|
|
Features
3.000 m3/h per cell (standard 1 X 1).
10 models by assembly of cells: 3.000 to 30.000 m3/h.
Printing works, local painting (painting with solvents).
Filtration of gases, vapor, c.o.v.
|
|
Insulated Booths
Downdrarft Spray Booths for Truck and Large Equipment Finishing
Truck and Large Equipment spray booths are designed, engineered and manufactured to meet the needs of the transit, recreation, agriculture, construction, large equipment, and trucking industry. They are also ideal for commercial vehicles like large vans, similar to the Dodge Sprinter line of vehicles.
Global Finishing Solutions paintbooths provide a safe and efficient working environment for your finishing operation along with the latest technology.
Standard Features:
- Downdraft airflow
- Precise temperature most fuel efficient
- Air flow management
- Contamination control
- Multi-filtered air
- High production environment
- Recirculating cure or forced air cure available
- Pre-coated booth finish
- 30% more illumination
- High quality finishes
- T-8 color corrected tubes
|
|
Product Name : Automatic Spraying Machine
Features
1) When requested, the motion sequences, machine structure and workpiece size can be varied as desired.
2) An electrostatic spray gun is available to save paint (option).
3) Normal daily production rate is 20,000 pieces (based on workpiece length 300mm).
4) Employs Mitsubishi p.l.c. All control components meet the standards. Maintenance is not restricted by special components, for added convenience.
5) The drying system features double safety protections. Various overload protections are provided, protecting the machine from dangers such as insufficient running speed of motor, poor heat dissipation, and excessive temperature.
|
|
|
We can install painting lines and machines that can be considered between series systems and big machines, in that field where little workshops do not have the necessary know-how and where big firms cannot be competitive. Right to give an answer to this kind of request we have taken the advice of high professional and long experienced technicians so to put our daily qualities of fore-treatment together with the following wished painting system.
|
|
In recent years, new cycles for the preparation of painting plastic components have been developed, leading to complete systems very similar to those used to paint other materials.
A feature of these systems is the aesthetic result necessary, which requires special attention for the filtering of the air.
The car industry has given a great boost to the development of the systems. On the one hand, the use of plastic bumpers, hoods and mudguards has made paint manufacturers develop formulations capable of respecting the car specifications and, on the other hand, has led systems engineers to find solutions with automatic cycles that can ensure quality as well as extremely high production.
PROS
- Excellent finish
- Constant results
- Low cost/piece
- Possibility of changing colour
CONS
- High investment cost
|
|
|
|
|
|
Paint Mix Rooms
Dual-skin insulated and single-skin Paint Mix Rooms provide contaminant-free environments for coating preparation and mixing. White pre-coated steel and color-corrected lights allow for precise colour matching.
Multiple configurations and styles are available including models attached to dual-skin spray booths and paint booths for direct entry to spraying environment.
Pressurized downdraft airflow for ideal ventilation
- Removal of harmful fumes and vapors
- Effective removal of contaminants and dust in the mix room air
Ultra Mix Rooms feature dual-skin insulated panel construction
- Smooth fit and finish minimizes areas where dust could collect
- Insulated design reduces noise inside the booth
Concept Mix Rooms feature single-skin rolled-edge panel construction
- Smooth fit and finish minimizes areas where dust could collect
- Rolled-edge design increases panel rigidity and overall booth strength
White pre-coated galvanized steel
- White coating diffuses light better than uncoated steel, reducing reflections and glare
- Weld-free construction prevents rusting and improves booth strength
|
|
|
Pressure tanks made of galvanised steel or stainless steel are available in many sizes (1 litre - 250 litres). Due to uniform, pulsation-free material transfer from tank to gun, a first class spray pattern and a high working speed is achieved. If necessary, pressure tanks can be fitted with air-powered or electric agitators in order to achieve high hue accuracy and a homogeneous surface finish. WALTHER PILOT offers complete systems for all requirements. WALTHER PILOT manufactures pressure tanks in accordance with strict requirements of pressure equipment Directive 97/23/EC. In accordance with Directive 94/9/EC (ATEX), WALTHER PILOT has the approval for manufacturing equipment for appropriate application in areas exposed to explosion threats. Furthermore, we are certified to manufacture and approve tanks in accordance with the US-American ASME-code as well as the Chinese Safety Quality License. 10 years of delivery guarantee for spare parts.
|
|
|
Of a length from 7 to 30 meters, the Europa tunnels for industry are among most economic and quietest of the world.
|
|
Industrial Paint Booth
Paint Mixing Laboratories
Model HELIA Industrie
Vertical ventilation system specific to the type of parts being treated and part-handling method used (overhead or ground-level)
* Installation on civil engineering structure or metal base
* Heated by diesel fuel or gas, according to the process
* Multiple combination implementations
* Wide variety of sizes
|
|
Maximum Lazur
6 widths: 1500,2000,2500,3000,4000 and 5000.
