|
|
parts resting in baskets or racks
charging operations
standard design in 2 (charging) sizes
customized adjustments
modular design
single or multi-stage washing and rinsing process
spraying, immersion, flood and blow-off cleaning, ultra-sound, hot-air drying, vacuum drying
turning and rotation of goods
manual and automatic charging
|
|
M25I, M40I, M80I, M120I and M160IThe MI features include
- Powerful ultrasonic for precision cleaning
Strong welded tank made of A1S1 316 for long service life
-Full width overflow weir with cut-off valve for surface skimming or overflow cascading
-Level sensor for protection of heating elements and ultrasonics against dry run
-Electronic control panel for monitoring and storing of wash time and temperature
-Double lid with thermal and acoustic insulation
|
|
Industrial Parts Washers
Include:
Stainless steel tank-fully insulated
Exterior Hammertone powder coat finish
Built-in thermostatically adjustable heat
Digital timer controlled ultrasound
40 KHz frequency with sweep
Hinged stainless steel cover
Dual cartridge filtration with weir and spray bar
|
|
|
Magnus' sister company, Power Sonics, provides the ultrasonics for Magnus immersion agitation tanks. The ultrasonics cavitation distributes a very intense mechanical energy to reduce cleaning time and clean some soils that immersion agitation alone will not remove. Our ultrasonic application involves more than placing some transducers in a tank. Magnus uses the expertise of Power Sonics to integrate the ultrasonics and insure it is the right application for the situation. Ultrasonic tanks may employ a sequence of alternating immersion agitation and ultrasonics to provide the optimum cleaning. Power Sonics Ultrasonics is available integrated into Magnus immersion agitation systems as well as custom mono-rail or in line systems.
|
|
HAMO T-840
Automatic Multi-Chamber Cleaning System for Spray and/or Ultrasonic Cleaning, Disinfecting and Drying
Wash chamber 640/640/640 mm (25.20/25.20/25.20 inches) (W/H/D).
The economical machine for cleaning, disinfecting in the central sterilisation department.
Highest Demands for Cleaning and Disinfection in Hospitals
High Performance Tunnel Washer with Ultrasonic Chamber
|
|
The units of the "Compact U.S." or "Special U.S." series are made up of washing tubs supplied with one or more electrostrictive transducers.
Their operating principle consists in propagating vibrations through the liquid at a variable frequency, that can generate high-pressure and lowpressure waves, resulting in the cavitation of the liquid.
Cavitation produces vapour bubbles that implode and thus hit the walls of the component being treated an infinite number of times. This reduced but diffuse force helps detaching the dry dirt. All reservoirs are constructed in stainless steel and are doubleskinned with thermal insulation.
The construction of multiple stage systems in semiautomatic and automatic versions may be achieved by aligning the single units according to the treatment which the mechanical pieces must undergo.
|
|
Our console cleaning units are freestanding, single-tank cleaners. They can be placed in a variety of manufacturing environments from single-operator work cells to automated, high-throughput process lines.
The three families of console cleaning units are:
CH-Series
WashMaster
Atlantis
...
|
|
Feature :
1. Easy to expand, convenient to operate.
2. Low cost & inexpensive.
3. Easy to clean, convenient to match not, limited by field space.
4. Molded assembly and free option.
|
|
Manage the cleanliness process with the easy to use FinnSonic V03 control system. Explore the flexible and affordable product range for maintenance and production.
Modular MI Range is engineered for optimum cleaning result. The M Industrial ultrasonic stainless steel cleaning tanks are used as single-stage bench top units or as part of a fully integrated modular cleaning system.
|
|
ULTRASONIC CLEAN AND RINSE SYSTEMS
Pulsatron UCR Mk2 aqueous clean and rinse systems provide a heated ultrasonic cleaning tank, an immersion rinse weiring to drain, and a hand held spray for final rinse. Example uses include:
* Production cleaning - removal of oils, swarf, polishing compound, brazing flux, solder flux, carbonised deposits etc
* Refurbishment of computer parts, engine components etc
* Maintenance of mould tools, extrusion dies, printing components, surgical instruments, electronics assembly system parts, and small machine components
UCR systems are microprocessor controlled, allowing
the user to pre-set precise cleaning times and solution temperatures.
|
|
|
|
|
|
The final operation in the process of precision surfacing with abrasive media is cleaning, and Lapmaster Ultrasonic Cleaning Systems offer performance second to none.
Ultrasonic cleaning is faster, more thorough, and safer than any other method. Scrubbing, soaking and steam don't even come close. Lapmaster Ultrasonic Cleaners are powerful enough to remove heavy oils, waxes or slurries, yet gentle enough to clean tiny, precision assemblies.
