 |
 |
Laser controller ISEO THALES Optronique
Full timing control of a complex laser system ISEO is a low cost compact system, used to generate synchronisation signals (high and low frequency) with programmable timing for one or several laser systems and pulse sequences similar to the Burst Generator. ISEO provides 20 outputs with tuning...
 |
 |
Disk laser max. 4 000 W | TruDisk series TRUMPF
The TruDisk disk laser combines the advantages of a solid-state laser with those of a diode laser. The diode laser, as the pump...
 |
 |
Electronic-gate optical shutter H0xx series SEIKO Precision Inc.
Shutter for DSC (Digital Camera) ■ Full-open & ND filter...
 |
 |
Optical beam-combiner Agilent Technologies
Monolithic laser combiner for microscopy Now there’s a better way to spend your time. Agilent monolithic laser...
 |
 |
Motorized mirror-holder ø 95 - 193.8 mm, 6.8 - 16 kg | AMG LP series Aerotech
Aerotech’s new AMG LP (Low Profile) position and rate gimbal mounts provide ultra-precise angular position, rate, and acceleration for development and production testing of a wide range of systems. The AMG LP series is ideal for directing optics, lasers, antennas, and sensors at high speed to precise pointing angles. Typical applications include missile seeker test and calibration, electro-optical...
 |
  |
High-power laser diode module driver 35 V | LDX-36000 series ILX Lightwave
The LDX-36000 Series High Power Laser Diode Drivers are a family of high performance current sources designed specifically for controlling and testing high power laser diodes. Ten models offer maximum current ranges from 10A to 220A QCW and 125A CW with maximum compliance voltages from 12V to 35V. Each instrument offers high setpoint accuracy, low output noise with forward...
 |
 |
Mirror-holder ø 1" | K 25 series OWIS
The K 25 kinematic small mirror mounts are intended for mirrors up to 1" diameter, or, when used for beam deflection, for 20 x 30 mm rectangular mirrors. Two fine-thread screws or micrometers with 0.25 mm pitch enable fine...
 |
 |
Piezo steering mirror, nano-rad resolution Physik Instrumente
PI offers a wide range of ultra-fast piezo-driven piezo tip/tilt platforms and scanners (steering mirrors, beam deflectors, phase shifters) specially designed for active...
 |
 |
Optical delay line 1 310 - 1650 nm | F-VDL, F-TDC-OPT Series MICRO-CONTROLE / Spectra-Physics
Optical Delay Lines, Motorized Variable The MDL Series Motorized Variable Optical Delay Lines provide precision optical path delays of up to 17 cm, which corresponds to 560 picoseconds maximum delay in the time domain. Driven by a DC motor with an integrated encoder, the motorized variable optical delay line offers a high delay resolution of 1 fs for both 330 and 560 pico-second models. These motorized...
 |
 |
Ultrafast Ti:Sapphire laser amplifier 12 W | Spitfire® Ace™ Newport / Spectra-Physics
Revolutionary XPert™ technology More than 12 W of output power Superior mode quality (M2 5.0 W of average power. To support todays demanding experiments, the system performance is guaranteed over extended periods of time, placing the Spitfire Ace in a...
 |
 |
Laser beam modulator Puls Picker JENOPTIK I Optical Systems
Integrated Optical Pulse Picker Fiber-coupled electro-optical light-modulator The Pulse Picker allows for a reliable reduction of high pulse laser repetition rates. To achieve this, a fiber-coupled electro-optical...
 |
 |
Laser ablation system GeoLasPro COHERENT
GeoLasPro for 193 nm LA-ICP-MS Solid Sample Analysis GeoLasPro makes the most out of todays advanced mass spectrometers. It provides unmatched energy densities ranging from below 1 J/cm² up to...
 |
 |
Electronic-gate optical shutter 25.20 mm | ESO CVI Melles Griot
Operates reliably in extreme temperatures (-40°C to +70°C) Proprietary low-friction, high-IR emissivity blade coating 25.2-mm clear aperture 12-V or 3-V solenoids Spring return; normally open or normally closed...
 |
 |
Laser amplifier 1.5 kW | NukW Nufern
NukW: Kilowatt Laser Amplifier Platform NukW — Harnessing Power Nufern's commitment to the development of state of the art high-power active fibers, requisite components and fiber integration has enabled us...
 |
 |
High energy laser mirror 1064, 532, 355, 266 nm; 0 - 45° Precision Photonics
R >99.9% at 0° or 45° for both s & p Ideal for high-power Nd:YAG and fiber laser applications Custom reflectivities to >99.998% Fast turn-around on custom coatings Advantages of Ion-Beam-Sputtered...
