- Production Machines >
- Other Manufacturing Equipment >
- Other production machines
Other production machines
KLT 240 most advanced production tube line, using the latest Aisa technologies. The line is composed of a Body Maker (BM 240 Hiflex), a Header (PTH 240m) and a Capper (CM 240). Key benefits • Simple and very efficient production ...
AISA
most flexible fully automatic machine dedicated to the production of ABL or PBL laminate sleeves at a speed of up to 240 pieces per minute, with traditional overlap or edge welding side seam. Key benefits • Decoseam™ 360° decoration • ...
AISA
Fully automatic machine dedicated to the production of ABL or PBL laminate tubes at a speed of up to 120 tubes per minute, with traditional overlap side seam. Key benefits • Most affordable automatic laminate tube making machine ...
AISA
YVROUD proposes pelleting lines with a capacity of a few kg and flow of 150 kg/h, for development or research applications: •Extruders with a diameter of 18 - 60 mm •Cooling trays in different lengths, with an optional cooler. •Granulators ...
Dynamic Perf 520-DP1 The most important This Dynamic Punching unit is designed to work with paper without perforation in continuous line, in front of the new digital printers or devices that need the creation of horizontal and vertical ...
Punching Module 520-PU1 is the solution for data centers that need tractors systems. Using Standard paper to produce the perforation in single or double production (two or four hole rings). You have the option to have marginal perforations ...
Roll width: 200 mm - 520 mm
SPECIFICATIONS • Maximal speed: 200 m. min. • Roll diameter: 1320 mm (52”) • Web width: 200-520 mm • Pull strength: 400 N • Electrical specifications: 400/480V 3L+PE The modular Unwind 520-U1 and Rewind 520R1 generate full-line ...
double side calibrating milling machinesMachines with bottom and top rotors as well as feeding belts above and below, are used for calibration of very thin workpieces, such as hardwood top layers for production of engineered flooring.
Ledinek
one side calibrating milling machinesMachines with a top rotor and feeding belt below are used for calibration of very thin workpieces, such as hardwood top layers for production of engineered flooring.
Ledinek
wide calibrating milling machinesMachine with top rotor and bottom feeding belt and machine with bottom and top rotor as well as top and bottom feeding belts are used for calibration of wide glued panels or other different engineered products.
Ledinek
1.Drawing of the profile of the silo panel: (Machine can be customized according to your needs, the following picture is the drawing provided by our customer, for reference only.) 3.Working process of the production line: Hydraulic ...
Thomas Machinery Manufacturing Co. Ltd.
Silo corrugated panel machines have been recognized for their robust design, a variety of pre or post eut options, mechanical or hydraulic press system designs. They are reliable and accurate. Available destacking, stacking, and curving ...
Thomas Machinery Manufacturing Co. Ltd.
Silo Silo upright production line : Storage silo manufacturers know that punch accuracy and minimal flare are critical in Silo column , and so do we. That's why we offer a variety of robust, accurate silo post line solutions to handle ...
Thomas Machinery Manufacturing Co. Ltd.
PHE’s Plates Forming Production Line The production line is widely used for forming large type of sheet metal, such as heat exchanger plate. It is mainly composed of YR27 Sheet forming hydraulic press, YS26 hydraulic punching/trim press, ...
SYHP
Force: 3,500, 4,000, 6,000, 8,000 tf
YR27 3500/4000/6000/8000 TON PTFE Moulding Sheet Hydraulic Press PTFE powder is compressed in sheet forming by hydraulic press. And then sintered in hot air ovens. The machine is mainly used for powder compressed such as PTFE/Teflon ...
SYHP
The YS51-Vulcanizing Hydraulic press is used for heat exchanger gaskets production. The structure of the machine is frame structure, with the cylinder on bottom. The machine has independent hydraulic system and PLC electric control system. ...
SYHP
Laboratory machine to produce lipsticks in a laboratory by soft mould technology. 2 versions available with or without doser with 2 nozzles and melting tank (1 liter). Heating system by infrared short wave (patented), for 4 lipsticks Temperature ...
P-2000 Laser Based Micropipette Puller The P-2000 micropipette puller represents a significant advance in the technology of fabrication of micropipettes, optical fiber probes, and nanospray tips. The P-2000 integrates a CO2 laser-based ...
