|
|
| Products 121 to 150 of 191 |
Rheintacho's tried and tested hand-held units record rotational speeds and run lengths. Some of them use a proximity system by shining a light beam on a reflective mark; others use a contact system with special adapters for different applications.
The new hand-held stroboscope measures rotation and vibrations even in the most inaccessible places. No physical intervention is required on the systems to be tested. If the stroboscope flash frequency matches the frequency of movement, the test object appears stationary.
|
|
Technical Highlights:
– Up to 40 000 Flashes per
minute (FPM) xenon
– Accuracy: 0,05 % of the
applied value
– Display with backlight
Resolution of SC models:
0.1 FPM 1000 FPM
Power supply 4 x 1.5 V AA Batteries
Internal memory for 10 commonly used
rotation frequencies (only SB 40K0.1)
Fast check x 2 /2 for quick range control
Quick-Set Function H/L to avoid the
time-consuming adjustment
Application:
When the speed or the
rotation of a moving object
matches the flash rate of
the stroboscope, the moving
object appears still.
The instrument can give the
user the illusion of “stopped
motion”, when the
observed object is actually
in a moving state.
Auto-Stop function: Turns
the instrument off after 5
min to conserve the strobe light.
By adjusting the flashing
rate until the observed
object is perfectly standing,
the operator can
• measure the speed or the
rotations frequency of the
object contact-free
• study a process in action
|
|
SL10
ENTRY LEVEL - LOW PRICE - THE BEST PERFORMANCES/PRICE RATIO RECHARGEABLE BATTERY POWER SUPPLY
- Combines goods performances with the advantages of compact dimension and low price
- Flash frequency up to 10.000 flashes/min
- Flash control by internal oscillator
- Frequency regulation quick and precise with two potentiomaters for coarse and fine adjustment
- Large dot matrix LCD display for easy RPM readout
- Rechargeable battery power supply
- Double AC/DC power supply (by means of the supplied AC adapter) : 220Vac + internal rechargeable battery
- Manual control of brightness of flash lamp on two intensity (Extra Light function)
- Light-weight and small dimension for hand-held operations
- Simple to use
- Compact, rugged, reliable
- Encased in a rugger, high-impact plastic housing
- Supplied with charger and carrying case
- Fully complies with CE directives
|
|
|
|
|
|
DGT25M
AT THE TOP OF THE BINTSTROBE RANGE - HIGH CHARACTERISTICS
AND PERFORMANCES FOR USERS WITH HIGH REQUIREMENTS
- At the top of BINTSTROBE range, a complete and reliable professional stroboscope with high characteristics and performances
- Range up to 25.000 flashes/min (over range until 200.000 flashes/min using DIV function)
- Frequency regulation quick and precise with two potentiomaters for coarse and fine adjustment
- Speed readout in RPM and Hz, with tachometer function
- Flash control by internal oscillator and by external trigger
- Large dot matrix LCD display for easy RPM readout
- High brightness of flash lamp
- Automatic control of brightness on two intensity
- Dividing function :2 :4 :8 permits observations of fast movements at lower flashes frequencies, with higher flash brightness and longer life of xenon lamp
- Phase-shifter circuit, to obtain the angle of observation into the most favourable position on 360°
- Standard 0-5V TTL output, to connect external devices
- RS232 output available as optional
- Available with internal or separate lamp : it is possible adding up to 5 separated Lamp
- DGT25M/IL : with internal lamp
- DGT25M/EL : with external separate lamp : a remote Control Unit and one or more separate Lamp; lenght of cable betwenn Control Unit and Lamp can be over 20 meters, to positioning instrument and Lamp into different rooms
- 220Vac-50/60Hz power supply
- Rugged and reliable
- Compact, light-weight
- Encased in a rugged, high-impact plastic housing, with handle for the best portability
- Supplied with carrying case
- Fully complies with CE directives
|
|
|
|
|
|
DS5
HIGH BRIGHTNESS AND COMPACT DIMENSION
RECHARGEABLE BATTERY POWER SUPPLY
- Portable stroboscope with high brightness and small dimension
- Ideal whenever it is necessary good brightness and high portability
- Flash frequency up to 5.000 flashes/min
- Flash control by internal oscillator and external trigger, with tachometer fucntion
- Frequency regulation quick and precise with two potentiometers for coarse and fine adjustment
- Large dot matrix LCD display for easy RPM readout
- Dividing function :2 :4 permits observations of fast movements at lower flashes frequencies, with higher flash brightness and longer life of battery charge and xenon lamp
- Rechargeable battery power supply
- Double AC/DC power supply (by means of the supplied AC adapter) : 220Vac + internal rechargeable battery
- Phase-shifter circuit, to obtain the angle of observation into the most favourable position on 360°
- Manual control of brightness of flash lamp on two intensity (Extra Light function)
- Light-weight and small dimension for hand-held operations
- Simple to use
- Compact, rugged, reliable
- Encased in a rugged, high-impact plastic housing
- Supplied with charger and carrying case
- Fully complies with CE directives
|
|
|
