|
|
For pressure testing and stopping all pipework from 50mm (2") upwards.
To complete the Pipestoppers™ range of nylon expanding plugs, aluminium plugs, steel drain plugs and inflatable stoppers, we offer double aluminium plugs for increased stability and higher pressure duties.
The test pressure capability of the single stoppers is limited and the double versions increase that capability, while offering a greater stability in the pipe.
As single plugs approach their pressure limits, they can tend to tip over like a butterfly valve. The double plugs will prevent the tipping and guarantee the seal.
They are manufactured with 0.5", 1" and 2" outlets.
The standard seals are made from natural rubber and special rubber seals are available for chemical applications, where greater resistance is required.
All plugs conform to British Standards BS 8005 for low pressure testing and sealing of pipes.
|
|
- Bending capacity: angle up to 80 x 80 mm (2-½” x 2-½”), pipe up to 3”
- Three driving rolls
- Two bending rolls with independent hydraulic adjustment (double pinch style)
- Lateral guide rolls with mechanical or hydraulic three-directional adjustment
- Combination horizontal-vertical working position
- Digital readouts for bending rolls
- Adjustable positive stops for maximum repositioning accuracy of bending rolls
- Universal standard rolls tooling for most regular steel sections with no extra equipment required
- Remote controls
- Adjustable slip clutch on the upper roll
- Also available with programmable positioners and 3- or 5-axis CNC control
Series 3000 incorporates 15 models with increasing capacity, featuring three driving rolls, double pinch style (the most flexible design), three-directional lateral guide rolls. Several versions are available for every model, with a wide range of optional equipment.
|
|
Simasv's bending machines are extremely heavy-duty and easily adaptable to any working requirement. All models are supplied with speed reducers, adjustable torque limiters and can be positioned both in a vertical or horizontal axis.
They are available in the models with three smooth driving rools and two knurled driving rolls, all equipped with a wide range of standard rolls to bend different types of profiles, bars, tubes, etc...
|
|
For pressure testing and stopping all pipework from 50mm (2") upwards.
To complete the Pipestoppers™ range of nylon expanding plugs, aluminium plugs, steel drain plugs and inflatable stoppers, we offer double steel plugs for increased stability and higher pressure duties.
The test pressure capability of the single stoppers is limited and the double versions increase that capability, while offering a greater stability in the pipe.
As single plugs approach their pressure limits, they can tend to tip over like a butterfly valve. The double plugs will prevent the tipping and guarantee the seal.
They are manufactured with 0.5", 1" and 2" outlets.
The standard seals are made from natural rubber and special rubber seals are available for chemical applications, where greater resistance is required.
All plugs conform to British Standards BS 8005 for low pressure testing and sealing of pipes.
|
|
|
|
|
|
PJ-1400-60
Pulse Jetter Drain Cleaner
Overview
The PJ-1400 Drain Cleaner is ideal for use in sink, shower, laundry tub and floor drains, and processing lines. This powerful unit comes equipped with three nozzles (one blind thrust, one penetrating and one cornering) to remove grease, hair, sand, food, soap buildup and other debris in pipes 1"-4" (38-102mm) I.D. The unit features a 1 HP (1.1 kW) thermal protected motor and a triplex pump to deliver 1,400 PSI of cleaning force at 1.7 GPM (97 BAR of cleaning force at 6.4 LPM). Accessories are available to also use this unit as a pressure washer.
Specs
. Motor Power: 1 HP (1.1 kW)
. Input Power: Standard: 15 amps, 115 V, 60 Hz AC (Optional 7.5 amps,230v,60Hz) or (15 amps 115v,50Hz or 7.5 amps 230v,50Hz)
. Output Water Pressure: 1,400 PSI at 1.7 GPM (97 BAR at 6.4 LPM)
. Pump: Triplex ceramic plunger running in oil bath
. Dimensions: 40" (1,020mm) high x 14" (360mm) wide x 21" (530mm)deep
. Weight: 95 lbs (43 kg) net dry
Features
. Pressure regulator - adjust the PSI (BAR) to fit the application
. Pulse control - allows navigation around tight bends
. Heavy-duty construction - long life
. Compact - ideal for use in tight areas
. GFCI circuit - protects operator
. Polyester reinforced hose - rugged
. Three nozzles - matches application
. Locking casters - prevents rolling
|
|
Bending machine functioning on the principle of stamping.
