|
|
The model DV509 diaphragm valve is designed for precise flow control of low to medium viscosity liquids with a minimum shot size of 0.0001cc. The diaphragm separates the wetted parts from the air supply which makes it suitable for dispensing cyanoacrylates, reagents, anaerobics, UV adhesives and resins, paint, ink, solvents, glue, electrolytes, alcohols, and other volatile substances.
Features
• Designed for low to medium viscosity materials
• Stroke adjustment provides shot size control
• Minimum shot size 0.001cc
• Suitable for machine integration
• Will dispense hazardous materials
• Has a high cycle rate of 500 shots a minute
|
|
General-purpose valve is ideal for dispensing controlled amounts of most low- to medium-viscosity fluids. Wetted components are machined from inert UHMW (Ultra High Molecular Weight) polymer, making the 752 Series ideal for use with cyanoacrylates, anaerobic threadlockers and other reactive fluids.
For use with:
Activators
Anaerobics
Cyanoacrylates
Fluxes
Solvents
Fluxes
UV-cure adhesives
Light-cure adhesives
|
|
Deltrol Controls Boiler Dispense Valves are direct-acting, gravity fed (up to 0.2 bar) valves designed primarily for vending applications. They are used to dispense water or similar media from a boiler tank.
Deltrol Controls offers an extensive standard product line, as well as the ability to design custom models for unique applications.
Contact one of our sales engineers to discuss your specific application
Phone: (01) 414 671 6800
Fax: (01) 414 671 6809
Email: brian-cahill@deltrol.com
Website: www.deltrol-controls.com
|
|
The modular self anti-bridging dosing units allow you to dose all kind of bulk products — continuously or discontinuously —– even those considered as difficult.
The interchangeability of the elements that make up these dosers enables them to cover a wide range of large flows and upgradable storage capacities from 50 to 500 litres, according to the requirements.
As a result of a conception that takes into account from the beginning of the process the user requirements, these dosers are simple, modular and reliable. Furthermore, as they are easy to assemble, they are easy to clean when changing products.
These self anti-bridging dosers can be fitted out with a weighing dosing controller. With this element you can obtain a dosing accuracy of ± 0.5%.
These dosing units are specially adapted to products like: flours, cocoa powder, salt, sugar, plaster, kaolin, carbonate, silica.
|
|
|
|
|
|
Optimum cartridges and retainers bring The Clear Advantage™ to fluid dispensing and packaging processes. Every component has been designed and manufactured to provide superior performance that will help you improve yields and reduce costs.
Optimum cartridges are made of a new polymer that provides exceptional clarity, chemical compatibility, impact strength and dimensional stability. The proprietary Zero Draft™ design ensures that the internal diameter is consistent from top to bottom, with no taper to restrict piston travel and affect process results.
Cartridge pistons are molded to exacting specifications so that they mate perfectly with cartridge walls. Their consistent dimensions and fit prevent blow-by and leakage during filling and storage, and precision wiper edges eliminate waste as fluid is dispensed to reduce production costs.
New, see-through cartridge retainers (an industry first) permit easy visual confirmation of fluid levels. Retainer caps feature a large ergonomic gripping surface, a convenient push-in air line connector, and locking tabs that snap into place with an audible click to confirm proper installation.
|
|
|
EFD produces the highest quality syringe barrels and pistons in the industry. Syringe barrels and pistons are produced in our own silicone-free facilities, where they are subjected to stringent quality control inspections throughout the entire manufacturing process.
|
|
Premier line of stainless steel syringes is offered by KD Scientific. These syringes are a perfect complement for the new KDS 410 high force pump. They are rugged stainless steel syringes . They are an ideal solution when the pressures and the forces are high completely eliminating the problem of breaking glass syringes.
Stainless steel offers good resistance to most aggressive liquids. Wetted parts are #316 stainless steel or Viton. Syringes are availabel in 2.5, 8, 20 , 50 ,100 and 200 ml sizes. Luer lock end fittings are available as well as Swagelok.
|
|
|
OK International offers dispensing syringes and needles to meet all of your dispensing needs. Our components are silicone and chloride freeand work with industry standard equipment.
|
|
Not only the right choice of adhesive is important, but also the right equipment. Handling is possible either directly from the cartridge or with our tank dispensing machine from our original packaging. As a result, you can have an exact dosage of different components, from heavy paste to fluid paste.
