|
|
Perfect Safety in Every Detail.
- Exchangeable hammer heads with different degrees of hardness for lots of different applications
- Colour coded, different strength faces allow for easy selection
- High-strength hickory handle with ergonomic profile and non-slip surface
A Star in the World of Recoilless Tools.
- Gentle on delicate surfaces and edges
- Recoilless working due to special metal filling in the hammer casing
- Either with hickory handle or steel tube handle
|
|
The tooling can be used with nearly all tool and press systems. Standardised components are used normally. This allows very rapid individual setting up of punch blocks and dies. The simple and intelligent construction guarantees reliable function of all system components. Due to the variable options of feeding techniques this system is suitable for small-batch and large-series facilities.
The versatility of applications, the profitableness, and the efficiency of the processing method, as well as the multitude of adcantages compared with traditional joining techniques make more and more users all over the world to rely on this unique system.
|
|
Clinch studs are inserted through pre-pierced sheets into clinch dies. Initially the hole in the sheet is widened by the calibrating collar. After that, the clinch stud is precentred by means of the calibrating collar. Finally, the sheet material is forced into the annular groove and the Torx locking feature is pressed in. A very high loadcarrying capacity is achieved by means of the patented underhead geometry.
The reduction of production stages and of energy consumption results in considerable cost savings. An additional advantage is the possibility of processing several clinch studs in a single stage.
|
|
End cutter/ Fencing pliers, 2339
Finish: phosphated, anti-corrosion treated.
Material: Chrome-Vanadium steel.
Cutting capacity: iron wire
IP = Industrial Pack
|
|
Tenaza Auto-ajustable
Self-adjusting pliers
For piping/plumbing work, maintenance, electric and automotive jobs. New bit design for a perfect grip on any part. Completely forged in chrome-vanadium steel.
|
|
lance industries specializes in the manufacture of unusual tooling for industrial Assembly Operations
We take pride in creating products that provide long life under the harsh applications of industrial usage
|
|
Slip Joint Pliers 6", 8", 10"
Locking Pliers 6", 7", 10"
Long Reach Pliers 11-1/2"
Diagonal Plier 5" to 7"
Ring Pliers
Misc Pliers
|
|
Combination Pliers
- General purpose pliers for gripping and holding, as well as cutting, soft and hard wires and cables
- Long cutting edges, additionally inductively hardened
High Leverage Combination Pliers
- Power-assisted general purpose pliers for gripping and holding, as well as cutting, wires and cables ranging in hardness from soft to extremely hard
- Long cutting edges, additionally inductively hardened
- Less force required thanks to leverage properties
Needle Nose Pliers (Snip Nose Pliers)
- Gripping and holding, as well as cutting, soft and hard wires and cables, preferably in mechanical and electrical applications
- Pointed, half-round tips with serrated gripping surfaces, capable of withstanding high stresses
- Long cutting edges, additionally inductively hardened
|
|
The PNEUMATIC SPRUE CUTTERS serve to cut the sprue from the piece.
The body is in aluminium alloy, whereas the blades, ordered separately, are in special high strength steel.
The sprue cutters have a one-way type function.
|
|
|
Power cutters have simplyfied cutting and pressing in mass production. Versatile applications of the power cutter by selection of suitable blades, make it possible to increase production. The working pressure is 4-5 bar.
|
|
SQUEEZE-PLIERS™ POWER PACKS—SINGLE STAGE
This group of air operated hand tools comprises three power packs that can be used interchangeably with any jaw set described on page 6. Standard power packs have a stroke of 1 1/2” and may be operated at 60-100 psi. For hand operation each pack is furnished with a lever controlled internal air valve and a 5’ air hose.
|
|
ProHold® Tip Screw Holding Technology Bondhus is the developer and exclusive manufacturer of patented ProHold® tip tools - the best screw holding technology available.
- Holds screws tight on the tool every time
- Available for both hex and star tools
- Bondhus is the only manufacturer making screw holding tools in sizes as small as .050" and 1.27mm
- Smooth tool rotation is preserved
- Does not reduce the strength of the tool or cause damage to the screw head
- Non-magnetic
- Never drop a screw again
- Available in a full range of Hex and Star sizes: .050" to 3/8", 1.27mm to 10mm, and T9 to T60
|
|
Torx® screwdriver, BE-7907 - BE-7940
Screwdriver for Torx head screws with a hole in the end of the tip which fits over a peg in the centre of the Torx tamper resistant fastener. Ergonomically developed 3-component handle of polypropylene and thermoplastic elastomere. Permanent colour codes at both ends of the handle as a timesaving aid for application identification.