6 standard models of bending machine allowing to curve tubes of 3/8 " to 16 ", and up to 20 " in option:
0B58 (jack 8 Tons) capacity: 3/8 " to 1 1/4 "
OB 30 (jack 12 Tons) capacity: 3/8 " to 2 "
OB 40 (jack 18 Tons) capacity: 3/8 " to 3 "
0B 50 (jack 30 Tons) capacity: 2 " to 4 "
OB 50 P (jack 30 tons) capacity: 4 " to 8 "
Super OBMP150 (jack 100 tons): 4 " to 16 " (20 " in option)
Three types of motorization: electric, pneumatic, gasoline.
Accessories available for bending until 180° for models OB 30 and OB 40
|
|
Hose size : 2" 4 SP
.Swage force : 240 tons
.Opening : Die diameter + 38 mm
.Standard dies supplied : 15 18 21 27 33 39 45 51 57 66
.Motor : 4kW / 230-400V 3ph (2,2 kW / 220V 1 ph possible on option)
.Quick change tool : SRC on option
|
|
Model CC24
Crimping range (mm) 1 10 — 61
Crimping range (inches) 1 0.39 — 2.40
Crimping force (kN) 1300
Crimping force (tonnage) 130
Crimpings / hour 2 1280
Max. hose size (inches) 1¼
Die set 3 P20
Maximum opening (mm) 4 25
Master die (D / L mm) 84 / 80
Master die (D / L inches) 3.31 / 3.15
Control IS / VS
Motor (kW) 4
Motor (HP) 5.5
QC tool 14 O
Foot pedal 15 O
Control unit: integrated X
Control unit: C1 —
Control unit: C2 —
Back stop device: mechanic O
Back stop device: electric 15 X
Mirror —
Pressure control P1 16 —
Pressure control P2 16 —
AGS auto greasing 16 —
Remotic control unit —
Counter L1, L2, L3 —
ASCII signal 17 O
VS PLUS control 17 O
Length (mm) 597
Width (mm) 586
Height (mm) 613
Length (inches) 23.6
Width (inches) 23.1
Height (inches) 24.2
Weight (kg) 178
Weight (lbs) 393
|
|
Compact, self-contained and rapid electro-hydraulic tool for crimping connectors from 4 to 95 sqmm.
Ergonomic design and light weight enable crimping to be done one-handed.
Electronic speed control in the trigger.
Quick opening and closing head, rotatable 360°.
Adjustable stroke between 5 and 8 mm by rotation of graduated ring reducing the cycling number when crimping small sections.
Automatic release with an audible "click" when force of 35 kN is reached.
Piston return by release trigger.
Operates on 2 types of rechargeable battery :
- 12 V 2000 mAh battery delivered with the tool.
- battery with power load indicator as an option.
100 to 150 crimp operations possible before recharging.
Life :
1000 charges with standard 1 hour fast charger.
1500 charges with 15 min fast charger.
|
|
VAS 240 B
Portable electro-hydraulic with rechargeable battery.
180º swivel head with quick opening.
Safety pressure relief valve with audible discharge.
Interchangeable dies.
Supplied with metal storage case for machine and die holder (415 x 315 x 95 mm)
|
|
Battery powered crimping, cutting and universal tools
0,75 mm2 - 400 mm2
Battery powered crimping tools
Battery powered cutting tools
Battery powered universal tool
|
|
The series TUD express block is particularly pointed out to much thin pipes, to coo elettropulished pipes or in all those cases where the intern surface doesn't have to suffer mechanical or dimensional stress.
This macines operate on pipes of internal diameter among 4 and 168 mm. The system of patenteded rapid block allows an elevated productivity.
|
|
Tube Squaring Machines
RPG 1.0 Cordless, RPG 1.0 Cordless right-angled drive
RPG 1.5, RPG 1.5 Cordless
RPG 2.5, RPG 2.5 Cordless
RPG 4.5
RPG 8.6
Designed for burr-free squaring of thin-walled stainless steel tubes and micro fittings up to OD 219.1 mm (8.6 inch).
Your benefits:
- Squaring tube ends with high-quality surface
- Burr-free and square
- Quick clamping system for tools, clamping shells and tubes
- Preparation of thin-walled stainless steel tubes (V4A) and micro fittings
- High-performance coated tool bit with two cutting edges
- Built-in electronic speed regulation
- Micrometer feed for optimum results
- No additional fools required for operation
- Space saving, light weight and portable machine for a mobile and secure application
|
|
Rectifies twist and rotational misalignment without additional
stress in pipe lines
• For most commonly used ANSI, API, BS and DIN flanges
• No slings, hooks, or lifting gear. Extremely safe, high precision
• ATM-1 supplied with three bushings for different bolt hole sizes.
Can be used in reversed position
• ATM-3 fits on the following flanges:
– Ring Type Joints: flange wall thickness min 30 - max 100mm
– Gasket Type Joints: flange wall thickness min 25 - max 115mm
• ATM-5 Fits when flange joint is:
– between 93 - 228 mm [3.75 - 9 inch] apart and
– bolt hole size 31,5 mm [1.25 inch] or greater
• Can be installed and used in any position and any location
• Stays stable in position under full load
|
|
Portable GBC flange facing and/or gasket contact surface grooving equipments, suitable for on site operations with workpiece mounted on vessel.
Working range 1,5”- 36” (40mm – 900mm).
All equipments are i.d. locking/centering type and equipped with automatic feeding performing stepless finishing, variable pitch according with roughness index grade required.
|
|
|
|
|
|
SERCO XP 1200
PORTABLE FACING MACHINE
PRINCIPLE:
Machine with 4 fixing arms. Removable and adjustable (any angle) arms.
External fastening on the bolt holes of the flange.
Pneumatic drive (hydraulic or electric on request)
A manual and automatic central boring head drives a facing tool holder.
The adjustments of flatness and concentricity are inde-pendent. This allows a high precision and fine adjust-ment in relation to the chosen references.
SAFETY DEVICE IN CONFORMITY TO THE E.E.C. NORM:
ON/OFF emergency stop by means of an emergency "push" button.
Automatic stop through air lack, avoiding the start of the machine in case of air network restoring.
The emergency "push" button device can be locked.
APPLICATIONS:
Facing every type of flange: Ø 0 to 1200 mm
FEATURES:
• Min. facing diameter: 0 mm
• Max. facing diameter: 1200 mm
• Min. clamping diameter: 500 mm
• Max. clamping diameter: 1400 mm
• Radial stroke: 100 mm
• Radial auto-feed (2 speeds): 0,062 – 0,186 mm/round
• Automatic radial rapid return: 1,24 mm/round
• Max. stroke of the cutting tool for the machining pass: 50 mm
• Driving motor max. power (reversible): 2 kW/6 bar
• Driving motor maxi free speed: 45 rpm
• Working air pressure: 6 bar max.
• Air consumption: 2500 l/min
• Weight: 190 kg
• Height: 350 mm
CONTACT AND INFORMATION :
PROTEM SAS
ZI LES BOSSES
F-26800 ETOILE SUR RHONE
FRANCE
Tel +33 4 75574141
email : n.reicher@protem.fr
|
|
|
|
|
|
Schleuniger CrimpCenter fully automatic crimping machines take machine productivity and user-friendliness to a new level. With 3 up to 5 processing stations, the models of the CrimpCenter series process wire diameters from 0.05 mm2 up to 6 mm2 at up to 12 m/s feeding speed.
