 |
 |
Optical source for fiber optic network test 2510 series Keithley Instruments
The Models 2510 and 2510-AT TEC SourceMeter instruments enhance Keithley's CW (Continuous Wave) test solution for high speed LIV (lightcurrent- voltage) testing of laser diode modules. These 50W bipolar instruments were developed in close cooperation with leading manufacturers of laser diode modules for fiberoptic telecommunications...
 |
 |
Auto-correlator TAIGA THALES Optronique
Features 750 TO 950 NM SPECTRAL RANGE 30 FS TO 1 PS PULSE DURATION RANGE 10 TO 100 ìJ INPUT BEAM ENERGY 10 HZ TO 10 kHz LASER REPETITION RATE APPLICAT IONS SHORT PULSE DURATION MEASUREMENT APPLICATIONS SHORT PULSE DURATION MEASUREMENT Ideal for Ultimate Pulse Duration Measurement Operating at rates from 10 Hz to 10kHz, TAIGA is an autocorrelator used for short pulse duration measurement....
 |
  |
Multi-test device for fiber optic network OptiFiber® Pro Fluke Networks
OptiFiber® Pro is the industrys first OTDR built from the ground up to meet the challenges of enterprise fiber infrastructures. This troubleshooting and certification tool combines uncomplicated...
 |
 |
Auto-correlator 700 - 1 100 nm | PulseScout® Series MICRO-CONTROLE / Spectra-Physics
The PulseScout™ autocorrelators are a versatile, easy-to-use diagnostic tool for measuring ultrafast pulses, from both high repetition rate (MHz) oscillators and low...
 |
 |
OTDR module for fiber optic test 32.5 - 39 dB, 29/28 dB | ACCESS Master MT9083A2 Anritsu
Until now, installing and maintaining optical networks required technicians to carry a variety of equipment which was not only cumbersome, but also expensive. Hearing this common...
 |
 |
Optical source for fiber optic network test 1475 - 1625 nm | FOS-79800F series ILX Lightwave
The FOS-79800F Series WDM DFB Fiber Optic Source Modules are designed for the most demanding WDM system and component test applications. This reliable source module platform provides picometer resolution, high power, excellent stability, coherence control, optional...
 |
 |
Optical power and wavelength meter 630 - 1650 nm | ADCMT 8471 Rohde Schwarz
The 8471 is an optical wavelength meter that uses a helium-neon laser as reference wavelength and employs the Michelson interferometer...
 |
 |
Optical power and wavelength meter AQ6150 series Yokogawa Electric Corporation
The AQ6150 Series Optical Wavelength Meter is an ideal instrument for accurately measuring the optical wavelength of optical devices and systems used in telecommunication applications from 1270...
 |
 |
Fiber optic fusion splicer tool OptiSplice® M90e CORNING
The Corning Cable Systems OptiSplice® M90e Fusion Splicer is the next generation of...
 |
 |
Color measurement software Avantes
The AvaSoft Color Application has been developed to perform on- and off-line color measurements with a spectrometer system. It can be used for reflective color measurements. This application provides a precise way to perform color measurements using the basic principles and techniques defined by the International Committee on Illumination...
 |
 |
Fiber optic test device SCT-MMA/SMA series Megger Limited
As the number of fiber optic links in the network increases it’s essential that your certification tester seamlessly certifies both copper and fiber, efficiently combining all media results together for analysis and reporting. The...
 |
 |
OTDR module for fiber optic test MTS-6000, 6000A, 8000 JDSU
In-Service CWDM OTDR test solution to maintain and troubleshoot CWDM fiber networks. The CWDM OTDR solution helps cable operators, dark fiber providers and telecommunication service providers...
 |
 |
Loss and reflection test meter for fiber optics 525-90 GREENLEE
1310/1490/1550nm Automated Insertion/ReturnLoss measurements One button...
 |
 |
Optical interferometry software 4D Technology
4Sight™ provides state of the art 3D data display capability. In fact, all of the wavefront graphics on...
 |
 |
Optical power and wavelength meter MS12 JGR Optics Inc.
The MS12 modules combine advanced time-domain technology with a unique wide-aperture integrating cavity. An internal monitoring channel and a reflectance reference are used to provide highly accurate insertion loss and reflectance measurements even for APC connectors which are well known to be difficult...
 |
 |
Fiber optic test device Brimrose
Lumcom is available as a benchtop high-resolution (1 nm) AOTF FO Spectrometer or as individual modules for use with testing fiber optic components. Various light sources are available from broadband incoherent light sources, to high power LED's to various...
 |
 |
Optical source for fiber optic network test EXFO
The most versatile, complete light source available with up to three singlemode wavelengths on a single port, or four wavelengths (two multimode and two singlemode)...
 |
 |
Single-mode fiber optic fusion splicer tool FSM-60S Fujikura
The FSM-60S sets another benchmark in robustness as well as reliability in splicing performance in a harsh environment. Not only history-proven Fujikura fusion splicing technology, excellent shock resistance supported by elastomer protectors and new structure design,...
 |
 |
Fiber optic test device Cemar Electro Inc.
