|
|
1/3" HIgh Resolution, Day&Night
Built-in 3X Varifocal Lens Camera
- 1/3" Sony Super HAD color CCD
- Built-in 3X (3~9mm) varifocal lens with
auto iris
- Ultra High Resolution of 530TV lines
- 24/7 surveillance with Day&Night
capability
- Removed noise, ghosting effect with
SSNR
- 0.3 Lux (color) / 0.002 Lux (Sens-up
mode)
- White Balance : ATW / AWC / Manual
selectable
(Color Temperature 1800K~10,500K)
- OSD (On Screen Display)/ Privacy
Masking Motion Detection
- S/N ratio of 50dB
- Dual Voltage : AC 24V & DC 12V (N/P) |
|
pixelfly qe
This high performance digital 12bit CCD camera system features state of the art in CCD and electronics technology. The pixelfly qe has an extraordinary quantum efficiency with up to 65%. The system consists of an ultra compact camera head, which either connects to a standard PCI or a compact PCI board via a high speed serial data link. The available exposure times range from 5µs to 65s. A digital temperature compensation is integrated instead of a space consuming thermo-electrical cooling unit. All camera functions can be remotely accessed and controlled via digital interface. This compact digital CCD camera system is perfectly suited for many scientific and industrial imaging applications, like microscopy, spectroscopy and quality control. |
|
| Measuring 44x44x56mm, these compact cameras offer the same performance as our enhanced USB 2.0 camera line, delivering outstanding image quality and value. Features include new locking industrial mini USB and RJ45 GPI/O connector, multiple mounting points, 60 fps at full 640x480 resolution, 100+ fps at 320x240 binning mode, and on-board processing and sensitivity provide outstanding image quality. Both color and monochrome product models are fully supported by the Lumenera Software Developer’s Kit with an application programming interface compatible with C++ and Visual Basic. |
|
pco.1200 s
This high speed 10bit CMOS camera system comprises advanced CMOS and electronics technology. With the new approach to integrate the image memory (camRAM) into the camera itself, it enables unmatched fast image recording with 820MB/s. The system features an excellent resolution (1280 x 1024pixel) and low noise. It consists of a compact camera with an external intelligent power supply. The image data are transferred via customer selectable standard data interfaces to a computer (IEEE 1394 (“firewire”), camera link). The available exposure times range from 1µs to 5s. This digital CMOS camera system is perfectly suited for high speed camera applications such as material testing, external crash testing or super slow motion movie clips.
|
|
Back in 1992, Kappa was one of the first camera manufacturers to offer cooled cameras and today it maintains this tradition with its latest generation of Peltier-cooled sensors. The major difference between back then and today is that nowadays thermo-electrical systems have replaced coolants as a means of generating the desired differences in temperature.
The cooling element allows for sensor temperatures of -10 °C at ambient temperatures of up to +30°C, thus enabling exposure times of several minutes while maintaining good dynamic performance. In fluorescent microscopy applications this helps to visualize structures which would be almost invisible even to the well-adapted eye.
In addition to thermal noise, readout noise and electronic noise also have a negative impact on signal quality. To help reduce readout noise Kappa cameras can be read out with a reduced clock rate. Electronic noise is kept at bay by using high-quality components and employing sophisticated circuitry. However, as a general rule, in order to reduce the negative influence of noise it is advisable to keep electronic enhancement at a minimum. Kappa cooled cameras are also available as signature versions. |
|
pco.2000
This high resolution 14bit CCD cooled camera system comprises advanced CCD and electronics technology. With the new approach to integrate the image memory (camRAM) into the camera itself, it enables unmatched fast image recording with 160MB/s. The system features thermo-electrical cooling (delta vs. ambient -50°C), a superior high resolution (2048 x 2048pixel) and low noise (down to 10e- rms). It consists of a compact camera with an external intelligent power supply. The image data are transferred via customer selectable standard data interfaces to a computer (IEEE 1394 (“firewire”), camera link). The available exposure times range from 5µs to 49days (500ns opt.).This digital CCD camera system is perfectly suited for low light camera and piv camera applications. |
|
Alta U Series
So many improvements in such a small package: No more external controllers, plug-in cards, or frame grabbers. Dual digitization for high precision plus high speed focus. On-board camera memory for fast local sequences and no worries about transfer interruptions. Time delayed integration for imaging far beyond the size of the sensor. A single 12V power input for optional battery-powered operation. |
|
Carl Zeiss offers a whole camera family in monochrome and color:
The AxioCam HR has a resolution bordering the optical limits with up to 12 Megapixel via Microscanning for your routine and research tasks.