Depending on processing requirements and model, up to 3 crimping stations can be integrated or other stations such as sealing, twisting and lead-free tinning are also part of the standard configuration options.
With the unique ToolingShuttle System (TSS), the productivity of CrimpCenter fully automatic crimping machines can be increased by up to 40% when frequently changing applications (by significantly minimizing machine downtimes).
Various options for processing closed barrel terminals (split cycle), mini-seals, zip cord wires, or doubling crimp are available. Unmatched user-friendliness with touch screen and networking over TCP/IP are just a few other benefits of the new generation CrimpCenter fully automatic crimping machines.
Schleuniger also offers solutions for cable prefeeding.
|
|
|
|
|
|
AMPOMATOR System III
As your workload changes, the best change for you to make is to the AMPOMATOR System III Leadmaker. It takes maximum advantage of the automation possibilities available with the System III Applicator and AMP-O-LECTRIC ST III Terminator. There's a seamless flow of information, so setup, terminating, and quality control happen virtually without operator intervention. Based on the familiar Alpha 433, with easy-to-use TopWin software.
The Control Center...
The AMP-O-LECTRIC ST III Terminator gives you faster changeover and higher uptime. Featuring automatic adjustment of initial crimp height with stepper motor drive, wire line adjust and control software that makes fine adjustment of crimp height automatically once a connection is established with the iButton module.
Full electronic control for full automation.
It Starts with the Applicator...
The System III Applicator features a better aligned, round ram, an iButton data module for built-in intelligence and a separate feed - independent of the ram stroke.
The System III Applicator combines the best of the past with the thinking of today.
Your choice...
Choose your Seal Loading Unit.
The PAWOMAT SLU is integrated into the leadmaker with an I/O interface. It features improved processing speed and cycle time.
The Komax mci 761 seal applicator is integrated by the MCI interface for seamless operation. The OMI device controls the unit with just two keys and a digital potentiometer.
|
|
ITACA SOLUTION AUTOMATIC
A very important transformation of crimping machine concept, appreciated by the companies of any size because of improving the aspects they don't concern the size. The positioning costs will be bring down and the tools storage will be avoided. The machine is controlled by an electronic system able to memorize the crimping data (the profile's points where the crimping will be carried out) for any profile. The control system needs this information for the automatic positioning of reference fork of the profile and of the crimping tools. The fork and the tools will be automatically positioned entering profile data to be worked. The knives are universal for any profile, in case some tools must be replaced, the operator will be informed about it by the system. The replacement is immediate. The machine is supplied with the tools.
|
|
Fully automated terminating machine for connector series ECO-TRONIC / ECO-TRONIC pro / ECO-DOMO FT
Main Features
Highly efficient manufacture of jumper lead assemblies
Simple to operate
Low setting-up times
Modular concept
Compact machine design
Excellent price/performance relation
Machine concept suitable for various connector systems
|
|
|
Hydraulically expand heat exchanger tubes into tube sheets through the direct application of high internal hydraulic pressure within an established expansion zone.
|
|
|
Tubomatic V133ES is a production crimping machines suitable for series production. It can crimp hoses up to 4".
|
|
.Hose size : 10"
.Swage force : 400 tons
.Opening : Die diameter + 125 mm
.Opening without dies : 350 mm
.Dies : to be defined together with the customer
.Motor : 5,5kW / 230-400V 3ph
.Quick change tool : SRC on option
|
|
Model FP165
Crimping range (mm) 1 10 — 202
Crimping range (inches) 1 0.39 — 7.95
Crimping force (kN) 5000
Crimping force (tonnage) 500
Crimpings / hour 2 1260
Max. hose size (inches) 6
Die set 3 P329 / FP160
Maximum opening (mm) 4 125
Master die (D / L mm) 220 / 116
Master die (D / L inches) 8.66 / 4.57
Control IS / VS
Motor (kW) 5.5
Motor (HP) 7.5
QC tool 14 X
Foot pedal 15 X
Control unit: integrated —
Control unit: C1 X
Control unit: C2 O
Back stop device: mechanic O
Back stop device: electric 15 X
Mirror X
Pressure control P1 16 O
Pressure control P2 16 —
AGS auto greasing 16 O
Remotic control unit O
Counter L1, L2, L3 O
ASCII signal 17 O
VS PLUS control 17 O
Length (mm) 1060 / 600
Width (mm) 860 / 1056
Height (mm) 1825 / 1185
Length (inches) 71.8 / 23.7
Width (inches) 33.9 / 41.6
Height (inches) 71.9 / 46.7
Weight (kg) 2460 / 225
Weight (lbs) 5423 / 496
|
|
Service Crimpers.
