|
|
| Products 151 to 180 of 304 |
|
|
|
|
NYLON PLUGS from 0.5" (12mm) through to 6" (150mm)
Pipestoppers™ Nylon plugs are used internationally as the standard 'Drain Plugs' for testing leak tightness of foul water lines at the time of installation.
Furthermore, the range of sizes make these plugs ideal for a number of other applications in the water and gas industries as well as applications in all other industries where pipes are used or where there are holes to be blocked.
Testing and sealing of all pipes, pipe joints and pipe work assemblies can be done with the Pipestoppers plugs. They can be supplied with a hollow shaft version for screwing on standard hose connections or for using our own fixed nipple caps or the free nipple and cap assemblies that we manufacture.
Or for the smaller sizes, they can be supplied with solid shafts for greater pressure testing capabilities.
Other applications include: Sealing holes in castings, tanks, other assemblies for spraying and blasting to protect the insides. Maintenance and installation of swimming pool and water spa pipework.
Nylon 6 is an engineered polymer which is resistant to salt water corrosion it is also resistant to many other chemicals. Along with natural rubber rings they provide a high quality leak tight seal in the selected orifice.
There are two types:
- A solid shaft version with five sizes from 0.5" (12mm) up to 1.5" (38mm) and
- A hollow shaft version with eleven sizes from 0.5" to 6" inclusive.
All plugs have:
A central spindle/shaft on which two plates are fitted with a natural rubber tyre (ring) between them, a wing nut on the shaft moving the two plates together compressing the tire and making the seal in the pipe or orifice. Natural rubber tyres which can be substituted for different rubbers where additional chemical and/or heat resistance is required. Alternative rubber rings options are: Silicone, Nitrile & Viton)
The hollow shaft version with sizes from 0.5 inch to 6 inches allows:
Water or gas to be injected or drained as required.
Sizes of 1.5 inch and above are threaded with a half inch BSP for the connection of standard nuts/hose fittings is provided with a solid end cap seal are fully demountable for cleaning and parts replacement.
Optional end caps are available with fixed nipples/nozzles for hose connection or free nipples which can rotate when heavier hoses are used.
|
|
Hose size : 2" 4 SP and 6" industrial
. Swage force : 320 tons
. Opening : Die diameter + 55 mm
. Opening without dies : 260 mm
. Maximum crimp diameter 230 mm
. Motor : 5,5kW / 230-400V 3ph
|
|
For diameter ranging from 5 to 121 mm
TECHNICAL DATA :
*Basic jaws : diameter 19 to 121 mm
*Add. jaws: diameter 5 to 107 mm
*Thickness : 0.5 to 15 mm
*Weight : 56 Kg
*4 concentric stainless steel clamping jaws very close to the blade.
*Different motors available : 220V, 110V, pneumatic
- FD29: 90 to 270 rpm: up to 7 mm in thickness
- FD25: 30 to 90 rpm: up to 15 mm in thickness
- MOPD: 10 to 120 rpm: up to 15 mm in thickness
Easy upgrade to orbital welding
|
|
Diameters from152.4 mm to 273 mm
Thickness : from 25 mm to 40 mm
Weight : 80 Kg
Electric motor, pneumatic motor,Hydrau
Tools :
Cut
External bevel
Options :
Outils spéciaux
Suivi de profil
Groupe hydraulique
|
|
GBC pipe cutting machines orbital bench type are the fast & easy solution for cut off any pipe material (Fe, alloys, stainless steel).
Driven by a powerful electric motor, with variable rpm, easy handle all tube diameters & wall thickness thanks to its special shaped vice locking pads.
GBC orbital pipe cutters can perform clean square cut, burr free, ready for welding.
Available automatic electric rotation on bigger sizes.
- GBC PIPE 2 range 6-60mm (1/4"-2")
- GBC PIPE 4 range 13-120mm (1/2"-4 1/2")
- GBC PIPE 8 range 80-230mm (3"-8")
- GBC PIPE 12 range 210-326mm (8"-12")
|
|
A CUT ABOVE THE REST
Tube cutting and beveling machine type TF
The TF series has been designed to
cut and bevel tubes from Æ5 mm up
to Æ168 mm OD in one
simultaneous operation with the
same clamping jaws, and no specific
setting within its range of machining.