Now in its fourth generation, the Loom Laser series Thread-Break Detection system uses cutting-edge laser and microprocessor technology to provide protection from thread breaks in any weaving environment. Thread breaks are detected...
 |
 |
Fiber optic fault locator Kingfisher International
Overcomes the limitations of any mini OTDR or Optical Time Domain Reflectometer when used to accurately find a hidden event Locate the exact physical position of a hidden underground...
 |
 |
Fiber optic test device Laser Components
Fiber Tester FIBERCHECK The condition of an optical fiber can easily be checked with the fiber tester FIBERCHECK by coupling in good visible laser light. Functional principle If the beam hits a damaged part, most of the light is scattered out of the fiber. In this...
 |
 |
Fiber optic test device LUNA Innovations
The Luna OBR 5T-50 is a fast, simple-to-use, low cost precision reflectometer that measures the Insertion Loss (IL) and Return Loss (RL) distribution...
 |
 |
Fiber optic test device McPherson, Inc.
Optical Fiber Environment Test System Built to test and measure optical fibers. Quantify fiber transmission, numerical aperture, losses due to bend radius and performance over various or changing temperatures. Easy to use, this system benefits industries that produce or specify optical fibers for communication and data transmission applications as well as those developing new or novel fiber materials....
 |
 |
Auto-correlator 10-30000 fs Avesta Project Ltd.
The AA-10DD real-time autocorrelator offers smooth and fast measurement of femtosecond and picosecond pulse duration. Different models of the autocorrelator cover several wavelength ranges, with the AA-10DDM model combining the ranges by using 3 interchangeable photodetectors and optics. Two separate ranges can also be covered upon request. Input pulse duration ranges from...
 |
 |
Fiber optic test device 800 - 1700 nm | PROLITE-30 PROMAX ELECTRONICA
The PROLITE-30 series are handheld, easy-to-use optical test instruments that identify optical fibres without any damage by detecting the optical signals...
 |
 |
Loss and reflection test meter for fiber optics Scitec Instruments
Features - Automated loss measurements for three wavelengths - Built in fibre identifier - Adaptors for all popular fibre connectors - Power Meter with - 75 dBm sensitivity - Stable triple wavelength laser source - Storage for 2000 triple wavelength loss measurements - Rechargeable Li polymer 9V battery - USB...
 |
 |
Fiber optic inspection microscope Seikoh Giken
This unique microscope combines high quality optics with a modern and ergonomic design ideally suited to fiber optic inspection applications. Until the D-Scope, most microscopes were suffering from poor illumination quality yielding variable and non-reproducible...
 |
 |
Fiber optic power meter 1260 - 1565 nm Ningbo Hi-tech ADK Network Technologies Co., Ltd
Feature %u25C7 New PPM-350B-EG-ER: the only power meter truly optimized for EPON and GPON architectures %u25C7 Pass/warning/fail indicators (10 threshold sets) for easy assessment of power values-anywhere...
 |
 |
Auto-correlator BONSAI Amplitude Technologies
The Bonsai auto-correlator from Amplitude Technologies features single shot, single beam operation making it extremely simple to align and to operate; ideal for everyday temporal duration measurement. In addition, its...
 |
 |
Multi-test device for fiber optic network 10 Gbps | SunSet 10G Sunrise Telecom
The SunSet 10G is the industry’s first true 10 Gbps handheld test set for installing and maintaining high-speed optical networks. The SunSet 10G is an affordable...
 |
 |
Fiber optic loss measuring device OptoTest
The OP831 is designed to per form bi-directional inser tion loss measurements on single-fiber and multi-fiber optical cables....
 |
 |
Fiber optic power meter 400 - 1700 nm | PM20 Series Thorlabs
InGaAs (PM20C or PM20CH) or Si (PM20A) Sensors Wavelength Range: 400 nm - 1100 nm (Si) 800 nm - 1700 nm (InGaAs) Power Ranges: -60 dBm to 16 dBm (1 nW - 40 mW) for PM20A -60 dBm to 13 dBm (1 nW - 20 mW) for PM20C -50 dBm...
 |
 |
Auto-correlator VENTEON Laser Technologies
Femtosecond Characterization Tool Interferometric Autocorrelator IAC The VENTEON | PULSE : FOUR interferometric autocorrelator is a stand-alone tool for precise measurements of pulse durations down to 5 fs - the shortest...
 |
 |
Fiber optic fusion splicer tool KTH series Winchester Electronics
Fusion Splicer Winchester has partnered with AFL Telecommunications to design a customized KINGS® Brand Fujikura fusion splicer for our HDTV Fiber Optic Tri-Loc®...
