Other motors and accessories

Power: 4,021 W
Intensity: 9 A
Torque: 32 Nm

Fans are very important for industries where reliability in heating or cooling control matters. Multiple industries depend on standard asynchronous (ac) motors for their fans, but the landscape is changing. Companies within the industry ...

Torque: 7 Nm

► New series of stepper motors with integrated ministep bipolar chopper drives; setting by means of EtherCAT interface and based on incremental and multi-turn absolute encoder with STO function. ► Compact system housed in a metallic ...

Torque: 3 Nm

► New series of stepper motors with integrated ministep bipolar chopper drives; setting by means of EtherCAT interface and based on battery less multi-turn absolute encoder. ► Compact system housed in a metallic box mounted on motor ...

► Series of stepper motors with integrated ministep bipolar chopper drives equipped with STEP & DIRECTION interface. ► Compact system housed in a metallic box mounted on motor body, minimizing dimensions and optimizing wiring and mounting ...

Highest efficiency in the FG-series. FG-series parallel shaft geared drive units impress with maximum efficiency, optimally smooth running with high-contact-ratio helical gear technology and a large number of space-saving mounting options. ...

Power: 0.09 kW - 18.5 kW

Our standard range covers the complete size range from 56 to 160. You get additional flexibility with our wide range of variants: ABM AC induction motors are available as energy-saving motors, single-phase motors, liquid-cooled motors, ...

Power: 0.12 kW - 13 kW
Torque: 0.75 Nm - 75 Nm
Rotational speed: 500 rpm - 6,000 rpm

The ABM SINOCHRON® motor is a permanently excited synchronous motor with internal permanent magnets (IPM motors). Through the special design, additional encoder technology is not needed, making this a very economical alternative to costly ...

Gearmotor suitable for low torque needs. A large selection of reduction ratio is available to satisfy a wide range of application. The applied synchronous and DC motors are the same described in the related datasheets.

Gearmotor suitable for low torque needs. A large selection of reduction ratio is available to satisfy a wide range of application. The applied synchronous and DC motors are the same described in the related data sheets.

Rotational speed: 500, 600 rpm
Diameter: 48 mm
Operating temperature: -30 °C - 80 °C

The syncronous motors work only from an alternate current and consequently their speed is strictly bound to the frequency of the power line wired.It could be ordered in clockwise, anticlockwise and no-sense rotation.

Power: 0.06 kW - 315 kW
Rotational speed: 3,000, 1,500, 1,000, 750 rpm
Diameter: 56 mm - 355 mm

Huifeng’s three phase motors are general purpose motors and designed according to IEC 60034. The motors can be customized according to your requirement. •Junction Box is 90° Rotatable and with Two Cable Entries •Feet can be installed ...

Power: 0.25 kW - 2.2 kW
Rotational speed: 3,600, 1,800 rpm
Operating temperature: -10 °C - 40 °C

Huifeng’s NEMA standard series motors are designed in accordance with NEMA MG.1:2016. •Rigid base (Welded on), or C-face with removable reet or round body (footless) are optional •T flange and customized shaft end is available •Steel ...

Power: 0.06 kW - 1.5 kW
Rotational speed: 1,500, 3,000, 1,000 rpm
Diameter: 56 mm - 90 mm

Stainless steel Motors for food processing, pharmaceutical and other applications requiring extreme cleanliness and frequent washdowns When food, beverage or pharmaceutical production plants are washed down, the motors – along with ...

Customized drive solutions based on tried-and-tested standards – the spn principle Varying demands require individual solutions. Whether you need robust gear components,, high-performance gear units or complex mechatronic drive systems: ...

HOPF-feed screwdriver are installation and hand tools with a very high power density. High torques combined with small dimensions and attractive design make them to excellent tools for many different purposes. Because of the modular ...

Always when the standard is not sufficient, SPN offers solutions especially according to customer requirements. Special motors in special designs or materials are also possible in little batch sizes. Servo drives in stainless ...

LENNIX® Pro for industrial cranes is a control and regulation system which enables cranes to position their loads quickly and to reduce the risk of collision. It independently eliminates the unavoidable oscillations that occur while the ...

The 28 Input Module is an expansion module for the Touch Panel. It can be mounted either on the car top or in the COP. It can be used to interface position, direction and information outputs from the lift control panel to the Touch Panel. ...

