Stepper motors

96 companies | 585 products
Filters
  • What’s new?
    Submit
electric motor - 1.8°, IP43 | MS 135/200 HT-2

The MS 135 HT-2 is a two-phase stepper motor designed with 1.8° step angle. It can be easily regulated and features an extended productivity...

electric motor - 1.8°, IP43 | MS 300/600/900 HT-2

The MS 300 HT-2 series is a range of 2-phase electric stepper motor from Isel. These stepper motors are easy to control and has...

high-torque electric motor - 10 - 17 Nm, IP50 | iRD 80/50 series

The iRD series torque motor are multi-pole, permanent-exciter three-phase current synchronous motors. The device comes with hollow shaft rotors and at a good price to performance aw. It comes with rotor, housing, bearing and sensor...

{{productDetail[6054]}}
stepper electric motor - 1.1 - 1.8 Nm | MS 135 / 200 HT Series

The MS 135/200 HT-2 by Isel Germany is a 2-phase electric stepper motor which...

stepper electric motor - 2.15 - 9 Nm | MS 300 / 600 / 900 HT Series

The MS 300/600/900 HT-2 series are manufactured by Isel Germany, and are 2-phase electric stepper motors...

{{productDetail[8809]}}
stepper electric motor / DC / two-phase - 0.24 - 1.6 Nm

ECOSTEP® 54 is a four axis motor amplifier for two-phase DC stepper motors. Microstep control at 12.800 microsteps...

{{productDetail[18428]}}
stepper electric motor - 0.02 - 0.03 Nm | 208 series

The 208 series, manufactured by Lin Engineering, is an electric stepper motor. This...

stepper electric motor - 0.06 - 0.12 Nm | 211 series

The 211 series is a unit manufactured by LIN Engineering company. It is...

stepper electric motor / modular - max. 0.11 Nm | 3709V series

NEMA size 14 or 17 Mountings
Small...

stepper electric motor / modular - 0.03 - 0.11 Nm | 3809 series

The 3809 modular step motor features high step efficiency...

stepper electric motor - 0.04 - 0.05 Nm | 3518X series

The 3518X Series manufactured by LIN ENGINEERING is a standard motor made with...

{{productDetail[23523]}}
two-phase electric motor - 19 - 56 mm | ZSS

These are two-phase hybrid stepper motors suitable for both unipolar and bipolar control mode, and the units possess holding torques that range from 3.8 to 700 Nm. The sizes available range...

two-phase electric motor - 56 - 107 mm | ZSH

The ZSH series is manufactured by Phytron, and is a two-phase hybrid stepper motor that is highly appropriate...

stepper electric motor / vacuum-compatible - 19 - 125 mm | VSS/VSH

Phytron’s VSS stepper motors are manufactured based on 30 years of experience in space technology. The two-phase hybrid stepper motors are utilized in vacuum environments up to 10 exp (-11) hPa. They are suitable...

stepper electric motor / vacuum-compatible - 19 - 125 mm | VSS UHVC

The VSS UHVC is a two-phase vacuum electric stepper motor that is ideal for operations that require a maximum...

stepper electric motor / vacuum-compatible - 19 - 125 mm | VSS SPACE

The VSS Space from Phytron is a series of stepper motors used for operations in space. Models of the series are equipped with adequate shock and...

{{productDetail[7098]}}
stepper electric motor - 5 - 12 VDC, 3.4 W | 26000, Z26000 series

The 26000 series, and the Z26000 series are manufactured by Haydon Kerk, and are...

stepper electric motor - 5 - 12 VDC, 4.6 W | 36000 series

The Z20000 series engineered by Haydon Kerk Motion Solutions, is capable stacking electric...

stepper electric motor - 5 - 12 VDC, 10 W | 46000 series

The 46000 Series, manufactured by Haydon Kerk, is a rotary stepper motor equipped...

stepper electric motor - 5 - 12 VDC, 2.5 W | Z20000 series

Models of Haydon Kerk's Z20000 Series of rotary motors are commonly used for applications that...

stepper electric motor / thin - 12 VDC, 12 kW | 80000 series

The 8000 Series is a range of 80 mm pancake stepper motor from Ametek. The series is suitable for applications that require accurate positioning with high torque and...