The tool holder plate features a
50 mm stroke carriage for cutting
and a second one for beveling.
Ideal for cutting and beveling prior to
welding (manual or automatic)
carbon steel, stainless, alloys, etc…
Easy to use, quality of machining,
reduced dimensions are also some
of the key features of this tool.
|
|
LEFON Orbital Pipe/ Tube Cutting Machine(orbital saw),is ideal for cutting Stainless Steel pipe. Be able to do cutting and beveling at same time. Four models available, R4,R6,R8 and R12.
R4, working range: pipe OD:1/2"-4", pipe wall thickness: 1 - 7mm,
MSRP US$3999
R6, working range: pipe OD 3"-6", pipe wall thickness: 2 -10mm,
MSRP US$4999
R8, working range: pipe OD 6"-8", pipe wall thickness: 2 -10mm,
MSRP US$6499
R12, working range: pipe OD 8"-12", pipe wall thickness: 2 - 10mm
MSRP US$7899
Applicable to the following material:
* Alloy Steel Pipe (e.g. stainless steel)
* Carbon Steel Pipe
* Non-ferrous Metal Pipe
* Plastic Pipe
* Casting Iron Pipe
* Highly reliable, long working life
Key advantage of this orbital cutting machine:
* Burr-free
* Multi-point clamping to eliminate pipe deformation
* Easy to operate
* Precise square cutting
* Cutting and Beveling simultaneously
* Highly reliable, long working life
|
|
|
Edge-planing machine of tube of 20 mm to 780 Misters. Advance manual or equipped with an automatic feed. This simple machine of utilsation, and rapid ensures you one qualitée of machining irréprochable.
|
|
Inside clamping beveling machine PROTEM US 150
The Protem US150 is a heavy duty portable pipe beveling tool designed for high quality portable bevelling, facing and machining on pipe and tube from 5.9’’ ID to 20’’ OD (150 to 508 mm). Each standard tool plate accepts multiple tool bits allowing up to four simulta-neous machining operations. Such opera-tions may include bevelling and OD.
The US150 features a self-accepting torque system and an integral dual right angle pneu-matic drive.The robust US150 is capable of performing repeatable high quality weld preparations on all machinable alloy pipes including stainless steel, duplex, superdu-plex, inconel, etc.
CONTACT AND INFORMATION
PROTEM SAS
ZI LES BOSSES
F-26800 ETOILE SUR RHONE
FRANCE
Tel +33 4 75574141
email : n.reicher@protem.fr
|
|
Chamfering machine PB 80
The PB 80 is the ideal partner for automatic and manual bar loaders. The PB 80 offers an economical solution for bar end preparation. The PB 80 can be used as a chamfering machine, a centering machine and a turning machine.
Specifications PB 80
30° Chamfering
ø 8-80 mm
Turning
ø 10-60 mm
40 max. length
Centering
ø 8-80 mm
Motor
0.9 / 1.65 kw
Drive
2 x 2 speeds
Speed 1
230 / 460 t/min
Speed 2
700 / 1400 t/min
Chuck
3 jaws
4 jaws option
|
|
|
|
|
|
Pipe Cutting and Beveling Machines with automatic feed module AVM.
A new highlight in the GF-Series of Orbitalum Tools!
The new GF machine for cutting and beveling of high, low and unalloyed metal pipes has demonstrated convincing operational results with large pipe diameters and safe and ergonomic serviceability.
A strong machine for demanding applications!
Advantages:
• For cutting pipes with ODs between 283 - 508 mm (11.14 - 20 inch) and pipe wall thicknesses of up to 15 mm (0.59 inch)
• Right-angled cutting without misalignment
• Burr-free and cold operating process
• Unique automatic process by the AVM feed module thus ensuring constant cutting
• Including a height-adjustable and robust lifting bench with a container for swarf collection
• The ergonomically designed handle enables a safer operating position; and cutting elbows is made possible without any further adjustments
• Multifunctional wrench for all setups on the machine
• Sturdy design with powerful drive
• High rotational moment for optimal cutting and beveling processes
• Optimal speed range of 50 - 163 rpm, ideal for cutting high-performance materials (Hastelloy, P91, etc.)
• Plug connection with quick-action coupling: for easy and comfortable replacement of the power cable.
• Optimized saw blade guard protects the user against flying chips
Your benefits:
• Reduced tooling and production costs
• An even higher operating life of the tools is guaranteed by the continual cooling system (available as special accessory)
• High operating efficiency
|
|
|
|
|
|
Having set the benchmark for pipe cutting and beveling machines for over 40 years, our new range of machines takes us even further forward. The new GF 4, GF 4 AVM, GF 4 MVM are now available!
Your benefits:
- Square, burr-free and deformation-free pipe end
- cold machining process, cutting in seconds
- Simultaneous or seperate cutting and beveling
- Cost-effective, increasing productivity
- Even longer tool life
What´s new?
- Optional feed module AVM or MVM for an automated or manual cutting process
- Locking mechanism prevents unauthorized usage and theft
- Weight reduction for ease of movement
- A new ergonomically-designed motor handle for a safer and more comfortable operating position, which also enables easier cutting of elbows
- Integrated laser pointer to determine the cut-off point
- 2 position aluminum clamping jaws to reduce chatter and enable smaller length of pipe to be machined
- 1 multifunctional tool for all adjustments on the machine
- Extended speed range (65-125 rpm), ideal for the cutting of high-perfomance materials (Haselloy, P91, etc.)
- Swivel cable with a quick-disconnect coupler for easy and quick replacement of power cables
- The new saw blade guard protects against flying chips and comes with a measuring port
|
|
|
Our original product and now an industry standard, the D.L. Ricci Corp. Clamshells are the best pipe cutting and pipe beveling machines on the market today. From the mini to the HD our severing and beveling clamshells have patented bearing technology and are easy to setup and operate.
|
|
|
|
|
|
Portable Tube Saws
Tube cutting made easy!
Cutting thin-walled stainless-steel tubes and elbows using the superior «planetary cutting technology».
Deformation-free clamping system by integrated clamping jaws made from hardened aluminum-cast for different tube diameters.
Advantages:
• Lightweight and easily transportable machine (only 23 kg/26 kg) to provide flexibility for on-site applications
• Deformation-free clamping of thin-walled tubes
• For cutting of thin-walled tubes and elbows
• Cutting of stainless steel tubes with a OD < 120 mm/4.7" (PS 4.5) or a OD of < 170 mm/6.7" (PS 6.6)
• No rework necessary because of a burr-free and square cut
• Cold cutting process prevents corrosion
• NEW: Integrated laser pointer to determine the cut off point
• Orbital cutting process saves time
• Multipoint clamping system of tubes
• Fast adjustment of tube dimensions
• NEW: Now available with press fitting blade/bevel combination cutters
Your benefits:
• Square, burr-free and deformation-free pipe end
• Cold machining process
• Cutting in seconds
• Increased productivity
• Increased service life of tools
|
|
LEFON Stainless Pipe Cutting Saw / orbital saw, ideal for cutting Stainless Steel Pipe / Tube . Four model available, R4,R6,R8 and R12
R4, working range: pipe OD:1/2"-4", pipe wall thickness: 1 - 7mm,
MSRP US$3999
R6, working range: pipe OD 3"-6", pipe wall thickness: 2 -10mm,
MSRP US$4999
R8, working range: pipe OD 6"-8", pipe wall thickness: 2 -10mm,
MSRP US$6499
R12, working range: pipe OD 8"-12", pipe wall thickness: 2 - 10mm
MSRP US$7899
Key advantage of this orbital cutting machine:
* Burr-free
* Multipoint clamping to eliminate pipe deformation
* Easy to operate
* Precise square cutting
* Cutting and Beveling simultaneously
* Highly reliable, long working life
Applicable to the following material:
* Alloy Steel Pipe (e.g. stainless steel)
* Carbon Steel Pipe
* Non-ferrous Metal Pipe
* Plastic Pipe
* Casting Iron Pipe
* Highly reliable, long working life
|
|
|
Frontal mill cutter for thin walls is portable, thoughtlessly and easy to use; ideal when you is operate in miniature spaces or in workmanships on the field. Different models allows to operate with canals of express diameter among 3 and 63 mm. Ideals for the automatic orbital welding.
|
|
LEFON SquareDevil, the portable tube squaring machine is specially designed to flatten and bevel tube end, making it burr-free, and perfect straight to the axis of the tube. After facing, the tube would be ready for orbital welding or other tube fabrication, ideal for high purity / high sanitary industry use, such as Beverage, Dairy, Pharmaceutics, Water treatment, Food, Semi-conductor industry etc.
Key Feature:
* Faces and Bevel most metals including stainless steel, nickel and carbon steels, , chrome, copper-nickel alloy, aluminum
* Wide range of collets (clamp)/ OD Mounting Saddles available, to avoid any tube distortion
* Three SquareDevil model available, to work on tube from 1/8" OD to 4 1/2" OD
* High quality collets made from stainless steel rather than aluminum
* Can face and bevel tube wall thickness up to 10mm
* 120/220 V powerful Metabo electrical motor
* Micro feed system
* Supply full range of bevel and squaring Bit
|
|
|
|
|
|
The new GTB2T is the first of our "Next Generation" of end prep tools. Simple to set-up and operate, this ID mounted end prep machine delivers exacting surface finishes on pipe end-preps, valves, flanges, fittings and more.
Dependable and rugged, our BU Facer series make flange facing easy and inexpensive. These large diameter machines can be used to re-face all size flanges ranging from 10" to 110" OD. These industry proven facing machines are capable of tube sheet and flange facing in minimum setup time. The time tested solid ring design and interchangeable drive system provide a rigid machine capable of holding tight tolerances and creating excellent surface finishes
The 314 Beveler was created for quick set-ups and weld end preparations on pipe and tube diameters form 3" to 14" OD. Reliable and torque-free operation is accomplished with an automatic three jaw locking system that automatically centers the pipe beveling machine to the bore of the piping to be machined. Using the automatic chuck system, installation of the mandrel can be accomplished in less than one minute. The 314 pipe beveling machines also have an optional miter mandrel system for mounting in valves, fittings and short perch applications. The cutting head of the 314 Beveler is made of 4140 steel for rigidity and long life. The 3 cutting tool slots accept all configurations of high-speed form tool blades for versatile operation. The 314 Beveler is capable of form tool beveling, facing and ID counter-boring in one operation.
|
|
Drain Test Plug Kit
The drain test kit contains the most popular sizes of drain plugs and accessories. These are all sorted in a robust ABS plastic case.
The kit includes:
Hollow shaft plugs, 2 of each - 2.5", 3", 4", 5" & 6"
4 x 0.5" BSP nipple caps
4 x 0.5" BSP swivel nut and hose tail
|
|
|
|
|
|
Following the successful introduction of the Pipestoppers™ Plumbing Kits in other industries, the Company has developed a plumbing kit for the leak testing and stopping of pipe work and nozzles used in the Pool and Spa industry.
The kit comprises the small sizes used for isolating spa nozzles and the larger sizes for the recirculation pipe work for filtration, flushing and heating.
Sizes range from 0.5” to 4.0” to cover the common sizes of nozzle and pipe work in use however the kits can be modified and adjusted to contain the 4.5”, 5”, 5.5” and 6” sizes as well if needed.
HFT Pipestoppers™ division manufactures nylon plugs for hole, tube and pipe sizes from ½ to 6” .
Nylon 6 as used for the plugs and the natural rubber rings are resistant to Salt Water, Chlorinated water and Ultra Violet radiation so they are suitable for use in a wide range of environments.
They are lighter, lower in cost and much less likely to jam then the brass plug predecessor that was commonly used before.
For applications where stoppers need to be inserted into a small diameter hole in order to seal a large space behind, the Company also manufactures inflatable stoppers for diameters from 2 to 72”.
|
|
Pipestoppers™ Commercial Plug Test Kit
For leak testing the commercial vehicle components with the large ports, a separate Pipestoppers™ kit is available with large size plugs.
