stepper motor controller
stepper motor controller
DRV88xx series

Texas Instruments provides analog Motion/Motor Control Power Management products under the Analog and Mixed-Signal solutions. More so, application notes, datasheets, order samples about these Motion/Motor Control Power Management ...

stepper motor controller
stepper motor controller
DRV series

TI offers a rich family of stepper motor driver solutions with industry standard step/direction and parallel control interfaces. Advanced current control and micro-stepping schemes, along with a broad voltage and current coverage, deliver ...

stepper motor motor controller / compact
stepper motor motor controller
ACOPOSmicro

The ACOPOSmicro drive system can handle a broad range of drives using the same tools. Its has a modern and compact design, taking up only less than 50 cm² per axis. It also comes with a 24 VDC output which can be utilzied to control external ...

stepper motor motor controller / compact
stepper motor motor controller
max. 6.8 A | Lexium SD3 Series

The SD3, which is a universally applicable stepper drive from Schneider Electric, has a very compact and high performance drive system made in combination with the three phase stepper motors by Schneider Electric. With the reference value ...

stepper motor controller
stepper motor controller
max. 80 VDC | VIX

The Parker VIX series microstepper drives has a digital design that delivers field-oriented control using Parker's proven EASI code controller. The whole interface can be mounted in panel or DIN rail style. It also has a fully programmable ...

stepper motor controller
stepper motor controller
XL series

This motor ensures protection against short circuits and overcurrent, while the recommended inductance range is between 0.8 and 10mH. In addition, the support for panel mounting and the 1.8, 3.5 and 5.6A rating with bus up to 80VDC are ...

stepper motor controller
stepper motor controller
max. 6.8 A | Lexium SD3

These are 3-phase stepper drives for better motion control and Lexium SD3 & Motors

stepper motor controller / integrated / programmable
stepper motor controller
A3998 series

Current: 1.5 A
Output voltage: 9 V - 50 V

Designed to provide the motor driver and power supply requirements for printers and office automation equipment. This integrated power IC incorporates two high current, high performance, full bridge outputs, capable of 1.5 A at 50 V. ...

See the other products
ALLEGRO MICROSYSTEMS
stepper motor controller / synchronous / integrated
stepper motor controller
A4980 series

Current: 1.4 A
Output voltage: 3.3 V - 50 V

The A4980 is a flexible microstepping motor driver with built-in translator for easy operation. It is a single-chip solution, designed to operate bipolar stepper motors in full-, half-, quarter- and sixteenth-step modes, at up to 28 V ...

See the other products
ALLEGRO MICROSYSTEMS
linear indexer / rotary / cam / for stepper motors
linear indexer
RSD series

DESTACO's CAMCO RSD is a zero-backlash, cam-actuated drive, compatible with industry-standard servo motors for precise control and flexibility. Applications The RSD can be used for rotary or linear applications.

microstepping motor controller
microstepping motor controller
DS, SI

The DS and SI Drives are microstepping driver developed by Tolomatic. They are specifically developed based on the stepper drive technology. These units provide ideal and high quality performance when coupled with electric linear rod ...

rotary indexer / cam / for stepper motors
rotary indexer
DTR series

The large dial index DTR series has the same internal components as the DT series but includes an innovative integrated reducer that allows the motor to be mounted on the right, left or with 2 motors (as shown). The internal reducer is ...

See the other products
Sankyo America
rotary indexing ring / cam / for stepper motors
rotary indexing ring
Do series

Sankyo's Do Series ring indexer features cast iron housings with a large stationary center bore. The center and outer rings can support stationary dials above or below the indexing dial. Since both inner and outer rings are the same housing, ...

See the other products
Sankyo America
stepper motor motor controller / positioning
stepper motor motor controller
JX2-SM1D

Current: 5 A
Output voltage: 70 V

Smart expansion module for one stepper motor axis with integrated amplifier for 2-phase stepper motors. Distinctive Features: Position controller and output stage 70 V / 5 A for 2-phase-stepper motors. Positioning range -8,388,608 ...

stepper motor motor controller / positioning
stepper motor motor controller
JX2-SM2

Smart expansion module for controlling two stepper motor amplifiers. Available are direction and clock output with open collector and RS422 interfaces. Distinctive Features: Positioning controller for 2 stepper motor amplifiers ...

linear motor controller / for stepper motors / integrated / multi-axis
linear motor controller
max. 150 kHz | ACR222/2

Interfaces for stepping motor output stages up to 150 kHz: 2 Interfaces for incremental encoders to 1 MHz: 2 Encoder power supply direct from the module via the connectors Monitoring of all external supply voltages ...

8-axis motion control card / advanced / servo / stepper
8-axis motion control card
PCI-8158

The PCI-8158 brings a maximum frequency pulse rates of up to 6.55 MHz. It is built up with a hardware-controlled emergency input stop. The device has also a software security protection in order to avoid plagiarism. Also, to stop the ...