SUTTER INSTRUMENT
Developed through years of experience with the Flaming/Brown style micropipette pullers and infused with leading edge technology, Sutter is proud to introduce the P-1000 micropipette puller. The most obvious new feature is the color touchscreen ...
SUTTER INSTRUMENT
The P-97 Flaming/Brown type micropipette puller is ideal for fabricating micropipettes, patch pipettes and microinjection needles. While retaining many of the features of earlier models, the P-97 offers improvements in mechanical, electronic ...
SUTTER INSTRUMENT
Manual cable winding device type R41, brand LOIMEX, to measure and make coils of cable with the coiler unit, which the core and front crosspiece being articulated for the quick extraction of the cable, due to the decrease of the inside ...
Manual cable winding machine, type D30H, they are only used to make rolls, either from original factory reels, housed in a reel-holder rack or on reel-holder jacks. Range of application With the D30H cable winding machines it is possible ...
The measuring and uncoiling machines type D30 are used when cables, conductors, etc. have to be uncoiled from original coils, reels on jacks or reels in racks and to be measured at the same time. The complete working process is carried ...
The whole automatic continual lines for the production of the durable pastries are designed and determined according to the particular type of required product. All the customer´s requirements are advised to be first consulted with ...
In the cooperation with Czech and international producers, we supply the complete production lines with forming equipment for producing croissants with or without filling. Complete standard line consists of the following equipment: • ...
Complete continual lines are intended for baking of various types of salted sticks from different sorts of doughs, lengths, diameters and with varied types of sprinkling. Complete standard line consists of the following equipment: • ...
The Spheroniser is equipped with an electrically heated hopper jacket or a hopper jacket that is heated by an external tempering device. It is designed for batch volumes of 5 to 250 grams. Different friction discs can be produced according ...
Application The pelletizer is used to directly granulate the extruded products after the conveyor / -cooling belt or the water bath. The speed of the strand feeding roll and the cutting knife can be adjusted seperatly. This allows ...
Granulator ECO The granulator was built to directly granulate the extruded products after the water bath or the conveyor belt. The granulate length can be adjusted by means of different cutting knifes or knife speeds. Due to gravitation ...
Ultra Micro Single Screw Pelletizing Line ULTRA MICRO SINGLE SCREW PELLETIZING LINE
Pouchmaking machine for the automatic production of flat and gusseted pouches for hospitals and the medical industry. To deliver maximum flexibility and cost-effectiveness, hawo has developed a fully automatic pouchmaking machine, ...
The tobacco industry uses MLT laser perforation systems for the offline and online perforation of cigarette filter tip paper. These are designed to enable cigarettes to be produced with reduced tar and nicotine values. The laser perforation ...
Fresh foodstuffs such as fruit and vegetables often have a long journey behind them before they reach the customer. Ensuring quality depends on the right packaging. The same applies to medical and chemical product packaging. The following ...
Laser online perforation. For online perforation in cigarette manufacture we offer customer-specific laser modules - both as initial equipment and retrofitting. For the tipping paper onlineperforation our modules can be retrofitted ...
• Ease of PVC sash frames hardware assembly. • Top and bottom shelves for hardwares. • Cuts double opening hardwares with requested measurements and screws them on frame. • Single opening espagnolette on door sashes can be mounted. • ...
KABAN MAKINA SANAYI VE TIC. LTD. STI
• Minimizes fatigue of operator. e.g. instead of turning 100 pieces of 20 kg. frames by hand every time by the help of desktop balls, 2.000 kg is carried by table. • Marking apparatus to position and assemble top and bottom hinges easily. • ...
KABAN MAKINA SANAYI VE TIC. LTD. STI
• Minimizes fatigue of operator. e.g. instead of turning 100 pieces of 20 kg. frames by hand every time by the help of desktop balls, 2.000 kg is carried by table. • Marking apparatus to position and assemble top and bottom hinges easily. • ...
KABAN MAKINA SANAYI VE TIC. LTD. STI
Punchline- Automatic paper perforating machine. Unique to Pathfinder, the Punchline machine is designed for use by manufacturers utilising Pathfinder automatic knife cutting technology. Perforated paper is often required as an underlay ...
Capacity: 500, 1,200, 2,000 kg/h
Motor power: 9, 18 kW
The BKG® Master-Line™ is our entry-level tempered water system with everything you need and nothing you don‘t. Cost-effectively produce high-quality pellets and benefit from various options to suit your process perfectly. Efficient ...