The commercial kit comprises the following items:
Hollow shaft plugs - 2 of each; 2.5", 3", 4", 5" and 6"
also included are 4 x 0.5" BSP nipple caps and 4 x 0.5" BSP swivel nuts and hose tail. Plus the rigid ABS plastic storage case with special cut to size foam.
These plugs all have hollow shafts with 0.5" BSP threads for the connection of an air hose.
|
|
Domestic Plumbers Plug Kit
The plumbers test kit contains the most popular sizes of test plugs and accessories. These are all stored in a robust ABS plastic case.
This kit includes:
Solid Shaft Plugs - 2 of each: 0.5", 0.75", 1", 1.25" & 1.5"
Hollow Stem Plugs - 2 of each: 0.5", 0.75", 1", & 1.25"
Hollow Shaft Plugs - 2 of each 1.5" & 2"
4 x 0.5" BSP Nipple Caps
4 x 0.5" BSP Swivel Nut & Hose Tail
|
|
PRE-ASSEMBLING: 6 > 42x4 mm
37° FLARING: 6 > 42x4 mm
CUTTING: MAX Ø 100 mm
BENDING: 6 > 42x4 mm
DEBURRING: MAX Ø 42x4 mm
MATERIALS: AISI 316 TI - ST 37.4
DIMENSIONS L x D x H: 830 x 1260 x 1210 mm
WEIGHT: 262 KG
STANDARD VOLTAGE: 230V 50Hz 1PH
MOTOR POWER: 4.6 KW MAX
CONTROL BOARD: included
OIL: included
COMPRESSED AIR: 220 L/MIN.
TOOLS HOLDER: OPTIONAL
37° FLARING BLOCK: OPTIONAL
|
|
VAS M 16-63
For metric threadng DIN/EN 60423 of electrical conduit pipes up to M&·. Also valid for gas pipe threading (DIN 2999/BSPT or NPT) up to 2" (dies are required). Ligth and compact, weighing only 46 Kg.
Efficient cutting, reaming and threading operations.
Universal single-phase 680 W motor, insulated according to VDE/EEC standards
40 RPM without load and 27 RPM with load. Easily replaceable brushes. Automatic and adjustable lubrication inside the ratchet threader, directly over the dies. Self-locking jaws, whitch are easily replaceable.
The threading machine M63 includes: automatic ratchet theader, 2 set of dies (M16-40 and M40-63) 3 legs, 1 cutting oil container, and a set of assembly tools.
Size: 590x375x395 mm.
|
|
Threading
* Dependable heavy duty machines for maximum up-time, superior quality threads and minimal threading time.
* Industry’s widest selection of hand and power threading equipment.
* Manual “hammer” type chuck and “auto-chuck” models.
|
|
ITACA
Reliable and strong this crimping machine made of cast iron guarantees the same crimping quality during the time. Easy to adjust thanks to the translation of punching unit. The knives blocks are fitted with change rapid and magnet in order to avoid the fall of knives. ITACA is easy to use and versatile.
|
|
GAMMA
Placed in the range of machines with good features and limited costs. Designed with experience of ITACA but completely pneumatic. She is strong and lasting. Works with the same tools as the machines of Itaca series.
Supply
Supply:Pneumatic
Positioning
Magnetic support of knives-Number of tools according to the height of profile and to the number of corners.
Facilities
Reading on the special scale of positioning value. Bracing clamp disapears from the working table
Operation Quality
Simultaneous stroke of crimping heads. Double-acting stroke of bracing clamp Vertical clamp(s) of frame.
|
|
ITACA PLUS
The digital reading of both: crimping heads and the fork of reference makes it different from the other models. The regulations are easy thanks to the digital reading on the display.
|
|
SPECIALITY TOOLS FOR ALL INDUSTRIES-AUTOMOTIVE, AEROSPACE, MARINE
Simonds is the innovator in pneumatic production tools. Simonds standard line of tools is augmented by special tools made to the specific need of your production line. Automotive hinge pin tools, Oteker® clamp tools, and harness crimping tools are only a small example of special tools designed and manufactured to solve an opportunity on the production line.
|
|
|
|
Tools for Pipes, Tubes, Cables
