|
|
Standard and short line for presses.
STANDARD LINE: Decoiler - Straightener - Electronic roll feed
SHORT LINE: Decoiler - Straightener/feeder unit (The ideal solution for small spaces)
|
|
|
|
|
|
Dissolved gases such as oxygen and carbon dioxide must be reduced in Boiler Feed Water in order to prevent boilers and steam circuits from corrosion. The thermo-physical deaeration process is by far the most applied technology when a reduction of oxygen to only a few parts per billion is required. While part of the BONO Group, ARTES Ingegneria is in the business of Deaerators since 1958.
The degassing process is achieved in the deaerating tower where make-up water is atomised on a set of special packing that increases the contact surface between water and steam. Oxygen and carbon dioxide are stripped by the steam flow and vented through a calibrated orifice. Deaerated water is collected in the storage tank so as to assure an adequate “Hold-up” time for the boiler downstream.
According to the design capacity and steam flow, the deaerating tower may be arranged on a vertical or horizontal geometry so that, in the latter case, a larger surface of mass and heat transfer is implemented.
Deaerators are manufactured and marketed on BONO Artes’ own proprietary design in order to assure the complete responsibility of the concerned unit.
|
|
Feed Water Deaeratores
Packaged Deaerator systems, 5,000 to 200,000 PPH. Conditions feedwater to 0% CO2 and .005cc/liter of oxygen.
imageThe HURST "OXY-MISER" deaerating boiler feedwater system eliminates the need of expensive oxygen scavenger chemicals and also offers the following advantages:
* Removes carbon dioxide as well as oxygen.
* Raises the boiler feedwater temperature, eliminating thermal shock in boilers.
* Improves overall boiler room efficiency.
* Feedwater pumps are sized for each individual application - assuring total compatibility and optimum operation.
* Vessels are ASME Code constructed for 50 psig.
* Compact design means smaller boiler room requirements.
|
|
Application : Cement, Mineral or Ore Material
Suitable for feed control
Can be adjust feed rate
Pre-assembled with heavy duty Rotor
Sub-drive through Worm Reduction Gear Box
Capacity : 3 - 10 ton per hour
|
|
1-stainless steel tank (a) fitted with a dumper door (b)
2-stainless steel channel fitted with door for cleaning
3-scratchproof grey painted steel framework fitted with four wheels, two of which are castors with a lock
4-belt blocking with cover open
On request :
2-microswitches on the cleaning door
5-fibre optics for missing pieces
6-cover shock absorber
7-safety microswitch on rear protective panel
|
|
The parts to be oriented are delivered to you in: containers, cases, boxes, loose or in bags.
You need to tip the parts into orienting hoppers which will supply the vibratory bowl feeders.
|
|
General Description: A range of vibratory and conveyor type hoppers and elevators for moving bulk product to the parts orientation stage
Technical Info:
- In-line low level hopper/elevators for large difficult to handle parts.
- Cone elevators for small difficult to handle parts. Single or Twin exit chutes
- 1, 2 and 3 cu ft open front and closed front vibratory hoppers
- Stand alone electrical cabinets and controls
- Integrated PLC control for integration into automation equipment
- Hoppers are stainless steel and can be either conveyor driven or driven by our autovibes
- Elevators are customised to suit requirements
- Custom heights and overhangs
- Stainless steel construction with belts and belt flights manufactured from FDA approved plastics
|
|
Hoists
with chains
Particularly adapted for loading iron or heavy material. They are realised according to customer specifics. By keeping a relatively low loading plan, they can lift pieces at considerable heights.
With straps
Particularly adapted for loading voluminous and light material. They are realised according to customer specifics. All hoists are prepared for the assembling of a motor vibrator, supplied on request, which allows any type of transported particulars to evacuate from the hopper. These apparatus are made out of painted iron or steel.
|
|
Optionals:
-Control switchboard.
-Level probe with electrical signal coming from proximity detector.
-Level probe with photocell.
Materials used:
-Painted steel.
-Painted steel with stainless steel hopper.
-All in stainless steel.
|
|
Part orientation objective:
Put any type of loose parts into a machine, and find them all in the same position when they come out of the machine, one behind the other.
Ideatec's expertise combined with 31 years' experience in this sector will help you to reach your part feeding and orientation objectives, using vibratory bowl feeders.
Equipement used for feeding and orientation:
- Vibratory bowl feeders
Feeder bowls : from 120 mm to 2500 mm, cylindrical, tiered, conical, steel, stainless steel, polyamide, resin
- Bladed hoppers types EL1 to EL6
- Orienting hoppers
- Orienting elevator hopper SELEFLEX type
|
|
The parts to be oriented are delivered to you in: containers, cases, boxes, loose or in bags.
