|
|
Konica Minolta, a global leader in optical technology, manufactures a complete line of light meters and spot meters to measure luminance, illuminance, chromaticity values, color temperature in Kelvin, and UV radiation.
Konica Minolta light meters are hand-held, battery operated, and lightweight. Several measure continuous and flickering light sources; others are capable of non-contact measurement of light sources or reflective surfaces. Konica Minolta's light and spot meters measure in lux and foot-candles, or foot lamberts and CD/m
|
|
|
|
|
|
Digital Light meter ( DLM 530 , DLM 531)
Digital Light meter :
ModelFDLM 530 Lux meter (Range : From 20 to 200,000 Lux )
Model: DLM 531 Lux/ Footcandle Meter
(Range : 20 Lux,200 lux, 2000 lux, 20,000 Lux; 20fc, 200fc, 2000fc, 20,000fc)
MDOEL : DLM 536 Datalogging light meter
DLM 530 Features:
For Simple One Hand Operation
Accurate Visible Compensation Filter ff1 is Used.
CIE ():ff1<2%,<3%,<5%,<8%,v()Match
Cosine Response:ff2<2%
Range : From 20 to 200,000 Lux
Analog Output Standard
Valox Housing to Withstand Accidental Drops
Digital and Analog Output Function
Highly accurate ff1 Compensation and Diffuser ff2<2%
MAX/Data Hold Function
Backlit LCD Display
DLM531 Features:
For Simple One Hand Operation
Accurate Visible Compensation Filter ff1 is Used.
CIE ():ff1<2%,<3%,<5%,<8%,v()Match
Cosine Response:ff2<2%
Range : 20 Lux,200 lux, 2000 lux, 20,000 Lux ; 20fc, 200fc, 2000fc, 20,000fc
Analog Output Standard (output impedance 500 ohm)
Valox Housing to Withstand Accidental Drops
Digital and Analog Output Function
Highly accurate ff1 Compensation and Diffuser ff2<2%
Peak Data Hold Function
Backlit LCD Display
High Accuracy : }3%rdg+10dgts
3 1/2 digit LCD display with a maximum reading of 1999
Automatic Zero
MODEL DLM 536
Spectrum of photo sensor meets C.I.E.
photopic curve V(l)
16000 Records Data logging capacity
RS-232 interface (software included)
Measurement of luminous intensity
(PC Software)
|
|
|
Our cal-LIGHT 400 Calibrated Digital Light Meter uses a silicon photodiode sensor corrected to measure exactly like the human eye sees. Ergonomically designed for one-hand use. Simply Point..click..Done. Autoranging from 0.1fc or lux to 40,000fc or lux. Calibrated to NIST Standards. Three versions available: standard, back-lit or front-facing sensor. All come complete with instructions, battery, carrying case, integral stand and calibration certificate, CE Certified.
|
|
Description:
The model H100 is an ideal meter for measuring light levels in both lux and foot-candle units of measure. The meters wide measuring range allows it to be used in many applications such as interior design, photography, energy audits and installation of electrical fixtures. It is perfect for general applications, including measuring lighting levels in the home, office, restaurant, school, etc.
Features:
* Large LCD display with bar graph
* Wide measurement ranges: 40.00/400.0/4,000/40,000/400,000lux
* Display resolution: 0.04lux to 100lux, 0.01fc to 10fc (foot-candle = fc)
* 4 light type select (Tungsten, Fluorescent, Sodium or Mercury)
* Sensor meet C.I.E. spectrum, 2 filters
* Data hold, Record (max., min.)
* lux or foot-candle unit selection
* Longer battery life compared to 9V
* Displays values in both lux or foot-candle
* Two year warranty
Applications:
* Science experiments
* Photography
* Manufacturing
* Agriculture
* Artistry
|
|
|
The latest generation of Konica Minolta lux meters, the T-10, replaces the globally successful models of the T-1 series. The small, easy-to-use handheld meters are capable of measuring intermittent light sources, can be connected to each other to form multi-point units, and are easily controlled with a PC. They have an extremely large measuring range of 0.01 to 299,000 1x with automatic range switching, and a large, backlight LCD. And all of that with Konica Minolta's renowned high level of precision in a small, compact design
|
|
CA813 Lightmeters
The Lightmeter Model CA813 is a portable, easy-to-use instrument which features optical sensors that are designed to match the response of the human eye, making them ideal instruments for workspace analysis and planning. The ergonomically designed case, large display and intuitive function selection make this instrument the right choice for any application.