See the other products
ADLINK TECHNOLOGY
4-axis motion control card / advanced / stepper / servo
4-axis motion control card
PXI-8164

Ad-Link's PCI-8164/PXI-8164 4-Axis Servo & Stepper Motion Controller with High-Speed Triggering capabilities is generally used for applications that involve linear and circular interpolated move and constant contouring. They are updated ...

See the other products
ADLINK TECHNOLOGY
stepper motor motor controller / high-resolution
stepper motor motor controller
TANGO DESKTOP series

High-resolution stepper motor controller in a stage case. High-resolution stepper motor control TANGO Desktop now enables you to control up to 4 axes. It has been especially developed for demanding positioning performance in medical ...

See the other products
Märzhäuser Wetzlar
stepper motor controller
stepper motor controller
TANGO PCI-S series

See the other products
Märzhäuser Wetzlar
two-phase stepper motor controller
two-phase stepper motor controller
5 - 10 A,max. 500 W | CompletePower™ SA45

ElectroCraft presents SA45 CompletePower™ drives. The drives run on a bipolar stepper motor. They offer nominal current of 5A and 10A. The drives are suited for stepper motors up to 500W. This bipolar stepper drives come in a completely ...

stepper motor controller
stepper motor controller
62 oz-in (44 Ncm) max. 50 RPS | PT42 series

The PT42 combines the ElectroCraft TorquePowerTM Plus high-performance stepper motor with the advanced functionality of the Integrated PRO Series Drive. The motor can be driven in open-loop stepper mode or in closed-loop using the integrated ...

two-phase stepper motor controller
two-phase stepper motor controller
24 - 35 V DC | MD2U-ID20

* Unipolar constant current pentagon drive type * Low vibration by microstep operation * Realizing the running features of variable speed AC motor as stepping motor * Adjustable RUN speed constantly using external voltage and adjuster * ...

See the other products
Autonics
two-phase stepper motor controller
two-phase stepper motor controller
24 - 35 V DC | MD2U-MD20

Main features ● Unipolar constant current pentagon drive type ● Low vibration by microstep operation ● Realizing the running features of variable speed AC motor as stepping motor ● Adjustable RUN speed constantly ...

See the other products
Autonics
stepper motor controller
stepper motor controller

DC, Brushless, Servo, Variable Reluctance, and Stepper Motor Drivers ON Semiconductor supplies a variety of dc motor control devices.

multi-axis motion control card / electronic / stepper / servo
multi-axis motion control card
4 - 8 axes | Euro404, Euro408

The flexible axis ports can be configured in software as feedback devices or pulse direction outputs. As outputs they can be used as pulse and direction with stepper or servo drives or they can operate as a simulated encoder output. When ...

See the other products
Trio Motion Technology
stepper motor motor controller
stepper motor motor controller
1 - 9 axes, 150 MHz | Euro209

User programs are written in Trios established Multi-Tasking TrioBASIC and applications can be developed using the Windows based Motion Perfect environment. Complex motion profiles are easily programmed and these can be linked to a master ...

See the other products
Trio Motion Technology
multi-axis motion control card / electronic / stepper / PCI
multi-axis motion control card
DMC-18x2

The DMC-18x2 Econo Series are PCI bus motion controllers designed for the most cost-sensitive applications. The DMC-18x2 controllers accommodate 1- through 4-axis formats and allow control of step or servo motors on any combination of ...

stepper motor controller
stepper motor controller
12 - 24 VDC, 0.35 - 2 A | R208

The R208 Microstepping Driver is built with a power-on indicator. It comes with a step resolution options from full, half, 1/4, and 1/8 microsteps. A power disable or enable control feature is integrated. The tool guarantees a minimal ...

See the other products
Lin Engineering
miniature stepper motor driver
miniature stepper motor driver
24 - 80 VDC, 0.3 - 7 A | R701 / R710

The R701/R710 provides a minimal power dissipation, and a sinusoidal current waveform. It consists of controls for the current, and for disabling/enabling the power. Also, the unit is integrated with a power-on indicator. The device functions ...

See the other products
Lin Engineering
multi-axis motion control card / embedded / stepper
multi-axis motion control card
PMAC Clipper

The PMAC Clipper Controller is a full featured Turbo PMAC designed for extremely cost sensitive applications. This powerful, but compact and cost-effective, multi-axis controller comes standard with Ethernet and RS232 communication ports ...

See the other products
Delta Tau
multi-axis motion control card / embedded / stepper / servo
multi-axis motion control card
PMAC2 UMAC CPU

The Turbo PMAC2 UMAC CPU is intended to be used in a Compact UMAC Rack (CPCI), which is a modular rack format permitting the user to configure his or her rack with I/O cards, servo control cards, or any other accessory card Delta Tau ...

See the other products
Delta Tau