Lenze SE
Gear ratio: 4 unit - 24,963 unit
Helical gear units, their input and output shafts are parallel and they can be connected to machines from sides of housing, with torque arm or from output flange. • Monoblock housing design • Additional reduction stages available ...
Brevini Power Transmission
Power: 11 kW - 355 kW
Rotational speed: 6,000 rpm
Synchronous motors combining reluctance and permanent magnets Available in interchangeable IEC or compact range IP55 with aluminum housing Integration in the most diverse machines
LEROY-SOMER
Power: 30 W - 1,500 W
Rotational speed: 3,000 rpm
Compact and reliable servo motors Flange size: 40mm, 60mm, 80mm, 86mm, 100mm, 130 mm square Rated power: 30W to 1.5kW Maximum speed: 6500 rpm Sensor: absolute or incremental encoder up to 27-bit IP rate: IP67 Options ...
SANYO DENKI EUROPE
Power: 30 W - 25,000 W
Compact and reliable servo motors with middle inertia: High efficiency and et stable holding torque Flange size: 40mm, 60mm, 80mm, 86mm, 100mm, 130 mm, 180mm, 220mm and 275mm square Rated power: 30W to 30kW Maximum speed: ...
SANYO DENKI EUROPE
Power: 30 W - 200 W
Flange size: 20mm, 40mm and 60mm square Rated power: 20W to 200W Maximum speed: 6000tr/min Sensor: absolute or 17-bit (131072 PPR) incremental encoder IP rate: IP67 Options : Holding brake
SANYO DENKI EUROPE
Gear ratio: 1,024, 16, 256, 4, 64 unit
Gear motor is a generic name that a motor and a gearhead are combined. Basically, a motor has higer speed(our standard one has 2,600 mini-1～16,500mini-1). However when the customer want to use on the application, there many cases that ...
Citizen Micro Co., Ltd.
Gear ratio: 1,024, 16, 256, 64 unit
Gear motor is a generic name that a motor and a gearhead are combined. Basically, a motor has higer speed(our standard one has 2,600 mini-1～16,500mini-1). However when the customer want to use on the application, there many cases that ...
Citizen Micro Co., Ltd.
Gear motor is a generic name that a motor and a gearhead are combined. Basically, a motor has higer speed(our standard one has 2,600 mini-1～16,500mini-1). However when the customer want to use on the application, there many cases that ...
Citizen Micro Co., Ltd.
Power: 0.52 kW - 21.3 kW
Torque: 1.5 Nm - 157 Nm
Rotational speed: 0 rpm - 5,000 rpm
The MPP (MaxPlusPlus) Series is an industry leading high performance servo motor. Utilizing eight-pole segmented lamination technology, along with high grade neodymium magnets, the MPP produces more torque in a shorter package to save ...
Parker Electronic Controls Division
The high-torque direct-drive combined motor with a high-gain control system provides quick acceleration and positioning to make rotation smoother.
MITSUBISHI ELECTRIC AUTOMATION
Current: 4 A
Power: 0.09 kW - 1.5 kW
The podis®/gesis® motor & soft starters for decentralized application close to the motor are based on the podis power bus solution and can be used in harsh industrial environments. LOW WEAR & ENERGY SAVING Motor starters In a particularly ...
Power: 60 W - 1,000 W
Rotational speed: 1,360 rpm - 2,830 rpm
Three-Phase Motors Type UD, OD Voltage : 1) 230/400 V Frequency : 50 oder 60 Hz Number of Poles : 2) 2-pole, 4-pole Type of protection : IP 54 1) Moreover we supply Three Phase Motors for all voltages up to 480 V. 2) Other numbers ...
WEG Antriebe
Power: 0.2, 0.4 kW
Intensity: 1.5, 2.8, 4.5, 8.4 A
Torque: 0.64 Nm - 3.81 Nm
60-base series AC permanent magnet servo motor is universal-type AC servo motor developed by INVT. The power range is 200W~15kW, which can fully satisfy the function demands of general industry robots. It is widely applied in electronic ...
Gear ratio: 5 unit - 30 unit
Bevel Buddybox - BBBH with IE5 Gearmotor Gear with Ultra-Premium Efficiency IE5 Motor Overview Sophisticated right angle hollow shaft gearmotor with IE5 Ultra-Premium Efficiency Motor High performance IE5 permanent magnet synchronous ...
SUMITOMO (SHI) Cyclo Drive Germany GmbH
Please specify:
Help us improve:
remaining