Nordson Polymer Processing Systems
Capacity: 5,000, 7,500, 11,500 kg/h
The highly automized BKG® Type AH D pelletizers for large throughputs provide cutting technology at its best. The precise, reproducible, and constant blade pressure actuation ensure a high-quality pellet, even for complex and demanding ...
Nordson Polymer Processing Systems
Capacity: 2,500, 7,500 kg/h
Motor power: 40, 60, 130 kW
The BKG® Optigon™ is our self-cleaning tempered water system for medium and high throughputs. Reach a new level of continuity with evolved filtration technology and produce high-quality pellets in a highly energy-efficient process. Efficient ...
Nordson Polymer Processing Systems
DeepBlue AI Lawn Mower integrates the independently developed DeepBlue Multimodal Navigation System (DMNS), along with RTK, INS, VIO, and other multimodal perception and positioning technologies to realize outdoor gardening. It provides ...
AP&T has been supplying productive and reliable production lines to household appliance manufacturers on a global basis for decades. Whether it is small-scale production or fully automated multi-press lines for large production volumes, ...
AP&T’s production lines provide us with a virtually unlimited range of possibilities for designing flexible solutions to suit all of our customers’ needs. In addition to short cycle times and high reliability, flexibility is a particularly ...
It is quicker, twice as energy efficient and requires significantly less maintenance than a conventional hydraulic press. AP&T’s new servohydraulic press is a "world first", and it creates entirely new conditions for increased productivity ...
Shirt Folding Stations with automatic Collar Former Maximum flexibility allows folding men’s, ladies’ and children’s shirts in various styles, qualities and fabrics. The height-adjustable folding station with its adjustable accessories, ...
Superior dual ram compression technology for producing the industry’s densest scrap pucks. PRAB’s Dualpak™ Briquetting Machines increase the value of metal chips, loose turnings and swarf by compressing them into near solid, dry briquettes ...
Capacity: 20 t/h
Motor power: 250, 315 kW
Made for maximum throughput THM Granulators know only one thing: throughput, throughput and more throughput. Their range of application is uniquely broad: Plastics Cable waste Household/commercial/industrial and bulky waste Aluminium ...
THM recycling solutions
Motor power: 22 kW
Created for demanding continuous use A prime example is the machine's rotor: forged and specially rolled, it is made for demanding continuous use even in the toughest working environment. The machine processes the following materials ...
THM recycling solutions
Motor power: 7,500 W
Sturdy rotor with block blades Small granulator for use with small throughput quantities. The range of applications includes: Metals Plastics Material composites Rubber Wood Printed circuit boards Metal chips Advantages Sturdy ...
THM recycling solutions
This machine is designed to apply the anti-reflective coating to the surface of crystalline silicon wafers to reduce reflection for its cell efficiency maximization. Spec High Throughput: 6,776 wafers/hr (640 wafers/boat) Cycle ...
HANWHA MACHINERY
This machine is designed to apply AlOx and SiNx layer to the rear side of wafers, which will enhance the recombination rate to increase its cell efficiency by minimizing the back-transmitted light and maximizing the light reflection. Spec High ...
HANWHA MACHINERY
This system is used for in-situ oxide and poly deposition for TOPCon cell which enables the selective capture of electrons by improving its recombination rate. Spec High Throughput: 4,702 wafers/hr (640 wafers/boat) Cycle Time: ...
HANWHA MACHINERY
Motor power: 11 kW - 37 kW
Rapid ThermoPRO for low noise granulation of skeletal waste. Available in 3 widths, 600, 900 and 1200 mm. • Open-Hearted design – direct access to the granulators heart in less than a minute, which simplifies cleaning and maintenance. ...
Rapid Granulator
Stand alone toothbrush tufting machine The Hepta is an economical, high speed tufting machine for toothbrushes: the filling tool is completely new and redesigned with an absolute minimum of parts and as good as no adjustments, so that ...
GB BOUCHERIE NV
Compact automatic toothbrush production line The HEPTA-FM machine is a high-speed filling machine with one filling tool, running up to 1000 tufts per minute. The HEPTA-FM/1200 runs up to 1200 tufts per minute. Both versions run ...
GB BOUCHERIE NV
Flexible toothbrush production line with 3 filling tools The TB33-Flexi toothbrush production cell is a combination of 3 Hepta filling units with one finishing unit FML-A2. The 4 units are connected by a flexible conveyor system. This ...
GB BOUCHERIE NV
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining