|
|
| Products 121 to 150 of 272 |
Phantom v310 Camera
Vision Research sets a new standard for affordable, high-performance 1 megapixel digital high-speed cameras with the Phantom v310.
Take the wide view with our custom-designed 1280x800 CMOS sensor. The wide aspect ratio of the v310 allows you to keep moving subjects in-frame longer and see more of the event you are recording.
The v310 is controlled by our feature-rich Phantom Software. If you've used any Phantom camera before, you will know how to run the v310.
When you add Vision Research's CineMag and CineStation to your shoot you will be able to capture data at the highest throughput of the camera, down load it rapidly (i.e. 16 GB in approx 16 seconds), and have the camera ready for the next shot. This compares to 16 GB in 15 minutes or longer without the CineMag. Vist the CineMag product page.
The VRI Phantom v310 comes in two base models, either with or without a CineMag interface and comes in either color or monochrome configurations.
|
|
Phantom v9.1
As high-speed imaging systems have evolved over time, customers have begged for more speed and higher resolution. It is a real challenge to develop a system that offers both of these qualities. This is a difficult design task, and other critical parameters such as light sensitivity further complicate the issue of developing a fast, truly high resolution imaging system that is compact, user-friendly, and affordable.
One of the latest VRI responses to this speed/resolution challenge is our Phantom® v9.1. This camera supplies high speed recording along with resolution and image quality that would have been considered impossible to achieve just a short time ago.
If you have been looking for film quality images with speeds fast enough to meet you're most demanding requirements, take a serious look at the Phantom® v9.1.
|
|
|
|
|
|
Phantom HD 65 Camera
Our new Phantom digital widescreen cinema cameras aren't just about replacing film or video with some new technology, they're about creating a new way of seeing time.
The Phantom 65 lets you experience control over your shot in ways that you have never experienced in the past. With the Phantom 65, the 65mm cine frame now exists for you to experience in digital format.Exposure time is no longer dependent on the camera's frame rate or limited to a few shutter openings. The Phantom 65 lets you set the exposure time in increments of one microsecond. Apply shortened exposure times to achieve the look of a hard edge street video, or lengthened exposure times until you've captured the indefinable, unmistakable feel of film.
The Phantom 65 arrives with 8 Gigabytes of internal memory standard, 16 Gigabytes as an option. But this is just the start of methods we provide to store your work. Take advantage of the hot-swappable non-volatile solid state recorders -- our Phantom CineMags. These low profile modules mount snugly to the top of the camera body and store 256 or 512 Gigabytes each.
Digital imaging provides for multiple triggering and recording modes that can be tailored specifically for your application. Advanced camera setup and image file downloads using a common GB Ethernet connection are accomplished using a PC and the Phantom software. Image files can easily be converted to TIFF stacks, MOV, or AVI formats using this included software package.
|
|
Phantom v12 Camera
The Phantom V12.1 has the highest throughput of any CMOS-based digital high-speed camera. At a chosen resolution, you'll get the fastest possible frame rate. At a chosen frame rate, you'll get the highest possible resolution.
Add sub-microsecond exposure for controlling motion blur, industry-leading light sensitivity, and advanced features found on no other high-speed camera and you have the ideal solution for your high-speed imaging needs.
|
|
|
|
|
|
Phantom v5.2
Phantom® v5 series high-speed digital cameras have long been considered the workhorses of the Phantom® line, and our new v5.2 is set to continue this honored tradition.
Unlike the earlier v5's square image format, the v5.2 now offers a wider image window composed of 1152 x 896 pixels, supplying true megapixel full frame resolution. For most subjects this new rectangular aspect ratio will put more active pixels on your subject for higher image resolution.
The v5.2 is available in your choice of color or monochrome models supplying an impressive full-sensor recording speed of 1,000 frames per second, and reduced resolution settings provide rates of up to 148,148 fps.