The Lightmeter Model CA813 is designed for simple one-hand operation. It provides selectable lux or footcandle units for display and features a 3 1/2 digit backlit LCD and HOLD function. The Model CA813 offers a PEAK function.
|
|
Protected by a shockproof sheath in a compact case, the Physics Line CA 811 lightmeter measures lighting between 20 and 20,000 lux.
# 3-digit display (2,000 counts)
# measurement range: 20 to 20,000 lux
# measurement by silicon photodiode
# resolution: 0.01 lux
# functions: HOLD / Backlighting / lux or fc /Max
# accuracy 3%R + 10 counts
# I.E.C. spectral correction and incidence correction
# remote-controlled probe for all types of measurements
# shockproof protective sheath
# dimensions: 173 x 60.5 x 38mm - weight: 214g
|
|
|
|
|
|
The Radiant Imaging SIG-300 is a Source Imaging Goniometer System used to precisely characterize the near-field output of a light source, and then create a Radiant Source Model from the acquired data. The system consists of a fully automated, computer-controlled goniometer system and a Radiant Imaging PM-1400 or PM-1600 Series Photometer/Colorimeter.
In operation, the host computer varies the orientation of the light source relative to the Photomer/Colorimeter, which captures images and flux measurements from thousands of angular viewpoints around the source. This data is used to create the Radiant Source Model file, which is compatible with our ProSource software. Ray sets generated by ProSource can be imported to any other optical and illumination system design software package. This comprehensive measurement approach delivers significantly more accurate results than the traditional method based on a constructed model.
SIG-300 Benefits
- Turnkey operation for simplicity
- High precision results
- Widely compatible data files
- Provides detailed source analysis useful for R&D
|
|
|
|
|
|
The spot luminance meters LS-100 and LS-110, categorized in the upper range of the DIN quality class B, are among the best hand meters on the market. The SLR (single lens reflex) optical system allows precise targeting and ensures the viewfinder showing the exact area to be measured, even at very short distances. This makes even precise focussing very easy. In addition to the measurement field and the measurement environment, the viewfinder also shows the measured luminance value. The pistol grip makes handling of the unit very secure. We paid special attention to minimize flare and to give precise V(lambda) correlation (CIE relative photopic luminosity curve). With the help of a close-up lens, areas as small as 0.4mm diameter can be measured.
Areas of application
Light sources of all types can be measured with the LS, for example signal, traffic lights, airport lighting, lamps, LEDs, picture tubes, etc., simply anything that emits light. Now you can, for example, guarantee minimum brightness, exchange lamps that are too dark, create quality assurance in the production of lamps, or check indirectly illuminated objects like movie screens.
|
|
|
Our cal-SPOT 401 is a Calibrated Spot Measuring Brightness Meter, autoranging from 0.1 to 400,000 cd/m**2, has a 1 degree measuring field, and a 12 degree FOV. Using a high stability silicon photodiode sensor, and no magnification, it provides standard human eye response, and can be used with both eyes open. Comes complete with instructions, battery, carrying case and calibration certificate.
|
|
A handy, special measuring instrument for professional use in industrial, commercial and service applications, for special testing and inspection in accordance with existing safety regulations, for example at workstations with monitor screens, and in the fields of medical engineering and office technology.
The precision digital measuring instrument for measuring luminance is placed directly onto self-luminous surfaces, or surfaces through which light is passed, such as monitors (CRT/LCD, background illumination), TV screens, light tables, trough luminaires, illuminated advertising surfaces, traffic signs and viewing screens.
|
|
|
|
|
|
The Triathler luminometer is a compact, portable, manual instrument for measuring samples in various vial sizes up to 20 mL in volume, with extreme sensitivity.