Our products:
Cartridges
Disensing needle adaptor
Steel needle, economy, luer-lock, flexible, tapered...
Static-mixer
Stopper, caps
Cartridge adaptor
|
|
DATRON PR 0500
High-capacity and multifunctional!
With the new generation of constant-volume dispensing systems DATRON sets the standard in the field of industrial dispensing for small and medium-sized components. At the heart of the dispensing system there are different, exchangeable dispensing heads which can apply a large range of dispensing and materials and adhesives. With the special DATRON accessories, e.g. module clamping systems or CAD/CAM software, set-up times are drastically reduced and productivity significantly increased. Further features such as the automatic nozzle compensation or the XYZ sensor lead to very high process reliability and repeatability also when dispensing critical components.
|
|
|
|
|
|
Ci-DMS is a highly configurable, standard product used to weigh and dispense pharmaceutical raw materials. It is designed to ensure efficient and consistent dispensing of excipient and active materials in a secure data environment with full audit traceability.
As a pioneer in this field, our first such system being installed in 1976, we have always sought to provide the best in system scope and depth by applying the most advanced software tools and practices, always retaining a sharp focus on the practical solution.
Key features include:
- Fully object oriented, modular 3-tier (user, business and data layer)
- Designed to GAMP standards
- Compliant to 21 CFR part 11 for electronic signatures and records
- Fully validated
- Secure access, e.g. complies with NT security procedures
- Secure data, fully relational database
- Configurable interface module to allow MES/MRP/ERP compatibility
- Full electronic lot traceability and audit trail
- Operator friendly screen layouts and prompts
- Multi-lingual facility
- Maintenance and Upgrade contracts
|
|
Description:
The CO.RA. DOSING SYSTEM allows the discharge of the product in a closed cycle drum. It is composed of an electronic weighing system and a DOUBLE VALVE. The vane of the latter transfers a large quantity of product while the rotor completes the requested dosage.
|
|
|
|
|
|
Controlled Discharging System for Iris Diaphragm Flow Control Valves
Features / Benefits:
Actuation of iris valves where individual valve actuators are not cost effective or efficient.
Eliminates reliance on manual tools to open valves.
Eliminates worker direct exposure to the product.
Increases worker safety in situations where access to the iris valve requires an operator to climb up a ladder/platform or reach on the ground.
Can be installed as an independent discharge station for bins, drums, bulk bags, or retrofitted to existing equipment, (lifters, tablet press, bottle fillers, etc.), including integration controls.
Can be set to work on a variety of containers and valve sizes in one package.
Control packages range from simple powered open/close to fully automated systems with preprogrammed open/close, and dosing systems.
All contact materials are T-316L stainless steel with a mirrored polish. All non-contact exposed parts are T-304 stainless steel.
Control system allows for repeatability of activities that can be validated.
Standard Packages:
iValve™ Dosing System - basic package:
This package includes the powered opening system with a control package of powered open/close that is manually controlled with pushbuttons and joysticks. This system is configured to work on a single size and type of iris valve that is oriented in the same location on each container.
|
|
Located in Rochester Hills, Michigan with additional offices around the world, Ingersoll Rand Dispense Systems creates turnkey systems for automatic and manual dispensing applications. Our complete dispensing solutions are configured from standard components to meet customer specific requirements for applications within many different industries.
|
|
The metering task becomes increasingly easier. Pre-mounted complete solutions made by ProMinent are immediately available and ready for the use in important applications. Sensor technology, controllers and metering pumps form a unit with the necessary tanks and are ready for operation without installation work.
Metering systems have three main advantages compared to single components:
* Only one supplier and contact partner
* No interface problems between single components
* No own mounting works necessary. On demand, the whole system will be supplied as premounted and ready for operation or it will be commissioned by our technicians at the spot.
|
|
Superior resist handling
The use of high-torque, stepper motor technology results in a consistent controllable discharge volume. The discharge volume is not affected by changes in viscosity or by filter performance. Repeatable accuracy of 0.3% of the discharge volume is maintained at all times.
* Repeated precision: ±0.3% (F.S.)
* Linearity: ±0.5% (F.S.)