The features you've come to expect on a Phantom® V-series camera are all there: Extreme Dynamic Range (dual-slope integration within a single frame), Continuously Adjustable Resolution (in 96x8 increments), Automatic Exposure, multi-cine recording, IRIG timing, and more.
The v5.2 is also rugged. The 1.5GB version is built for hi-g applications and does not require active cooling, optional higher capacity memory versions feature active cooling to maintain constant operating temperature and ensure highest picture quality. Plus, The v5.2 comes with a one year service contract bundled at no additional charge (optional extended coverage is also available).
If you are looking for a full featured high-speed digital imaging solution for your organization without breaking the budget, the new Phantom® v5.2 may be just what you have been waiting for.
|
|
|
|
|
|
Phantom HD Camera
This new Phantom is not just a high-speed camera, but an instrument that gives the cinematographer 35mm depth of field either at HD or 2K resolutions! The Phantom HD now combines the visual quality of high-definition imaging with the high frame rates of specialty cameras.
Whether your imaging needs encompass broadcasts of rapidly moving sports events, the production of commercials, a music video, an award-winning documentary, monitoring a rocket launch, or possibly you are an innovative cinematographer working on a special film project that needs "a new look" to tell the story, the flexibility and virtually limitless control of the HD will provide you with outstanding results.
The Phantom HD allows you to select any frame rate from 1 to 1,000 fps in increments of one frame per second at HD resolution. Shift the frame rate a little and move the scene to a slightly future viewpoint. Or shift the frame rate a lot and move the scene to some long passing moment in time. With the Phantom camera's shutter, variable to 1/500,000 second, and radically adjustable framing rates, you have seamless control of the duration, speed and time of a story element.
The HD can be configured for "live" broadcast or studio production and has a continuous video output that includes HD (720p, 1080p, 1080i) standards. Multiple triggering and recording modes can also be tailored to your application.
|
|
Lumenera's Lu075 High Speed USB 2.0 Industrial Camera
This high-speed USB 2.0 camera provides 60 fps at 640x480 pixels. Based on a high-quality 1/3" CCD sensor with fast global shutter - ideal for capturing objects in motion. Low light sensitivity provides capture in even low light conditions with 8 or 12 bit digital output. I/O control for synchronization with strobe and peripheral devices. Advanced camera functions are available through a comprehensive Software Developers Kit, with sample code and full technical support to quickly integrate camera functions into your application.
|
|
|
|
|
|
Now we like to present the new HPV-2 high-speed video camera extending capabilities through new technologies and additional features.
The HPV-2 is a PC-controlled camera. Up to four HPV-2's can be synchronised to obtain three-dimensional images or simultaneous images from four different perspectives.
Shimadzu HPV-2 offers ultra-high speed video recording up to one million frames per second (fps) and maintains the excellent spatial resolution at any recording speed. It comprises a new developed single-chip CCD image sensor (IS-CCD). This sensor allows capturing high-speed images even under (a relatively) weak illumination.
Features
* Up to 1 million frames per second frame rate
* Constant resolution regardless of the frame rate
* Capture up to 100 single frames
* Excellent performance under low illumination
The HPV-2 is suitable for wide-range applications in various fields of science and technology, for example, studies on hydrodynamics, destruction processes, shock wave development, visualizing machining processes as well as fast chemical reactions. In the field of life science, medical research and sport science, HPV-2 will be an important tool too.
Often, conventional high-speed video camera resolution drops down as recording speed is increased. The spatial resolution of the HPV-2 does not deteriorate, even at the highest frame rate. The camera maintains excellent 312 x 260-pixel resolution at all recording speeds permitting detailed analysis of high-speed phenomena.
Easy-to-use, multifunction software
|
|
Version 675 is the latest general release of the Phantom camera control software. This version includes support for the Phantom v12.1, v210, v310, v710, v640, Miro eX family and the 10Gb version of the CineStation as well as most other Phantom cameras, and includes many enhancements and support for new features like the internal and external mechanical shutters. It is a recommended upgrade for most Phantom users.
To see what is new, please read the Release Notes. Read back to the last revision you have installed to see all changes. Not all interim releases are made available for download, so your current release may be back a few pages.
To download this software, you must be an existing Phantom camera customer. Please be prepared to provide the serial number of one of your Phantom cameras for validation. After reviewing your request, we will send you an email with a URL to your personal download location.
|
|
|
|
|
|
|
The camera series of high-resolution digital cameras is based on variable camera electronics, low power consumption, advanced circuitry, and an extremely rugged design with an excellent signal quality at the same time. The integrator can choose between color or black-and-white systems, high-quality CCD sensors by Sony and Kodak with megapixel resolution and various interfaces (FireWire/ IIDC compatible, CameraLink, GigE). The digital PS cameras have been designed especially for software integrations. The matching Kappa sdk3 offers state-of-the-art software environment based on .net and C-API. Together with the sdk or the detailed interface description the PS cameras convince as high-performance components in all measuring and testing machines.Kappa provides machine vision cameras with top-quality Sony sensors or with Kodak sensors with high refresh rate and square pixel matrix. The machine vision cameras offer highly linear, low-noise signal processing in real time. There is a wide choice of interfaces: RS 422, FireWire, CameraLink, Gigabit Ethernet, USB, HD-SDI, LVDS, video etc... The machine vision cameras from Kappa offer high frame rates and megapixel resolution. With 12 bit digitization depth, raw data and a parametrizable signal processing the machine vision cameras provide numerous measurement advantages. The machine vision cameras are compatible with common image processing software solutions. Machine vision cameras are designed for integration into machines and systems.
|
|
|
The Pantera TF 11M4 is an advanced, full frame camera that offers a unique combination of megapixel resolution, fast frame rate, large bit-depth, and a Camera Link™ interface. The camera's data rate of up to 2 x 36 MHz provides incredible throughput while its 4008 x 2672 pixel resolution enables you to reduce the number of cameras required for large-area surface scanning. With up to 14 bits of output, this camera is capable of discerning the tiniest differences between gray scales. The DALSA-made sensor used in the Pantera TF 11M4 has extremely low noise eliminating the need for voluminous and costly cooling mechanisms.
|
|
|
|
|
|
See incredible resolution with this USB 2.0 camera, providing 3.5 fps at 4008x2672 pixels. Based on a high-quality 43.3mm CCD sensor with global shutter. Unique 10.7 megapixel sensor provides incredible sensitivity with large 9µm pixels and with 12 bit, >65dB dynamic range . I/O control for synchronization with strobe and peripheral devices. Advanced camera functions are available through a comprehensive Software Developers Kit, with sample code and full technical support to quickly integrate camera functions into your application. 3 different lens mount options available: Canon-Mount, F-Mount, K-Mount
CAMERA SENSOR
Image Sensor 43.3 mm (diagonal) format, color or mono, 36.1mm x 24.0mm array
Effective Pixels 4008 x 2672, 9.0ìm square pixels
Frame Rate 3.5 fps at 4008x2672
Sensitivity Excellent
Dynamic Range >65dB
White Balance Auto / Manual
Dimensions (W x H x D) Lw11059 – 3.25 x 2.98 x 5.59 inches
Lw11058 – 3.25 x 2.98 x 5.61 inches
Lw11057 – 3.25 x 2.98 x 5.56 inches
Mass 850g
Power Requirement External 12VDC, 2A (included)
Power Consumption ~18.7 Watts
Operating Temperature 0° C to +50° C
Operating Humidity 5%-95%, Non-condensing
Interface Connector Standard USB 2.0
Lens Mount Canon-Mount, F-Mount, K-Mount
Frame Buffer 1 frame buffer (optional expansion to 6 frames)
|
|
The CoolView VHR is a high resolution CCD camera which has 4000x2672 pixels and interline transfer architecture which allows the CCD to operate without a shutter and at 100% duty cycle. The CCD has a high quantum efficiency of typically 45% @ 550nm.