Key characteristics:
- Large dynamic range, (200 CPS to 50,000,000 CPS)
- High sensitivity, less than 10 amol ATP / measurement
- Portable or regular laboratory use
- 32 character alphanumerical display
- RS-232 port to send out results to a PC or a printer
- Software for MS WindowsR to download the results to file or MS Excel worksheet is included
- 1.5 " head-on PM tube makes very high counting sensitivity possible
- Counting times from 0.1 seconds to 99999 minutes
- Power input: 12V DC, 1.5 A or 100 .. 240 V AC, 50/60Hz
- Mechanical data: H 190 mm, D 330 mm, W 250 mm, weight 8 kg
Delivered with:
- Owners Handbook
- Adapter for 7 mL minivial (black)
- Adapter for luminometer cuvettes
- PC interface software
- RS-232- cable
Available options:
- Equipment and field cases
- Adapters for samples from microcentrifuge tubes to 20 mL LSC vials
- automatic injector for e.g flash type luminescence measurements
|
|
The latest in-vivo Imaging system NightOWL II LB 983 from BERTHOLD TECHNOLOGIES is equipped with extreme sensitive CCD cameras (16-bit, cooled to -80C).
A variety of options makes easy adaption to different applications possible. Whole animals and even plants can be imaged as well as blots, gels, microplates, cell culture dishes and arrays.
The sample format can be chosen between 3x3 cm up to 26x26 to get optimum results for every object. The evaluation software enables quantification of bioluminescence and fluorescence pictures, as well in infrared area. Special sample trays allow multimodal imaging, as well with MRI, PET and PET instruments.
|
|
Photonic Sciences range of microchannel plate imaging detectors are complete integrated assemblies comprising one or more microchannel electron multiplier plates and a phosphor screen on an optical window, along with the necessary electrical connections. 18mm, 25mm and 40mm devices are supplied as standard with intermediate and larger sizes available to order.
Devices incorporating a single microchannel plate offer substantial electron gain (up to 10 000). High gain devices featuring two channel plates (chevron configuration) or super high gain devices with three plates (Z configuration) are offered. Resolutions in excess of 30 lp/mm are typical with the single channel plate devices and somewhat less (depending upon size) for multiple plate devices.
|
|
|
|
|
|
Based on the experiences with the NightOWLTM in vivo imager BERTHOLD TECHNOLOGIES has developed the new NightSHADE imaging system with plant research in mind.
For applications such as gene research, circadian rhythms, regulation of plant growth, stress tolerance and drug screening the NightSHADE will offer unique features for plant research.
Features
Top-view emCCD camera with high resolution
LED-based plant illumination with daylight simulation
Second camera for side-view imaging
x-y table and rotating table for 360 viewing
Temperature and humidity control
Camera
NightSHADE is equipped with a highly sensitive 1 Mpixel emCCD camera cooled to an absolute temperature of -20 C. The electron multiplying (em) mode of the camera enhances the signals by amplifying the electrons during readout. This increases the sensitivity with short exposure times and enables single photon detection. The maximum quantum efficiency is reached between 550 and 750 nm making the camera an ideal choice for luciferases and fluorescent dyes.
Specifications
Pixel size 8 x 8 m
Pixel resolution 1002 x 1004 pixel
Cooling -20C (absolute)
Readout speed 13.5 MHz
Lens f0.95, 25mm
Field of view max. 130x130mm
Sample height max. 300mm
Light-tight cabinet with power and I/O ports
|
|
|
The CA-210 LCD Color Analyzer is Konica Minolta's "next generation" color analyzer designed to measure color luminance, gamma characteristic and flicker on various types of Flat Panel Displays including LCD and EL. Faster than previous generation analyzers, the CA-210's measurement of luminance and chromaticity at up to 20 times/second makes it ideal in high production environments. (AND it can simultaneously measure up to five points on the screen. ) The CA-210's special optical design limits acceptance angle to within 2.5 degrees, thus eliminating the influence of the LCD's viewing angle dependency. Matrix calibration allows for high measurement of LCD displays that provide colors through additive mixing of three monochrome colors (R,G,B). A new low luminance capability enables measurements as low as 0.1cd/m2
|
|
The module PW0049 is a stand-alone measuring device which is conceived for the absolute measurement of self-illuminating objects.