{{productDetail[31460]}}
stepper electric motor - max. 1 500 rpm | AM series

The Stepper (Series: AM), manufactured by Tolomatic, is capable of a speed of up to 1500 RPM. In addition,...

stepper electric motor / high-resolution - max. 3 000 rpm | MRS series

Stepper Motor Features

Motor speeds up to 3,000 RPM
High resolution...

{{productDetail[7066]}}
high-torque electric motor - IP54, 1.9 kW | DTK 7

Applications
For applications with limited available space, e.g., linear...

{{productDetail[14297]}}
five-phase stepper electric motor / DC - max. 85 mm | AK series

Main features

● Compact design and light weight with high accuracy, speed and...

five-phase stepper electric motor - max. 85 mm | AHK series

Main features

● Removeable the coupling connecting Ball-screw, TM-screw...

five-phase stepper electric motor / with integrated controller - 60 mm | AK-B series

Main features

● Compact design and light weight with high accuracy, speed and...

five-phase stepper electric motor / with integrated controller - 60 mm | AK-GB series

Main features

● Compact design and light weight with high accuracy, speed and torque
● Cost-effective
●...

five-phase stepper electric motor / with integrated controller - 60 mm | AK-RB series

Main features

● Compact design and light weight with high accuracy, speed and torque
● Cost-effective
●...

{{productDetail[23164]}}
stepper electric motor - max. 12 V, 5.5 W | M73

The M73 stepper motor, of simple design, is made up of the...

stepper electric motor - max. 12 V, 11 W | M76

General construction
The M76 stepper motor, of simple design,...

{{productDetail[11607]}}
electric motor - 3.2 - 12 VDC, 25 oz-in | H17 series

Mounting Flange:NEMA 17
Step angle:1.8°
Steps per Revolution:200
Positional Accuracy:+ 5% max.
Number of Phases:4 (unipolar)
Temperature Rise:70°C max
Insulation Resistance:100M ohms at 500VDC for 1 minute
Dielectric Strength:500VAC...

electric motor - 3.2 - 12 VDC, 44.5 oz-in | H17ET series

Mounting Flange:NEMA 17
Step angle:1.8°
Steps per Revolution:200
Positional Accuracy:+ 5% max.
Number of Phases:4 (unipolar)*
Temperature Rise:70°C max
Insulation Resistance:100M ohms at 500VDC for 1 minute
Dielectric Strength:500VAC...

electric motor - 2.8 - 12 VDC, 83.4 oz-in | H23R series

Mounting Flange:NEMA 23
Step angle:1.8°
Steps per Revolution:200
Positional Accuracy:+ 5% max.
Number of Phases:4 (unipolar)*
Temperature Rise:80°C max
Insulation Resistance:100M ohms at 500VDC for 1 minute
Dielectric Strength:800VAC...

electric motor - 1.3 - 8.5 VDC, 187.6 oz-in | H23S series

Mounting Flange:NEMA 23
Step angle:1.8°
Steps per Revolution:200
Positional Accuracy:+ 5% max.
Number of Phases:4 (unipolar)*
Temperature Rise:80°C max
Insulation Resistance:100M ohms at 500VDC for 1 minute
Dielectric Strength:800VAC...

stepper electric motor / permanent magnet - 5 - 24 VDC, 35 mm | LSD35 series

Frame Size:35mm
Step Angle:7.5°
Steps per Revolution:48
Position Accuracy:+/- 5% max.
Number of Phases:4...

{{productDetail[14601]}}
stepper electric motor - PM series

PM Stepping Motors

High output torque
Wide range selection from 10mm to 42mm
Bipolar & Unipolar available
Changeable...

{{productDetail[19827]}}
stepper electric motor / high-torque - 42 - 253 oz-in | POWERMAX M & P Series

Pacific Scientific POWERMAX II® P and M Series Step Motors set the standard for value...

electric motor - POWERPAC K & N Series

Pacific Scientific POWERPAC® N3, N4, K3, and K4 Series Hybrid Step Motors deliver more power in a smaller package. These rugged NEMA 34 and 42 (90 and 110 mm) frame motors...

stepper electric motor / high-torque - CT Series

CT series motors incorporate innovative cooling technology, high torque magnetic designs, rugged bearings, and high...

stepper electric motor - T Series

The T Series stepper motors are a set of custom T2 Series and N Series motors,...

stepper electric motor / high-torque - 74 - 4 360 oz-in | KM Series

Superior Electric KM series of high torque NEMA 23 and 34 and 42 (60, 90 and 110 mm)...