The camera is deep cooled with DT of 35°C, and uses a Peltier with secondary air cooling. A water cooled version for deeper cooling is also available. The camera has a fast 10MHz readout rate with digitisation to 12 bits and also features a high dynamic range 16-bit mode. The camera features on chip binning and sub area readout.
|
|
hsfc pro
Having a single optical input, this camera system comprises a image splitter unit, four intensified CCD camera modules with fast switchable MCP image intensifiers and high resolution CCD image sensors. Each module with its 12 bit dynamic range and a high resolution CCD image sensor features an excellent signal-to-noise-ratio and the ability of single photon detection. Four high speed serial fiber optic data links connect the system to the PC. It can be triggered externally by light or electrical input.
|
|
dicam pro
This is a high performance intensified CCD camera system with gating times down to 1.5 ns. With its 12 bit dynamic range and a high resolution CCD image sensor it features an excellent signal-to-noise-ratio and the ability of single photon detection. The system is suited for applications in environments with high electromagnetic disturbances. A high speed serial fiber optic data link connects the system to the PC. The camera can be triggered by light or electrical input.
|
|
|
|
|
|
CoolView IDI:
The CoolView IDI features a 1392 x 1040 pixel CCD coupled, by the latest bonding technology, to a specially-developed high resolution image intensifier. Spectral response can be chosen for red, green or blue peak response. A gated version with 5ns gating is also available.
ISIS-4:
The ISIS-4 is an ultra-high gain intensified CCD camera with a double micro-channel plate image intensifier, allowing photon-counting efficiency and ultimate sensitivity. The image intensifier features an extremely low noise photocathode even without cooling, and the optimised electron-optical design produces detection efficiencies in excess of those achieved with standard GaAS (‘third generation’) photocathodes. CCIR or EIA readout.
ISIS-4/1000:
The ISIS-4/1000 is designed for very fast imaging applications and uses camera electronics to provide 1000 frames per second CCD. The double MCP is used to provide sufficient flux, and combined with manual gain control can be used in a variety of light levels from photon counting to fast dynamic imaging at higher light levels. The camera system can be provided with a frame grabber PC and software to provide a complete imaging solution.
ISIS-3:
The ISIS-3 is an intensified camera with the latest image intensifier technology. The use of high resolution MCPs and the technique of using a fibre optic taper to couple the intensifier to the CCD results in excellent image quality.
|
|
sensicam qe
This high performance cooled digital 12 bit CCD camera system comprises advanced CCD and electronics technology. The system features thermo-electrical cooling of the image sensor (down to – 12 °C), extremely low noise (down to 4 e- rms) and an outstanding quantum efficiency, which achieves a high spectral sensitivity in general and especially in the NIR. Exposure time modes (software selectable) range from 500 ns (fast shutter) to 3600 s (long exposure). A high speed serial data link connects the system to the PC (fiber optic link available). This low light camera system is perfectly suited for many sensitive and low noise imaging applications, such as fluorescence imaging, confocal & light microscopy etc..
|
|
|
|
|
|
The World's Smallest Video Cameras.
Medigus offers the world's smallest micro cameras. The current offering includes a new revolutionary disposable CMOS camera, which has an outer diameter of only 1.2mm x 5mm long and is by far the smallest camera in the world. In addition the company offers reusable CCD cameras in two sizes: 3.0mm x 3.0mm and 1.8mm x 1.8mm.
The outer diameter size of the recently announced revolutionary disposable camera is only 1.2mm x 5mm long and it by far the smallest video camera in the world. The camera, which is based on an advanced CMOS image sensor, offers high performance at a low cost and combines superb sensitivity, resolution and dynamic sensitivity. The camera is completely disposable eliminating the need for the very costly sterilization process commonly associated with endoscopic procedures. As such, the camera is designed to be incorporated into disposable endoscopes or used in various diagnostic and surgical medical procedures.