Its function is to reproduce the CIE 1931 2 CMF's as precisely as possible. The resulting Tristimulus measuring values X, Y, Z form the basis of most of the common color spaces used today.
|
|
|
|
|
|
Photon etc's state-of-the-art technology allows for a compact Laser Line Tunable Filter that doesn't compromise optical performance without use of filters . Its high pointing stability permits removal of unwanted laser fluorescence without affecting the alignment in different spectral regions.
Due to our Monochromator built-in flexibility, resolution and spectral range, and thus optical performance, it can easily be modified to accomodate customer needs. Photon etc's Monochromator is available in different resolutions.
Since Laser Line Tunable Filters are used in the construction of other Photon etc. instruments, they are mechanically designed, with a microplate alignment system, to be easily upgradeable to Tunable (light) Sources, Spectrophotometers, or Hyperspectral Imagers.
Photon etc. Laser Line Tunable Filters are ideal instruments for both laboratory and field measurement, research, and analysis, for which portable, rugged, and resistant equipment is required. Feel free to request with custom specification.
|
|
Multi crystals optics
Multi crystal optics (2, 3 or 4 reflections) such as a Channel Cut or Bartels monochromator, decreases the ration λ/λ. However this increase in wavelength selectivity is possible only diminished intensity of X-Ray beam.
These monochromators can be either Germanium or Silicon and of varied orientations including (440, 220, 111).
MF2/4Ge Model
The 4 bounce monochromator has been designed with 2 separate but integrated mechanical mounts which contain the channel-cut crystal. A design feature of this mount is that provision has been made to allow the selection of either 4 or 2 reflections as required.
Applications are mainly those of high resolution reflection measurements or line profile studies.
|
|
|
|
|
|
Description: The EP200 Series monochromators are designed to measure a single wavelength of light in the range of 185925nm. When used with Veritys system controllers and the proper optical input path, the EP200 Series provides robust endpoint detection for production or research applications.
The EP200 Series is used extensively in semiconductor and related thin film applications for endpoint detection in etch, CVD etchback, photoresist stripping and related applications. The EP200Mmd is designed for manual adjustment of wavelengths. The EP200Msd permits computer-controlled spectral scanning through the use of a stepper motor, hardened lead screw assembly and position encoders. These elements allow the scanning monochromator to reposition itself for different wavelengths when a process recipe changes or a new product calls for monitoring a new endpoint emission. Performance of the EP200 Series monochromators is enhanced by its wide spectral range, superior wavelength resolution (up to 0.2nm) and extraordinary dynamic range of the photomultiplier tube (PMT).
|
|
|
Our Oriel Cornerstone 260 1/4 m Monochromators are economical, fully automated, multi-grating instruments with dual output ports and exceptional optical performance. We offer a dual grating and a triple grating model; both were designed for fast, automated, continuous scanning over a broad spectral range. Simply program your filter, grating, and port changeover points, and walk away while Cornerstone 260 automatically scans from the UV through the far IR. Other standard features include a built-in electronic shutter, filter wheel control, USB 2.0 or RS-232 and IEEE-488 communications, and a family of interchangeable gratings and slits.
|
|
|
Gentec-EO offers OEM customers the highest flexibility so that you make no compromise. Whether you want a different housing, a specific sensitivity or another output connector, we have a solution for you. We will adjust existing models or design a whole new detector to best meet your needs.
|
|
Gloss Meter Facilities GLOSSMASTER ONLINE 507
Consisting of measuring head and supply and display unit for non-contact gloss measurement on the process line. 10 mm measuring distance. Built-in calibration standard and dust protected versions on request. An electrically controlled traversing device carrying the measuring head can also be supplied.
|
|
Verify the opacity of containers with on-line, high-speed, accurate and reliable measurements. The OPAX-1000 combines proven sensor technology with innovative hardware to provide an easy-to-use system to measure light transmission in a wide variety of applications.