Finish: blade matt chrome plated, entirely hardened, tip black oxidized.
Material: blade of VANADIUM-EXTRA.
BE-7940 with double handle.
|
|
Screwdriver Sets
Bits & Bit Sets
Hex Keys & Hex Key Sets
Insulated Tool Sets
Nut Drivers & Nut Driver Sets
Screw Starters
Screw & Hex Accessories
Screwdrivers
|
|
Icon SoftFinish®
- The specialist for dry and general applications
- Comfortable multi-component handle with soft zone for optimum torque transfer
- Chrome-vanadium-molybdenum steel blade, through-hardened, matt chrome-plated
Wiha SoftFinish® electric
- The safe and comfortable insulated VDE screwdriver
- VDE insulated multi-component handle with soft zone for optimum torque transfer
- GS tested, for work on or around live components up to 1,000 V AC
Wiha SoftFinish® ESD
- The ESD screwdriver
- Comfortable multi-component handle with soft zone, dissipative
- Chrome-vanadium-molybdenum steel blade, through-hardened, matt chrome-plated
|
|
|
|
|
|
The screwdriver handle requires little introduction, since anyone who has ever used a tool, is probably familiar with this handle style already. Like many things, however, the screwdriver handle has recently evolved into a more ergonomic and useful design than anything that existed in the past.
Screwdriver Considerations:
A good choice when low to medium torque is required or the blade is smaller than 3/16 inches.
Protects against blade breakage better than any other handle type.
Allows fast insertion and removal.
Allows spinning with the fingertips.
Reaches areas too restricted for operating a T-Handle.
The utility of the screwdriver handle is greatly extended when mated with a ball end tip.
Bondhus® Advantages:
The handle core is molded from durable plastic, and designed to last a lifetime.
The ergonomic design has a comfortable feel in the hand, even after long periods of use.
A slightly cushioned feel helps to prevent fatigue and improve grip.
Handle and blade torque are matched, to prevent breaking the tip.
Bondhus® screwdriver handles, up to 3/16", can generate a screws full recommended seating torque.
The subtle texture covering the handle provides good grip, even when hands are wet or oily.
Bondhus® handles will not roll off an inclined or vibrating surface.
Protanium® Steel
ProGuard™ dry finish
|
|
|
|
|
|
The screwdriver handle requires little introduction, since anyone who has ever used a tool, is probably familiar with this handle style already. Like many things, however, the screwdriver handle has recently evolved into a more ergonomic and useful design than anything that existed in the past.
Screwdriver Considerations:
A good choice when low to medium torque is required or the blade is smaller than 3/16 inches.
Protects against blade breakage better than any other handle type.
Allows fast insertion and removal.
Allows spinning with the fingertips.
Reaches areas too restricted for operating a T-Handle.
The utility of the screwdriver handle is greatly extended when mated with a ball end tip.
Bondhus® Advantages:
The handle core is molded from durable plastic, and designed to last a lifetime.
The ergonomic design has a comfortable feel in the hand, even after long periods of use.
A slightly cushioned feel helps to prevent fatigue and improve grip.
Handle and blade torque are matched, to prevent breaking the tip.
Bondhus® screwdriver handles, up to 3/16", can generate a screws full recommended seating torque.
The subtle texture covering the handle provides good grip, even when hands are wet or oily.
Bondhus® handles will not roll off an inclined or vibrating surface.
Protanium® Steel
ProGuard™ dry finish
|
|
MECHANICAL, HYDRAULIC & HYDRAULIC SELF-CENTERING PULLERS
Capacity 5 Tons to 60 Tons, Two/Three Arms, Reach 225mm to 727mm, Spread 60mm to 920mm in various models, Full Hydraulic Puller Sets, Master Pullet Sets, Grip Pullers sets also available
|
|
|
|
|
|
T-Handle Considerations:
The T-Handle is the best selection for applications where maximum torque is needed for insertion/extraction of screws.
Compared to a screwdriver handle, less effort is needed to generate comparable torque.
The T-Handle is capable of producing a flywheel affect for 'spinning' fasteners in or out of low friction materials.
A common misconception is that a shorter blade can generate more torque than a longer blade. In reality, blade length has no affect on torque.
Bondhus® Advantages:
The slight downward angle of the handles is ergonomically superior to a straight T-Handle for comfort and functionality.
Cushioned feel reduces fatigue.
Handle size matches blade torque to prevent over-torqueing.