The camera is also suitable for industrial applications and can be integrated into borescope, devices for Remote Visual Inspection (RVI), Non-destructive Testing (NDT), Machine Vision systems etc.
In addition, Medigus' CCD cameras (3.0mm x 3.0mm and 1.8mm x 1.8mm) offer excellent image quanlity and are suitable for both medical and industrial applications.
|
|
|
|
|
|
The World's Smallest Video Cameras.
Medigus offers the world's smallest micro cameras. The current offering includes a new revolutionary disposable CMOS camera, which has an outer diameter of only 1.2mm x 5mm long and is by far the smallest camera in the world. In addition the company offers reusable CCD cameras in two sizes: 3.0mm x 3.0mm and 1.8mm x 1.8mm.
The outer diameter size of the recently announced revolutionary disposable camera is only 1.2mm x 5mm long and it by far the smallest video camera in the world. The camera, which is based on an advanced CMOS image sensor, offers high performance at a low cost and combines superb sensitivity, resolution and dynamic sensitivity. The camera is completely disposable eliminating the need for the very costly sterilization process commonly associated with endoscopic procedures. As such, the camera is designed to be incorporated into disposable endoscopes or used in various diagnostic and surgical medical procedures.
The camera is also suitable for industrial applications and can be integrated into borescope, devices for Remote Visual Inspection (RVI), Non-destructive Testing (NDT), Machine Vision systems etc.
In addition, Medigus' CCD cameras (3.0mm x 3.0mm and 1.8mm x 1.8mm) offer excellent image quanlity and are suitable for both medical and industrial applications.
|
|
|
|
|
|
Key points
- Ultra-small
- Excellent antiblooming characteristics
- Continuous variable-speed shutter
- High sensibility and low dark current
We offer as standard 2 devices: 1/6" and 1/10":
1/6" LYNX 59.60/LYNX 59.90 (respectively offering field of vision angles of 50° and 90°)
- Interline CCD image sensor
- Image size: Diagonal 3mm (Type 1/6)
- Number of effective pixels: 752 (H) x 582 (V) approx. 440K pixels
- Total number of pixels: 795 (H) x 596 (V) approx. 470K pixels
- Chip size: 3.30mm (H) x 2.95mm (V)
- Substrate material: Silicon
- Cable: length: 4.5m - ø 3mm (ø 2.1mm without plastic sheath)
- Head: ø 5.9mm - length: 20mm
1/10" LYNX 34.90
- Interline CCD image sensor
- Image size: Diagonal 1.8mm (Type 1/10)
- Number of effective pixels: 510 (H) x 492 (V) approx. 290K pixels
- Total number of pixels: 537 (H) x 505 (V) approx. 320K pixels
- Chip size: 2.00mm (H) x 2.00mm (V)
- Unit cell size: 2.90µm (H) x 2.25µm (V)
- Substrate material: Silicon
- Cable: length: 4.5m - ø 3mm (ø 2.1mm without plastic sheath)
- Head: ø 3.4mm - length: 16.5mm
|
|
Micro CCD Cameras
These cameras are very small in size. They are typically used when space is at a premium. Micro Cameras have a single CCD sensor and typically are a split head design, but not always. Older, discontinued cameras and cables may still be available.
|
|
The Pix-Cell Camera is a high performance, programmable Cellular Single Board Controller, that offers built-in digital and analog I/O combined with GSM/GPRS connectivity in a compact form factor. With this GSM camera it is possible to take a picture and send it all over the world.
Features:
- Small Size: 95x60x15mm.
- JPEG resolution 640x480, 320x240.
- Remote camera activation through SMS or short call.
- Microchip PIC18F6722 controller at 32MHz.
- 128KB Flash for user memory application.
- 32kB of EEPROM Memory.
- 3 Protected Digital Inputs.
- 3 10-bit Analog Inputs.
