|
|
GR-530G
Ther robot is complete of carousel with two or three arms, ideal for the painting of chairs, with a middle production of 150 pieces/hour.
The carousel provides their positioning in the frontal part for the workmanship.
The programming is effected by direct self-learning.
The simple and economic solution of the carousel avoids to the customer the construction of expensive plants of transport and besides only one operator is enough for loading and unloading of the pieces.
Also when the production doesn't foresee great series of pieces, the robot with the carousel becomes an optimal solution.
|
|
GR 630ST
Anthropomorphous Robot standard version with six degrees of liberty, suitable for painting in line, where exist air or floor conveyor systems, or in absence of handling and limited space, with the aid of an external small carousel it is possible to paint small pieces.
|
|
Kawasaki Robots K-Series
The K-Series robots are designed especially for paint applications with a reach of 1240 up to 3014 mm. Therefore it is possible to realise space-saving cells as well as big painting lines in the automotive industry.
The special wrist technology allows a media feed directly through axis 5 and 6 and minimises the contures of the robot. Therefore it is possible to access narrow and hard to reach areas.
All K-Series robots are ATEX certified.
|
|
- Fast, easy servicing
- Stainless steel ball, seat, spring and glands
- Durable insulated handle; rear entry
- Reduced trigger pressure; less operator fatigue
- Weep control version available
Performance Information
- Max. pressure: 4000 psi (280 bar)
- Max. flow: 9.0 gpm (30 lpm)
- Max. temp: 300° F (148.9° C)
- 3/8" (F) NPT inlet; 1/4" (F) NPT outlet
- Consistent weep control at 1/4 gpm (+/-15%) on "W" version
|
|
CMA was born in the 1994 and since that time it has followed an uniform growing which led it to be one of the most important Italian company for the production of anthropomorphic robots for painting.
This success is testified by the over 700 robots set up among Italy, Europe, South America, Central America, North Africa and Australia.
Thanks to a long experience in this field, CMA is able to offer suitable solutions for painting with individual automatic Robots or integrated systems and we guarantee very high quality and reliable plants and services.
The Robots are studied for each sector of application: simple but very fast models, five-axes Robots with direct self-learning programming or extremely sophisticated six-axes versions with point-to-point programming, self-learning, off line or external systems. CMA Robots are certified to be used in potentially explosive areas according to the ATEX regulations and the company is also working under ISO 9001/2000 Certification.
|
|
GR 6100
The robot GR 6100 is suitable for the painting of great pieces, of plans, of windows and doors in line.
It is a new conception model of robot, it uses all the best available technologies.
Thanks to component lubricated to life the maintenance it is really limited.
It uses motor with digital control, this allows him to get speed and precision notable.
The software is provided of a complete self-diagnostic, besides the statistic of production and, at request, a program of tele-assistance from remote.
The programming can be made with point to point or off line systems.
|
|
GR 6100SC
Version of the robot GR 6100 with the application of the Belt conveyor, ideal for the painting of kitchen doors.
|
|
The FANUC paint robot series is suitable for a wie range of painting and coating applications. They offer highest flexibility and precision to paint all sorts of materials such as plastics, metal, wood...
FANUC painting robots are ideal for many types of materials and applications:
• Automotive body (interior and exterior)
• Automotive parts
• Plastics (e.g. mobile phone)
• Wood
• Steel
• Anti-corrosion
• ... and many other
The Paint robot series is available in following models:
• PaintMate 200iA and PaintMate 200iA/5L with 5kg payload and 704mm and 892mm reach.
• P-50iA with 7.5kg payload and 1360 mm reach
• P-250iA/10S with 10kg payload and 2000 mm reach
• P-250iA/15 with 15kg payload and 2800 mm reach
|
|
|
|
|
|
PAINTING ROBOTS:
Six-axis EPX-series and PX-series “Expert Paint” robots are designed to optimize performance in industrial, automotive and aerospace coating and dispensing applications. They can be used for primer, base coat, finish coat, clear coat and spray dispensing, using water-based, solvent, powder, glaze, and glue/adhesive materials. Motoman paint robots feature a wide range of reaches (800 mm – 2900 mm) and payloads (3 kg – 20 kg). A variety of wrist types (standard, Lemma, 3-roll and hollow) are available, depending on the robot model and application.
