|
|
|
|
|
|
Parker Balston® SOURCE LCMS-5000 Series is now available for Applied BioSystems MDS Sciex API-LC/MS users
The Parker Balston® SOURCE-LCMS-5000 is a visually integrated and functionally modular LC/MS gas generation system which produces high purity nitrogen, zero air and exhaust pump gases for all Applied Biosystems – MDS Sciex LC/MS/MS instruments.
It produces nitrogen, zero air and pump exhaust air by utilizing a combination of a compressor with filtration, catalysts and membrane separation technologies. An integrated low-maintenance compressed air supply is filtered by high efficiency coalescing filters removing all contaminants down to 0.01 micron. Hollow fiber membranes subsequently divide the clean air into a concentrated nitrogen stream. The zero air is produced by catalytic oxidation which converts the hydrocarbons. A passive hollow-fiber dehydration membrane is used to create the exhaust pump gas.
The integrated Scroll compressor is ‘whisper’ quite at only 48 dBA and is supplied as standard with a 10,000 hour / 3 year warranty. Low maintenance and reliable this offers the best compressor warranty currently available on the market.
Parker Balston is the worldwide leader in separation and filtration technologies, and offers a broad range of analytical gas generators to meet your specific analytical instrument requirements. All products are backed by a fully staffed field sales and service organization.
|
|
|
On request IGS Italia can design and build highly complex plants, with systems installed inside ISO containers, if so required with high-pressure cylinder filling, or else, plan and control the entire gas generation and distribution systems in the customer's facility.
|
|
CENTRALE DE REMPLISSAGE DE BOUTEILLES EN CONTAINER
ATELIERS CLEF SUR PORTE
CENTRALE DE PRODUCTION D’OXYGENE ET D’AZOTE- CRAFT®
Les centrales de la gamme CNO sont identiques à celles de la gamme CPO à la différence près qu’elles disposent d’un générateur d’oxygène et d’un générateur d’azote permettant la production alternée des deux gaz et le remplissage de cylindres via deux rampes situées de part et d’autre du container atelier.
Rappelons que l’azote est utilisé aussi bien dans le secteur médical qu’industriel (conservation des aliments, contrôle de qualité en milieu industriel et hospitalier, conservation des cellules et tissus vivants, inertage du bain de plomb sur les lignes de fabrication du verre, gonflage de pneumatiques, etc).
Container avec toiture de protection, éclairage, mesure paramagnétique de qualité de l'oxygène et de l’azote.
|
|
The IGS group is one of the world's major manufacturers of Hollow Fiber Membrane modules.Our modules are the result of an extensive effort in R&D and set new market standards both in terms of performance and efficiency.
IGS Italia is able to provide tailored solutions for any kind of application in various sectors and according to all required regulations. The plants can be supplied on skids or turnkey assembled inside ISO containers. All the component parts are selected according to environmental conditions and installation site classification; for instance, all our plants for the marine sector are designed according to IMO standards and can be certified by any classification institute.
|
|
|
|
|
|
N2 FLO, N2 PICO and N2 MAXI Series nitrogen generators are based on PSA (Pressure Swing Adsorption) technology for superbly high quality gas production. Thanks to a sophisticated microprocessor control system, these gas generators can function autonomously for 24 hours a day without having to be shut down at all. An oxygen analyser is installed as standard equipment to ensure a top quality nitrogen supply and to sound a warning buzzer in the unlikely event of a drop in purity. Claind’s high efficiency molecular sieves and the absence of maintenance give greatly reduced nitrogen generation costs compared to alternative supplies.
BENEFITS
High system efficiency
Low running and nitrogen generation costs
Continuous 24 hours/day, 365 days/year unattended operation
Easy to use thanks to single button startup and clear instructions on front panel display
Nitrogen production matches consumption thanks to stand-by mode
Minimal annual maintenance
APPLICATIONS
Food processing
Chemical industry
Thermal treatment
Electronics industry
Lab analysis (in centralised systems)
|
|
|
|
|
|
ISO 20' CONTAINERISED CYLINDER FILLING PLANT - TURN KEY
Iso 20' workshop container
The whole of the components is entirely mounted within a modified container serving as technical workshop divided in two areas with three access doors and a control board with digital display. The container is equipped with a dismountable metallic roof, an air cooling system as well as inside and outside lighting. Among other features, we may point out the special outdoor paint consisting in a primer surface treatment and finishing enamel coat .
The container represents an excellent protection against intrusions of any kind (dust, rain, thefts, and so on), it allows CPN units to be operated every door closed. Designed to be used outdoor, their ventilation system guarantees the efficiency of the whole device whatever the environment temperature and moisture conditions are.
Seemingly similar to any other 20 feet container, the CPN workshop container facilitates considerably the conveyance of the plant (pass for fork-elevator, bolt-on ISO corners). In addition to that, it can easily be loaded on an adapted trailer improving the mobility of the equipment to such a point that it can be operated from a spot to another without being taken off the trailer.
|
|
Lead free welding
With the introduction of RoHS legislation, manufacturers of electronic appliances have had to adapt their welding systems to use lead-free welding alloys. Because the new alloys require a higher fusion temperature, they are also more liable to oxidation. One way of preventing this is to direct a flow of nitrogen over the welding process. Both wave welding and reflux oven welding are affected by this phenomenon.
Solution
Claind’s basic solution for combating weld oxidation is to install a standard nitrogen generator to deliver gas of adequate purity for the welding process and a nitrogen accumulator of suitable size to cover the requirements of intermittent operations. All Claind nitrogen generators can be used in welding processes according to the plant configuration.
|
|
For a continuous production of hydrogen and oxygen based on the principle of water electrolysis.
As a default, the HySTAT TM consists of a Process Part, a Power Rack and a Control Panel along with a complete set
of interconnecting cables. Hydrogenics also offers a wide selection of optional components to meet customer specific requirements.
|
|
SKID MOUNTED CYLINDER FILLING PLANT – TURN KEY
The CFO Line presents the same specifications than containerised versions (cf. CPO Line). Note that skid mounted devices must be settled indoor in a place sufficiently ventilated. Apart from that, they only can be operated on a static basis. Due to their higher sensitiveness to their environment, the operator will have to make sure the operation area is adapted and isolated.
|
|
|
|
|
|
The modular design of the OXYSWING® Medical Oxygen Concentrators allows an unlimited flexibility in the selection and lay-out of a medical oxygen supply system. After installation the end user has even the possibility to adapt his generator to changed oxygen supply conditions by simply varying the number of PSA modules of the unit.
Certified Quality.
Also in terms of quality the OXYSWING® Medical Oxygen Concentrators offer a new dimension: besides the manufacturing to the quality standards of both ISO 9001:2000 and ISO 13485:2003, OXYSWING® Medical Oxygen Concentrators are also certified to the 93/42/CE directive for medical devices, which makes them fully suitable for any healthcare application.
Reliable, Convenient & Simple.
· Process piping, valves and air treatment of each supplied concentrator already sized for the maximum possible number of PSA modules;
· Standard process piping and valve bodies made of stainless steel;
· Components from first-class international suppliers with proven durability even under harsh operating conditions and available throughout the world;
· Standard oxygen analyzer with zirconium-oxide measuring cell:
maximum measuring reliability
no annual measuring cell renewal required
no yearly calibration required
· Optional electronic flow meter installed inside the metal cabinet;
· Optional CO2 analyzer;
· Optional telemetry for remote monitoring and control of the oxygen generator
· Robust and simple design for minimum maintenance requirements;
· No skilled personnel needed for system modification at the installation site in case of changed oxygen supply conditions
|
|
• Industrial units to produce oxygen on site by oxygen concentrator FLOXY, delivered turnkey
• Specially designed for continuous operation
• Purity, flow and pressure output stable and guaranteed.
• CE marked systems
• Several levels of concentration depending on the model chosen: 90, 93, 95, 99 and 99.5%.
• Different capacities available to meet all consumer profiles
• Many innovative options: SMS alarms, supervision by touchscreen panel and/or internet access, continuous recording, remote management, etc..
• Mobile, compact, stationary or shelter available
• Documentation according to engineering standards available upon request
• For medical applications (supply of medical gas piping systems in hospitals and clinics), please consult the product "generator / medical oxygen concentrator"
|
|
The HMXT Generator design is a refinement of the proven TITAN™ HM and HS generators. New features provide added benefits for the user. A distributed I/O system using DeviceNet Network provides flexibility, additional operational data, and reduced installation time. A modernized human machine interface (HMI) permits easy operator access, data history, and remote operation. An efficient layout helps to reduce scheduled preventive maintenance time by up to 30%. In addition, the gas delivery pressure has been increased to 10 bar.