You need to tip the parts into orienting hoppers which will supply the vibratory bowl feeders.
|
|
|
The unique dual-stage design ensures that the fluff is mixed with the virgin material above the extruder throat. Each auger is independently adjustable and can be set to follow the extruder screw speed by monitoring a tachometer signal from the extruder.
|
|
|
|
|
|
DIMECO offers a comprehensive range of uncoilers for coils from 50Kg to 25 tons, up to 2000mm wide.DIMECO uncoilers can afford 1,2 or even 4 coils. They are equipped with a pneumatic brake or driven.
Gifted with a particularly robust design, our machines are manufactured in mass production and can be fitted with a number of accessories, which improve stamping line productivity and enhance personnel safety (pressure arm, lateral guides...).
Our coil-car range from 1 to 25 tons makes coil handling easier.DIMECO uncoilers own dedicated features to process HLSA steels or delicate material (pre-coated, copper, mirror finished aluminium...)
The « PITSTOP » configuration allows automatic strip feeding and recoiling and offers an automatic line parameters adjustment when selecting a new job in the press terminal.
Our machines can uncoil from top or bottom, clockwise or anticlockwise and even without loop.
When combined with a DIMECO roll feeder, DIMECO uncoiler speed is automatically tuned to the press rate and to the feeder output.
|
|
Precise tension control is essential in maintaining accurate register and reducing paper waste during make- ready and production.
MEGTEC infeeds deliver maximum productivity by providing stable web tension over wide operating ranges.
MEGTEC infeeds are available as independent units or integrated into MEGTEC pasters.
Shafted and shaftless technology is available to suit all applications from book printing, newspaper printing, to high-volume offset printing.
|
|
► Power supply by vibrating bowls
► Loading crane
► Digitize system insertion for pieces
► Loading and unloading conveyor
► Manual devices to put down pieces between wheels (secured)
► Device for admission of bars
|
|
Application:
The Minster Straightener, equipped with the Production Management Control (PMC) System, is the core of the stock preparation system. In its basic form, this multi-function machine provides precise straightening of the stock, and accurate control of the storage loop. When equipped with the optional hold-down arm and peeler table, the Minster Straightener facilitates safe and efficient threading of the coil. When installed along with a complete Minster coil line, it controls and supplies hydraulic power to the thread table, reel and coil car. It also communicates via its PMC with the press and feed PMC, providing complete coil line control and diagnostics.
|
|
Feed units and systems
Vibration helical conveyor
- Universal use for small parts and connecting elements of all types
- Readiness and Conveying...
Feed and control unit ZSL151
Step conveyor
- For parts with coatings, paint finishes or delicate surfaces
- Integrated flexibly programm...
Feed- and control unit ZSU
Feed system and screwdriving process control
- compact feed system and process control in one unit
- Vibration spiral conveyor made from...
|
|
What does it do?
- Unscrambles and feeds flexible packed product coming from a discontinue production process
How does it work?
- Products in bulk are fed manually or automatically into the bulk hopper of the feeder, whereupon they are released on demand towards multiple servo-driven tracking sections. Here the products are first separated, brought into a single line, than, if necessary, turned into one direction (short side leading) and spaced evenly. From here the products can be fed directly into the packaging cell.
What can I pack?
- Potato chips and other snacks, Confectionery, Candy bars, Pet foods, Pouches, Thermoformed Products, etc.
- Bulk feeding of products to a BluePrint Automation vision-guided robotic system
- Bulk feeding of products to a flow-wrapper
- The merging of different flavored bags to a production line to create a multi/variety-pack
How productive is it?
- Unsurpassed in build and flexibility, minimal wear, and superior quality! Up to 200 PPM!
|
|
Flat bed conveyor designed for the manual and automatic loading of paper reams
Of almost as much importance as the wrapping is the product handling before the product reaches the wrapping machine and after it leaves it. There is no point in producing a Packaging machine unless it is presented in a way which is suitable for the production line layout as well as the needs of the product format.
|
|
Automated feed systems and full line integration are available with inline feeder.
FFS100
- The products on the pool conveyor are separated by linear separator and fed into infeed chain of wrapper correctly and smoothly.
FFS150
- Built-in type in-line feeder, infeed system indexes products timed to infeed chain of wrapper.
FFS1000N
- Multiple belt system controls speed of each belt according products delivery and feed them to wrapper infeed chain with high speed correctly and smoothly.
- Interface system synchronizes the speed of feeder rapidly according to the speed of wrapper.
|
|
Automated feed systems and full line integration are available with inline feeder.
FFS100
- The products on the pool conveyor are separated by linear separator and fed into infeed chain of wrapper correctly and smoothly.
FFS150
- Built-in type in-line feeder, infeed system indexes products timed to infeed chain of wrapper.
