|
|
| Products 121 to 150 of 304 |
Placed upstream of a cutting machine allows a single operator to measure and place a hose
without having to travel. Just set the display on the length and number of hoses to cut. Using
the push button, the operator will move the hose depending on the length programmed.
- Max Ø Capacity : 100 mm.
- Max lenght measured at pass : 99999 mm.
- Maxi number of pieces : 99
- Entry guidance.
- Working height adjustable to 800 at 1000 mm.
- Voltage : 230 volts 1 Ph.
|
|
HB, Profile bending machines – Precision bending up to 180°
Easy to operate
Particularly suitable for the tight and precise bending of round and flat bars and other profiles.
Precise bending of whole series
True to size bending of whole series possible, thanks to angular and linear stops.
High bending power
with covered needle bearing and nickel plated turn-table.
Various sizes
for various different applications.
|
|
Ratchet cable cutter
KT471 - for 400 mm² copper/aluminium
KT551 - for 500 mm² copper/aluminium
KT501 - steel cable up to diameter 60 mm
|
|
|
The cutting tools have blades made of high tensile steel. The cutting edges are designed to make the cut surface as smooth and straight as possible, with the minimum force. We have two functional cutting and stripping tools, the SCT001 (0.5-6 mm²) and the Embla (0.02-16 mm²). For stripping the insulation from power cables there is the Tor stripping tool (ø 4.5-40 mm). The Oden stripping tool (ø 4.5-40 mm) is used among other things for signal, telephone and computer cabling.
|
|
SP-01P Squeeze-Eze™ Power Pack
This tool can develop 575 lbs. of force @ 80 psi and is designed to be used
with the jaw sets listed below. The tool is small (51/2” long x 1 1/2”
diameter), lightweight (11 oz) and can be operated at air pressures of 60-
100 psi. A built in adjusting screw controls the opening of the jaw.
All power packs sold less jaws. Order jaws separate.
A foot operated model is available (SP-01PF) which includes two (2) 5 foot
air hoses and hex keys. Optional WS-2000 work station, A-202 bench
stand and 105 four way footswitch are available.
|
|
This inexpensive and rugged machine can be bolted to any solid surface. The fully welded construction ensures that it will give years of maintenance-free service. It is simple and quick to use and has all the necessary features to ensure accurate repeatability.
The bender features an eccentric quick-clamping block which locks the copper bar in place. An extension bar provides the leverage to bend the copper round a 10mm radius former. An adjustable stop can be positioned to limit the bending angle and an adjustable length stop can be set to ensure that the bend is at the correct distance from the end of the bar.
|
|
|
When developing mechanical crimping pliers we strive to obtain the highest quality and ergonomics for the tools themselves, and the best characteristics of the crimped connection. Except for the hobby tools, there is a built-in full closure system which ensures that the complete crimping procedure has been performed - a condition for ensuring a professional and high quality job.
|
|
SCISSOR-STYLE RATCHET-CONTROLLED CRIMP TOOL.
Designed to provide consistent, reliable Hex Crimp terminations to industry specifications. Made of forged steel to handle years of production usage. Dies must be purchased separately, see "Interchangeable Hex Dies" in this same section.
|
|
|
|
|
|
Premium CERTI-CRIMP and CERTI-CRIMP II Hand Tools are top-of-the-line, hand-operated tools for crimping a broad array of terminals, contacts and special wiring devices available from Tyco Electronics.
They are designed to exacting specifications to produce consistent, high-quality terminations. A potential service life of over 50,000 cycles is possible, depending on operator care.
Your Choice
There are currently seven basic styles of CERTI-CRIMP Hand Tools. The choice depends on the product being applied and/or your preferred method of application. For example, open barrel contacts typically require straight-action die movement to minimize possible rotation during crimping. Or, if your application requires crimping different sizes of terminals, you may prefer using a single tool with a combination of crimping nests, rather than two or three separate tools. Other options include insulation crimp adjustment for different insulation thicknesses, a locator for properly positioning and supporting the terminal or contact in the tool, a wire stop, and color coding and/or wire size information on the head of the tool or on the handles.
Ratchet Control
All CERTI-CRIMP Hand Tools feature the reliable ratchet control. The ratchet will not release until the handles are fully closed and the dies bottomed. This helps eliminate partial crimps.
CERTI-CRIMP Hand Tools are well suited for low production runs, prototype work, and repairs - almost any application requiring consistent, highly-reliable terminations. CERTI-CRIMP Hand Tools are designed to meet all feature requirements listed on applicable Tyco Electronics Application Specifications.
|
|
Mechanical pressing, crimping and cutting tools
Hand-operated hydraulic crimping, cutting and universal tools
Battery powered crimping, cutting and universal tools
Accessories for hydraulic tools
Hydraulic systems
Hydraulic crimping, cutting and universal heads
Hydraulic drive units
Electric and pneumatic crimping tools
Force and pressure gauge systems
|
|
After stripping, appropriate contacts or ferrules can be crimped to the cable end. Weidmüller offers a wide range of mechanical crimping tools.
The crimping results obtained with our tools correspond to international standards and regulations.
|
|
Heavy duty machine for continual use.
Available for manual operation (Model 320-000) or hydraulic operation (Model 320-100).
Includes 1m length stop for cutting accurately to length without waste.
Incorporates cutters for 4 profiles of rail, plus copper earth rail 10mm x 3mm.
Successive operations of the machine are used to punch elongated holes at each end of the rail. One hole is in line with the rail, the other hole is at right angles to the rail.
Standard hole size is 6.4mm x 12mm. Alternative punch sizes are available.
Easy replacement of punches and die.
|
|
VAS CPP - VAS CPPH
Mechanical or hydraulic cutter-punch for DIN profiles.
Clean and precision cutting whithout burrs or deformations.
Punching may be done lengthwise or crosswise.
An optional graduated rule is available to guarantee repetitive cutting at equal length if DIN profiles
|
|
Weight : 55 kg
.Hose size : up to 1 1/4" 4 SP
.Swage force : 137 tons
.Opening : Die diameter + 18 mm
.Standard die packages : 15 21 27 33 or 15 18 21 27 33 39 45
.Double speed pump
|
|
Model P16AP
Crimping range (mm) 1 10 — 45
Crimping range (inches) 1 0.39 — 1.77
Crimping force (kN) 955
Crimping force (tonnage) 95
Crimpings / hour 2 —
Max. hose size (inches) 1
Die set 3 P16
Maximum opening (mm) 4 20
Master die (D / L mm) 39 / 64
Master die (D / L inches) 1.54 / 2.51
Control manual
Motor (kW) air pressure
Motor (HP) air pressure
QC tool 14 —
Foot pedal 15 —
Control unit: integrated X
Control unit: C1 —
Control unit: C2 —
Back stop device: mechanic —
Back stop device: electric 15 —
Mirror —
Pressure control P1 16 —
Pressure control P2 16 —
AGS auto greasing 16 —
Remotic control unit —
Counter L1, L2, L3 —
ASCII signal 17 —
VS PLUS control 17 —
Length (mm) 337
Width (mm) 402
Height (mm) 271
Length (inches) 13.3
Width (inches) 15.9
Height (inches) 10.7
Weight (kg) 28
Weight (lbs) 62
|
|
Bending machine functioning on the principle of stamping.
6 standard models of bending machine allowing to curve tubes of 3/8 " to 16 ", and up to 20 " in option:
0B58 (jack 8 Tons) capacity: 3/8 " to 1 1/4 "
OB 30 (jack 12 Tons) capacity: 3/8 " to 2 "
OB 40 (jack 18 Tons) capacity: 3/8 " to 3 "
0B 50 (jack 30 Tons) capacity: 2 " to 4 "
OB 50 P (jack 30 tons) capacity: 4 " to 8 "
Super OBMP150 (jack 100 tons): 4 " to 16 " (20 " in option)
Three types of motorization: electric, pneumatic, gasoline.
