|
|
* Especially high isolation
* Wide tuning range
* Two coupled isolator stages with two industrial crystals
* Choose between two wavelength ranges
* No beam displacement
* Input polarization = output polarization
* TGG crystal (high Verdet constant)
* Rare earth magnet (high remanence)
* Easily integrated into existing equipment
* Antireflection coatings on all optical surfaces
* Individually calibrated adjustment curve supplied with each isolator |
|
Flip Mirror Holder KSH 90
The swing leaf bears a wobble plate with an adjustment range of ± 0.5° and an aperture of 2". Optics with a thickness > 12 mm (normally 2" mirrors) are fixed with a plastic bolt.
Optical components (such as mirrors and beam splitting paltes) having a thickness of only 10 mm can be pressed aganst three stops with the enclosed two clamping professional shoes and thus fixed.
The swing angle is 45°, the repeatability < 100 µrad. The swing time of the motorized version is about 1 s.
- for use with SYS 90
- black anodized aluminium alloy
- mountable onto pin or industrial slide
- manual operation or motorized
|
|
Features of the 6200 Closed Loop Galvanometer Family
Highest Galvo Speeds and Step Response Times: The 6200H series' positioning speed comes from advanced galvanometer and new actuator manufacturer design for the highest system resonant frequency and RMS power capability. The newest design of the actuator features extremely high torque along with very little electrical inductance, thus providing high professional scanner speeds at reduced manufacturers of power supply voltages. These characteristics combine to produce superior system bandwidths, the fastest step response times and the highest repetition rates with excellent wobble and jitter performance.
Maintaining Position Accuracy and Repeatability at High Speeds: CTI's newest innovation in position accuracy is the advanced optical position detector, which was designed to provide high positioning repeatability, linearity and stability over time and temperature while operating at high speeds.
High System Performance and Reliability Over Time: Superior product lifetime and reliability result from disciplined design technique, the best in bearing supplier technology and quality manufacturing processes and workmanship. Our scanner designs are computer modeled and have been life-test proven to billions of cycles of operation. CTI's high standards of manufacturing quality guarantees the performance consistency that you need to design the high quality systems demanded in today's competitive marketplace.
|
|
Nutfield Technology's QuantumScan-30 (QS-30) galvanometer industrial scanners are used to position industrial laser beams fast and accurately over millions of cycles. The limited rotation moving magnet motor is coupled to a highly sensitive position detector. The device is controlled through a PID based servo driver to provide amazingly fast and accurate closed loop professional control.
NTI's engineers are veterans of the scanning industry and have been designing galvos for two decades. They have been continuously researching ways to improve scanner performance, which has lead to several patents and patent pending designs including our exclusive professional ceramic rotor designs. This first of a kind rotor has exceptionally low inertia and high stiffness, which results in higher bandwidth performance. The QS-30 uses high quality bearings supplier with tested and patent pending bearing preload designs to ensure a long lifetime of operation.
The QS-30 Position Detector was designed close to the mirror for the best possible accuracy. Further position detector refinements give the QS-30 galvanometer up to 10 times greater signal-to-noise; the highest in the industry. This means greater pointing accuracy and repeatability in your application. |
|
The professional laser beam expander system bm.x is the worldwide only available modular beam expander system. The sophisticated design allows you to change the expansion ratio by exchanging a module - without any re-calibration.
Of course, the beam expander bm.x family offer the LINOS precision.
Due to the ARBS coating the bm.x can be used with Nd:Yag laser as well as HeNe in the visible wavelength range.
* Worldwide unique modular design
* High performance optical and coating design
* For laser beam expanding (exit aperture 30 mm)
* Entrance lens fabricated from fused silica
* To reduce laser beam divergence |
|
* Different versions: Universal modulator, Intensity modulator (P) with thin film polarizer, Phase modulator (PHAS)
* With 4 industrial crystals in order of compensation
* Manufacturer of connectors: 4 mm banana jacks
* Different versions for wavelength ranges between 250 to 1100 nm
* Other specifications or modifications on request |
|
Flat-Top2:
StockerYale's Flat-Top˛ Professional generator is a laser beam shaping module that converts a Gaussian beam into a focused, collimated, or diverging flat-top profile. This innovative product can maintain a high degree of uniformity, power, and intensity over large distances.
The Flat-Top˛ Generator is compatible with industrial lasers that emit at UV, visible and near-IR wavelengths. The module can be easily integrated with our world-renowned Lasiris™ lasers, as well as other laser types, both standard and fiber-coupled. |
|
RAYLASE developed its patented PCD technology to resolve the issues of power instabilities with Carbon dioxide lasers, which is a limiting factor for certain applications. External optical control and stabilisation of CO2 laser power using the patented PCD method enables precision laser processing of stationary or moving materials such as paper, cardboard, plastic professional films and other forms with CO2 industrial lasers.
|
|
The SurfBoard-USB is a fully featured board, which provides reliable performance for controlling and synchronizing I/O, 2 and 3-axis scan heads and virtually any industrial laser. The board can operate from any PC professional platform with a USB port - including laptops and embedded Professional pcs. Gone are the days of opening a bulky desktop to install a board or worrying about address or IRQ conflicts. The SurfBoard-USB is a truly plug-and-play product.