Motoman EPX- and PX-series robots can efficiently coat intricate parts with recesses, curved surfaces, and picture frame-like shapes. Using a complex spray path, the robot can spray different areas of the part to various film thicknesses – without runs or sags.
Motoman offers a variety of fully integrated spray gun options for these different wrist types, including air spray, electrostatic and bell applications. As an option, Motoman offers a built-in (external axis) servo motor that can be used to drive gear pumps which are used for closed-loop fluid control).
All of the Motoman EPX-series and PX-series robots feature a Factory Mutual (FM) Class 1 Division 1 explosion-proof rating.
|
|
MOTOMAN offers the widest range of robotic products with the number of controlled axes ranging from 4 to 13, including application dedicated robots for welding, palletising, handling, painting and clean room applications, with payloads ranging from 3 to 600 kg.
MOTOMAN installs turnkey systems and customised manufacturing solutions with the highest level of quality.
All manipulators/robots are fully electrical controlled by servo power.
The latest control system is capable of synchronised motion & control of up to four robots or 36 axes in total.
MOTOMAN also offers service, maintenance and training.
MOTOMAN, the robotic division of Yaskawa Electric Corporation, has its European headquarters in Kalmar, Sweden and Allershausen, Germany.
Interested in knowing more? Please contact us!
|
|
From traditional application to electrostatic processes, Stäubli paint robots cover all needs for automated finishing. They operate in various industrial sectors:
-Woodplastics components for automotive industry (inside and outside),
-metal components for automotive industry (antifriction…),
-cycle industry (liquid, powder),
-wood industry,
-farming equipment,
-household appliance,
-consumer goods (TV sets, game consoles,…),
-aerospace,
-optics
MetalStäubli also presents a relevant offer for enamelling applications (plumbing and porcelain), gluing (spraying or extrusion), release agent applications…
|
|
The K Series line of painting robots was developed with our "Simple and Friendly" design concept. With eight explosion-proof models available, Kawasaki has a robot that will suit any robotic painting application from small paint cells to complete multi-robot automotive finishing systems.
The new K Series paint robots are loaded with features yet easily installed, integrated, and programmed allowing for rapid production start-ups.
|
|
The FANUC paint robot series is suitable for a wie range of painting and coating applications. They offer highest flexibility and precision to paint all sorts of materials such as plastics, metal, wood...
FANUC painting robots are ideal for many types of materials and applications:
• Automotive body (interior and exterior)
• Automotive parts
• Plastics (e.g. mobile phone)
• Wood
• Steel
• Anti-corrosion
• ... and many other
The Paint robot series is available in following models:
• PaintMate 200iA and PaintMate 200iA/5L with 5kg payload and 704mm and 892mm reach.
• P-50iA with 7.5kg payload and 1360 mm reach
• P-250iA/10S with 10kg payload and 2000 mm reach
• P-250iA/15 with 15kg payload and 2800 mm reach
|
|
|
|
|
|
Motoman EPX2900 Paint Robot
Versatile Paint Robot
The EPX2900 robot provides versatility and superior performance for standard industrial, automotive and aerospace coating and dispensing applications. It is ideal for painting automotive bodies and plastic component parts, agricultural equipment and other machinery and large parts. The high-speed EPX2900 creates a smooth, consistent finish with outstanding efficiency. It is Factory Mutual (FM) approved for Class 1, Div. 1 use in hazardous environments.
The EPX2900 robot has a 70 mm (2.76") diameter hollow wrist that facilitates mounting of spray equipment. Interference between the hose and parts/fixtures is avoided, ensuring optimum cycle time and robot reach/access. Optional devices such as 24-color change valve (CCV), flushable gear pump (FGP), flushing unit valve and master valve can be mounted on the upper arm resulting in reduced cycle time and less wasted paint.
The EPX2900 robot has a 20 kg (44.1-lb) payload capacity, 2,900 mm (114.2") reach, and ±0.5 mm (±0.02") repeatability. The EPX2900 is available in a floor-mounted configuration.
|
|
PPH 308 - Automatic bell spraying with rotating bell
The PPH 308 automatic bell atomizer use centrifugal force to ensure uniformity, deep penetration and spraying.
With their spraying fineness, transfert efficiency and ease of implementation and adjustment, the PPH spray guns guarantee both a high level of productivity and a superb quality finish.
The PPH 308, equipped with magnetic turbine has been designed for the electrostatic application of water or solvent-borne liquid paints in general industry.
Equipped with EC 65 bell specially designed for the application of high solids and metallic paints electrostatically.
|
|
|
|
|
|
COBRA 1 & 2 spray guns - are available with Trans-Tech® (Compliant & HVLP) Atomisation for optimum output and Paint Savings... Fitted with the very latest advances in EPA compliant Transfer-Technology - COBRA provides considerable paint savings whilst producing the highest levels of atomisation, high speed application with flow rates of up to 600cc/min or more. Such exceptionally efficient atomisation and material transfer ensures optimum coverage and paint usage while complying with the toughest EPA legislation.
COBRA "Advanced Conventional" - air caps outperform the rest with uniquely designed high capacity airflow and outstanding atomisation characteristics coupled with excellent product features. COBRA's Advanced Conventional Air Caps makes them the ideal guns for small operations or high volume industrial spraying. Advanced Conventional Atomisation will operate and atomise the most difficult spray materials, but will not produce the paint savings as seen with Trans-Tech Atomisation Technology.
|
|
DELTA SPRAY® XT, Air spray (atomizing with air pressure up to 7 bar).
DELTA SPRAY® AUTO HVLP (atomizing air at high volume, low pressure).
Compliant (atomizing with reduced air pressure up to 2,5 bar).
Excellent durability and high end finishing quality are the key features, whether choosing the gravity-cup, suction feed or pressured gun version.
|
|
|
These automatic guns are used e.g. for quality control to mark deficiencies. Dots with diameters of 3 to 30 mm or lines are possible. Extremely short switching time (open, spraying, close) in the range of 25 to 30 milliseconds is optimal for productions with high cycle times. Guns with flushing devices can also be ordered. A large selection of nozzle sizes: 0.3 / 0.5 / 0.8 / 1.0 / 1.2 / 1.5 mm Ø is available. WALTHER PILOT offers complete paint marking systems with pressure tanks, compressed air fittings, solenoid valves and hoses. 10 years of delivery guarantee for spare parts.
|
|
100,000 volts of FirstPass Power™ gives you the ability to coat your parts right the first time - every time. The OPTIFLEX Series improves profitability by making your operation more efficient.
The simplified user interface gives operators total control flexibility without having to worry about balancing several different settings. Quick, easy-to-learn procedures reduce training requirements with operators.
The OPTIFLEX Series decreases your down time by automating coating configurations and the OPTIFLEX's group of high-tech components are designed to save time in an XTreme Color Change Environment.
The intelligent automation and the latest powder coating technology increases transfer efficiency, reducing the amount of powder wasted.
The OPTIFLEX Series improves productivity, even in more challenging applications such as porcelain enamel.
|
|
Prodigy™ HDLV™ Automatic Gun
Automatic gun with straight through powder path, optimised for Prodigy™ dense phase spraying and quick colour change
1500mm long gun for extended reach in to the booth and perfect gun to part distance
Short version available for special applications.
Unique profile prevents powder build up on the gun
Voltage multiplier positioned at the back of the gun - so it operates outside of the booth, reducing gun flex and grounding issues.