2 heights: 2180 and 3120.
Protection of the operators against the effluents of painting, varnished.
|
|
Ultra
Dual-Skin Downdraft Paint Booth
The Ultra downdraft spray booth has become the standard by which all other dual-skin booths are judged, and with good reason. With literally thousands of Ultra booths in daily operation all over the world, the GFS Ultra downdraft is our most popular paint booth. Featuring our exclusive CAF Controlled Air Flow ceiling design, high-efficiency Ultra heat system, and optional equipment such as VFD's and AdvanceCure, the Ultra is the paint booth that can help your shop hit new levels of productivity, and achieve the best quality finishes.
- 12 high-efficiency 6-tube light fixtures
- 8 lights integrated into CAF Ceiling, 4 sidewall lights
- Dual-skin white pre-coated insulated panel construction
- 4-wing dual-skin insulated entry doors with drive-thru options
- Single-row exhaust pit standard, with three-row or raised basement options
|
|
|
|
|
|
Crescocito CLA 80
Automatic spray gun for fixed and robot/reciprocator installations
External design for easy cleaning and unchanged TCP when changing from other brands of guns. Gun body, cylinder housing and cylinder cap made in high grade stainless steel for extended life time.
Internal designs for retention free inter face to gun adapters and fluid nozzle. This reduced the time for cleaning and colour change. Very low usage of cleaning agents/solvents needed per cleaning compared with other brands.
Indexed air cap positions for high repeatability and accuracy.
SEAVA tested performance on guns and air caps. (www.seava.com)
Suitable for all types of paint materials, from water based to solvent and UV materials.
CLA 80 is able to handle very small paint flows when used in combination the Crescocito Pressure Regulator, CPR 08.
Materials used in CLA 80 S:
Gun body: Stainless Steel
Paint needle: Stainless Steel, Tungsten Carbide
Paint nozzle: Stainless Steel, Tungsten Carbide
Air caps: Stainless Steel, Treated aluminium
O-rings: Perflour rubber, Viton
Sealings: UHMW, Perflour rubber
Nozzle sizes: 0,5 mm - 2,7 mm
Weight: 980 gram
Part number: 217 070 050
Approvals: CE; Atex
|
|
Devilbiss GTi HD – the ultimate in spray gun technology.
Over many years the DeVilbiss GTi range of Compliant spray guns have
established themselves as firm favourites with sprayers all over the
world. As part of DeVilbiss’s continued commitment to be the world leader’s in spray gun technology, these iconic spray guns have been completely re-designed and engineered with new gun bodies,
air caps, tips, triggers and air valves.
Beneath the familiar exterior is the very latest in balanced air management and atomisation technology. These significant product developments once again provide these guns with unrivalled finishing performance and durability.
|
|
Benefiting of KREMLIN REXSON know-how and field experience since 1925, the new Xcite™ gun becomes an extension of the operator’s hand to bring him comfort and well being. Its ergonomy (design, ultra-light trigger, swivel fitting) reduces operator fatigue, increases productivity and prevents any RSI ( Repetitive Strain Injury).
New Xcite™ gun uses the highest quality components for long lasting reliable performances. Xcite™ last generation aircap brings unsurpassed finish quality with a 86% transfer efficiency.
|
|
|
M22 P HTV: The HTV gun - flat fan - (Vortex technology) is recommended for applying low viscosity materials to difficult to reach areas
|
|
Linha de Pintura - Pistol, Bicos and Capa for Airless Painting
To painting pistol airless PRO model gives Hasco, distributed peels CMV, possui quite slight anatômico format and e, sendo extremely confortável.
Possui corpo feito of forged aluminum and e projetada for trabalho com pressão of I tied 500 bar (7250 psi), podendo to be used inclusively member state aplicações of inks com high teor of solids (I tied 100%).
Bicos for painting airless gives Airlessco, model you REV-TIP, são reversíveis to facilitate to sua limpeza member state case of entupimento. Bicos you devem to be used I tied sofrerem um wears away (increase do orifice) of,002 polegadas ones.
|
|
|
Graco offers a variety of manual and automatic air spray, HVLP, airless conventional, compliant and electrostatic spray guns and systems.
|
|
|
|
|
|
Strict environmental conditions in more and more countries restrict or prohibit the use of conventional high pressure paint guns. As a result, HVLP or RP spray guns are the technology of the future. Both technologies offer significant advantages. SATA HVLP spray guns are distinguished by high transfer efficiency that save large quantities of expensive paint material. SATA RP (reduced pressure) spray guns feature optimized high pressure. Their transfer efficiency is only slightly lower than SATA HVLP spray guns and they provide an easy change from conventional high-pressure spray guns to more efficient spray guns. They conform to VOC legislation as well as convey the "high pressure feeling" to the painter.