|
|
|
SL20
FAST MOTIONS - THE PORTABLE WITH HIGH PERFORMANCES
RECHARGEABLE BATTERY POWER SUPPLY
- Suitable for observation of fast motions
- Range up to 20.000 flashes/min
- Flash control by internal oscillator and by external trigger, by tachometer function
- Frequency regulation quick and precise with two potentiometers for coarse and fine adjustment
- Large dot matrix LCD display for easy RPM readout
- Phase-shifter circuit, to obtain the angle of observation into the most favourable position on 360°
- Dividing function :2 :4 :8 permits observations of fast movements at lower flashes frequencies, with higher flash brightness and longer life of battery charge and xenon lamp
- Rechargeable battery power supply
- Double AC/DC power supply (by means of the supplied AC adapter) : 220Vac + internal rechargeable battery
- Automatic control of brightness of flash lamp on two intensity
- Good brightness also at high frequencies
- Light-weight and small dimension for hand-held operations
- Simple to use
- Compact, rugged, reliable
- Encased in a rugger, high-impact plastic housing
- Supplied with charger and carrying case
- Fully complies with CE directives
|
|
Thick Wall Flexible Fused Silica Capillary Tubing
TSP Characteristics
• Standard polyimide coating
• Synthetic fused silica
• 100% proof tested at 100kpsi**
• Operation up to 350°C
Advantages
• Thick wall provides added mechanical strength during and after packing.
• Exacting ID tolerances minimize column-to-column variations.
• Durable polyimide provides good chemical and abrasion resistance.
• Easily cleaved to the desired length
The initial product offering includes four standard sizes, all with a common OD of 665µm. ID's vary from 150µm up to 300µm. Production of custom sizes to meet your exact product requirements are available upon request.
|
|
|
|
|
|
Lumat LB 9507 Tube Luminometer
The Lumat LB 9507 tube luminometer provides the sensitivity and versatility you need in a general purpose luminometer. Advanced tube-based photon counting provides an extended dynamic range with linearity over more than six decades. A DLReady™ instrument, the Berthold Lumat is ideally suited for reporter gene assays, and other luminescence research and diagnostics applications.
Key features
Variable volume injectors. The Lumat features reagent injectors providing the highest reliability and simplicity in liquid handling. Based on the jet injection principle the injectors combine high speed and precision of the injected volume with the reliable mixing of reagents. The injected reagent volume is programmable within the range of 25 µl to 300 µl.
Designed to withstand corrosive reagents the Lumat’s variable volume injectors are also optimized to reduce dead volume; an important consideration when using expensive reagents.
Unique measurement chamber design The measurement chamber is designed to enable rotating sample transport. You can load a second sample while the first one is being measured, thus saving time which results in throughputs approaching those of an automatic instrument. The special design of measurement chamber provides superior light collection efficiency.
Measurement modes
The built-in 32-bit software has been developed to provide easy, intuitive operation of the instrument’s powerful features. You can choose from a variety of basic measurement protocols.
Raw data protocol
Dual label protocol
Kinetic measurements
Cut-off protocol
Quantitative protocol (LIA, ILMA)
|
|
OAI's Model 306 UV Power Meter is a highly reliable direct reading Instrument designed expressly for measuring light intensity at the wafer plane of mask aligners, UV curing light sources, and any other UV light source. Special probes enable measurement of light in the visible range. Calibration accuracy is within +/- 3% and is NIST traceable. Measurement repeatability is within /- 1%. It is auto ranging from 0.1 to 1999 mw/cm2 full scale and has 1% linearity in this range. This instrument features meter to meter matchability.
|
|
|
These UV power meters are designed to measure and monitor the absolute optical power (mW/cm2) in the UV to vacuum UV region. These UV meters allow accurate UV measurement and control based on NIST standards for applications such as surface reforming and UV sterilization using excimer lamps or low-pressure mercury lamps, UV curing and semiconductor photolithography. UV power meters come with 6 types of sensor heads according to the wavelength needed.
|
|
Precision Windowed Silica Capillary Tubing
Polymicro Technologies is your source for windowed capillary routinely used in CE and other analytical applications. Our non-abrasive laser technique provides strong, clean, durable windows. Whether your using our standard polyimide coated, synthetic fused silica capillary tubing, or a custom drawn capillary, let Polymicro do the windows.
Advantages
• Offers an excellent window for CE applications
• Extremely strong window and smooth coating transition areas
• Excellent optical surface, without damage normally resulting from abrasion or acid etching
• Easily cleaved to needed application length
• Low background fluorescence
|
|
| ... products without technical information |
| |
|
|
Optical measurement instruments
