- Production Machines >
- Other Manufacturing Equipment >
- Technical gas production equipment
Technical gas production equipment
‘MAXIMUS’, Latin for ‘Greatest’, is the Industrial range of PSA Nitrogen Gas Generators from Noblegen. The Generator is controlled using the latest in HMI touch screen technology to display the process, pressures, dew-point and oxygen ...
Nitrogenium Innovations Filteration India
Flow rate: 0.56 m³/h - 20.8 m³/h
Output pressure: 7 bar - 9 bar
Nitrogen Gas Generator Air from the Dryer is sent through the coalescing filter where the water and oil coalesce and get purged through the drain valve. Two aluminium towers filled with carbon molecular sieves are used for continuous ...
Flow rate: 0.35 l/min
Output pressure: 90 psi
Gas purity: 99.9999 %
The PEM-HG is able to generate up to 350 cc/min of Hydrogen with purity better than 99.9995% and pressure up to 90 psi That is adjustable by user via Keypad The PEM-HG use long life electrolytic cell with polymeric membrane (PEM) using ...
Flow rate: 0.006 m³/h - 0.198 m³/h
Output pressure: 7 bar - 16 bar
Gas purity: 99.99 %
High reliability guaranteed by exclusive and patented solutions (e.g. electronic GLS). Equipped with PEM technology, flow-rates from 100 cc/min to 3300 cc/min and pressure up to 16 bars, with very high purity. High efficiency self-regenerating ...
SRA
Output pressure: 2.7 bar - 5 bar
OXYMAT Modular PSA Oxygen Generators OXYMAT is proud to present the first modular PSA generator with the lowest power consumption on the market. This new line of oxygen generators will provide our customers with the same high gas ...
OXYMAT
Gas purity: 93 %
Rated capacity: 600, 500 W
Ozone Engineers OxyNxtGen – Oxygen concentrator works with PSA (Pressure Swing Adsorption) Technology to produce oxygen, Uses ambient air as source of oxygen. It is designed to deliver continuous and concentrated flow of oxygen. It has ...
Ozone Engineers
HYDROFILL PRO is a “hydrogen on demand” desktop refueling station designed for easy and automatic refilling of HYDROSTIK PRO metal hydride cartridges. Add pure water and connect to the AC grid, DC solar or wind power solutions for a completely ...
Flow rate: 1 m³/h - 2,000 m³/h
Output pressure: 5 bar - 330 bar
Gas purity: 95 % - 99.999 %
A nitrogen generator is an industrial system used to separate nitrogen from other gases in the ambient air, using a compressed air inlet, providing a varying flow and purity depending on the various applications. Today, PSA and membrane ...
Rated capacity: 100 kW
Extends Range of FCEV On-demand fuel cell grade hydrogen generation produced from a tank of environmentally friendly, easily handled, hydrogen dense blend of methanol and DI water, increases the range of FCEVs beyond that which can be ...
RIX Industries
Flow rate: 3 m³/h - 280 m³/h
Output pressure: 6.4 bar
Twin tower oxygen generators are the machines we will accept as traditional. Many oxygen generators around the world have twin tower designs. They show great performance in harsh working environments. Amec Industries manufactures two ...
Amec Industries
Flow rate: 10 m³/h - 100 m³/h
Output pressure: 6 bar - 12 bar
Nitrogen generators, Nitréo series are specially designed for medium to large nitrogen consumption. They are dedicated to industry and wine industry. Specifications Flow : 3,5 - 150 m3 / hour Purity: 99,99 % a 95 % Power: 0,2 kW Dimensions ...
AIRTECH & OENOMECA
The SPIRFLAME® is a worldwide patented multicell electrolyser with a powerful, adjustable, electronically stabilized hydrogen-oxygen gas output. From this gas output, either one or more torches can be fed over a gas network. The gases ...
Spirig Ernest
To meet the customer need for small-size high-quality inexpensive nitrogen generators, Grasys, upon thorough review of competing domestic and foreign analogs, is prepared to offer its customers the serial adsorption nitrogen plants NITROPOWER ...
GRASYS JSC
Flow rate: 0.5 l/min
MINIATURE N2 GENERATOR ALN-005 This ultra small N2 generator and can be built into soldering robots or attached externally. A 0.5 liter per minute flow rate helps clean soldering surface and eliminate oxidation. NITROGEN GAS GENERATOR ...
Equipment for filling, topping up and testing SF6 gas chambers The SF6 filling and testing units facilitate the safe and efficient filling, topping-up and checking of system pressure in SF6 gas chambers. The operating points for SF6 ...
Output pressure: 1,300,000 Pa - 2,000,000 Pa
Introduction The natural gas, prior to pressurization, desulfurization and mixing with aqueous vapor, is passed through a special reformer which is packed with catalyst for cracking and reforming effluent-a mixture of H2 CO2 and CO.After ...
Angstrom Advanced
FULLY AUTOMATIC A / C STATION WITH TOUCH SCREEN COLOR SCREEN AND PRINTER • Suitable for R134a and R1234yf refrigerants • 7 "touch screen color display • Two 12.5 kg tanks with 2 load cells • Vacuum pump 100 l/min • Two 400 g/min ...
SPIN s.r.l.
Flow rate: 1.2 m³/h
Output pressure: 7, 1.5 bar
OXYPLE Oxygen Generator Old Generation O2 Generators Burdensome initial installation cost Oxygen production more than needed Unnecessary power consumption Previous oxygen generators with bulky, inconvenient and manually controlled design ...
JUVAIR
The Inspiration SX1 gas generator has been designed specifically to support the full range of Sciex Mass Spectrometers. The Inspiration SX1 gas generator has been designed specifically to support the full range of Sciex Mass Spectrometers. Fed ...
Lab Gas Parts Ltd
The HySTAT® hydrogen generator uses water and electricity to produce high quality hydrogen on demand. The basic HySTAT® 15, displayed here, was first introduced to our customers more than a decade ago. Since then the HySTAT® has been ...
Hydrogenics
Flow rate: 8.9 m³/h - 68.9 m³/h
Output pressure: 0 bar - 10 bar
With the BOGE nitrogen PSA generator, you can produce nitrogen to your individual needs. Forget inflexible supplies. With this generator, you can adjust power delivery, quantity and purity. And the best thing? It’s not only more efficient, ...
Flow rate: 2.6 m³/h - 15.8 m³/h
Output pressure: 0 bar - 7.5 bar
Gas purity: 90 % - 95 %
The BOGE oxygen PSA generator produces oxygen for your needs. Your dependence on an inflexible oxygen supply is now a thing of the past, and there’s no more need to store potentially dangerous high-pressure containers. The BOGE generator ...
Flow rate: 12,000 l/h
The ideal generator for the tyre specialist: the innovative design combines small dimensions with a large production capacity
Flow rate: 0.55 m³/h - 24.5 m³/h
Output pressure: 78 psi - 87 psi
Using high quality compressed air to supply the nitrogen generators, ensures long and trouble-free service and guarantees optimum performance. Gardner Denver compressors and pre-treatment packages including dryers and filters guarantee ...
Flow rate: 1.7 ft³/min - 94.7 ft³/min
Ingersoll Rand's on-site nitrogen generators offer quality and reliability built-in, so that you can focus on maximizing the productivity of your operations. Our efficient designs generate nitrogen from freely available air and allow ...
INGERSOLL RAND
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining