|
|
| Products 121 to 150 of 248 |
Versatile, inexpensive manual dispensers are ideal for touchups, low-volume assembly and field work. They can be used with all EFD syringe barrels, pistons and tips.
The ReliusTM DispensGun® features 10:1 mechanical leverage that makes it easy to dispense thick materials like greases and silicones without hand fatigue. A clean cutoff when the trigger is released prevents oozing between fluid applications.
Designed for use with EFD syringe barrels and pistons, Relius Hand Plungers provide a clean, comfortable alternative to squeeze bottles and hand syringes.
|
|
The 2800 Series positive displacement dispensers are ideal for applying uniform amounts of two-part epoxies and other fluids that change viscosity over time.
Compressed air is not required%u2014instead, these electrically operated units use stepper motors and patented technology to advance and retract a piston inside the syringe barrel. They will produce accurate, repeatable deposits, regardless of changes in fluid viscosity or temperature.
|
|
EFD's Ultra® 2800 Dispensing System is perfect for applications that require precise metering of assembly fluids with changing viscosity or where a specific flow rate is necessary.
The system features a unique, patented technology that gives the user precise, repeatable results %u2014 regardless of changes in fluid volume, viscosity and temperature. This technology eliminates the need to adjust settings throughout the syringe barrel dispensing cycle, including the need to compensate for changes in fluid viscosity.
The 2800 System is electro-mechanically operated and does not require the use of compressed air. A powerful stepper motor is contained in the benchtop controller, keeping the handheld drive cable lightweight and easy to use .
|
|
|
DOPAG components are used in various areas of industry to apply low to high viscosity media especially when high precision and exact repeatability of the dispensed volume is required.
|
|
The VDP150 precision volumetric dispensing pump is a pneumatically operated positive displacement valve designed for constant volumetric dispensing of low to medium viscosity fluids. The double acting metering valve has a volume range of 0.005cc to 0.015cc.
Features
• Designed for low to medium viscosity materials
• Stroke adjustment provides shot size control
• Suck-Back eliminates post-dispense "dripping"
• Dispenses accurate micro-shots of 0.005 to 0.015cc
• Integral inlet/outlet check valves
• Positive Displacement metering
|
|
|
|
|
|
In the perfume and aroma industries there has been no satisfactory solution up until now for the accurate mixing of substances in powder form. When powders clot or form dust, this can lead to weighing errors, blocked valves etc. resulting in frequent production downtimes. And this is not even including the problematic conditions for safety at work due to the dust emissions.
With increasing frequency we were being asked by customers for powder dosing systems that would apply the dosing technology know-how for which our company is renowned, since FRICKE systems were mainly developed up until now for use with liquid substances.
Thus, the FRICKE PD1 powder dosing system was especially designed for use with the powders of the perfume and aroma industries. The system is equipped with a 4 kg scale (dissolution per 1 mg) and automates the production of 20 powder components.
The powders are stored in tightly sealed stainless steel containers with a 10 litre capacity. The containers can be equipped with different dosing elements and agitators according to the various powder characteristics. This allows a clot-free as well as dust-free processing of the powders - neither personnel nor machine systems are subjected to emissions.
|
|
Powder feeders can be supplied in all size ranges to suit the individual application.
The design incorporates an anti 'bridging' devise to ensure uniterrupted flow.
Additives such as iron oxide, starch, vein seal, etc. have been successfully applied with this unit.
Capable of feeding various powders into the mixers such as iron oxide, vein seal, starch, etc.
|
|
Powdering and dosing machine for dry ingredients, based on an exclusive patented principle : Alternate accelerations with horizontal direction.
- Good sprinkling effect on large width : up to 1500 mm.
- The output flow can de split in numerous tracks, the width of each track can be easily changed.
- High dynamic of the system : min dosing time 0.5".
- High dosing stability on the width with good repeatability (Standard variation < 5%).
- Built according GMP rules.
- Can cope with many types of ingredients.
Application : foods, drugs, chemical industries.
- No risque of injury for operators.
- No wearing parts, no risks to damage the powderer if metallic parts are in the ingredient.
For more details see pdf data sheet
Fine dosing,: because every gram is important !
|
|
This tubular powderer has been created in order to combine, for a given width, a precise dosing and a perfect distribution of a large number of powdery or granular products, like sugar, spices, metallic oxides, talc, resins, cocoa.
The tubular powderer can be applied to different purposes: encasers feeding or other mixing processes, powdering on belt conveyors, plates, moulds, etc.
|
|
|
|
|
|
Precision Dispensing Pump for UV Sensitive Fluids
Fluid Metering, Inc. of Syosset, NY
announces their new VMP Electronic
Variable Displacement Metering Pump
for accurate dispensing of UV (Ultra-
Violet) sensitive fluids.
Typical fluids that fall into this category are,
UV curable adhesives, UV coatings, and
photo lithography chemicals.
The VMP Variable Displacement
Dispenser is a fully programmable
dispensing system, which utilizes FMI’s
patented CeramPump® Valveless piston
pump design. A precision stepper motor
controls the pump speed.
However, what makes the VMP truly
unique from other FMI dispensers is the
addition of a second stepper motor, which
electronically adjusts the piston
displacement. This provides ultra-fine
dispense adjustments through varying of
piston stroke length.
The VMP can be programmed for a variety of functions using a user-friendly Touch Screen Interface (TSI) which can control up to 16 pumps on a single bus. Up to 128 metering devices
can be controlled using a PLC or computer.
The VMP will store up to 100 programs letting you change between setups on the fly. For UV applications, the pump head is made from either 316 stainless steel or opaque PVDF to isolate UV light from the process fluid as it travels through the pump head.
Typical applications include dispensing of UV curable adhesives for medical component assembly, photo resist for printed circuit and semiconductor manufacturing, and UV adhesives & coatings for DVD manufacturing.
|
|
The microdispensers DMP range has been specially designed for a very highly accurate microdosing of all kind of powdery products. They are often used for accurate filling operations with powders.
Its operating principle makes possible a high rate dosing.
Dosing from 0.05 to 150 grams
Accuracy: ±1%
Rate: up to 1 dose per second
|
|
A shaft encoder records every hundredth of a turn, and a preselection counter is used to set the number of turns corresponding with the volume - and hence weight - you need.
Once this machine reaches the number of turns needed, the screw stops, and the filling system is ready for a new container.
|
|
|
|
|
|
EVERYTHING about dispensing that has been valued in terms of precision and consistency. Autotronik High Precision Dispenser System was designed to concentrate on the essentials, which is cost effective and simple to maintain.
Super fast valves and clever control firmware ensure perfectly controlled dispensing processes. With this elaborate technology and little need for cleaning of the dispensing head, the unit can be used much more effectively. This does not only apply to conventional dot sizes, but also for any sort of microdot, down to a diameter of 0.15 mm.
At the center of the demand for high precision stands the Advanced-Time-Pressure (ATP) method. This is supported by reliable electronics, five super fast valves and highly accurate temperature measurement. All support the automatic calculation and control of precisely appropriate pressure pulses to ensure absolutely constant dispense volumes.
Adhesives, too, can be used without problems. The patented dispense head heating prevents 'stringing'. When dispensing thin potting compounds, for example, the ATP method of the Autotronik High Precision Dispenser System proves its worth. Cartridge fill levels are automatically determined by the pressure built up response and the required snuff back vacuum applied.
|
|
|
|
|
|
NEMO® Dispensers guarantee the highest level of precision in dosing and reproducibility. For this reason, NEMO® Dispensers and NEMO® Hand Dispensers are employed in a great variety of applications and industries.
Such as:
- in vehicle manufacturing
- in the electronics industry
- in renewable energy resources
- in the pharmaceutical and foods industries
- in other adhesive and sealing industries
Features of NEMO® Dispensers and Hand Dispensers
- very gentle conveyance
- compact dimensions at a high number of stages
- large cross sections of inlet
- conveyance also of compacted products
- conveyance of solids
NEMO® Dispensers and Hand Dispensers offer you:
- conveyance volume in proportion to rotation speed
- high dosing precision
- drip-free dosing
- constant low-pulsation conveyance
- high efficiency
- low life cycle costs combined with easy serviceability
Everything from a single supplier
Our broad product portfolio makes it possible for us to design complete dosing systems for you. Take advantage of our many years of experience and know-how.
|
|
Features:
- Provides a low-cost means of dispensing fluids accurately, to better than 1%.
- Ideal for repetitive and volumetric dispensing of acids, solvents, and aqueous solutions.
- FMI's unique low-dead-volume, valveless pump heads.
- High accuracy, synchronous motor drives.
|
|
|
|
|
|
Economical, Easy-to-Use Quick Disconnect Chemical Dispensing System
The DrumQuik® PRO chemical dispensing system from Colder Products Company provides safe, easy and economic extraction of chemicals from drums, jerry cans and other bulk transfer containers while helping to reduce costly spills, contain hazardous fumes and enhance workplace safety. The easy-to-use, closed-system design combines into one integrated unit a recyclable bung closure and dip-tube with a reusable quick disconnect coupler, ensuring that both sides are sealed from point-of-origin to point-of-use.
With DrumQuik PRO, users easily dispense chemicals by removing a shipping plug and then locking the coupler in place. This eliminates the need to install, remove or clean a dip-tube, minimizing the potential for fluid or vapor contact while allowing fast changeovers.
No special tools are required to connect the coupler to the system. Clean-up and disposal are easier, because the low-cost drum insert and dip-tube are recyclable. The quick disconnect coupler can be easily rinsed and cleaned for reuse.
Ideal for single-use applications, DrumQuik PRO is made from FDA-approved polyethylene material that is compatible with most general chemical uses.
|
|
EFD’s Radial Spinner System makes it easy to apply neat, consistent bands of low-to mediumviscosity fluids inside cylindrical parts between 0.4” and 5” in diameter.
Compact size and precise control make the Radial Spinner System ideal for processes where fluid must be applied inside small cylinders or confined to specific locations and kept off surrounding areas. Inert wetted parts make the system ideal for use with reactive fluids like cyanoacrylates and anaerobic adhesives.
The Radial Spinner System includes a precision dispense valve, air motor, bracket, valve/motor controller, disc assembly and dispense tip. Disks and tips are available in different sizes to meet a wide variety of applications.
|
|
The RT404-FLEXII series of rotary table dispensing turntables provides an efficient method of dispensing a circular pattern on areas that are difficult to access. The tilting Z-axis allows controlled rotary dispensing on an angle.
Features
• Dispenses from syringes, cartridges, or valves
• Rotation of 0-900º
• Adjustable Z-axis including tilt control
• Variable speed table
• Simple to set up and operate
• Fully programmable for perfect dispensing
• No computer skills required
|
|
Patented FoamMix systems produce foamed material from a variety of flowable sealants, incuding silicones, urethanes and plastisols at elevated or ambient temperatures.
|
|
|
Ranging from simple quench fluid tanks to highly complex buffer fluid set-ups, our systems generally have a modular structure and are tailored to individual requirements. Depending on their design, these systems cool or lubricate, circulate, apply pressure, protect against icing and ensure that mechanical seals work reliably, last longer and do not allow any leakages to escape into the environment.
|
|
|
DOPAG single component pumping and metering systems are assembled from DOPAG pumps, components and high-performance electronic computers, producing systems that will pump and meter single component media with maximum precision.
|
|
Technical Data:
-Steel frame, zink plated
-Rollers
-Balancer
-Mixing block
-Pneumatic control
-Stainless steel piston pump
-Swivel boom made out of stainless steel
|
|
Spray rinse valves are used to clean the inside of vessels or reactors without having to open or close them. Water, steam, solvents and anti sticking agents can be used and are sprayed in a distinct and efficient manner in the vessel.
Fetterolf Corporation invented the Spray Rinse valve in 1983 and since then has become a world market leader in this segment. The valves are frequently used in the Plastics and Polymer (especially PVC) industries and by pharmaceutical companies
SchuF Fetterolf provides two separate types of spray rinse valves - with spray slots in a rotating head or with nozzels in a linear head.
|
|
|
OK International offers dispensing syringes and needles to meet all of your dispensing needs. Our components are silicone and chloride freeand work with industry standard equipment.
|
|
UV Block
Amber syringe barrels block UV and visible light wavelengths between 240-550 nm, while allowing fluid level to be monitored. Available in 3cc, 5cc, 10cc, 30cc and 55cc capacities.
Light Block
Opaque black syringe barrels provide complete protection for light-sensitive fluids. Available in 3cc, 5cc, 10cc, 30cc and 55cc capacities.
|
|
The dispensing table-top robot TR300 designed and produced by mta automation ag is controlled by an industrial PC allowing the automation of dispensing operations for liquid or viscous products. The increasing demands of customers in term of quality, precision and repeatability lead to increasing levels of automation. However, when production batches are small or products widely dissimilar, the cost of sophisticated equipment can place automation beyond the reach of many would-be users. In order to satisfy this need, mta developed a table-top robot which combines flexibility with required high levels of process quality and repeatability, all at a reasonable cost.
The 3 or 4 axes can be fully programmed, as are the dispensing parameters for each dispensed point.
|
|
Engineered to specifically address the waste and discomfort that result from dispensing materials in collapsible tubes. A comfortable, balanced design that safely protects the tube from damage and the operator from contamination.
First time users are recommended to supply a tube sample.Features
• Eliminates waste
• Avoids material contamination
• Improves operator safety
• Prevents tube damage
|
|
This tubular powderer has been created in order to combine, for a given width, a precise dosing and a perfect distribution of a large number of powdery or granular products, like sugar, spices, metallic oxides, talc, resins, cocoa.
The tubular powderer can be applied to different purposes: encasers feeding or other mixing processes, powdering on belt conveyors, plates, moulds, etc.
|
|
The development of robotics has led Matrasur Composites to widen its equipment offer, manual and automatic by integrating an internal Robotic Service in the company, completely dedicated to the design of robotic solutions.
The new generation of spray-up robots from MATRASUR Composites covers various stages of composite part production: gelcoat spray-up, resin spray-up, simultaneous spray-up of resin and fibreglass, and spray-up of demoulding agent.
Two programming technologies are available: Self learning (ROBOMAT series); the robot memorizes and reproduces the best operator’s movements endless number of times, or In-line programming based on a simulation software (ROBOSTRAT series).
|
|
|
|