 |
 |
Laser mirror 266 – 1600 nm Research Electro-Optics
REO produces an extremely broad range of high reflector products, with a particular competency around precision components that combine low scatter and very high reflectivity. We use state-of-the-art superpolishing technology to fabricate flat, spherical and even cylindrical mirrors...
 |
 |
Laser mirror Nd:YAG Elliot Scientific
Our range of high power Nd:YAG mirrors have high reflectance coatings intended for laser beam...
 |
 |
Laser diode controller LDC500 series Stanford Research Systems
Introducing the LDC500 SeriesLaser Diode Controller — highly stable, low-noise current sources, with an integrated temperature controllers — all at very affordable prices. The LDC500 series...
 |
 |
Optical-parametric oscillator (OPO) 1064 nm, 10 W Qioptiq
Continuous-wave Optical Parametric Oscillator for laser spectroscopy Qioptiq's standard device, the OS 4500, is a compact, all-in-one continuous-wave laser source combining excellent spectral properties with an extremely large tuning range. Among its special features: - Single Frequency Operation - Narrow Linewidth -...
 |
 |
Variable pulse-duration laser driver max. 40 MHz, 375 - 1550 nm | PDL 800-B PicoQuant
* Repetition rates from single shot to 40 MHz (optional 64 or 80 MHz) * Laser pulse energy adjustable via driver unit * Laser heads with wavelengths from 375 nm to 1990 nm * LED heads with wavelengths from 255 nm to 600 nm * External trigger / sync output Applications * Time-resolved fluorescence...
 |
 |
Filter / mirror / lens holder Avantes
Variable In-Line Filter Holder For applications where just an in-line filter is needed, the...
 |
 |
Fiber optic modulator 10 Gb/s JDSU
The JDSU Agile Optical Components family includes modulators, switches, attenuators and tunable filters. These products provide the basis for spectrally efficient DWDM transmission utilizing dispersion tolerant modulation, channel monitoring, wavelength switching, remote power control and dynamic channel selection. They support...
 |
 |
Laser controller for tool setting LTS35.65 series M&H inprocess messtechnik
LTS35.65 – the standard Laser Tool Setter The standard laser tool setter for non-contact tool measurement, for reliable and quick machine setup, tool wear and tool breakage control....
 |
 |
Laser diode driver module Multiwave
Multiwave Photonics’ Compact Laser Diode Driver (cLDD) is a compact all-in-one unit designed for convenience of use, and combines a user interchangeable mount for a laser diode, SLED, SOA or similar device, a current...
 |
 |
Laser window MSLW Series MELLER OPTICS
MSLW Series plane parallel windows are designed for use in critical optical and laser applications where image quality and birefringence effects are important. The raw material...
 |
 |
Laser mirror 45° Ophir Optronics
Zero Phase Shift In most laser machines, one or several mirrors are used to forward the laser beam from the cavity to the working head. Usually, each...
 |
 |
Laser controller 0.1 - 20 mm | EG8030 PRECITEC
Electronics for precise distance measuring at high cutting speeds Applications: for all laser cutting applications with capacitive Lasermatic® (EG8030) and Lasermatic® Z (EG8110) distance sensor technology System types/Lasers:...
 |
 |
Laser controller UC-2000 SYNRAD
The UC-2000 Universal Laser Controller provides an easy user interface for total control of laser power, duty...
 |
 |
2-axis piezo steering mirror, optical deflection: Axsys Technologies
Our precision optical and mechanical manufacturing capabilities, combined with our electronic control technology enable us to produce high performance air-bearing image stabilization and steering devices. We employ finite element analysis to evaluate...
 |
 |
Laser projector Virtek LaserEdge System Gerber Technology
Three-dimensional laser templating system. Virtek® LaserEdge® accurately...
 |
 |
Electro-optic modulator e2v scientific instruments
e2v offers a range of compact modulator systems based around its patented solid-state switching technology. High power pulsed systems are developed for radar and for linear accelerators used in industrial, scientific and medical applications. The compact modulator is a direct switching...
 |
 |
MBE Linear Motion Shutters Faster action, longer life Get a fast-action alternative to integral shutters for controlling beam flux in molecular beam epitaxy (MBE) systems with Veeco linear motion shutters. The shutter is dampened...
 |
 |
Optical beam-combiner II-VI INFRARED
Beam combiners are partial reflectors that combine two or more wavelengths of light -- one in...