The MR allround-camera is a very economical solution with an adequate resolution for all applications in material analysis.
The AxioCam MRc5 color camera with 5 Megapixel resolution and FireWire-data interface offers quickly generated, high resolution and absolutely color fast images at an excellent price-performance ratio. |
|
ProgRes® Microscope camera
ProgRes® microscope camera family offers suitable models for all contrast methods in light microscopy. A ProgRes® microscope camera can easily be integrated into each laboratory via C-Mount and Firewire interfaces.
Exact reproduction of colors and finest details in a digital image are basis for demanding analysis and reliable documentation.
In routine, research or fluorescence: the ProgRes® microscope camera family offers the right camera for each application in light microscopy. |
|
pco.1300 oem
This versatile high performance 12 bit CCD camera system is specifically designed for OEM applications. The pco.1300 oem has an extraordinary quantum efficiency of up to 65 %. At the heart of the camera is an FPGA processor allowing for sophisticated control and accurate timing of the CCD and associated electronics. In addition, a proprietary offset control algorithm has been developed which provides very high offset stability, regardless of ambient temperature or signal changes ensuring accurate and repeatable quantitative data over long periods of time. The pco.1300 oem’s most unique feature is its flexibility for customization to fit any OEM user application. ROI, binning, cooling, as well as other features of the camera can be selected and optimized to accommodate the user's application. Camera features excellent resolution (1392 x 1040 pixel), 12 bit dynamic range, exposure time 5 µs to 1 hour, internal frame buffer for continuous image capture (64 MB min), excellent low noise of 8 eŻ rms @ 10 MHz, selectable regulated cooling to -30 şC vs. ambient, standard interface IEEE1394a, optimal offset stability and control (< 1 count). This low light camera system is perfectly suited for many sensitive and low noise imaging applications, such as biochip reading, fluorescence imaging, confocal & light microscopy etc.. |
|
sensicam em
The new generation of electron multiplication (emCCD) CCD sensors is integrated into the proven sensicam camera system. With this on-chip multiplication of the light signal the readout noise of the camera can be neglected ( 50). With its excellent resolution of 1004x1002pixel this high performance cooled digital 12 bit CCD camera system is best suited for extremely low light camera applications. The system features thermo-electrical cooling of the image sensor (delta of -45°C vs. ambient temperature) and an outstanding quantum efficiency (up to 65%) achieving a high spectral sensitivity in general and especially in the NIR. Exposure time modes (software selectable) range from 75 µs - 1h. A high speed serial data link connects the system to the PC (fiber optic link available). This low light emCCD camera system is perfectly suited for scientific imaging (e.g. microscopy, bio marker and label imaging) and for night vision applications. |
|
Lumenera offers a wide range of cameras based on high performance sensors, providing a variety of unique capabilities to satisfy your imaging applications.
|
|
OEM Solutions
When it comes to integrating vision or optical measurement capabilities into one's original equipment, picking separate components on the sole consideration of their state-of-the-art specifications doesn't make it right every time. When it makes it. What is of utmost importance, rather, is the supplier's skills in sorting out the very requirements that govern the final system performance and customizing the right solution for the right cost.
We specializes in supplying industry OEMs with specific solutions that exactly meet their exact vision or optical application requirements.
Here is one example of customization and application-specific solution
a compact, high sensitivity linescan camera used in sorting applications. |
|
| Thanks to its 400 MHz (3,200 MIPS) DSP, the VCLine scan Smart Camera from Vision Components is one of the fastest intelligent cameras on the market. The device supports three integration modes: the free-running mode enables a scan rate of 11 kHz. With a constant integration time, the camera can be triggered externally at a maximum scan rate of 5,5 kHz. A third mode allows for a variable integration time which is determined by external triggering, reaching a maximum scan rate of 11 kHz. The Smart Camera comes equipped with 32 MB DRAM and 4 MB Flash EPROM for program and data storage. It features both an Ethernet and a RS232 interface as well as four digital PLC inputs and four outputs, an image trigger input and a flash trigger output. Due to its small dimensions (90 x 50 x 35 mm), the VCLine can be easily integrated into machines and plants. Like all other Smart Cameras from Vision Components, it is especially suited for use in rugged industrial environments – due to its compact and robust housing, it withstands vibrations and shocks. |
|
| The FastCamera40 is a high-speed megapixel digital camera system, based on a CMOS imager with an global electronic shutter. This camera has a high-speed, scaleable, integrated FPGA and memory subsystem which enable stand-alone high speed in-camera image processing. When integrated with a camera link framegrabber/coprocessor board, the resulting system capabilities can be expanded by adding processors and memory on the board according to the needs of the user. Another option is the USB2.0 version which allows the full rate capture of events in the camera for eventual downloading. |
|
| The FastCamera13 is a high-speed megapixel digital camera system, based on a CMOS imager with an global electronic shutter. This camera has a high-speed, scaleable, integrated FPGA and memory subsystem which enable stand-alone high speed in-camera image processing. When integrated with a camera link framegrabber/coprocessor board, the resulting system capabilities can be expanded by adding processors and memory on the board according to the needs of the user. Another option is the USB2.0 version which allows the full rate capture of events in the camera for eventual downloading. |
|
Ultraviolet (UV) option
An increasing number of applications make use of UV light. This makes surface artifacts appear in greater clarity and allows visualization of even smaller features.