Ultrasonic sound waves moving through a cleaning solution create an effect called cavitation: the rapid formation and implosion of microscopic bubbles. Heat enhances the process. The deep cleaning action of ultrasonics removes even the most stubborn dirt and contaminants.
There are many models available, from stand alone benchtop systems with capacities of 1/2 litre up to 90 litres to larger floor standing production systems with multi-tank automated processing capabilities. Lapmaster also offers a complete line of companion cleaning agents and equipment accessories.
|
|
|
|
|
|
Novatec’s production includes a wide range of standard installations.
Cleaning and Drying Systems: ultrasonic cleaning and rinsing both standard and according to the customer’s specific requests. Modular surface treatment systems for immersion and/or spray treatment with single or cascading stages. Hot air dryers, infra-red and vacuum dryers, centrifugal dryers. Solvent dryers, ultrasonic degreasing machines, spray-cleaning machines. – Compact ultrasonic cleaning Tanks for laboratory or research applications.
Ultrasonics: piezoelectric and magnetostrictive ultrasonic generators, flanged or bulkhead mount submersible transducers. Available work frequencies from 18 to 100 kHz. Modular construction of the piezoelectric units allow to supply a generator also with different frequencies.
Automation: 2 or 3 axes handling systems with load capacity up to 1000 kg.
Air and Water treatment: water softeners, reverse osmosis, active carbon water filtration systems and manual or automatic water demineralising systems, ultra-filtration systems and evaporators under vacuum which allow to work environment-friendly. Extraction, filtration and air treatment systems (powders and vapours), clean rooms.
Painting: manual or automatic water veil or dry cabins, pre-drying modules and dryers.
NDT: Automatic FPI Dye-Pen, wash and developer systems.
|
|
Our console cleaning units are freestanding, single-tank cleaners. They can be placed in a variety of manufacturing environments from single-operator work cells to automated, high-throughput process lines.
The three families of console cleaning units are:
CH-Series
WashMaster
Atlantis
...
|
|
Continuous in-line flow RADIAL systems are ideal for applications such as in-line continuous product cleaning of wire, strip, rod, tube and bar material. These systems clean, rinse and dry at speeds up to many hundreds of feet per minute in mild aqueous solutions. Cleaning is achieved by passing product through exclusive Power Sonics RADIAL 360 degree transducers. Cavitation levels are 10 times, or more, as great at the same power input as convention flat type transducers. Floor space is optimized since systems are generally integrally mounted on their own bedplate base, also simplifying installation.
- Available in two diameter sizes
- Ultrasonic wash, spray rinse models
- Ultrasonics wash, ultrasonic rinse models
- Options for pre-spray and post-spray sections
- Options for air wipe sections
- Various filtration and other ancillary options available
|
|
The LIXEA cleaner BA is a tank of ultrasounds treatment simple and powerful whose dimensions and the ultrasonic power are adapted to the application.
thanks to the exceptional performances of the ultrasounds, the LIXEA cleaner series BA associated with a detergent makes it possible to wash, degrease, décolmater, to pickle, decontaminate metal or plastic parts.
Composed of an electrical power box and a stainless tank equipped with transducers with ultrasounds.
The equipment perhaps equipped with a module with heating with the bath and adjustment with the duration with treatment.
|
|
|
|
|
|
The LIXEA cleaner series IP or AND is an economic simple solution and for the cleaning of the large materials of industrial and professional kitchen, machine elements, electronic, material charts optics.
It is composed of an electrical power box and a paving stone immergeable with
ultrasounds (for series IT) and of a plastic Vat in which a paving stone immergeable is integrated (Series AND).
Thanks to the exceptional performances of the ultrasounds, the LIXEA cleaner series IP or AND, associated with a detergent, enables you to wash, degrease, décolmater, to pickle, decontaminate, more quickly and more effectively any material out of plastic or very dirty metal even:
Your plates and grids of cooking,
Your moulds of preparation,
Your kitchen utensils and drainer
Your dishes, pans and lids
Your vats gastronomes,...
The LIXEA cleaner series IP adapts simply, without tool nor modification with your existing vats, and this for all geometries and sizes of parts to be cleaned.
The LIXEA cleaner series AND can be connected on warm water arrival or function in autonomy with the kit heating and circulation of the bath.
|
|
Ultrasonic cleaning SONOWAVE
with external generators are specifically designed for the high demands made during industrial use.
• Cleaning tank made of 2 mm stainless steel 1.4571
Base of the tank made of 3 mm stainless steel 1.4571
Casing made of 1.5 mm stainless steel 1.4301
• Ultrasonic generator with all features of the SONIC DIGITAL generator series
• Heating with digital temperature control up to 80° C and digital display
• Digital time setting and display
• Standard frequencies: 25, 30, 40 and 80 to 150 kHz
• Multi-frequency cleaning tank
|
|
Basic ultrasonic cleaning tanks
The tanks sizes can be manufactured to your requirement, volumes up to 650 litres.