Accessories available for bending until 180° for models OB 30 and OB 40
|
|
VAS CH-1 & CH-2 Modelo 9
Hydraulic benders for pressure pipes,according to DIN 24440 (seamless), DIN 24441, ASA B 36,1, DIN 2448
|
|
The Holmatro hydraulic cutter range is specially designed for heavy industrial applications and consists of different models with different blades and (cutting) features, for a wide range of industrial cutting applications.
Our mobile cutters are made of lightweight high-grade aluminium and are optimised for mobile use.
Our stationary models are specially developed for continuous use, processes whereby repeated tasks are carried out at a fixed point on a production line. The accent has been placed on durability of the tool and ergonomics for the operator.
|
|
For tubes:
Steel
Stainless
Aluminum
Copper
Maximum capacities: (in mm)
Standard ray: from 25 to 190 mm
Motorization (electric versions):
Asynchronous motor 750W - 50Hz, 400V
Three-phase current (to specify the voltage with the order).
Classify insulation IP44.
Speed of bending: 6 tr/min.
Time of bending: 2,5 seconds (1 clotheshanger with 90°)
|
|
Bending capacity
ø 42 / ø 60 / ø 90 / ø 100 / ø 120 / ø 150
Short description
- Automatic bending axis electronically controlled (CNC)
- Memory for programs
- The tube positioning and tube rotation are manually adjusted
- Ideal for tubes having normal geometric forms
- Ideal for small or large production amounts
- for shift production
- Left and right bending
|
|
|
|
|
|
TB series
Extreme Speed Double Head Tube Bender
Cost effective and high speed tube bending
The TB Series Tube Benders
Chosen for its unparalleled productivity, the TB series pipe bending machine of compression tube benders is able to make 2 bends X Multiple tubes simultaneously.
Here are some of the advantages of this Globally Patented design:
- Standard with 90° head rotation for 3D tube bending
- Stationary clamps to maintain the tube in position before pipe bending
- Arc movement of bending heads results in the highest production rates available for any tube bending machine
- Lowest setup times with quick change tooling design and re adout for length and angle settings
- Production speed: 3.8 seconds - 25.4 mm X 2t X 90°, 2 tubes at one time
TB-38
2 X 90° Rotation bending heads, with bending angles up to 110°.
This pipe bending machine's capacity up to Ø 38.1mm
Keywords
Pipe Benders,Tube Benders,Tube Bending,tubing bender,bending pipe,Pipe Bending,Bending pipe Machine,Tube Bending Machine,Pipe Bending Machine,tube cutting,metal saw,Circular Saw,Sawing Machine,tube cutter,pipe cutting,pipe cutter,circular sawing machines,Saw blades,chamfering machine,deburring machine
(Pipe Benders - Tube Benders - Tube Bending - Pipe Bending - Bending Machine - Tube Bending Machine - Pipe Bending Machine - Circular Saw - Sawing Machine - Cutting Machine - Deburring - Tube End Finishing, Bender Tube, bender Pipe, Cutting, Chamfering Machines, Deburring Machines, CNC Tube and Bar Machining Center, HSS saw Blade )
|
|
Model-52
Manual stationary bending machine
Orient
Mandrel and without mandrel
bending of tubes and profiles by winding method.
Abilities
- Tube profile changing control in bending place
- 2 axes control (A;L;)
- Bending of M- type parts
- Absense of clash between machine
and tube during complex bending
- Individual tool specification
|
|
|
This bench shearing machine cuts plastic covers and raceways up to 125 mm wide perfectly without burring.
|
|
|
|
|
|
5B – The Powerful Pipe Bending Machines
CNC Proportional Servo Tube Bending
5 controlled axes with max. Ø127mm capacity pipe bender
With models that extend up to Ø127 mm capacity, the SOCO CNC 5B series tube bender ( Pipe Benders ) brings the optimal tube bending power and accuracy solutions for the automotive, trucking, buses, boiler, ship building and other heavy industries.