Measuring only 10x10cm, the SurfBoard-USB operates with Windows XP / Vista on NTI's industry leading WaveRunner laser / professional scanner professional control software. Your laser scanning system will not be waiting for data with the incredibly fast USB 1.1 or 2.0 PC professional interface and the 10 micro second laser / scanner update rate. The board includes on-board professional flash memory to store large jobs, plus 6 inputs and 6 outputs used for automation and a pointer professional control, mark-in-progress signal, start mark signal, and mark-on-the-fly professional encoder inputs. Scan head control is through an industry standard XY2-100, 16-bit digital interface or an optional analog interface. Laser control is provided via standard PWM, analog or 8-bit digital signals.
Each board is packaged in a small, rugged enclosure, which can be remotely mounted to facilitate easy system installation. And don't worry about losing your professional software dongle, because with the SurfBoard-USB, there is no software dongle required. |
|
| The UC-2000 Universal Professional laser Controller provides an easy user interface for total control of laser power, duty cycle, and modulation frequency. Power control is achieved by pulse width modulation (PWM) at selectable clock frequencies of 5, 10, and 20 kHz. Compatible with Synrad's entire line of Co2 lasers, the all-digital UC-2000 features an easy-to-read LCD screen and easy set-up. Available in standard or rack-mountable packages. |
|
| The Compact Laser diode controller (cLDD) is an all–in–one unit that combines a laser diode manufacturer ⁄ SLED mount, a low noise current driver and a TEC controller in a self–contained enclosure of exceptional design and engineering. Initial configuration and alarm settings are made using the included installation wizard and professional control software application, through any PC connected to the cLDD via a USB port. After initialization, the unit may be operated either connected to the computer and controlled by the provided user–friendly control software application, or stand–alone, disconnected from the computer and operated from the built–in keypad and display. The equipment incorporates hardware professional laser protection features like slow current ramp–up, current limit and temperature limit. External modulation capability is included. The Compact Laser Diode Driver can include a 14 pin Butterfly mount (standard, including routing boards for Type I, Type II and custom pinout devices) or a DIL mount. The mounts are interchangeable by the user and can be purchased separately. |
|
-High stability, low noise output
-Dual output ranges on most models
-Constant current and constant power operating modes
-Multiple industrial laser protection features
-Up to 15V compliance available with 4-Wire voltage measurement on select models
-Pulsed and CW modes
|
|
| The OP250 is a configurable stabilized light source with a variety of Professional lasers and LEDs. Available in a single port or dual port configuration, selectable wavelengths, and various power levels and industry standard optical interfaces this instrument offers all the features and functions necessary for the development, testing and inspecting of optical components and cables. |
|
FemtoPower1060-x-s are passively mode-locked 300 fs fibre professional lasers operating in the 1060 nm spectral range and delivering up to 5 W of average power.
The lasers consist of a master source, high power fibre professional amplifier and optical pulse manufacturer of compressor. The lasers are air-cooled, maintenance free and do not require any adjustments.
APPLICATIONS
Fundamental study
Micromachining
Bio-medical
Suppliers of metrology |
|
* Front surface circular mirrors
* Metal mirrors are fabricated from low expansion material1)
* Highest reflectance for 450 nm to 12 µm wavelength
* Equal reflectance without absorption band
* Angle of incidence from 0° to 45°
* Resistant against environmental influences
* Double dielectric protection layer
* Suitable for short-pulse applications |
|
Precision Photonics offers superior quality mirrors and coatings at a great value. We use only ion-beam-sputtered (IBS) coatings because IBS coatings are significantly more dense, durable, and rugged than conventional e-beam or ion-assisted evaporated coatings. Compared to other coatings, IBS coatings also offer lower scatter and absorption losses and fewer pin-hole defects in the coated surface. This superior film quality and uniformity results in environmentally stable optics with professional laser damage thresholds of >40 joules at 1064nm.
The SBB super broadband mirrors are ideal for beam-steering applications using both the fundamental laser wavelength and one or more harmonics within the same beam path. Because it is an all-dielectric design, they can handle the high laser powers of both CW and pulsed systems, without limiting the useful angle of incidence or sensitivity to varying states of polarization.
The MPM mirror has been specially designed for multi-photon applications requiring high reflectivity, broad bandwidth, low dispersion and high transmission in the visible spectrum. All our laser mirrors are ion beam sputtered; thus the coatings are dense, easy to clean and insensitive to moisture. |
|
Research Electro-Optics, Inc. (REO) produces laser components with the highest performance and greatest reliability worldwide utilizing its superior optical fabrication, superpolishing, and precision thin film coating capabilities. REO manufactures high reflector mirrors, output couplers, beam steering optics, edge industrial filters and Brewster windows which offer the best available performance in terms of scatter, absorption, spectral characteristics, stability, laser damage threshold, and plasma durability.
