|
|
FemtoPower1060-x-s are passively mode-locked 300 fs fibre lasers operating in the 1060 nm spectral range and delivering up to 5 W of average power.
The lasers consist of a master source, high power fibre amplifier and optical pulse compressor. The lasers are air-cooled, maintenance free and do not require any adjustments.
APPLICATIONS
Fundamental study
Micromachining
Bio-medical
Metrology
|
|
|
|
|
|
These YAG lenses range in focal length from 20 to 150mm. They consist of either two or three air-spaced glass elements mounted in a metal cell. The lenses all have a 30mm clear aperture but they are recommended for use with beams not exceeding one inch in diameter. Two different designs are used - the 20, 30, 40, and 50mm focal length lenses have three elements, but the 60, 80, 100, and 150mm lenses use simpler two element designs. These lenses are Anti-Reflection coated with a high damage Narrowband Multilayer Anti-Reflection coating optimized to give less than 0.5% reflectance per surface at 1064nm.
These lenses are chromatically corrected so that a HeNe guide beam or a visible range video monitor beam will be in focus at the same position as the YAG beam.
Spot size or beam waist is inversely proportional to the numerical aperture at the effective beam diameter. The spot size given in the table is for a full aperture beam. Let us know your imaging requirements and we will be pleased to advise you on the appropriate lens for your application.
Since these lenses are often used with high power lasers we offer optional protective windows which can be attached to the focusing side of the lens. In the event of inadvertent back reflection of high energy beams into the lens it is likely that the window will absorb the incident energy and shatter preventing further damage to the lens itself. Protective windows are offered uncoated in packages of ten pieces. For optimum performance we advise that the protective windows be Anti-Reflection coated with our A46 V Coat at 1064nm.
|
|
|
|
|
|
Precision Photonics offers superior quality mirrors and coatings at a great value. We use only ion-beam-sputtered (IBS) coatings because IBS coatings are significantly more dense, durable, and rugged than conventional e-beam or ion-assisted evaporated coatings. Compared to other coatings, IBS coatings also offer lower scatter and absorption losses and fewer pin-hole defects in the coated surface. This superior film quality and uniformity results in environmentally stable optics with laser damage thresholds of >40 joules at 1064nm.
The SBB super broadband mirrors are ideal for beam-steering applications using both the fundamental laser wavelength and one or more harmonics within the same beam path. Because it is an all-dielectric design, they can handle the high laser powers of both CW and pulsed systems, without limiting the useful angle of incidence or sensitivity to varying states of polarization.
The MPM mirror has been specially designed for multi-photon applications requiring high reflectivity, broad bandwidth, low dispersion and high transmission in the visible spectrum. All our laser mirrors are ion beam sputtered; thus the coatings are dense, easy to clean and insensitive to moisture.
|
|
|
Optida Co. design and produce various configuration laser optical components like High-Reflection Laser Mirrors. Components could be optimized for any coupling and rezonating wavelengths.
|
|
These laser mirrors are designed for specific wavelength laser applications where low wavefront distortion, low scattering, and high reflectivity are usually important. The reflectance is greater than 99.5% at the specified wavelength. Typically the s-polarization is greater than 99.9% and p-polarization is close to 99.5%.
Possible surface damage from higher power laser beams is minimized by careful polishing and precisely controlled coating methods.
As with the broadband mirrors, standard diameters are 1/2 inch, 3/4 inch, 1 inch and 2 inches. Other diameters are available on request. Other laser wavelengths can also be provided so please call.
|
|
Research Electro-Optics, Inc. (REO) produces laser components with the highest performance and greatest reliability worldwide utilizing its superior optical fabrication, superpolishing, and precision thin film coating capabilities. REO manufactures high reflector mirrors, output couplers, beam steering optics, edge filters and Brewster windows which offer the best available performance in terms of scatter, absorption, spectral characteristics, stability, laser damage threshold, and plasma durability.
Features
Superpolished Substrates
Plano and Spherical Optics (1 cm to infinity radius of curvature)
Ultra Low Scatter & Absorption (as little as 1part per million)
Ultra High Laser Damage Thresholds
Ion Beam Sputtered Coatings
Mirrors with Extremely High Reflectivity (up to 99.999%)
Extremely High Ultraviolet and Plasma Durability
High Moisture and Temperature Stabilities
Applications
Lasers (244 nm - 3.39um)
Inter Cavity Optics
Frequency Reference Cavities
Optical Instrumentation
|
|
MDG mirror series was designed to meet any protection need when it is necessary to realize a perimetrical protection.
It is possible to use them with every SB4/SB2 safety barrier. Thanks to the easy installation and excellent performances, this product is extremely versatile and suites the varied applications. This mirror series was born to meet any protection need it is necessary to realize a perimetrical protection.
|
|
|
The Universal Mirror Mount/Platform 840-0052 is suited for precise adjustment of standard mirrors which can be directly bound to it. The mount may be used in horizontal position as a tilt table. Then it can be used to align opto-mechanics around two axes. For such mounting the mount has an M4 hole on its back
|
|
CAD-PRO 3D are optimized for laser template projection on curved surfaces.
Working with complex surfaces requires 3D display calculation. CAD-PRO 3D laser projectors are equipped with special hardware, high-speed firmware and 3D software to meet this challenge.
For large area projection, several projectors may be combined. They serve bordering projection areas with flexible overlap. Load balancing distributes the projection according to area and reach of the joined projectors.
Maintenance or defect is no reason for production downtimes: LAP CAD-PRO are small, light-weight and only connected by one cable. Your personnel may change a projector within minutes, helped by the one-screw tilt bracket and scaffolds with lowering mechanism.
|
|
CAD-PRO 2D laser projectors are optimized for projection on flat surfaces.
LAP laser projectors can be equipped with either one or two laser sources. You may select red, green or multicolor (red, green and yellow) projection.
CAD-PRO 2D display templates or outlines from CAD data. Display to correct scale is given by calibration, using targets at previously measured positions.
Large area projection is done with several projectors positioned side by side. Load balancing is included in PRO-SOFT display software.
Step by step workflow may be supported by using structured data files.
|
|
General description
- Laser in red or green. (Choice of colour for an optimal visibility depending on the colour of the projection surface and / or the material.)
- Saving of time and material through an optimised operating process
- Quality control
- Increase in productivity
- Projection of continually changing figures of any shape with a high projection exactness and quality
- Precision high speed scanner
- Mounting flange with a variable orientation to all 3 directional axes
- Temperature stabilised (Peltier cooling) diode laser
- Modulating laser sources, i.e. no disturbing connecting lines are visible
- Positioning devices or tape measures are not needed any longer. Efficiency and quality are optimised.
- Online rotation and adjustment of the projection.
- Full size display of CAD data and other formats!
- Easy operating with extensive software
- CE-conformity-labelling
- Laser class 2M
|
|
|
All-Digital Scan Head Components. Advancing the State-of-the-Art of Galvo-Based Laser Steering Systems, Cambridge Technology has a full complement of All-Digital Scan Head Components allowing you to simplify your system integration while cost-effectively providing your customers with the fastest, highest performing, highest marking speed, intelligent laser scanning capabilities worldwide. Self-tuning digital servos with real-time status back-channels, ethernet-based marking system controllers, USB-based all-in-one controller/servos are all available to complement the wide selection of high-speed, high-stability galvanometers and lens-ready open-frame mounting blocks.
|
|
Custom IBS Coatings for Laser Windows, Mirrors and Beamsplitters
Easy to clean and chemically resistant
Dense, non-porous structure is insensitive to moisture
Low scatter and absorption losses result in high-damage thresholds
Repeatable, highly controlled process for precise layer control
In addition to a variety of off-the-shelf laser optics, PPC offers custom high-energy coating design and manufacturing from 266 nm to 2200 nm. At PPC, we use ion-beam sputtering (IBS) technology because IBS is a repeatable and controllable process that results in dense, durable, high-damage-threshold thin films that are resistant to changes in heat and humidity, even in a vacuum environment. Coatings can be done on customer supplied materials or we can provide you with complete finished optics in as little as 48 hours!
Coating Types
• High reflectors to >99.995%
• Anti-reflection (ARs) to 98%
• Low dispersion mirrors
• Broadband dielectric mirrors
|
|
Research Electro-Optics, Inc. (REO) produces laser components with the highest performance and greatest reliability worldwide utilizing its superior optical fabrication, superpolishing, and precision thin film coating capabilities. REO manufactures high reflector mirrors, output couplers, beam steering optics, edge filters and Brewster windows which offer the best available performance in terms of scatter, absorption, spectral characteristics, stability, laser damage threshold, and plasma durability.
Features
Superpolished Substrates
Plano and Spherical Optics (1 cm to infinity radius of curvature)
Ultra Low Scatter & Absorption (as little as 1part per million)
Ultra High Laser Damage Thresholds
Ion Beam Sputtered Coatings
Mirrors with Extremely High Reflectivity (up to 99.999%)
Extremely High Ultraviolet and Plasma Durability
High Moisture and Temperature Stabilities
Applications
Lasers (244 nm %u2013 3.39um)
Inter Cavity Optics
Frequency Reference Cavities
Optical Instrumentation
|
|
|
|
|
|
ECO-1 stand is the ideal support for all types of barriers of the SB series and for MDG0001 mirrors. It is practical and economical and is anchored to the floor by means of two 10 mm diameter metal anchors (not included). The base is composed of a 15 mm thick burnished iron plate, with holes for the anchors. Each post comes with 4 sliding inserts already positioned in the side splines of the burnished element. The brackets supplied with the fences or mirrors shall be fixed to such inserts. If one of the other splines is to be used (the extruded element comes with one spline per side), simply remove the plastic cover from the post, recover the inserts and insert them where desired.