- RS232 serial communication.
|
|
|
|
|
|
The World's Smallest Video Cameras.
Medigus offers the world's smallest micro cameras. The current offering includes a new revolutionary disposable CMOS camera, which has an outer diameter of only 1.2mm x 5mm long and is by far the smallest camera in the world. In addition the company offers reusable CCD cameras in two sizes: 3.0mm x 3.0mm and 1.8mm x 1.8mm.
The outer diameter size of the recently announced revolutionary disposable camera is only 1.2mm x 5mm long and it by far the smallest video camera in the world. The camera, which is based on an advanced CMOS image sensor, offers high performance at a low cost and combines superb sensitivity, resolution and dynamic sensitivity. The camera is completely disposable eliminating the need for the very costly sterilization process commonly associated with endoscopic procedures. As such, the camera is designed to be incorporated into disposable endoscopes or used in various diagnostic and surgical medical procedures.
The camera is also suitable for industrial applications and can be integrated into borescope, devices for Remote Visual Inspection (RVI), Non-destructive Testing (NDT), Machine Vision systems etc.
In addition, Medigus' CCD cameras (3.0mm x 3.0mm and 1.8mm x 1.8mm) offer excellent image quanlity and are suitable for both medical and industrial applications.
|
|
The World's Smallest Video Camera for endosocpes.
The outer diameter size of this recently announced revolutionary disposable camera is only 1.2mm x 5mm long and it by far the smallest video camera in the world. The camera, which is based on an advanced CMOS image sensor, offers high performance at a low cost and combines superb sensitivity, resolution and dynamic sensitivity.
The camera is completely disposable eliminating the need for the very costly sterilization process commonly associated with medical endoscopic procedures. As such, the camera is designed to be incorporated into disposable endoscopes or used in various diagnostic and surgical medical procedures.
The camera is also suitable for industrial applications and can be integrated into borescope, devices for Remote Visual Inspection (RVI), Non-destructive Testing (NDT), Machine Vision systems etc.
|
|
|
|
|
|
The World's Smallest Video Cameras.
Medigus offers the world's smallest micro cameras. The current offering includes a new revolutionary disposable CMOS camera, which has an outer diameter of only 1.2mm x 5mm long and is by far the smallest camera in the world. In addition the company offers reusable CCD cameras in two sizes: 3.0mm x 3.0mm and 1.8mm x 1.8mm.
The outer diameter size of the recently announced revolutionary disposable camera is only 1.2mm x 5mm long and it by far the smallest video camera in the world. The camera, which is based on an advanced CMOS image sensor, offers high performance at a low cost and combines superb sensitivity, resolution and dynamic sensitivity. The camera is completely disposable eliminating the need for the very costly sterilization process commonly associated with endoscopic procedures. As such, the camera is designed to be incorporated into disposable endoscopes or used in various diagnostic and surgical medical procedures.
The camera is also suitable for industrial applications and can be integrated into borescope, devices for Remote Visual Inspection (RVI), Non-destructive Testing (NDT), Machine Vision systems etc.
In addition, Medigus' CCD cameras (3.0mm x 3.0mm and 1.8mm x 1.8mm) offer excellent image quanlity and are suitable for both medical and industrial applications.
|
|
The World's Smallest Video Camera for endosocpes.
The outer diameter size of this recently announced revolutionary disposable camera is only 1.2mm x 5mm long and it by far the smallest video camera in the world. The camera, which is based on an advanced CMOS image sensor, offers high performance at a low cost and combines superb sensitivity, resolution and dynamic sensitivity.
The camera is completely disposable eliminating the need for the very costly sterilization process commonly associated with medical endoscopic procedures. As such, the camera is designed to be incorporated into disposable endoscopes or used in various diagnostic and surgical medical procedures.
The camera is also suitable for industrial applications and can be integrated into borescope, devices for Remote Visual Inspection (RVI), Non-destructive Testing (NDT), Machine Vision systems etc.
|
|
The World's Smallest Video Camera for endosocpes.