The mass of a Bondhus® T-Handle enables a flywheel affect, allowing screws to be quickly spun in or out.
Bondhus® T-Handles do not have ball end tips on blades that are smaller than 5/32 inches or 4MM, since a T-Handle could easily over-torque and break these smaller size ball ends.
6", 9", and graduated blade lengths are available.
Bondhus® T-Handles are securely welded to guarantee they will never loosen or slip. Handles that are friction fit, but not welded, eventually begin to wear and loosen. When the wear becomes excessive, the blade falls out of the handle.
Custom lengths are available on special order.
Protanium® Steel
ProGuard™ dry finish
|
|
|
The hydraulic FAG extractors PowerPull SPIDER are used where higher extraction forces are required. The ten extractor sizes have a range of extraction forces from 40 to 400 kN, covering very wide range of possible applications. These devices allow rolling bearings, gears, sleeves and many other shrink fitted parts to be quickly and easily dismounted. In addition, the low mass of the extractors allows for use in any position. If necessary, greater grip depth can be achieved through the use of extra long extraction arms (available as accessories). For protection of operators, the extractors SPIDER40 to 80 have a safety grid. All larger hydraulic extractors are supplied with a transparent, very tough safety cover. The cover can be easily placed around the workpiece or tool and secured using velcro strips.
|
|
|
|
|
|
Hydraulic EasyPull
Quick and effortless bearing dismounting
The hydraulic versions of the EasyPull, TMMA 75H and TMMA 100H,
combine the user friendliness of the mechanical EasyPull with the effortless
force generation provided by integrated hydraulic spindles. The pullers are
protected from overload by safety valves built in their hydraulic spindles.
- Ready-to-use, integrated hydraulic cylinder, pump and puller - thus it is
assembly-free and it is not necessary to purchase separate parts
- Safety valve prevents spindles and pullers from being overloaded if excessive force is applied
- The spring-loaded centre point on the hydraulic spindle allows easy centring of the puller on the shaft without damaging the shaft
- The TMMA 100H has a maximum withdrawal force of 100 kN (11.2 ton US)
and a long stroke of 80 mm (3.1 in), which facilitates most dismounting jobs in just one operation
- For dismounting jobs requiring less force, SKF offers a 75 kN (8.4 ton US) version, the Hydraulic EasyPull TMMA 75H with a maximum stroke of 75 mm (3 in)
- Supplied with extension pieces and one nosepiece
|
|
Half round rasp Industry pack, unhandled, 6-342...-0
Use
For work in wood, plywood, wallboard, plastics and other soft materials.
Shape
Edges and surfaces tapered towards the point. Surfaces rasp cut, edges single cut.
Type of cut: 1 = Coarse, 2 = Medium.
Half round rasp Single pack, carded, 6-342...-2
Use
For work in wood, plywood, wallboard, plastics and other soft materials.
Shape
Edges and surfaces tapered towards the point. Surfaces rasp cut, edges single cut.
Type of cut: 1 = Coarse, 2 = Medium.
|
|
|
PFERD was established in 1799 by manufacturing files for farriers. Today PFERD-brand files, known for top quality and consistency, are used on every continent. With a wide range of standard and specialty products, PFERD provides solutions for your filing needs.
|
|
Traditional models, Phosphated, 10/31/86/87
As per DIN 3117 Form A, angle 15° (reference 10, 31) and 22.5° ( reference 86, 87) BS 6333, ISO 6787 and ASME B107.8M-1996.
Finish: Phosphated. Traditional models, where the 10 model is equipped with measuring scale and one end shaped to remove bicycle tyres etc. 31 model with measuring scale and alligator jaw. The alligator jaw is used as a pipewrench.
IP = Industrial pack.
80-series, Phosphated, 80
As per DIN 3117 Form A, angle 15°, BS 6333, ISO 6787 and ASME B107.8M-1996.
Finish: Phosphated. Precision-hardened and anti-corrosion treated.
Series P: combination of pipe grip facility, one side serrated, may be used as a pipe
wrench. Left-reading, measurement scale in mm.
IP = Industrial pack
|
|
Wrench Sets
Adjustable Wrenches
Box Wrenches
Combination Wrenches
Crowfoot Wrenches
Industrial Wrenches
Offset Slugging Wrenches
Offset Striking Wrenches
Open End Wrenches
Pipe Wrenches
Specialty Tools & Sets
Spline Double Box Wrenches
|
|
| ... products without technical information |
| |
|
|
Hand tools: Pliers, Wrenches ...