If the application is particularly demanding from the viewpoint of mechanical stress, an 'L' reinforcement bracket (code: ECO-L) can be fixed between the post and the base. Normal application do not require the reinforcement bracket since the aluminium extruded structure is anchored to the iron base by means of a large screw, which goes approximately 100 mm inside the extruded element and the head of which is hosted inside the base plate.
|
|
|
Beam combiners are partial reflectors that combine two or more wavelengths of light -- one in transmission and one in reflection -- onto a single beam path. Commonly ZnSe, ZnS, or Ge, beam combiners are optimally coated to transmit infrared light and reflect visible light, as in combining infrared CO2 high-power laser beams and HeNe visible diode laser alignment beams.
|
|
|
Photop Optics' micro-optics line serves optical communications. This includes micro lenses for collimating and laser coupling, micro prisms for managing light path and direction, crystal parts for light splitting and combination, waveplate and true-zero waveplate, and optical assembly, such as PBS, Etalon. Our micro-optics products are widely used in telecom compoents, such as 3-port component, optical switch, circulator, PBC (polarization beam combiner).
|
|
Adjustable Polarizer Holders
Dimensions most compact among 1" optics mounts
Both tilt and tip are controlled from aside the optical path
Ideal for dense optical schemes
Fine adjustment screws with 0.25mm pitch
Hardened inserts under adjusters
Original stabilized L-shaped flat spring
Accepts optics upto 10.5 mm thick
Tilt/tip travel range ±2.5°
Roller bearings
Lockable. Continuous 360° rotation
Horizontal and Vertical mounting
Mounting holes M4 on three sides
|
|
Applications:
- Spectroscopy
- Sensors
- IR communications
- Surgery
Features:
- Robust fiber laser pump source
- Interchangeable wavelength modules
- Up to 800cm-1 tuning per module
|
|
|
EKSPLA offers three different solutions for precise crystal heating. TK series of crystal ovens provide reliable, stable performance and can accommodate wide range of crystals.
|
|
|
Pockels cells of PCB series are transverse field devices. Low electro-optical coefficient of BBO results in high operating voltages. The quarter-wave voltage is proportional to the ratio of electrode spacing and crystal length. As a result, smaller aperture devices have lower quarter-wave, however even for 2.5 mm aperture devices the quarter-wave voltage is as high as 4 kV @ 1064 nm. Double crystal design is employed to reduce required voltages and to allow operation in half-wave mode with fast switching times.
|
|
|
EKSPLA manufactures high efficiency pump chambers for pumping of various active elements (Er:YAG, Er: YLF, Nd:Glass, Nd:KGW, Nd:YAG, Nd:YLF, Nd:YVO , Yb:YAG, etc.
|
|
PS5021 flashlamp driver is designed for pumping of variable or long pulse width solid-state lasers. It features variable pumping pulse in 0.1-2 ms range and output voltage of up to 450 V. This power supply can be remotely controlled through RS232 interface.
FEATURES Excellent pulse-to-pulse stability. The charger is based on resonant inverter topology which is most efficient way to charge capacitive loads. Innovative design of charger circuit allows to charge capacitor bank with an excellent precision of 0.1%.
|
|
The OP750 multichannel source can be configured for a mix of up to 24 individual or switched LED or laser sources.
A single wavelength LED sources feature and internal large core fiber to guarantee an overfill condition into 62.5/125 or 50/125 multimode fiber available for the wavelength 850nm and 1300nm.
The single wavelength sources for 1310nm and 1550nm are terminated with standard 9/125 fiber. A dual wavelength option, 1310nm and 1550nm into a single port is available as well (12 channel version only).
|
|
|
The PDL 800-B is a stand-alone driver for the picosecond diode laser heads of the LDH-Series (375 to 1550 nm) as well as for the sub-nanosecond pulsed LEDs of PLS-Series (260 to 600 nm). These laser heads can emit light pulses as short as 70 ps FWHM (50 ps on selection) at repetition rates from single shot up to 40 MHz with peak powers up to 1 Watt. The PDL 800-B features easy-to-use controls for pulse width, repetition frequency and laser power level.
|
|
| ... products without technical information |
| |
|
|
Other Laser components