The DVL Series cameras are offered with a UV-sensitive option for resolutions of 512, 1024 and 2048 pixels. These cameras incorporate a high-sensitivity imager with fused silica windows for use in the UV down to 200nm. |
|
sensicam uv
This UV sensitive cooled digital 12bit camera system comprises advanced CCD and elctronics technology. With this on-chip multiplication of the light signal the readout noise of the camera can be neglected ( 50). With its excellent resolution of 1004x1002pixel this high performance cooled digital 12 bit CCD camera system is best suited for extremely low light camera applications. The system features thermo-electrical cooling of the image sensor down to -12°C and an outstanding quantum efficiency in the UV range of the spectrum (QE 15% @254nm and 10% @193nm). Exposure time modes (software selectable) range from 75 µs - 1h. A high speed serial data link connects the system to the PC (fiber optic link available). This low light UV camera system is perfectly suited for scientific imaging (e.g. metrology, semiconductor quality control, nano particle measurements and bio label imaging) applications. |
|
The Tocsin 102C Series CCTV Cameras provide big performance in a compact easy to install and operate package. The 102C series is ideally suited to application such as room occupancy, area/door entry and fixed equipment or area monitoring. This is particularly true where size is an issue and conventional pan-tilt-zoom units cannot be fitted. The cameras are available with a wide range of lens options and can be adjusted for different focal points and depth of view. Fully immersible versions are available to a depth of 20M.
To compliment the 102C a range of accessories is available for video capture, display and transmission. LED light modules are also available as well as glare shields, mounting brackets and junction boxes.
Features:
18-32 VDC Supply
Both PAL and NTSC Versions Available
Available for use with standard Co-Ax or twisted pair cable
Sapphire windowed for superior optical transmission and damage resistance.
All 316 stainless steel housing
Wide temperature range from -20 to +65 Degrees Centigrade
|
|
| The compact Quadtek R890 CCTV camera is designed for harsh environments. The marine grade alloy enclosure is suitable for applications where explosion proof, corrosion resistance, lightweight, and strength are required. The video output is either standard composite or balanced twisted pair, enabling video transmission at distances of up to one kilometer. Imaging |
|
Kappa DX – Digital Cameras with FireWire Interface
Kappa DX camera systems are complete systems ready for installation. The camera series is based on variable camera electronics, low power consumption, advanced circuitry, and an extremely rugged design with an excellent signal quality at the same time. The user can choose between color or black-and-white systems, high-quality CCD sensors by Sony and Kodak with megapixel resolution and various interfaces (FireWire/IIDC compatible, CameraLink, GigE).
The digital cameras with FireWire interface comply with the highest standards and offer outstanding Kappa-specific technological highlights, as for example: rugged construction, excellent highly linear signal quality, extraordinary signal-to-noise ratio, camera-internal real-time color signal processing, long-time exposure and optional a second serial interface, camera-internal signature function with crypto-chip, image memory, etc. |
|
| Kappa has successfully extended its camera range with Gigabit Ethernet cameras. The GigE CCD cameras allow cable lengths of up to 100m/330ft (CAT5E) and are available with various sensors; in color, monochrome or cooled versions, with megapixel resolution, frame rates of up to 30/90 Fps and „short trigger delay“ (6,75 micro sec.). The Kappa Software Pool offers three different tools: The camera control software KCC, the software development kit (sdk3) for integration into third-party software interfaces, and the application software KIB for standard measurement tasks. Special Kappa features like the camera-internal color processing and the camera-internal signature creation are also available for the GigE camera model range. The new Kappa Catalog 2008 provides more detailed information about the 40 GigE Cameras and their prices. |
|
pco.4000
This high resolution 14bit cooled CCD camera system comprises advanced CCD and electronics technology. With the new approach to integrate the image memory (camRAM) into the camera itself, it enables unmatched fast image recording with 128MB/s. The system features thermo-electrical cooling (delta vs. ambient -45°C), a superior high resolution (4008 x 2672pixel) and low noise (down to 12e- rms). It consists of a compact camera with an external intelligent power supply. The image data are transferred via customer selectable standard data interfaces to a computer (IEEE 1394 (“firewire”), camera link). The available exposure times range from 5µs to 49days. This cooled digital CCD camera system is perfectly suited for low light and high resolution camera applications, like microscopy, aerial photography or quality control.
