|
|
AGIPRO - MIXEL Agitator for container
Are you looking for THE economical and efficient tool to mix liquids into 1000 litres cube-like containers?
The set < Agipro 125 quick agitator with fixing holder for container › is made for you.
The fixing holder has been especially designed to enforce stability of the AGIPRO agitator and to maintain it on a 1000 litres cube-like container in total safety. You can use Agipro 125 quick agitator for mixing, homogenization, storage or suspending solids into liquid.
The MIXEL agitator AGIPRO 125 (or AP 125) is designed to mix liquids into 0.5 to 1.5 m³ tanks.
Technical specifications:
- MIXEL TT type propeller – diam. 125 mm
- Motorization 0.75 Kw at 1500 rpm
- Agitation shaft length 1200 mm
|
|
Fixed Angle Applications - For blending, homogenizing and temperature uniformity duties
Swivel Angle Applications - For tank cleaning operations and the preventions of harmful sludge build-up
Pipeline Power Mixers - For the petrochemical industry
Unique Advanced Propeller Design - Featuring high pumping, high thrust, minimum power draw, no cavitation, solid reliability
Unique Side Entry Mixer Tank Shut-Off Device - Permits the bearings and mechanical seal to be changed under full tank conditions
|
|
High Pumping
High Thrust
Minimum Power Draw
No Cavitation
Solid Reliability
|
|
SK800 A Small Side Entry Mixer
Features.
l Helical bevel gear drive;
l Rear side seal maintenance
l Extended bearing arrangement to ensure long seal life
l Novel seal change method
l Shut off device when leaking emergency.
l Up to 4KW for small size tank application
l Sanitary option for pharmaceutical and food industry
|
|
Agitators
With more than 50 years of experience, VMI-Rayneri designs and manufactures a full range of agitators/mixers for various types of mixing operations through the most optimal methods available. Whether for dilution, dissolution, suspension of homogenization of dispersion or emulsion, we will very carefully study your processes in order to better define the sizing, power and speed parameters which are best suitable to the achievement of liquid-liquid or solid-liquid mixtures with a strong concern for quality and productivity.
A wide range of agitator blades, with radial or axial effects, helps optimize phenomena related to movement and shearing, whatever are the required capacities and the rheological characteristics of target products.
|
|
Ideal for simple blending, solids suspension, high-viscosity and gas-liquid
applications up to 400 L
Compact design is ideal for small vessel heads
Fixed- or remote-variable speed control
Economical, standard and high-torque models available
Choice of electric or explosion-proof air motor
High-efficiency A310 impeller is standard
Year 2000 compliant
|
|
Inside crude oil (or products issued from oil) storage tanks, side entry mixers designed by MISSENARD-QUINT :
- avoid the main deposits, which permits a wider exploitation
- disperse salty pockets of water included inside petrol.
- homogenise crude contained inside tanks.
- melt products issued from crude oil to obtain finished products
CHARACTERISTICS
1. fixed angle or swivel angle (manual orientating device)
2. transmission
. bevel gear reducer (type F 1003)
. pulley-belts (type F 1201)
3. sealing
. stuffing-box (P)
. single mechanical seal (G)
. double mechanical seal (GD)
. single mechanical seal + stuffing-box (PG)
Nota: device for the replacement of the mechnaical seal in full tak condition
4. range of power from 4 to 55 kW
5. protection of the mechanical seal
. steamed reheating
. steamed cleaning (vapor quench)
Design, manufacturing and tests effectuated in our workshops.
Note : We also manufacture side-entry mixers specifically design for food insdustry.
|
|
|
|
|
|
SunKaier's side entry mixers are available in a variety of configurations for a wide range of applications including pulp and paper, petroleum, chemical and food processing and FGD applications.
Belt driven and gear driven designs can be equipped with mechanical seals. For ease of maintenance, Side Entry Mixers feature an shut off device that permits work on seals without emptying tank contents.
Available motor options are extensive due to the use of standard NEMA or IEC configurations.
* Modular design for better match of mixer to specific application, plus optional field interchangeability between direct drive and gear drive.
* All metal housings ?high strength aluminum or optional stainless steel housing and motors
* Lifetime lubrication of gear drives
* Permanently sealed bearings prevent process contamination
* Full range of output speeds to tackle your specific mixing process
* Standard NEMA C-Face motors assure readily availability of replacement motors
* Energy saving, AC electric C motors with either 115/208-230V single phase or 208-230/460 V, 60Hz or 190/380 V, 50 Hz, 3 phase, with 1.15 service factor are standards. DC electric and air motors are also available
* SunKaier Guarantee of Performance
|
|
|
Flygt mixers are used in a wide range of mixing duties such as solids suspension, liquid blending and destratification. Submersible mixers have a compact design, which together with Flygt’s installation methods makes them easy to install both in new and existing tanks. They can be found in operation at wastewater treatment plants, on oil and gas rigs and supply ships, in aqua and agriculture and in the steel and metal industry. Unlike their dry-mounted counterparts, submersible mixers provide unlimited freedom of positioning and orientation. By utilising this freedom, the mixer jet is allowed to develop and create efficient mixing of the entire volume. Flygt’s compact mixers are made of stainless steel and provide a cost-efficient alternative for most mixing applications.
|
|
Description
Faggiolati's mixers are projected for optimal mixing, homogenising and agitating operations in civil and industrial waste-water purification plants. The high performance ratings allow a considerable reduction in running costs.
The non-clogging propeller profile, combined with an accurate projection, guarantees optimal running condictions with absolute reliability.
Applications
Thanks to their versatility, Faggiolati's mixers can be used in a wide range of applications. The combination of various construction materials, the stainless steel propellers and bouble silicon carbide mechanical seals allow the use of these mixers in highly corrosive conditions and at high temperatures. Typical applications for these types of mixer are:
- homogenisation of heavy sludge or liquids with solid particles
- Removal of sedymentary deposits.
- to avoid ice formation.
|
|
|
|
|
|
Immersed agitators TR 14 to 226
Pumps of recirculation RZP
BEACHES Of USE
Diameter of the pale ones: 14 cm to 2,6 m
Pushed: 45 to 5000 NR
Nominal nominal output: 0,5 to 18 kw
Number of revolutions of the pale ones: 17 to 1450 tr/min
Depth of immersion max: 20 m
Beaches of temperatures: 3 to 40 °C
APPLICATIONS
Homogenization, put in suspension, circulation of effluents in any type of basin
Adapted to the urban cleansing and the water treatment, the range of agitators Salmson d' Emu Technology covers the following applications: post raising, zone of contact, anaerobic zone, zone anoxia, activated sludge basin (circular, rectangular, in channel...), covers with
muds, pit with greases, basin plug, basin of storm...
In industry, homogenization of various fluids, put in suspension of charged, corrosive or abrasive fluids
ADVANTAGES
In comparison with the standard ISO 21630, agitators TR have a high specific push in comparison with competition
Tight entry of cable, protection against traction
Oblique rolls of the dice guaranteeing one long life of life
Room of sealing preventing all risks of oil escape of the mechanical seal
Option: probe moisture in the room of sealing
Carbide mechanical seals of silicon and radial joints of axis
The pale ones of the propeller are rigidified so as to obtain the best possible hydraulic effectiveness
Various stages of gears allowing a great beach speed for an optimal result
|
|
Sterling Halberg sludge mixers of the MFS type ensure intensive treatment of sludge is possible in cylindrical, cylindrical-spherical or egg-shaped digesters. By reversing the flow direction important progress requirements are fulfilled.
• TECHNICAL DATA
- Flowrate:350 – 7200 m3/h
- Speed:1500 – 420 rpm
- Direction of rotation:cw and ccw
• FEATURES
- uniform operation in either direction
- heavy duty construction
- low energy consumption
- suitable for digesters of concrete and steel
- automatic lubricating system
- direct drive
- uniform distribution of temperature
- sturdy propeller construction
• ADVANTAGES
- thorough and uniform mixing
- long term use without dismantling
- low operating costs
- adaptable installationlow cost of up keep
- no V-belt maintenance
- improved sludge fermentation
- suitable for many different sludge conditions
|
|
Made in lengths of up to three meters, complete with PVC support plate. They may be supplied, with axial-flow or centrifugal flow, with a rotation speed from 2800 to 600 rpm on the work they have to perform.
Due to their constructional detail they are suitable for use in purification and neutralisation plants and for the mixing of reactants, additives and flocculants in tanks with volumes of up to 20 m³.
|
|
|
FLUX offers a complete range of mixers for agitating, mixing, stirring or homogenizing operations within containers of 30 to 30.000 Litres. The complete range of mixers is based on a modular design, allowing the user to select the individual component parts to meet his specific requirements.
|
|
Centrifugal turbine agitators designed for proper agitation of water solutions or lower viscosity liquids in tanks with a capacity between 100 and 300 L/H (26-80 GPH).
It features a double action centrifugal turbine:
Three long distance radial jets, with sweeping effect arround the turbine to produce the rotation of the liquid.
Three axial jets to stir the bottom and create a vertical stream.
|
|
It is the agitator the more installed, generally on the top of the tank (as showed hanging configuration or associated to a bottom bearing), either on the bottom of the tank.
It is composed of :
. one driven head out of the vessel
. one agitation axis with one or several stages of agitating parts
The picture shows a configuration type hanging which in function of the case (constraint regarding to kinematic chain) has to be associated to a bottom bearing.
The interface driven head / vessel can be equiped with different type of sealing :
. mechanical seal
. gasket
. drip
. stuffing box
Design, manufacturing and tests are effectuated in our workshops.
|
|
Metso Minerals Attrition Scrubbing machines are simple, yet highly efficient units for scrubbing particles at densities of 70 - 80% solids.
Two opposed Helix type propellers on each shaft force particles against each other, resulting in intense scrubbing, polishing and disintegration. Efficiencies generally increase with and increase of the density of the pulp, as particles have more frequent grain to grain contact. The twin propellers, mounted on a shaft inside a tank, are supported by a heavy-duty steel structure. Shafts are coupled to either gearbox or spindle bearing drives. An opening in each cell partition allows pulp to flow through the machine. Machines are usually supplied with two, four or six cells, with each cell ranging in volume from 4 to 9900 liter’s. (1cubic foot to 359 cubic foot). Odd cell arrangements are also available as custom supply
|
|
SunKaier SK300 series utilizes a double reduction helical/bevel gear or singlereduction bevel gear reducer to provide a rugged, reliable drive with high shockload capacity for years of trouble-free service in the most challenging applications. Housings are close-grained cast iron with oversized output shafts for high torsional and bending stresses and includes drywell construction. Foot mounted or C face motors are used.
Horsepower Range: 0.37KW to 4.0KW
Speed Range: 50 to 280 rpm
Reduction Type: Helical/Bevel
|
|
Standard range: HELISEM®
The HELISEM® line, including three standard mixers, is designed for economical mixing solutions, available with short deliveries. It has a broad range of applications, including water treatment, fine chemicals and end-products industries.
Open and Sealed tank up to 250 m3.
Custom-made range: ROBIN®
The ROBIN® line of customized mixers is ideal for complex processes running in extreme conditions, best suited to the requirements of hydrometallurgy, the chemical and petrochemical industry, and fine chemicals. The list of possible applications includes alumina refining, fermentation, polymerization, phosphoric acid, resins and high viscosity products, to name but a few.
Pressure up to 250 bar
Temperature up to 350 °C
Volumes from 0.010 m3 to 10,000 m3.
|
|
The IKA-ROTOTRON is a jet flow agitator. The jet tube cares for intensive, directed flow. Therefore this agitator is especially suitable for mixing of high-viscous media, even in rectangular containers. Moreover this agitator is especially suitable for submerse incorporation into extremely big containers. This makes the use of extremely long and big agitators of common type unnecessary.
The IKA-TURBOTRON construction series does not have a fixed jet tube. Instead of the jet tube different mixing tools like propellers, turbines or toothed disks can be chosen according to the respective application.
|
|
The ROBIN® line of customized mixers is ideal for complex processes running in extreme conditions, best suited to the requirements of hydrometallurgy, the chemical and petrochemical industry, and fine chemicals. The list of possible applications includes alumina refining, fermentation, polymerization, phosphoric acid, resins and high viscosity products, to name but a few.
Pressure up to 250 bar, 350 °C.
Volumes from 0.010 m3 to 10,000 m3.
|
|
All-stainless construction helps eliminate the potential for contamination in critical sanitary applications.
300 series stainless motor, gear and bearing assembly
Available in 1725-rpm direct drive, and 280- or 350-rpm gear drive
Fixed-mounted mixers available in various speeds
Washdown-rated, inverter-duty motors from 1/2 to 3 HP
Oversized bearings with L10 life exceeding 100,000 hours
Permanent sealed lubrication
Flexible motor coupling
Solid 300 series stainless steel flanges
|
|
Chemineer Agitators are robust, simple and designed for ease of maintenance. The drive has a minimum of moving parts, while NC machining of the housing and the subassemblies ensures trouble-free interchangeability and precision parts mating.
Engineered for the ultimate in process compatibility, Chemineer manufactures a range of agitators to suit almost all applications
Available in drive sizes from 0.25 to 1,000 kW - even more for specialized applications. A wide selection of mounting methods, materials of construction, shaft seals, shafts, impellers and accessories can provide the best turbine agitator for virtually any process.
|
|
SPECIAL MIXERS
with PP - PVDF - AISI 316 IMPELLER and SHAFT
with plastic impeller and shaft, designed to process aggressive chemicals
with gear drive for high-viscosity liquids, available with plastic or metal impeller and shaft
with AISI 316 stainless steel impeller and shaft
POWER RATING:
from 0.13 HP to 0.75 HP
SHAFT LENGTH:
PP and PVDF from 600 to 1400 AISI 316 from 850 to 2000
MOTOR:
direct or gear
220, 380 or 12 V from 35 to 940 rpm
WEIGHT:
from 5 to 14.5 kg
|
|
Agitators
This is one of the most comprehensive agitator lines in the industry, including fast seal removal, coaxial with independent drives, magnetic drive for non-polluting production and sterile product treatment, side entry, and compact designs. Many options are available, including standard or customized agitators, as well as systems.
The manufacturer is one of the world's leaders in agitator engineering and is 9001 certified.
|
|
From 30KW to 1000KW and 15RPM -300RPM
Ideal for medium-capacity mixing needs, the rugged RAM MDX has been performance-proven through years of operation in a diverse range of demanding installations.
|
|
The HELISEM® line, including three standard mixers, is designed for economical mixing solutions, available with short deliveries. It has a broad range of applications, including water treatment, fine chemicals and end-products industries.
Open and Sealed tank up to 250 m3.
|
|
Agitator for digestion or methanization tank
Sludge coming from waste water plants is full of methane.
In order to reduce volume of sludge (30 to 40%) and to deodorize it, sludge is transformed inside a digestion or methanization tank.
An agitator turns in this heated tank, separating methane from sludge. This methane is collected at the top of the tank and used to heat tank.
Then, digested sludge is dehydrated and used to fertilize agricultural soil.
MIXEL has designed a new agitator for equipping digestion or methanization tank:
- vertical agitator, with double level of propellers (TTF profiles propellers, with converging edge to avoid aggregation of tows;
- agitation shaft up to 20 m
- hydraulic seal
- Guiding turret.
MIXEL has equipped up to 5000 m³ digestion tanks, in France, Algeria and Marocco.
|
|
Adjustable Agitators
VMI Rayneri has made a specialty of adjustable mixers covering a wide set of applications ranging from laboratory agitations to industrial mixers of small and medium capacities. Coupled with a wide choice of turbines and propellers adapted to the desired processes, these agitators are designed to reconcile maximal ergonomics for the operator, a very high level of safety and impeccable mixing quality.
Turbotest is the bench agitator par excellence. It is the essential tool for any bench testing, formulation, quality tests, new product development, and new processes and formula improvements. It has no equivalent for scaling tasks from the laboratory to industrial manufacturing.
The Mobimix range, consisting of simple agitators on lifting frames, is specially designed for industrial applications of small capacities as well as for pilot mixing.
|
|
The HELISEM® line, including three standard mixers, is designed for economical mixing solutions, available with short deliveries. It has a broad range of applications, including water treatment, fine chemicals and end-products industries.
Open and Sealed tank up to 250 m3.
|
|
|
|
Agitators for tanks