Ultrapure Gas
Ultrapure (99.9998%), on-demand hydrogen gas delivery at useable 10 bar pressure with no additional purification required
Pressurized, ultrapure oxygen (99.999%), free of hydrocarbons and other atmospheric contaminants, with
use of auxiliary purifier
|
|
|
|
|
|
This equipment is supplies generating a clean hydrogen gas and oxygen gas by high purity without any in impurities by adoption of ion exchange membrane type water electrolysis.
Water electrolysis by using ion exchange membrane, “Electric energy to convert directly into Hydrogen and oxygen.” “Gas Generation to control safely and easily.” “Gas Generation Reactor to be simple.”
Applications
For fuel cell
For various burnings
For hydrogen water manufacture
As a hydrogen source and an oxygen source of other usages
Features
The High Pressure Gas Safety Law in Japan is not applied.
Since gas supply power is 100-300kPa, The High Pressure Gas Safety Law in Japan is not applied to it.
Only pure water is needed as material.
If there are even a power supply and pure water, supply of gas is possible anywhere.
Therefore, a worker is free from conveyance and exchange of a cylinder.
High safety
There is very few of gas staying within equipment, so the equipmewnt operation is excellent in safety.
Clean gas
The solid ion exchanged film is used for this equipment as the electrolyte for water electrolysis.Therefore, pure water electrolysis is possible, without using a strong alkaline electrolyte like conventional equipment.Antipollution measures, such as alkali waste fluid processing, are unnecessary entirely as well as clean gas being obtained by that.
Easy operation
Only by turning switchON, the gas controlled by fixed gas pressure is supplied immediately.
Maintenance-free
Since it is clean gas, there is no clogging of a pipe or a nozzle, and periodical cleaning of a troublesome electrolysis tub is also unnecessary.
|
|
SGA Series: Flag ship integrated generators
Our flagship SGA and SGC Ozone/Oxygen Systems combine air-cooled ozone generators with onboard oxygen concentrators in a compact, wall-mountable stainless steel enclosures. In addition, the SGC Series is equipped with a self-contained onboard compressor.
|
|
HiPro™ Series: High pressure soil and groundwater remediation
The HiPro Series delivers high-pressure ozone gas for in situ groundwater and soil remediation at stabilized and continuous concentrations. The patented high-pressure reactor cell delivers concentrated ozone at high pressure without secondary compression and resultant degradation. Operation and uptime are facilitated with the advanced PLC “touch-screen” control and is remote access ready.
|
|
M Series: Modular, High output ozone generators
Modular redundancy is the key to the M Series revolutionary design, providing unsurpassed reliability. The advanced chassis based design of M Series Ozone Generators is the foundation for the most powerful, high yield, air-cooled ozone generators in the world, with standard designs from 7 lbs/day to more than 50 lbs/day ozone.
|
|
G and O Series: Dependable, compact ozone production
The G Series and O Series Ozone Generators outperform other ozone generators many times their size. The reliable, versatile, and cost effective G Series Ozone Generators are built to interface with a wide range of industrial applications.
|
|
The Summit Series are complete and fully integrated ozone systems that seamlessly combine all critical elements of ozone into sanitary, splash-resistant, stainless steel packages. These skid-based systems are available for a variety of flow rates and process requirements: 5-200 gallon per minute water flow rates at 0.5-10 pounds per day ozone production.
The performance and simplicity of the Summit Series systems make them ideal platforms for countless ozone processes:
# Bottled water
# Food and beverage clean-in-place (CIP) and surface sanitation
# Food and procedure processing
# Winery tank and barrel disinfection: CIP
# Brewery bottle rinsing, CIP, and wastewater treatment
# Nutriceutical/Pharma/Biopharma high-purity process water preparation
|
|
SGC Series: Flag ship integrated generators
Our flagship SGA and SGC Ozone/Oxygen Systems combine air-cooled ozone generators with onboard oxygen concentrators in a compact, wall-mountable stainless steel enclosures. In addition, the SGC Series is equipped with a self-contained onboard compressor.
|
|
|
|
|
|
This equipment supplies high density ozone water with strong sterilizing properties.
Compared with the conventional equipments for generating ozone water based on the systems of discharge electricity or ultra violet, this equipment is highly upgraded. This equipment applies our original electrochemical cell which has been developed successfully in order to generate extremely high density ozone water efficiently as well as raise the sterilizing properties.
Further, the used ozone water resolves into harmless oxygen and water by itself, and therefore it does not pollute the environment.