SB - 130 x 5B - 1S
CNC tube bender with capacity up to Ø127mm. Equipped with 5 individually programmable axes and 1 stack of tooling
5 servo electric / proportional servo controlled axes pipe bending machine
+ Feeding ( Y )
+ Planning ( B )
+ Tube Bending ( C )
+ Horizontal Movement ( X1 and X2 )
+ Pressure Die Assist ( V1 )
Keywords
Pipe Benders,Tube Benders,Tube Bending,tubing bender,bending pipe,Pipe Bending,Bending pipe Machine,Tube Bending Machine,Pipe Bending Machine,tube cutting,metal saw,Circular Saw,Sawing Machine,tube cutter,pipe cutting,pipe cutter,circular sawing machines,Saw blades,chamfering machine,deburring machine
(Pipe Benders - Tube Benders - Tube Bending - Pipe Bending - Bending Machine - Tube Bending Machines - Pipe Bending Machines - Circular Saw - Sawing Machines - Cutting Machines - Deburring - Tube End Finishing, Bender Tube, bender Pipe, Cutting, Chamfering Machines, Deburring Machines, CNC Tube and Bar Machining Center, HSS saw Blades )
|
|
Bending machine 3D (3 axes) functioning according to the principle of rolling up for round, square tubes, rectangular and profiled out of carbon steel or stainless, copper, alloy of aluminum, etc...
Capacity of standard bending on round tube steel: from 2 to 76.1 mm (76.1 X 6.3 mm)
Angle of bending: of 0° with 180°
Standard length of the arm carry-chuck 3 Mr. Any higher length on request, according to length of the tube to be curved.
Motorization: electrohydraulic group of 7.5 kw
In the initial version, the chucking devices are actuated manually. In option, a hydraulic control is proposed.
Numerical visualization of the angle of bending, the angle of orientation of the plan of bending and the longitudinal position of the tube on the bench.
|
|
|
|
|
|
SOCO V Series Pipe Benders ( Tube Bending machines )
Draw + Roll + 1D Tube Bending in 1 tube bender
The SOCO V series CNC tube benders combine Draw bending, Roll bending and 1D pipe bending technology. This combination allows 2 different fixed radiuses and multiple large roll bending radiuses in a single part, as well as a programmable carriage boost for CLR = 1D Bending.
This pipe bender coupled with Individual Pressure Die Systems assist in each draw bending stack, this tube bending machine brings superior pipe bending performance and flexibility.
Pipe Bending Machine Features
• Tube bending with SOCO’s unique DGT technology
• Rack pinion feeding
• SOCO Proprietary pipe bending operation software
• Multi-stacks for Draw and Roll (Large Radius) bending
• Programmable Boosting Force for 1D pipe Bending (*)
• Ability to bend parts with “0” straight lengths
• Programmable arc lengths for large radiuses
• Roll Bending Springback compensation settings
• Special bending compensation and data storage fields
• Low noise level with highest transmission performance
(*) in accordance to material’s elongation ratio
Draw + Roll +1D Bending
The technology can create a part which has multiple draw bending radiuses (R1 & R2 ), while creating a larger radiuses through the roll bending process. Coupled with a settable carriage booster, it allows pipe bending radiuses as small as 1 X OD.
Tags:
Pipe Benders,Tube Benders,Tube Bending,tubing bender,bending pipe,Pipe Bending,Bending pipe Machine,Tube Bending Machine,Pipe Bending Machine,tube cutting,metal saw,Circular Saw,Sawing Machine,tube cutter,pipe cutting,pipe cutter,circular sawing machines
|
|
Schleuniger is THE specialist for stripping wires and cables of all kind. The family of CoaxStrip machines represents more than 20 years of experience in multiple layer stripping with unmatched precision. Processing of coaxial cable, triaxial cable or shielded cable with an inner diameter as small as 0.07 mm (0.003'') or AWG 42 up to 15 mm (0.59'') outer diameter.
All CoaxStrip machines are fully programmable and offer a great variety of additional functions such as way-back or PC software Iguana for wire list management. Up to 9 individually programmable stripping steps can be conducted on one wire end.
Schleuniger also offers automatic solutions for cutting & stripping coaxial or shielded cables. Other stripping machines for discrete wire, single conductor wire, flat ribbon cable, multi-core cable and Glass Optical Fiber (GOF) cable are also available from Schleuniger.
|
|
|
|
Tools for Pipes, Tubes, Cables