Prodigy™ dense phase spraying uses small bore powder delivery hose - eliminating awkward hosing issues
|
|
|
|
|
|
Automatic electrostatic powder coating applicator : Auto-Mach-Jet
Auto-Mach-Jet provides coating performance, ease of cleaning, simplicity, to allow you to increase your productivity and color change even faster!
The applicator Auto-Mach-Jet easily applies all types of powders on all types of parts. Combine it with the new CRN 457 controller, and the package will allow you to better handle your coating parameters, and provide you with one of the best transfer efficiencies available on the market place.
Because of its design, Auto-Mach-Jet can easily and quickly be cleaned, using minimal compressed air to blow it clean, which allows for faster color changes, and an enhanced production throughput.
The electric and pneumatic controls are integral with the CRN 457 controller, which makes the system compact.
On its large screen, the adjustments are done following icons instructions that are easy to understand by everybody: the learning is intuitive, and the training of the operator is extremely quick
|
|
Crescocito CDA 50
Automatic spray gun, designed for use with abrasive materials spraying like engobe, glaze etc in ceramic industry.
Also suitable for other difficult materials.
The gun uses a diaphragm for closing the material flow and has very few wearing parts for low production costs.
External design for easy handlingh and quick cleaning.
Fan width control can easily be changed to external remote control.
Push in fittings for air connections.
Suitable for all types of paint materials, from water based to solvent and UV materials.
Materials used in CDA 50:
Gun body: Aluminium with hardening
Paint nozzle: Stainless Steel, Tungsten Carbide
Air caps: Treated aluminium
O-rings: Perflour rubber
Sealings: Perflour rubber
Nozzle sizes: 0,5 mm - 2,7 mm
Weight: 410 gram
Part number: 217 521 000
Approvals: CE; Atex
|
|
|
The unique Binks air assisted airless tip and air cap design is now available in a manifold automatic gun platform. Ideally suited for multi-gun finishing equipment such as rotary machines, reciprocators or fixed chain-on-edge systems located in high production environments.
|
|
|
AIRMIX spraying guarantees: excellent quality of finish, significant product savings, a precise fan width according to the angle of the nozzle chosen, the application of medium paint thicknesses and a medium speed of gun travel .
|
|
A perfect finish is obtained using PILOT WA 800 series automatic spray systems. All materials – also water paint – can be processed, since the front part is completely made of stainless steel. The automatic paint spray guns are fitted with adapter plate. This enables quick exchange of the gun for cleaning and maintenance work. The gun is available in high pressure, medium pressure and HVLP variants. Particularly high application efficiency can be attained for medium pressure and HVLP.
A large selection of nozzle sizes: 0.5 / 0.8 / 1.0 / 1.2 / 1.4 / 1.5 / 1.8 / 2.0 / 2.2 / 2.5 mm Ø. Besides the standard spray gun with internal control, models for external activation are also available. WALTHER PILOT offers complete spray systems incl. pressure tank for conveying paint, compressed air fittings, solenoid valve, and hoses. 10 years of delivery guarantee for spare parts.
|
|
It is possible to mark dots and lines using the PILOT Signier series automatic spray systems. The guns are suitable particularly for sharp-edge painting as well as for painting small parts. They are used also for the dot-marking and for the application of adhesives.
Available nozzle sizes: 0.3 / 0.5 / 0.8 / 1.0 / 1.2 / 1.5 mm Ø.
As standard, the spray guns are equipped with internal control. Models for external activation are also available. WALTHER PILOT offers complete spray systems with pressure tanks, compressed air fittings, solenoid valves, hoses. 10 years of delivery guarantee for spare parts
|
|
Preparation ans spray aeras speed line
Offer a safe environment for all preparation operations, including primer spraying, without the need to move the vehicle.
|
|
Amiral Speed dry eco plus
Curing time is halved and energy consumption cut to 50% in cold water conditions.
|
|
|
|
Painting equipment and tools