Features
High density ozone water
OZWU can supply high density ozone water which the conventional system of discharge electricity does not generate
High purity ozone water
Not generating impurities due to electrysis of pure water
Only pure water is needed as material
No need of equipment for generating oxygen as well as oxygen cylinder
High safety
No need for high voltage which the system of discharge electricity needs
Not generating impurities like NOx
Not causing noise of electromagnetic waveNo leak of ozone gas due to the complete electrolysis of excess ozone generated inside the equipment by using catalyst
|
|
|
|
|
|
ADVANTAGES AND ECONOMIES:
- Conceived specifically to meet the requirements of flows and purities of the analytical instruments
- Increase in the analytical performances
- Increase in the effectiveness of the laboratory
- Reinforced Safety
- More important Economies
- Simple Installation
- Recommended by Manufacturers of Instrumentation
APPLICATION:
- Produced nitrogen high purity starting from compressed air.
- Replaces the nitrogen bottles for the following applications:
- GC-Gas Vector
- GC-FID, NPD, ECD, AED
- ICP
- ELSD
- FAKE
- LCMS
- Food of a complete laboratory to supply several analytical instruments (LCMS, ICP, EVAPORATIONS Of SAMPLES)
Principle of operation of the PSA:
Technology used to produce a nitrogen flow high purity is adsorption with swinging of pressure. This technique uses a molecular bed of sieve with coal (CMS) to selectively eliminate O2 and the other contaminants from the ambient air. Alternate bed between the modes of purification and regeneration to ensure a continuous production of nitrogen.
The gas generator is designed to receive filtered pre compressed air with 7 barg provided by a compressor without oil (provided by the laboratory or integrated in the generator). This flow of filtered and compressed air passes then in the bed of CMS which is in mode of purification. At this point in time O2, CO2, moisture and certain hydrocarbons are eliminated from the compressed air, producing a gas flow nitrogenizes clean, dry and of high purity.
|
|
|
|
|
|
The NITROSWING® Line of nitrogen generators provides the most simple and economic solution for producing nitrogen according to your needs and with desired purity:
- Inexpensiveness
You are no longer subject to supplier price increases
- Savings
No rental, filling, delivery or order management costs
- Unlimited supply
Nitrogen always available, without any risk of running out of stock
- Personalized purity
You can choose between 3% and 10 ppm of residual oxygen
- Constant and safe purity
The residual oxygen is constantly checked through a high accuracy analyzer
- Compact design and reduced dimensions
Small overall dimensions, easy transport and simple handling
- Safety
No more high-pressure cylinders storage, handling and changeover risks
- Expandability
You can increase the supply of nitrogen whenever you want by simply varying modules or banks
The features of the NITROSWING® Line:
- Components made by prestigious world manufacturers available throughout the world
- No adsorption dryer upstream of the generator to prevent wasting compressed air
- Minimum maintenance
- Zirconium cell based analyzer:
maximum reading reliability
inexhaustible
no yearly calibration required
- Electronic flow meter fitted inside cabinet
- Complete expandability without making any substantial changes to the system
- Pipes, valves and air treatment already sized for utmost extension
|
|
Atlas Copco proposes a range of 7 nitrogen generators NG offering of the nitrogen flows from 1,3 to 130 m3/h and of the rates of purity up to 99,99%.
Based on technology PSA, the principle of operation is simple and powerful. Easy to install, the NG are compact and reliable. Their modular concept makes it possible to assemble several units in parallel to adapt the production of nitrogen at the request of the process with an optimal energy efficiency. Used downstream from compressors of air and equipment of treatment of air Copco Atlas, they offer all the advantages of a comprehensive solution: quality of the components, traceability, optimal energy efficiency, services.
|
|
|
|
|
|
H Series hydrogen generation systems use PEM (Proton Exchange Membrane) water electrolysis technology to produce 99.999+% pure, pressurized hydrogen onsite at customers' sites using only water and electricity as inputs, and without a mechanical compressor.
Reliable, efficient, compact PEM cell stacks have been used to produce high-pressure oxygen and hydrogen in military and aerospace life support applications for over 20 years.
The H Series hydrogen generation systems are uniquely attractive for generator cooling and offer:
· Improved reliability of supply by eliminating the need for frequent deliveries
· Improved site security by eliminating the need for routine hydrogen delivery truck access
· Guaranteed pure, dry hydrogen meeting UHP specs - 99.999% hydrogen - free of hydrocarbons and other problem impurities
· Very low inventory improves siting flexibility and safety – essentially zero hydrogen inventory from NFPA viewpoint
· Eliminates the need to order, manage, move, count or connect cylinders to the hydrogen supply system
|
|
HySTAT™-A systems are widely used in the application for on-site generation because of the reliability of the equipment and the continuity of hydrogen supply. The cell design permits cell stack by cell stack monitoring of the generator, thereby ensuring safe operation. With installations at more than 150 power stations around the world, Hydrogenics products have provided a
safe, reliable and continuous source of hydrogen, with trouble-free operation over many decades.
|
|
The H2 MAX3 Series is designed to satisfy the needs of industry.
This series of hydrogen generators is a true ambassador for Italian innovation and technology. Claind is the only Italian manufacturer of pressure electrolysis hydrogen generators capable of conforming to the strictest CE international safety standards (ATEX, PED).
Technical specifications
Output: from 0.5 to 30 Nm3/h
Delivery pressure: 15 bar (without auxiliary compressors)
Gas purity: 99.7% without deoxo, 99.999% with deoxo
CE certified (ATEX, PED)
BENEFITS
Safety: maximum operating safety.
Purity: Oxygen levels below 0.2% O2.
APPLICATIONS
Refuelling stations for hydrogen fuelled vehicles
Energy storage systems and research into renewable energy sources like peak shaving, UPS, and completely off-grid systems.
Industrial processes like annealing, noble metal welding, cooling of nuclear and other electrical power stations, food processing and pharmaceuticals.
|
|
Claind’s range of air generators and purifiers includes pre-compressed air treatment systems and generators of purified, dried and zero impurity air.
Claind has also developed a latest generation, high efficiency catalyser for hydrocarbon removal. This advanced system is already applied to the AZ2000 Series and AG2000 Series as well as to the NG2000 and ANG2000 nitrogen generators.
|
|
PSA Technology
Integrated air compressor : noise level (< 52db)
Flow rate : 3L / min et 6L/min
Purity achieved : HCs < 0,1 ppm and water dewpoint < - 40°C
Increased safety in the lab compare to the use of high pressure cylinders
Easy to install
Hour run meter
Quick and easy servicing : needs to change filter and silencer once a year
|
|
The SC-TOC-A has been tested extensively in the field by SWAN Environmental India, authorized Shimadzu Distributor for TOC. SWAN have approved this generator model to provide gas for both, NPOC and TC-IC Applications.
The generator operates on the principle of catalytic oxidation to effectively remove hydrocarbons (as CH4) to less than 0.1 ppm while 'Pressure Swing
Adsorption' Technology reduces the moisture content of the gas.
The SC-TOC-A is the only TOC generator on the market today, featuring an internal air compressor, thus o#ering a stand- alone solution, independent from external air sources.
|
|
|
|
|
|
Zero Air
SPECIFICATIONS / BENEFITS
-Purity < 0,1 ppm CH4
-Range of flow rate : 1,5 à 30 L/min
-Quick and easy servicing : consist into changing the inlet and outlet filter once a year
-Improved analytical performance : the reduction of methane ( CH4) to less than 0.1 ppm reduces background noise and improves the base line stability.
-Increased efficiency in the laboratory
-Improved safety
-Economy
-Simple installation
APPLICATION
Produce laboratory grade purified and hydrocarbon free air from an existing in house oil free compressed air supply.
Eliminates the need for inconvenient high pressure cylinders. it is ideal for use with :
-GC-FID, NPD, FPD
-THA
ULTRA Zero Air
SPECIFICATIONS / BENEFITS
-Purity achieved : CO, HCs <0,1 ppm ; CH4, NOx, SO2, O3 < 1 ppm ; CO2 < 5-10 ppm ; Water pressure dewpoint < - 50°C
-Range of flow rate : 1,5 to 30 L/min
-needs to change the inlet and outlet filter once a year. Alarme available for the replacement of the catalyst and the NOx cartridge after three years of operation.
-Improved analytical performance
-Increased the efficiency in the laboratory
-Increased safety
-Economy plus importantes
-Easy to install
APPLICATION
Produce laboratory high quality air from an existing in house oil free compressed air supply.
Eliminates the need for inconvenient high pressure cylinders. it is ideal for use with :
-GC-FID, NPD, FPD
-THA
-GC-ATD
-Electronical nose
-Calibration of test machine
|
|
|
|
Technical gas production equipment