* Resolution: 0.01 ml or below
High Purity
The pump end utilizes a tubephragm design eliminating dead volume and low velocity areas where resist can stagnate. This prevents the collection of particles and allows the pumps to maintain the highest purity possible.
Flexibility in Applications
The discharge velocity as well as volume are easily adjusted to expand the capabilities to many resist-coating processes, including the application of small amounts of resist in a short period of time.
|
|
DX-250 Series Digital Dispensers/Controllers
The DX-250/255 Series dispenses low, medium and high-viscosity fluids accurately and consistently. The DX-250/255 Series is immediately usable anywhere in the world with its accompanying tools, accessories and universal power supply.
The modern-style enclosure has a small footprint and conserves workspace through exterior design that allows multiple units to be stacked and fastened on top of each other. A highly responsive air pressure and vacuum management system, coupled with a digital timing circuit, provides consistent and repeatable fluid dispensing and material waste control. User friendly firmware provides quick and easy setup function.
|
|
The Dispensit® Model 4104a dispense valve controller operates a dispense valve by controlling time, cycle speed, cycle sequencing, system pressure, and reservoir pressure.
Features:
- Electronic dispense cycle counter
- Automatic mode
- Purge mode
|
|
When a precise automatic dispensing timed shot is required, these popular units provide a simple and economic solution to liquid dispensing. The JB1113-LF can be activated by a foot pedal or finger switch to dispense materials supplied in syringes, such as SMT solder pastes, no-clean flux, adhesives, welding creams, thermo-conductive adhesives, etc.
Features
• Manual or Timer Operation Modes
• Foot Pedal or Finger Switch Controlled
• Programmable Digital Timer 0.01 - 31 seconds
• Suck-Back feature ensures no dripping
• Wide range of applications
• Low-cost system with high reliability
• Complete with an accessory dispensing kit
|
|
|
The Adept AnyFeeder provides an economical alternative to well-known, conventional part-feeding techniques. When combined with an Adept robot and Adept vision guidance, the Adept AnyFeeder provides integrated flexible part-feeding. Its flexibility in feeding small parts of various size, shape and material allow for fast line changeover and significantly reduced tooling costs, to give you a crucial competitive advantage.
|
|
Gericke has developed a special feeder (volumetric and gravimetric), which is able to dose sensitive products like dry and half dry apricots or strawberries.
This feeder, based on the GDU series is very well adapted to the difficult characteristic of sticky and in the same time sensitive bulk materials.
Due to the modular structure of the Gericke feeders with various combinations there is the opportunity to make quickly adjustments for new recipes.
|
|
|
|
|
|
Smart Weigh Belt (SWB) Feeders are a key component used for the weighing of a variety of bulk solids in a wide range of processes. The most typical application is for feeding / weighing into a continuous process. The process material may enter the Smart Weigh Belt directly from an upstream hopper or via a prefeed device like a screw feeder.
View Catalog Page
The Smart Weigh Belt can be used as a feeder, batcher, or meter. By utilizing different control software, the Smart Weigh Belt can be used to feed material into a batch system. For inventory control or metering, the Smart Weigh Belt can be placed into a constant speed configuration to measure or totalize the amount fed into a process.
The Smart Weigh Belt offers gentle material handling, an important benefit compared to other feed devices like a screw feeder when handling the following materials:
Flakes (e.g. corn flakes, bran flakes, and wheat flakes)
Lumpy bulk solids (e.g. vegatables and fruits)
Shear sensitive materials (e.g. corn flakes, frozen vegetables and frozen fruits)
High abrasive bulk solids - due to a low friction coefficient applied to the materials
Low melting bulk solids (e.g. fat flakes)
|
|
Fine dosing short-cut feeder is a good and economical solution for conditioning applications, when reduction of dosing time dosing is a must.
These feeders are controlled with motor rpm and outlet section of extractor. For batch process MCPI’s “Short-cut system” is a mechatronic solution which ensures a perfect control of the extractor movement with repeatability below 3/100 sec, to ensure quick and accurate feeding.
The very small overshoot value of these feeders, associated with a sharp control of extractor movement, are the main points to explain the so high level of performances in terms of dosing time and accuracy.
With the different versions of the range, all specific requirements get answers: With Fine dosing short-cut feeder it possible to reach very short dosing time (from 0.2 sec) and feeding quantities from 0.1 gram to many kilo grams.
