|
|
| Products 211 to 240 of 304 |
Intermediate to high volume rates, up to
600 assemblies per hour
l Flexible platform accommodates one or
two insertion modules as well as
secondary application modules
l Version to handle in-line, radial, and
linear/angularly opposed cavities
l Programmable linear slide and rotary table
l Easy programming through keypad
display
l Palletized fixture system for greater
efficiency and production rates
l Microprocessor controlled
|
|
Type FK50 / FK60 mandrel bending machines are used to bend tubes with narrow radii.
These machines have a compact, freestanding bending head and offer the maximum degree of latitude in bending. These machines are very well designed and solidly constructed, guaranteeing high availability and optimum bending quality. Short set-up times and high-performance drives guarantee high profitability for both one-off and mass production items. The machines also have an outstanding price/performance ratio.
|
|
BENDING: 6 > 42x4 mm
MATERIALS: AISI 316 TI - ST 37.4
DIMENSIONS L x D x H: 680 x 880 x 910 mm
WEIGHT: 100 KG
STANDARD VOLTAGE: 400V 50Hz 3PH
MOTOR POWER: 1.1 KW
CONTROL BOARD: included
ELECTRICAL LIMIT SWITCH: included
OIL: included
|
|
New REINFORCED version for tubes up to dia. 76 x 2mm stainless steel
Electronically programmable machines for bending tube and profiles with very tight radii: from 1.5 to 2.5 times the tube outside diameter [the bend radius depends on tube outside diameter, wall thickness, and material]. Designed to meet the needs of users who require the maximum possible bend quality combined with very tight bend radii, ideal for medium-lowproduction volumes. Ease of use, flexibility, and rapid tooling change mean that the initial investment can be quickly recouped.
Typical applications: construction of stainless steel handrails for stairs, bullbars, roll-bars, special exhaust pipes, lamps, pipes for the air conditioning sector.
|
|
|
Axxair develops and produces orbital bevelling machine which are going from GA120 to GA320 range. Most of the machines are evolutives into orbital cutting and welding machines.
|
|
SPECIAL BEVELING MACHINE.
This machine was developed for the offshore.
For more information, please contact us
|
|
PROTEM Beveling machine with automatic clamping
type US25CA
The US25CA portable pipe beveling tool is designed for high quality beveling, facing and machining on pipe and tube from 25 mm ID to 88.9 mm OD. The main plus of this ma-chine is its clamping system into the tube by simply acting on a pneumatic on/off distribu-tor which allows a clamping in 2 seconds only. The standard tool plate will accept up to 4 tool bits allowing to face, bevel and coun-terbore simultaneously. Once pre-set for large series or repetitive work, the US25CA is capable of performing repeatable high quality weld preparations on all machinable alloy pipes including stainless steel…
CONTACT AND INFORMATION :
PROTEM SAS
ZI LES BOSSES
F-26800 ETOILE SUR RHONE
FRANCE
Tel +33 4 75574141
email: n.reicher@protem.fr
|
|
PBM-24 Technical specifications
Clamping range : 215 - 620 mm. (8" - 24")
Turning range : 170 - 620 mm.
Motor : 400V. - 3 ph. - 15 kW
Clamping : Prism clamp - electric
Machining : carbide inserts
Max. wall thickness : 45 mm. in one pass
Feed : electric
Feed travel : 100 mm.
Turning speed : 25, 38 and 50 rpm
Measurements : 3000 x 2300 x 1800 mm.
Weight : 13000 kg.
|
|
PBM-6 Technical specifications
Clamping range : 46 - 180 mm (1,5" - 6")
Turning range : 30 - 180 mm
Motor : 400V - 3 ph. - 4,5 / 5,5 kW
Clamping : prism clamping, manual
Machining : carbide inserts
Max. wall thickness : 25 mm. in one pass
Feed : manual
Feed travel : 100 mm.
Turning speed : 48 and 96 rpm
measurements : 1300 x 900 x 1450 mm.
Weight : 1250 kg.
|
|
PBM-30 Technical specifications
Clamping range : 215 - 780 mm. (8" - 30")
Turning range : 215 -780 mm.
Motor : 400V. - 3 ph. - 18,5 kW
Clamping : Prism clamp - electric
Machining : carbide inserts
Max. wall thickness : 45 mm. in one pass
Feed : electric
Feed travel : 100 mm.
Turning speed : 20, 40 and 70 rpm
Measurements : 3500 x 2400 x 1800 mm.
Weight : 12000 kg.
|
|
PBM-16 Technical specifications
Clamping range : 60 - 410 mm. (2" - 16")
Turning range : 60 - 330 mm.
Motor : 400V. - 3 ph. - 4,5 / 5,5 kW
Clamping : prism clamping, manual
Machining : carbide inserts
Max. wall thickness
: 25 mm. in one pass
Feed
: manual
Feed travel : 100 mm.
Turning speed : 36, 48, 72 and 96 rpm
Measurements : 1400 x 1100 x 1900 mm.
Weight : 2250 kg.
|
|
PBM-4
Clamping range : 20 - 116 mm. O.D (1/2 - 4")
Turning range : 10 - 116 mm.
Motor : 400 V-3ph-50Hz -2,6 / 3,2 kW
Clamping : prism clamping, manual
Machining : carbide inserts
Max. wall thickness : 17 mm. in one pass
Feed : manual
Feed travel : 100 mm.
Turning speed : 96 and 195 r.p.m
Measurements : 90 x 74 x 130 cm.
Weight : 700 kg.
|
|
series RS 100 is the perfect machine to realize in a minimum of time of the cuts of tubes to the serrated roller.
copper, stainless, steel, Plastique, this machine is addressed as well to the pipe fitters as with the industrial or hotel pomblier.
any modification of hydraulic, pneumatic, gas system can be considered with the machines type RS of 12 mm has 32 for series RS 32 and of 40 mm 110 mm for the RS100 have
|
|
Universal Pipe Cutter
SCORP 170(e)
SCORP 220 Plus
SCORP 360
The ultimate and fast solution for cutting of cast iron, stainless steel, steel, copper, aluminum and plastic pipes.
Ideal for pipe fitters to use on construction sites and in industrial pipe installations.
Your advantage:
• Powerful and lightweight machine
• Secure opertion by means of overload protection and saw blade guard
• Burr-free and square cut
• Corrosion and heat resistant
• The SCORP 170e now incorporates a speed regulator
Your benefits:
• Wide range of applications and dimensions
• No rework necessary
• Suitable for clamping joints
• Reduction of tool costs
• Lightweight, single person operation
|
|
Tube cutter, 4485M
For copper, brass, aluminium and thin-walled steel tubes. Lateral guide.
Two guide rollers, one cutting wheel. Spare cutting wheel safely housed in handle. Built-in retractable reamer. Grooved rollers for close-to-flare cuts.
|
|
Pipe/Tube Cutting & Preparation
* Wide selection from a single source.
* Durable designs.
* Exclusive features for maximum productivity.
|
|
CT 7-61 (fiche tech GB)
Diameters from 7 to 61 mm
Thickness from .... to ....mm
Weight :
Tightening clamp
Electric motor
Standard tools
|
|
STRONG POINTS
Low cost: rationalizing and simplifying the TOP technological solution without skimping on quality, a "concentrate" of Sinico's vast experience
Optimized automatic running: patented AVTC® (constant chip volume removal) system to provide a constant mean volume of chip removal under all operating conditions.
Machining precision: all operations are carried out in one chucking and the rotary transfer features Hirth gears
Quick tooling: the high level of automation means it takes much less time to adapt the machine when the product being made is changed
Short delivery times: an optimized production process and standardized components have enabled us to drastically reduce the time it takes to set up the machine.
|
|
|
|
|
|
Double head benders for wire, bars, profiles and tubes
ADVANTAGES
1. Very high productivity rate thanks to double head simultaneous bending
2. Bi-directional bending system (clockwise and counter-clockwise) with variable radius feature performed by the same bending head
3. Automatic bent part unloading
4. Automatic coil feeding and/or straightened cut to length bar not requiring set up times
5. Part straightening with in-line device at constant speed
6. The central clamping unit allows to bend more complex shapes such as closed parts, ends with eyelets, ends that reverse back to the inside of the closed parts
7. Ability to bend a “double” part (symmetrical or same) and cut them apart after bending.
8. Deep and clean chamfering, burr-less, before the bending cycle
9. Ability to bend parts with welded fixtures or flexible hoses and to bend armoured electrical resistances
10. Ready to be integrated in manufacturing cells with other machines and robot piece handling
11. Off-line automatic programming
Machines available in different versions, with or without coil :
DH2008 Max wire bending capacity Ø 8 mm
DH2010 Max wire bending capacity Ø 10 mm
DH2014 Max wire bending capacity Ø 14 mm
DH2014 Max wire bending capacity Ø 30mm
|
|
|
|
|
|
Argweld® Water Soluble Purge Film
For the manufacture of pipe purging dams, Argweld® water soluble film is now available.
The British manufactured product comes in a kit comprising:
A 20 metre length of 1 metre wide film folded in half and wound on a spool.
Two bottles of the adhesive.
A slitting knife to quickly cut the dams.
A comprehensive manual with instructions for use with hints and tips for weld purging.
The use of water soluble film for manufacture of purging dams is well proven and the Argweld® film gives superior results over all other water soluble products
It can be used for stainless, duplex and chrome-moly steels, as well as titanium.
The Argeld® purge material makes dams which produce an impenetrable purge barrier, but which can easily be washed away when hydrostatically testing the pipe or just by normal wash out.
It dissolves away completely without leaving any fibres to clog up filters or other sensitive parts in a system and it is strong in all directions so that it can maintain a good gas barrier throughout the purging process.
Trace element certification can be provided to show that purge film does not contain any harmful elements and that the quantity of halides is well below the permissible levels.
The film and adhesive are completely biodegradable and all packaging materials are recyclable.
Further information can be downloaded in PDF form available in our download section.
Contact our factory for more details on bulk order savings.
|
|
CERTI-CRIMP Hand Tools are top-of-the-line, premium, hand-operated tools for
crimping a broad array of terminals, contacts and special wiring devices available
from Tyco Electronics. They are designed to exacting specifications to produce
consistent, high-quality terminations. A potential service life of over 50,000
cycles is possible, depending on operator care.
|
|
|
WEICON Cable Strippers: Accurate, fast and safe stripping of all common round, coaxial, multi-sheathed and flexible cables. Flush stripping even in hard-to-reach areas. WEICON Wire Strippers: Automatic wire stripper for all common stranded and solid conductors. Strippers for works on live wires up to 1000 Volt are available. WEICON Multi-purpose Strippers: Professional cable and wire stripping with only one tool. Multi-purpose Strippers for all common stranded and solid conductors are available.
|
|
StripCrimp 200 - the most flexible strip-crimp machine (stripper crimper) in its class. The new generation machine is fully programmable and allows high-precision stripping and crimping of side- or rear-feed type terminals for wire sizes from 0.05 to 4 mm2 (AWG 30 - 12). With a press force of 33 kN, the StripCrimp 200 can process a great variety of terminals and wires.
Integrated crimp force monitoring provides for reliable crimp quality assurance and analysis of crimp data. Several additional functionalities such as re-cut, wayback, micro-adjustment and adjustable cycle speed allow state-of-the-art processing.
Next to other strip-crimp machines, Schleuniger also offers crimping presses, crimp applicators and crimp quality assurance devices.
|
|
Product Facts
n No need to strip magnet wire
n Connects up to 3 wires in 1 splice
n Crimp Quality Monitor (CQM)
auto adjusts crimp height and enables 6-sigma process quality
n Height adjusts in .0005 [0.013] increments over .064 range
n Change tooling quickly without major adjustments
|
|
| ... products without technical information |
| |
|
|
Tools for Pipes, Tubes, Cables