Max Hose Diameter: 2” R13 *
4” ½ industrial
Crimping force: 340 T
Dies Size : 6.8-9-12-14-17-20-24-28-32-36-40-44-47-50-54-57-62-67-71
Max Die Opening w/o Dies 160 mm.
Max opening Die Size plus : 38 mm.
Dimensions : L 736 mm x H 810 mm x l 510 mm.
motor power : 3,7 KW
Electrical Power : 400 V 50 Hz 3 Ph
Weight : 265 kg
Back Stop
Quick change tool.
Pedal
To Store for 9 sets of Dies.
According to the hose and fitting.
|
|
|
|
|
|
Eaton Aeroquip® MatchMate® ET1280 Crimp Machine
Assembles Hose As Easy As One, Two, Three
BADEN-BADEN, Germany ... Diversified industrial manufacturer Eaton Corporation recently introduced the Aeroquip® MatchMate® hose assembly system. MatchMate guides users through three simple steps to assemble Aeroquip high-quality hoses and through-the-cover (TTC) fittings. This year, Eaton's made hose assembly even easier by introducing the new MatchMate ET1280 crimp machine.
The CE certified ET1280 crimp machine is available for 220 volt hydraulic, hand pump, air/hydraulic; 110 volt hydraulic; and 12 volt electric. ET1280's flexible power supply with the popular MatchMate hoses and fittings make small-batch assemblies in the factory or field as easy as one, two, three. ET1280 unites the best of Aeroquip engineering, supported through the Eaton Walterscheid machining center of excellence. Eaton Walterscheid produces industry leading tube-forming machines, the Walform, and the Walform Plus.
MatchMate hose and fittings are each marked with symbols, indicating that they go together. The no skive trithiocarbonate chemistries (TTC) fittings can then easily be crimped or mated with one of the color-coded crimp dies included in the 8-die package available with the machine. The visual identification system enables dealers and customers to make hose connections quickly, simply and safely.
|
|
SWAGING FORCE 300 Ton
CAPACITY ON 6 SPIRALS HOSE 2" *
CAPACITY ON 4 SPIRALS HOSE 2" interlock
CAPACITY ON 2 SPIRALS HOSE 3"
MAXIMUM CRIMPING Ø 80 mm
DIES OPENING Ø + 43mm
STANDARD VOLTAGE 400V 50Hz 3PH
MOTOR POWER 5,5 KW
WEIGHT WITH OIL 429 KG
DIMENSIONS L x D x H 760 x 580 x 780 mm
DISPENSER QUICK CHANGE OPTIONAL
STORAGE RACK OPTIONAL
ELECTRIC PEDAL OPTIONAL
INTERLOCK DIES OPTIONAL
MARKING DIES OPTIONAL
SPECIAL DIES OPTIONAL
ELECTRIC LIMIT SWITCH included
DOUBLE ACTING CYLINDER included
OIL included
|
|
|
Lightweight, portable crimper designed for reliability in field service. Comes with separate box, designed to contain complete set of dies. The pneumatic version has a foot-operated air pump. Crimps no-skive MegaCrimp® couplings for wire-braid hose up to 1".
|
|
|
|
Tools for Pipes, Tubes, Cables