Flexible tank sizes
Boosted performance
Good cleaning result
Easy service and maintenance
|
|
|
|
|
|
INDUSTRIAL CLEANING TANKS
Pulsatron KS ultrasonic cleaning tanks are robustly constructed using AISI 316L polished stainless steel for durability, while Kerry Pulsatron ultrasonic generators ensure powerful parts cleaning and long equipment life. Typical uses include:
* Production cleaning - removal of oils, swarf, polishing compound, brazing flux, solder flux, carbonised deposits, moulding residues
* Refurbishment of computer, photocopier and engine components
* Maintenance of mould tools, extrusion dies, printing components, surgical instruments, electronics assembly system parts, and small machine components
KS tanks are microprocessor controlled for precision and repeatability. Sonics may be set in 6 second increments up to 99 minutes, and solution temperature may be set in the range 20 - 80°C in 1°C increments.
Standard KS systems operate at 38 kHz (±10%); however, optional
Neptune generator control allows switchable dual frequency
(35/70 kHz ±10%), variable power control and programmable operation of up to seven programs.
|
|
Standard and bespoke sizes available.
Single tank ultrasonic aqueous cleaning system with the following features:
- All stainless steel
- BSP drain valve
- Heated tank
- Thermostatically controlled
- Bolt in transducer plate
- Separate generator (see below)
- Tank size (as required)
- Overall size (as required)
- Capacity (as required)
- Industrial standard - continually rated
- Insulated frame
- Basket & lid inclusive
- Table top mounted
- Operates from standard mains volatage
- CE certified
|
|
1 / 1 - KOMBI 48/12 A
A washing plant which uses aqueous solutions activated by ultrasound, and rinsing on carbon and mixed resin bed columns. Drying is carried out with hot air in a tunnel type oven. The plant is completely carinated.
The baskets handling system is completely automatic and is managed by a PLC which is easy to program using the tactile screen.
|
|
auto industry
techniques of transformatione
thermics treatment
aircraft industry
clock industry
electronics manufacture
|
|
These ecologic degreasing machines have got a cycle with closed chamber. They work both with chlorinate solvents, like percloroethylene, or with hydrocarbon aliphatic solvents.The machine is manufactured in three standard versions and can anyway be realized in special versions as per producing requirements, dimensional or working flow.
Design and use of these degreasing machines is requested by the market which searches in this machine an alternative to the pieces washers coming from textile washing. Cycle times are about 6 minutes instead of 20-30 minutes.
The main characteristic of these machines is that they work under vacuum. Ultrasounds with hydrocarbons in machines working by solvents as known traditional piezoelectric or magneto-restrictive ultrasounds meet difficulties in making liquids cavitate. ITF does have a special ultrasound group with microprocessor with which you can get cavitation results that can be hard reached through conventional ultrasounds on the market.
|
|
|
Layers of burnt oil and other solid contaminants (oxides and lapping and polishing pastes) deposited on the component require on the other hand the action of ultrasonics which can be fitted on request in the majority of closed-circuit systems. When the energy of the ultrasonics is transmitted to the solvent, its action is reinforced and detachment is made easier of the pollutants deposited on the surface of the component part, thanks to the cavitation action which quickly produces thousands of small bubbles that implode on the contaminant and break it up.
|
|
|
|
|
|
The Branson B-Series Ultrasonic Vapor Degreaser is the latest in a series of environmentally sound, cost effective precision degreasers. Branson, well known for ultrasonics,is also the global leader in solvent cleaning technology.The B-Series integrates over 55 years of degreasing experience with the demanding needs of a changing marketplace to offer you a functional solvent solution to your cleaning needs. Similar in operation to a traditional two sump unit, they incorporate all of the important environmental and safety features you need, including two onboard compressors for both primary and sub-zero cooling and 40 kHz ultrasonics. All controls are clustered on a compact front-mounted 24 volt digital control panels. The B-Series is ideal for use with most commercially available vapor degreasing solvents.
FEATURES:
Freeboard ratio of greater than 120% to eliminate diffusion losses
Refrigerated primary condensing coil to condense the bulk of the solvent vapors
Refrigerated sub-zero freeboard condenser to provide a cold air barrier minimizing fugitive losses
Sliding cover to eliminate drafts and help seal the unit during periods of inactivity.
Offset boiling sump with liquid level control (except on B452R)
Bag filter to minimize solvent loss during maintenance
Cooled internal water separator to reduce losses
Stainless plumbing for solvent-wetted areas
|
|
| ... products without technical information |
| |
|
|
Ultrasonic cleaning: Machines, Tanks, Tunnels ...