FFS1000N
- Multiple belt system controls speed of each belt according products delivery and feed them to wrapper infeed chain with high speed correctly and smoothly.
- Interface system synchronizes the speed of feeder rapidly according to the speed of wrapper.
|
|
Automatic dispenser of oxygen absorbers.
Oxygen absorbers are widely used by the industry, especially for food and pharmaceutical products. Most of the time available in bulk, they have to be placed, one by one, on the product to be preserved.
This time consuming task can be easily automated.
|
|
|
IPTE s range of component feeder systems are meeting the requirements for components that are delivered via stick packing, and in reels containing radial or axial parts. Our feeder range covers the majority of the available odd-form or "exotic" components.
|
|
|
|
|
|
MEGTEC is the world's largest suppliers of flying and match-speed pasters, splicers and reel stands in the offset printing industry with equipment operating on almost every printing press model. In 1963, MEGTEC defined modern flying paster design - two arms, independent drive and core tension control. Today the most advanced flying and match-speed paster/splicer models feature 4-quadrant drive and braking to provide optimum web tension. The results are fewer web brakes, simplest splice preparation, and low paster and splicer maintenance.
This is just one option in a range of roll and web handling products that handle speeds up to 3540 fpm (18 m/s) and web widths up to 82" (2080 mm). Integrated infeed, web steering, and automatic roll loading are available on most paster and splicer models and help increase productivity and reduce waste.
MEGTEC engineers adapt all paster, splicer and reel stand products to the specific needs of the application in printing as well as in coating, converting and publishing.
|
|
Features:
- For dispensing single sheets, folded products and brochures Product dimensions RA 250:
- Length 50 - 800 mm
- Width 50 - 250 mm
- Single sheets from 80 g/m2, magazines up to max. 3 mm
- Output: up to 60,000 cycles/hour Product dimensions RA 370:
- Length 50 - 450 mm
- Width 70 - 370 mm
- Single sheets from 80 g/m2, magazines up to max. 3 mm
- Output: up to 15,000 cycles/hour Option: Conveyor belt
|
|
|
These devices are entirely built in stainless steel AISI 304 and have been planned to contain at the same time the material which must be sent to the different utilizing points through a pneumatic suction conveying system. They have different geometric shapes in their outlets because of the different types of materials to allow the flow without the use of any mechanical stirrer. At the starting point of the conveying line there are the mixing valves air-product and of pipes cleaning.
|
|
Universal unit for automatic feeding of extruders, processing machines, hoppers and storage silos. Handles powders, pellets or granulated/flaked products with some powder content.
Large filter surface area specifically designed for powdery products.
Use as stand-alone unit or integrate into complete feeding systems.
Design characteristics
- high efficiency hose filter with reverse-jet cleaning
- filter plate/filters removed in one piece for easy product changes
- product-contacted parts of stainless steel/aluminium
- electro-pneumatically operated conical discharge valve
- level indicator installed in discharge flange
- easy access for servicing the filter elements
- pre-piped and pre-wired ready for operation
- electronic control system
- large filter surface area
- large outlet diameter
- temperature range -10 to +80°C
|
|
MANN+HUMMEL®
- Fördergeräte Baureihe FG 400
Modulare und kompakte Bauweise
Fördergutbehälter aus Aluminium-Gußlegierung oder nicht rostendem Stahl
Mit separater Gebläsestation
Abreinigung des Förderluftfilters mit Gebläse-Abluft, vor oder nach dem Fördern
Auf dem Gebläse oder auf der Förderstation angeordnetes Wechselventil
Bedienerfreundliche Mikroprozessor-Steuerung
Programmierbare Steuerungsfunktionen für:
- Fördern
- Abreinigen
- Dosieren
- Leersaugen
- Gebläse-Ausschaltverzögerung
Anzeige des aktuellen Betriebszustandes mittels LEDs
Beendigung des Fördervorganges über Zeit oder Füllstandmelder
Geräuscharmer Betrieb
Optionen:
- Füllstandmelder
- Störungsmelder
- separate Steuerung
- Zentralfilter
|
|
|
The Super Hydrobar HS is a manual barfeeder for small, and medium production runs. The diameter range is designed for camshaft controlled screw machines and Swiss-style CNC machines. The Hydrobar HS offers maximum flexibility in turning applications. The hydrodynamic support in totally enclosed guide tubes provides high performance with high reliability.
|
|
- Hydraulic type, high loading and ensures silent turning.
- Various parameter settings, alarm detection and function display.
- Employs Mitsubishi AC servomotor to transmit.
- Adopts PLC control circuit featuring excellent stability and easy operation.
- High-density steel structure ensuring rigidity and durability.
- Electronic controller synchronized tracing device,
Quick-change guide channel, easy and convenient to change.
|
|
|
|
Machine feed