Design of these feeders is made in agreement with drug and food industries requests for cleaning.
For more details, see enclosed data sheets
|
|
These scales incorporate all the features PRECIA-MOLEN has developed during its years of experience in the field of bulk weighing. The proven concept of one basic design for multi-purpose applications in intake weighing, transshipment weighing and out loading has been maintained in the ABS hopper scales.
Dynamic bulk weighing
Dynamic bulk dosing
ABS hopper scales
|
|
Used for loading powder, granules, or other unwieldy products, like: Flour, cocoa powder, ground coffee, milk powdered, cement, pharmaceutical products, veterinary products, paints, dyes, pepper seeds, and more.
VISEN-TYPE VOLUMETRIC AND/OR GRAVIMETRIC FILLING MACHINE
For powder and granules
Delivering 50 to 50,000 cm3; (Visen D) and 10 g to 15 kg (Visen E2)
Common features:
Robust steel or stainless steel build powered by a motor with a brake or variator.
The filling system is comprised of a vertical screw conveyor, with a diameter suited to the quantity and density of the product you plan to use it with, varying from 10 to 85 mm
Parts in contact with your product in one version are 304 L stainless steel.
This machine can be synchronised with a bagging machine, boxing machine, step-by-step conveyor, etc.
Available in 2 versions:
Visen-D volumetric machines, on stands or for fitting onto automatic machines
Visen-E gravimetric machines, only on stands.
|
|
Flexibly usable at semi-automated or fully aoutomated workstations
Universal dispensing from pressure tank, Euro-cartridge or small cartridge
Variable dispensing times can be set permanently on the device or per cycle through external controls
Vacuum of low-viscous media in small cartridges prevents dripping Individual combination of various, systematic components enables the customer to use remarkable technologies.
Illustrated:
DELOMAT 100 with pressure tank, metering valve and foot pedal
DELOMAT 400
With all the advantages of DELOMAT 100 and extra
flexibility
Variable media supply of up to four independent work
stations, either fully or semi-automatic
Free programming of dispensing-, cycle-and delay times of
four channels
Separate control air outputs for additional units, e.g. slewing
mechanism, pneumatic jack, light-guide lamps
DELO dispensing units comply with the EMV guidelines and have
the CE label.
|
|
Features:
With READY feeder the centralized plant may be easily increased up to 64 machine by simply connecting the motherboard with a twinex cable to all the daughterboards installed on the cyclone assembled on each machine.
|
|
|
|
|
|
Feeders of the Whizzy series offer a wide variety of applications within packaging lines, to dispense folders, promotionals, small gadgets, coupons for bottlenecks, wide sheets, thermosealed bags.
Miniwhizzy
It is the smallest feeder available, with direct current motor, with a speed up to 70 meters/minute to process products up to 150 mm width.
Whizzy
Accurate and versatile, it adapts to the different kinds of packaging lines: with horizontal or vertical dispensing module, available in the Whizzy 210 version for products up to 210 mm width or in the Whizzy 350 version for products up to 350 mm width, with direct current (speed up to 40 mt/min.) or brushless motor (speed up to 200 mt/min.).
Whizzy cb
It is the smallest feeder available, with direct current motor, with a speed up to 70 meters/minute to process products up to 150 mm width.
Whizzy roll
Bandolier feeder to cut and dispense bags with 3 or 4 seams. The material can be supplied on a reel or fanfolded. After reading a notch, the machine receives a stop signal and starts cutting and dispensing the product.
|
|
The DHVP has been designed for products that can be dosed neither by pumps (because they are not liquid enough) nor by standard dry products dosers (because they are too wet): matter blocks, cold fats, filter press cakes.
For your blocky products or in portions, this doser will guarantee a constant and accurate flow without having to break clods.
Operating principle
Three horizontal solid screws drive the fat into the pump and three vertical screws load these horizontal screws.
The latter feeds the fat into an eccentric helicoidal gear pump.
The fat, that has entered the system en bloc, flows out of the doser continuously, with an excellent dosing accuracy, since the pump is feeded constantly.
|
|
Needle Dispensing Kit
Decide for yourself, which needle to use. This kit contains a variety of OK International's most popular 700 Series Needles to let you test different needles to find the ones that fit your needs.
|
|
|
|
Dispensing: Equipment, Accessories