Features
Superpolished Substrates
Plano and Spherical Optics (1 cm to infinity radius of curvature)
Ultra Low Scatter & Absorption (as little as 1part per million)
Ultra High Laser Damage Thresholds
Ion Beam Sputtered Coatings
Mirrors with Extremely High Reflectivity (up to 99.999%)
Extremely High Ultraviolet and Plasma Durability
High Moisture and Temperature Stabilities
Applications
Professional lasers (244 nm - 3.39um)
Inter Cavity Optics
Frequency Reference Cavities
Optical Instrumentation |
|
The laser mirror mounts are high-precision trans-adjustment devices, specially conceived for the use as resonator mirror mounts. Using a RT 65 industrial slide and a S 65 profile rail, a highly stable professional laser resonator can be set up. The adjustment mounts have a central hole with a 35 mm diameter to hold mounted optics or other components. The horizonatl and vertical angles can be adjusted independently of one another. The maximum tilt is 6° (±3°).
Fine-thread screws with a 0.35 mm pitch are available as adjustment elements. On demand, short fine-thread screws with hexagon socket and locking are available for application in serial devices.
- for use with SYS 65
- suitable for mounting laser resonators
- mountable onto pin or slide
|
|
| The value for money deflection unit range from RAYLASE. The RLA series provides you with reliable and efficient deflection units at competitive prices without cutting corners on quality. The RLA series is available with 10, 15 and 20 mm apertures ideal for use with Nd:YAG and Carbon dioxide lasers. |
|
NTI's RazorHead Scan Heads offer higher performance in a ruggedpackage. The scan head is designed to ease design-in and manufacturing issues by reducing the need for specialized professional tooling and highly skilled assemblers.
Packaged in a class IV enclosure, RazorHeads can operate in harsh industrial environments. They arrive to you optically aligned, electrically match tuned and ready to manufacturer of bolt up, professional plug in and operate with most professional laser systems.
The RazorHead can be configured for different scan angles and wavelengths. They are available with digital or analog electrical professional interface options.
Advanced laser / professional scanner PROFESSIONAL PC based professional control electronics and professional software are available to support the full range of your integration requirements.
Throughout the assembly process, all NTI scan heads are run through a professional battery of tests and must pass an extensive over night burn-in. Each head makes witness marks before leaving NTI. Component information and performance data in is stored in a device history record.
RazorHeads feature NTI's reliable and most accurate RS-15 galvanometers with exclusive SLR stator technology for superior performance. RazorHeads also feature high quality professional ceramic ball bearings manufacturer for long life operation. |
|
| All-Digital Scan Head Components. Advancing the State-of-the-Art of Galvo-Based Professional laser Steering Systems, Cambridge Technology has a full complement of All-Digital Scan Head Components allowing you to simplify your system integration while cost-effectively providing your customers with the fastest, highest performing, highest marking speed, intelligent laser scanning capabilities worldwide. Self-tuning digital servos with real-time status back-channels, ethernet-based marking system controllers, USB-based all-in-one controller/servos are all available to complement the wide selection of high-speed, high-stability galvanometers and lens-ready open-frame mounting blocks. |
|
| Cambridge Technology offers a wide variety of professional laser quality first surface mirrors for single and multi-axis applications. All standard mirror substrates are fabricated from either fused silica or silicon, depending on the scanner model. Other substrate materials are available. The standard flatness of all mirrors is Lambda/4 at 632.8nm. The standard surface quality scratch/dig figure is 40/20. Other surface quality specifications are available, contact a Sales Engineer for more details. CTI mirrors are designed for scanning beam diameters as small as 3mm and as large as 75mm. CTI mirrors are also designed for single and multiple axis configurations. Each galvanometer has a specific mirror set due to the inertia of the mirrors. All CTI mirrors are mounted in a mass balanced configuration for optimum scanning performance. The reflective surface is specified to be parallel with the axis of rotation to within 3 milliradians. All prices include the mirror mounts to couple the mirrors to the appropriate optical professional scanners and mounting labor. Volume discounting is available. |
|
Research Electro-Optics, Inc. (REO) produces laser components with the highest performance and greatest reliability worldwide utilizing its superior optical fabrication, superpolishing, and precision thin film coating capabilities. REO manufactures high reflector mirrors, output couplers, beam steering optics, edge industrial filters and Brewster windows which offer the best available performance in terms of scatter, absorption, spectral characteristics, stability, laser damage threshold, and plasma durability.
Features
Superpolished Substrates
Plano and Spherical Optics (1 cm to infinity radius of curvature)
Ultra Low Scatter & Absorption (as little as 1part per million)
Ultra High Laser Damage Thresholds
Ion Beam Sputtered Coatings
Mirrors with Extremely High Reflectivity (up to 99.999%)
Extremely High Ultraviolet and Plasma Durability
High Moisture and Temperature Stabilities
Applications
Professional lasers (244 nm %u2013 3.39um)
Inter Cavity Optics
Frequency Reference Cavities
Optical Instrumentation |
|
| The 2D CAD PROFESSIONAL PROJECTOR is a professional laser device that utilizes the light power of a laser source with the speedy positioning of a galvanometric system in order to produce whichever type of geometric figures and not. It could be interfaced with ever | | |
Laser components