|
|
pco.1600
This high dynamic 14bit cooled CCD camera system comprises advanced CCD and electronics technology. With the new approach to integrate the image memory (camRAM) into the camera itself, it enables unmatched fast image recording with 160MB/s. The system features thermo-electrical cooling (delta vs. ambient -50°C), a superior high resolution (1600 x 1200pixel) and low noise (down to 12e- rms). It consists of a compact camera with an external intelligent power supply. The image data are transferred via customer selectable standard data interfaces to a computer (IEEE 1394 (“firewire”), camera link). The available exposure times range from 5µs to 49days (500ns opt.). This digital CCD camera system is perfectly suited for low light camera applications like fluorescence imaging and microscopy.
|
|
The Alta U16M uses a very large format 16-megapixel full frame sensor with microlensing and anti-blooming gates, ideal for applications requiring large field of view, such as sky surveys and radiology.
4096 x 4096 array, 9 x 9 micron pixels
5 MHz 12-bit and 1 MHz 16-bit digitization
32 Mbyte camera memory
USB 2.0 interface: no plug in cards or external controllers
Programmable, intelligent cooling to 40ş C below ambient
Binning up to 8 Horizontal x 4095 Vertical
Subarray readout and fast sequencing modes
Precision time delayed integration readout
Programmable fan speed for low / zero vibration
Two serial port outputs for control of peripheral devices
General purpose programmable I/O port
External triggering and strobe controls
ActiveX drivers included with every system (other software sold separately)
Field upgradeable firmware
Self-test capability with data simulators
Fused silica windows
Runs from single 12V supply with input voltage monitor
Compact enclosure
Programmable status indicators |
|
pco.1300 solar
This versatile high performance 12 bit CCD camera system is specifically designed for electro luminescence (EL) applications in the range of 850nm - 1200nm. The pco.1300 oem has an extraordinary quantum efficiency of up to 11 % @ 900nm. At the heart of the camera is an FPGA processor allowing for sophisticated control and accurate timing of the CCD and associated electronics. In addition, a proprietary offset control algorithm has been developed which provides very high offset stability, regardless of ambient temperature or signal changes ensuring accurate and repeatable quantitative data over long periods of time. The pco.1300 solar’s most unique feature is its increased sensitivity in the NIR range of the spectrum. ROI, binning, cooling, as well as other features of the camera can be selected and optimized to accommodate the user's application. Camera features excellent resolution (1392 x 1040 pixel), 12 bit dynamic range, exposure time 5 µs to 1 hour, internal frame buffer for continuous image capture (64 MB min), excellent low noise of 7 eŻ rms @ 10 MHz, selectable regulated cooling to 5 şC, standard interface IEEE1394a, optimal offset stability and control (< 1 count). This low light camera system is perfectly suited for many sensitive and low noise imaging applications, such as solar cell quality control, NIR fluorescence imaging, EL applications etc.. |
|
Apogee Instruments Inc has been in development of a low cost, high performance follow on to the successful Alta line. This camera fills the current void of lower cost cameras with higher speed and smaller footprints.
Apogee Instruments offers a broad range of professional imaging solutions. Over the years we have built an impressive list of satisfied customers. We are confident that you will find a solution to fit your needs at a cost that won't break your budget.
Contact our Sales Department with any questions you may have about our products or would like to pre-order an Ascent system. |
|
Ranger - The fastest camera in the world for three dimensional shape measurement!
The Ranger camera measures 3D features at unmatched speed producing a complete data set of the object measured. Providing a 3rd dimension adds height and shape measurement data, which can be critical when correctly classifying an object. Ranger is the key component in many market leading in-line inspection machines used in the Electronic, Semicon, Wood, Robot Vision, Plastic, Rubber and Food industries.
The Ranger acquires up to 35,000 profiles per second, each containing up to 1536 high quality 3D coordinates. This is more than 45 million 3D points per second!
The complete 3D calculation is done inside the camera and the ready-to-use 3D coordinates are sent directly to a standard PC via CameraLink or Gigabit Ethernet. This eliminates the need for expensive post processors.
|
|
|
|
Industrial video cameras