Many products require packaging designed to protect the contents from the damaging effects of light. Establishing pass/fail criteria for minimum opacity of these containers and providing on-line measurement eliminates defects and allows real-time quality control of these processes. The OPAX-1000 provides a reliable solution, allowing you to monitor every container, and identify and remove containers with low opacity.
|
|
|
|
|
|
The BaySpecs CWDM Series Optical Spectrum Analyzer (OSA) is an embedded, integrated monitor that delivers precise measurement and powerful processing capabilities to coarse wavelength division multiplexing (CWDM) applications compliant with the ITU-T G.695 standard.
Coarse Wave Division Multiplexing (CWDM) combines up to 18 wavelengths onto a single fiber. CWDM technology uses ITU standard 20nm spacing between the wavelengths, from 1310nm to 1610nm. High reliability (GR-1209/1221 qualified) is achieved through a rugged mechanical design with no moving parts. Periodic calibration is not required. Input/Output (I/O) is provided through a dual port RAM interface accessed through ADD/DAT bus direct connection or serial (RS232 or USB) communications.
The CWDM OSA Series employs a highly efficient Volume Phase Grating (VPG) as the spectral dispersion element and an ultra sensitive InGaAs array detector as the detection element, thereby providing high-speed parallel processing and continuous spectrum measurements. As an input, the device uses a tapped signal from the main data transmission link through a single mode fiber, then collimating it with a micro lens. The signal is spectrally dispersed with the VPG, and the diffracted field is focused onto an InGaAs array detector. The control electronics read out the processed digital signal to extract required information. Both the raw data and the processed data are available to the host through the supported interfaces.
|
|
The ultimate platform for network experts. Combines physical, optical, transport and datacom testing in a single box. Perform simultaneous acquisitions and fast data post-processing, and benefit from a scalable range of test applications and field-interchangeable modules.
Key Features and Benefits
Five configurations (two-slot, four-slot, seven-slot, eight-slot and bus protector), providing maximum flexibility for long-haul, metro, DWDM, high-fiber-count, Ethernet, SONET/SDH or DSn/PDH test applications
Pentium-powered, with up to 512 MB memory
Easy-to-read, high-resolution 12.1 inch TFT screen
Windows operating system
Simultaneous acquisitions and fast data post-processing
|
|
Built using proprietary manufacturing processes and custom in-house metrology that result in 1-nm thickness precision, these etalons lead the industry with superior free-spectral-range tolerances to as tight as 0.001 GHz. They are supplied to leading OEM customers and researchers worldwide in the telecommunications, aerospace, laser research, and defense industries. With temperature tuning, solid etalons enable precise alignment to the telecommunications ITU grid without active alignment during packaging.
Multi-cavity etalons with flat-top filter functions are also available. They utilize our unique epoxy-free-bonding (CADB) technique for 100% optically transparent optical paths and zero bondline thickness.
|
|
|
Research Electro Optics, Inc. (REO) offers air-spaced etalons that feature industry-leading precision together with proven volume manufacturing and state of the art functional metrology. Our proprietary adhesive-free bonding process ensures that our open frame and hermetically sealed air-spaced etalons will exceed all Telcordia requirements for durability and reliability. Available with any combination of reflectivities, in Fabry-Perot or GT configuration, REO's etalons have many applications including precision wavelength locking, interleaving, and dispersion compensation. Our etalons are manufactured to have a transmission or reflection peak or edge at a specified frequency, with a specified Free Spectral Range, at a specified incident angle. REO's hermetic etalons have guaranteed ultra-low temperature drift.
|
|
The new Model D7 is a high quality optical polarimeter fitted with an integral LED light source and interference filter providing readings over the full circle to better than 0.05angular degrees and 0.1Z.
The instrument is ideal for use in laboratories with a relatively low throughput of samples and especially as a teaching tool in colleges and universities.
|
|
|
|
Optical measurement instruments