SATA HVLP spray guns are easily recognized by the green air cap ring and SATA RP spray guns by the blue ring. It doesn't matter which technology you choose. With SATA you can be assured you have a first class tool in your hand.
With our Spray-Disc we can help you choose the right spray gun online.
|
|
Revolved gun PRI HD of DeVilbiss it new gun for thick products
PRI HD is conceived specifically for the applications of finishes, thick products or to high viscosity.
The gun is easy to maintain and clean. A broad range of 5 tubes and a hat of air ensure.
Its new design integrate several innovations of which a new valve of air, an easy control, a flexibility of the trigger and a very studied ergonomics similar to the gun GTi HD.
The new P1 hat included the last technology of Trans-Tech atomization for a total observance of the environmental regulation.
Conceived out of nickelled brass, the P1 hat is solid and robust for more longevity.
|
|
The standard features of Binks MX4/12 and MX4/32 Air Assisted Airless & Airless pumps position them as the premier choice for high speed surge free paint delivery.
Binks MX pumps are a completely new design in pump technology utilising patented magnetic detents to dramatically enhance smooth pump operation and change over with no pulse to provide the best “surge free” paint delivery for the perfect finish. These MX pumps operate at 12:1 and 32:1 ratio’s delivering 4 litres per minute output (max) with self adjusting spring loaded packings to extend the pump working life cycle and reduce the need for costly maintenance and downtime. The fluid sections and all wetted parts are constructed from the highest quality stainless steel for best fluid compatibility whilst providing a long and durable working life. MX pumps are fitted with an operator friendly control panel and include a quality easy to clean fluid filter as standard for reduced tip blockages.
|
|
|
Airmix® 20.50 Pump - Stainless Steel: Universal AIRMIX® pump, can be used with most coating materials, including high solids and water-based products.
|
|
|
AIRMIX® 10.14 - "Start Pump": For any industrial application requiring low viscosity products
|
|
|
Flowmax® 40.25F Pump - Stainless Steel: New generation Flowmax® pump for low volume applications
|
|
Líne de Pintura - Pumps Airless Painting
Ace painting pumps airless gives to Hasco são highly confiáveis, of high performance and com baixo custo of manutenção. Ace pumps foram projetadas to pump including inks com high teor of solids, I tied 100% free of reliable, sob severe ace mais condições.
Aplicações
- Naval Naval industry and construção
- Fabricação and manutenção of trens
- Offshore Industry
- Fabricação of containers
- Estrutural Aço and proteção against corrosão
- Revestimentos of tanks and tubulações
- Revestimento of proteção against fogo
- Industry of paper and celulose
|
|
|
|
|
|
With this efficient and cost effective process, the small parts to be coated are fed into the encapsulated rotating drum, as bulk material. One or alternatively two spraying automates spray the coating material uniformly onto the small mass produced parts, which roll off one from the other. These parts may consist of various plastics, elastometers, metals or wood. Either water or solvent based lacquers can be used.
ROTAMAT R 90 C
The flagship of the model range, the ROTAMAT R 90C, has got a new standard design. Encapsulation of the drum as well as various automating components increases the spectre of applications.
This premium system is perfectly adapted to individual requirements and guarantees highest flexibility and productivity. The drum can be anti-adhesion coated with PTFE and equipped with five quickly exchangeable drums (as an option). No matter whether simple, delicate or geometrically complicated parts have to be coated, parts which leave the R 90C are “ready to install”. The unique shape of the ROTAMAT spraying drum, destined for a “real” processing volume of 75 litres, the parameter-controlled angle of inclination as well as variable speeds are perfectly, computer-controlled, adapted to the rolling behaviour of the small parts. The parameters are reproducible and are, combined with the spray quantity control, the basis for optimum application of lacquer.
|
|
|
The Contractor Equipment Division provides spray equipment for contractors in the painting, roofing, texture, corrosion control and line striping markets. The Industrial/Automotive Division provides equipment in four areas of application: sealant and adhesives, process, liquid finishing and protective coatings. The Lubrication Division provides products for fast oil change facilities, service garages, fleet service centers, automobile dealerships and industrial lubrication.
|
|
|
Of a length from 7 to 30 meters, the Europa tunnels for industry are among most economic and quietest of the world.
|
|
|
The BINKS H.P. Range of Airless & Air Assisted Airless Spray outfits have been designed to provide sprayers with a very competitively priced, robust industrial assembly, able to apply a wide range of industrial coatings whilst providing the very best quality of sprayed finish.
|
|
|
|