The outer diameter size of this recently announced revolutionary disposbale camera is only 1.2mm x 5mm long and it by far the smallets video camera in the world. The camera, which is based on an adavanced CMOS image sensor, offers high performance at a low cost and combines superb sensitivity, resolution and dynamic sensitivity.
The camera is completely disposable eliminating the need for the very costly sterilization process commonly associated with medical endoscopic procedures. As such, the camera is designed to be incorporated into disposable endoscopes or used in various diagnostic and surgical medical procedures.
The camera is also suitable for industrial applications and can be integrated into borescope, devices for Remote Visual Inspection (RVI), Non-destructive Testing (NDT), Machine Vision systems etc.
|
|
|
|
|
|
The World's Smallest Video Cameras.
Medigus offers the world's smallest micro cameras. The current offering includes a new revolutionary disposable CMOS camera, which has an outer diameter of only 1.2mm x 5mm long and is by far the smallest camera in the world. In addition the company offers reusable CCD cameras in two sizes: 3.0mm x 3.0mm and 1.8mm x 1.8mm.
The outer diameter size of the recently announced revolutionary disposable camera is only 1.2mm x 5mm long and it by far the smallest video camera in the world. The camera, which is based on an advanced CMOS image sensor, offers high performance at a low cost and combines superb sensitivity, resolution and dynamic sensitivity. The camera is completely disposable eliminating the need for the very costly sterilization process commonly associated with endoscopic procedures. As such, the camera is designed to be incorporated into disposable endoscopes or used in various diagnostic and surgical medical procedures.
The camera is also suitable for industrial applications and can be integrated into borescope, devices for Remote Visual Inspection (RVI), Non-destructive Testing (NDT), Machine Vision systems etc.
In addition, Medigus' CCD cameras (3.0mm x 3.0mm and 1.8mm x 1.8mm) offer excellent image quanlity and are suitable for both medical and industrial applications.
|
|
The World's Smallest CCD Video Cameras for medical endosocpes.
Medigus manufactures micro CCD video camera systems with either a 3.0mm x 3.0mm or a 1.8mm x 1.8mm camera head, the latter being the world's smallest CCD camera.
The cameras are ready for integration into various visulaization and inspection devices, such as medical endoscopes. The cameras are designed for integratation into endoscopes by companies that manufacture endsocopes.
Applications for the cameras include colonoscopy, gastroscopy, nasopharyngoscopy, laryngoscopy, ureteroscopy, cystoscopy, laparoscopy, bronchoscopy, arthroscopy, urology, gynecology, bronchoscopy, ERCP etc.
The cameras are the proprietary technology of Medigus Ltd.
|
|
|
|
|
|
The World's Smallest Video Cameras.
Medigus offers the world's smallest micro cameras. The current offering includes a new revolutionary disposable CMOS camera, which has an outer diameter of only 1.2mm x 5mm long and is by far the smallest camera in the world. In addition the company offers reusable CCD cameras in two sizes: 3.0mm x 3.0mm and 1.8mm x 1.8mm.
The outer diameter size of the recently announced revolutionary disposable camera is only 1.2mm x 5mm long and it by far the smallest video camera in the world. The camera, which is based on an advanced CMOS image sensor, offers high performance at a low cost and combines superb sensitivity, resolution and dynamic sensitivity. The camera is completely disposable eliminating the need for the very costly sterilization process commonly associated with endoscopic procedures. As such, the camera is designed to be incorporated into disposable endoscopes or used in various diagnostic and surgical medical procedures.
The camera is also suitable for industrial applications and can be integrated into borescope, devices for Remote Visual Inspection (RVI), Non-destructive Testing (NDT), Machine Vision systems etc.
In addition, Medigus' CCD cameras (3.0mm x 3.0mm and 1.8mm x 1.8mm) offer excellent image quanlity and are suitable for both medical and industrial applications.
|
|
|
|
Industrial video cameras