We supply complete kits for building cost-effective cranes: Standardized end carriages, standardized wheel bogies, underslung trolleys, variable travelling drives with pole-changing or frequency-controlled motors, electric hoists up to ...

We supply complete kits for building cost-effective cranes: Standardized end carriages, standardized wheel bogies, underslung trolleys, variable travelling drives with pole-changing or frequency-controlled motors, electric hoists up to ...

The oil-cooled starters are stepped resistor starters with contactors and resistor grids in a housing filled with insulating oil and are particularly suited for high performance drives that are not frequently started. The design combines ...

Power: 0.06 kW - 22 kW
Operating temperature: -20 °C - 40 °C

Process performance motors are characterized by high efficiency, reliability, state-of-the-art technology and a broad range of accessories. In our company, the information on the label is true Do you merely want the lowest price, ...

Power: 0.06 kW - 3 kW
Rotational speed: 1,500, 3,000 rpm
Operating temperature: -20 °C - 40 °C

HM motors are delivered in two variants. HM1 for the expected performance during the motor run or HM2 for the expected performance during the motor startup and run. In our company, the information on the label is true Do you merely ...

Power: 0.75 kW - 355 kW
Operating temperature: -20 °C - 40 °C

Process performance motors are characterized by high efficiency, reliability, state-of-the-art technology and a broad range of accessories. In our company, the information on the label is true Do you merely want the lowest price, ...

- vapor deposition after pyrolysis of coating material - Coating Thickness Uniform - IP X7 rating level

- Moulding all electrical parts - Protect electronic components in high-water environments - IP X6 Rating Level

- Coating surfaces with acrylic solution on all electrical parts - Protect electronic components in a moisture-containing environment - IP X4 rating level

Power: 12.8 kW

LIFT DRIVES Under the brand "Swiss Traction Germany", PATZSCH Elektromaschinenbau GmbH develops, produces and sells gearless lift drives for heights up to 35 metres. The energy-efficient and compact direct drives of the ZEFIR series ...

STATOR WINDINGS We offer different stator windings for your generators and electric motors. Three-phase mush winding • In single-layer, two-layer or special design • State-of-the-art manufacturing technologies, e.g.: Automatic ...

Power: 200 kW

ROTOR WINDINGS Whether DC or three-phase rotor windings - we take into account all special parameters when manufacturing your rotor windings. Slipring rotor windings We produce mush or bar windings, depending on the rated output ...

Power: 12, 30 W
Intensity: 1.1, 1.52 A
Torque: 0.018, 0.0408 Nm

We for many years engaged in the development, production and sales of the hollow cup permanent magnet DC motor. Hollow cup motor is a high performance motor structure is special, hollow cup motor not only has the common permanent magnet ...

Power: 3, 4 W
Intensity: 0.35, 0.4 A
Torque: 0.0095, 0.0083 Nm

We for many years engaged in the development, production and sales of the hollow cup permanent magnet DC motor. Hollow cup motor is a high performance motor structure is special, hollow cup motor not only has the common permanent magnet ...

Power: 0.6 W
Intensity: 0.15, 0.11 A
Torque: 0.002, 0.0008 Nm

We for many years engaged in the development, production and sales of the hollow cup permanent magnet DC motor. Hollow cup motor is a high performance motor structure is special, hollow cup motor not only has the common permanent magnet ...

The JSX1-DIO22 expansion module features 10 safe IOs, 12 safe inputs, and 2 signaling outputs. The IOs can be configured either as inputs, or outputs. Features 10 safe IOs which can be configured either as inputs or outputs 12 safe ...

Power: 2 kW - 7 kW
Torque: 0.28 Nm - 60 Nm

Going with the servo amplifiers of the JetMove series are Jetter motors featuring DC link voltages of DC 24 to 560 V and a great selection of motor windings. By an appropriate combination you can achieve the speed which best fits your ...

The JX3-AI4 module is an expansion module for connecting analog sensors. Features 4 analog inputs Selectable input signal per channel Resolution: 16 bits Averaging User-defined scaling Monitoring of ...

DETAILS Thanks to our highly skilled staff we are managing the development and implementation of synchronous and asynchronous motors. Our high efficiency motors enhance the capacity to generate the maximum benefits for those who going ...

Power: 0.5 ch - 50 ch
Rotational speed: 1,000 rpm
Operating temperature: -40 °C - 80 °C

Magnetek's Black Max motor meets the needs of more common crane applications. Black Max motors have a foot mounted NEMA design, and a "C" face drive end and accessory "C" face. This modular design shortens delivery time and can be ...

Power: 1 ch - 400 ch
Rotational speed: 1,500 rpm

Blue Max Motors offer the most complete line of inverter duty motors in the industry. This motor series was designed to Magnetek's specifications, and is ideal for use in any application where precise motion control is needed. Tests ...

High precision planetary (epicyclic) gearbox coupled to a 3 pole 10mm flat sided ferrite motor. The unit features a lightweight injection-moulded gearbox assembly and is manufactured to an extremely high quality. The unit was developed ...

An open frame 13mm gearhead mounted to a 15mm diameter flat type DC motor. The gearhead features high quality machined spur gears with an inline output, the motor is a 3-pole brushed ferrite core motor. The gearmotor can be mounted with ...

Power: 0.12 W

These motors are a marvel of modern engineering! They combine rare earth magnets with a coreless design to produce high torque motor with only a 6mm diameter. They feature a sintered bronze bearing to support the output shaft. Originally ...

* It is scientifically designed and reasonably configured following customized schemes on customers’ field ,output,material types and so on.It is high in automation; * Monitored by computer,PLC control,safe,high-efficient,conservation ...

* It is scientifically designed and reasonably configured following customized schemes on customers’ field ,output,material types and so on.It is high in automation; * Monitored by computer,PLC control,safe,high-efficient,conservation ...

Power: 94.07 W
Intensity: 4.2 A
Torque: 3 Nm

This NEMA motor satisfies any requirement. As a cloosed-loop stepper motor with 2 phases, it turns 1.8° per step and ensures steady movement and an optimum holding torque of 3 Nm. The feedback loop allows the motor driver to recognize ...

Intensity: 0.6 A
Torque: 0.018 Nm
Rotational speed: 3,000 rpm

Our NEMA 8 series are very small high torque stepper motors that can reach up to 3000 rpm. These motors are used in the model making and maker scene as well as in the industrial environment (e. g. positioning of optics, dosing pumps, ...

Power: 15.435 W
Intensity: 1.5 A
Torque: 0.45 Nm

This stepper motor can be optimally used for tasks in the areas of Automation, CNC (f. e. engraving lasers, 3D printers, milling machines, etc.), or robotic. As a bipolar stepper motor with 2 phases, it turns 1.8° per step and ensures ...

Power: 24.85 W - 186.42 W
Torque: 0.39 Nm - 0.77 Nm
Rotational speed: 0 rpm - 3,500 rpm

The M4000 Series Permanent Magnet Motor offers the design engineer a rugged product along with a great deal of design flexibility. • 1/30 hp up to 1/4 hp • 0.500" Maximum Shaft Diameter • 2.015" Standard Pilot Diameter • Class "F" ...

Gear ratio: 10 unit - 50 unit

RAE's oil filled G16 right angle gear train gives you more torque for the buck and brings increased capacity in a compact design. With a continuous duty torque of up to 95 inch pounds, this worm driven gear train can sustain torques higher ...

Power: 11.18 kW

The D196 is a very rugged three phase AC controller designed to provide variable voltage between the incoming AC power line and a single or two speed AC motor. Two separate control channels and four independent adjustments provide the ...

Power: 21 kW - 420 kW
Intensity: 42 A - 700 A
Torque: 65 Nm - 1,340 Nm

• IEC axle heights 100-225 • Cooling type IC06 with open circuit circulation • Compact design • Very long service life • Large field weakening range • Low maintenance (brush-free) • High degree of effectiveness Therefore ...

Power: 0.1 kW - 50 kW
Torque: 0.4 Nm - 3.13 Nm
Rotational speed: 1,000 rpm - 10,000 rpm

DAMPTAC servo motor can control speed, position accuracy is very accurate, can convert the voltage signal into torque and speed to drive the control object. Servo motor rotor speed is controlled by the input signal, and can react quickly. ...

Power: 0.1 kW - 50 kW
Torque: 0.4 Nm - 3.13 Nm
Rotational speed: 1,000 rpm - 10,000 rpm

DAMPTAC servo motor can control speed, position accuracy is very accurate, can convert the voltage signal into torque and speed to drive the control object. Servo motor rotor speed is controlled by the input signal, and can react quickly. ...