{{productDetail[24821]}}
high-torque electric motor - 0.33 - 10 hp

1/3 to 10 HP, TEFC, High Torque (HT): Feeders, conveyors, fans, compressors, spray washers, grinders,...

high-torque electric motor - 1.5 hp, 3 450 rpm

Designed for extra high breakdown torque for maximum cutting power. Motor...

high-torque electric motor - 1.5 - 4 hp, 3 450 rpm

These totally enclosed fan cooled (TEFC) motors produce extra high breakdown torques for maximum cutting power. Motors...

{{productDetail[9182]}}
high-torque electric motor - 1.5 - 4 hp, 3 450 rpm

Ultra High Torque Motor
Emerson’s Ultra High Torque Motor is designed for
starting torque loads (typical starting torque: 300
-...

{{productDetail[11602]}}
electric motor - NEMA 10 - 34, 6 - 310 Ncm

These hybrid stepping motors rotate at fixed angles by digitally controlled electronic pulses. The hybrid stepping motors...

stepper electric motor / permanent magnet - 14.7 - 166.7 mNm | PM Series

A permanent magnet motor, sometimes called a "tin can" motor, can be...

stepper electric motor / permanent magnet - 150 - 700 mNm | PG Series

A permanent magnet motor can be the perfect solution to many motor applications. It is reliable, efficient, and long-lasting. It is a cost effective solution when not using a hybrid step motor. One problem with the permanent magnet motor, however, is getting the amount of power...

{{productDetail[20004]}}
stepper electric motor / compact - 0.6 - 1.2 Nm

Nominal torque 0,6 to 1,2 Nm
Operating temperatures: [-40°C;+105°C]
Lightweight:...

stepper electric motor / compact - 1.6 - 25 mNm

Torque: 1.6 to 25 mNm
Speed range: 200 to 1000 degree/s
Weight: 7...

stepper electric motor / with integrated controller - 0.12 - 9 Nm

The smart LoadSense motor permanently adapts the phase current to meet the torque load.

LoadSense is your unique solution for motor efficiency.

Features

Intelligent...

electric motor - 0.13 - 9 Nm

Step angle: 1.8 °
Size: Ø 42 / Ø...

stepper electric motor / permanent magnet - 11 - 120 mNm

Step angle 7,5 º - 15 º
Size Ø 25 Ø...

{{productDetail[14206]}}
stepper electric motor / permanent magnet - 11 - 120 mNm

A hybrid stepper motor combines the best features of a standard variable...

stepper electric motor / permanent magnet - 11 - 120 mNm

You can find the Permanent Magnet (PM) step motor you need right here by filling out the fields above. Choose a step angle from the degree range provided,...

{{productDetail[7398]}}
{{productDetail[7688]}}
stepper electric motor / integrated-drive - 1.1 - 2.9 Nm | MIS230-MIS234

The MIS230-MIS234 series are integrated-drive electric stepper motors that are available in three sizes. The MIS231 version is sized 1.1Nm while the MIS232 has a mesurement...

stepper electric motor / with integrated controller - 9 A | MIS34x series

QuickStep, the Integrated Stepper Motors from JVL.
A wealth of possibilities in a series of of the world´s most compact stepper motors with the higest microstepping resolution. 3 sizes...

stepper electric motor - 18 - 30 mNm, 3.9 - 4.32 V | MST081A03,  MST082A03

Mini Stepper Motors MST081A03 and MST082A03

The small mini step motors MST081A08 and MST082A08 are designed to be used in applications where dimensions and weight...

stepper electric motor / high-torque - 0.07 - 2.4 Nm | MST170 - 432

The MST170 - 432, manufactured by JVL, is a high-torque electric stepper motor made for use with the entire range of JVL Step motor Drivers and Controllers....

stepper electric motor / high-torque - 1.1 - 2.4 Nm | MST001A, MST002A, MST234B03

The MST001A, MST002A, and MST234B03 are step motors from JVL. They are suitable for OEM applications....

{{productDetail[22516]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation