Other production machines

1,004 companies | 3,394 products
laminated tube production line
laminated tube production line
KLT 240

KLT 240 most advanced production tube line, using the latest Aisa technologies. The line is composed of a Body Maker (BM 240 Hiflex), a Header (PTH 240m) and a Capper (CM 240). Key benefits • Simple and very efficient production ...

See the other products
AISA
laminated tube production line
laminated tube production line
BM 240 Hiflex

most flexible fully automatic machine dedicated to the production of ABL or PBL laminate sleeves at a speed of up to 240 pieces per minute, with traditional overlap or edge welding side seam. Key benefits • Decoseam™ 360° decoration • ...

See the other products
AISA
laminated tube production line
laminated tube production line
SAESA®120

Fully automatic machine dedicated to the production of ABL or PBL laminate tubes at a speed of up to 120 tubes per minute, with traditional overlap side seam. Key benefits • Most affordable automatic laminate tube making machine ...

See the other products
AISA
dry strand pelletizer
dry strand pelletizer

YVROUD proposes pelleting lines with a capacity of a few kg and flow of 150 kg/h, for development or research applications: •Extruders with a diameter of 18 - 60 mm •Cooling trays in different lengths, with an optional cooler. •Granulators ...

paper perforating machine
paper perforating machine
Dynamic Perf 520-DP1

Dynamic Perf 520-DP1 The most important This Dynamic Punching unit is designed to work with paper without perforation in continuous line, in front of the new digital printers or devices that need the creation of horizontal and vertical ...

longitudinal perforating machine
longitudinal perforating machine
Punch Perf 520-PU1

Punching Module 520-PU1 is the solution for data centers that need tractors systems. Using Standard paper to produce the perforation in single or double production (two or four hole rings). You have the option to have marginal perforations ...

paper roll unwinding-rewinding machine
paper roll unwinding-rewinding machine
520-U1 / R1

Roll width: 200 mm - 520 mm

SPECIFICATIONS • Maximal speed: 200 m. min. • Roll diameter: 1320 mm (52”) • Web width: 200-520 mm • Pull strength: 400 N • Electrical specifications: 400/480V 3L+PE The modular Unwind 520-U1 and Rewind 520R1 generate full-line ...

calibration machine
calibration machine
Rotoles 400 PD-SV, Rotoles 600 PD-SV

double side calibrating milling machinesMachines with bottom and top rotors as well as feeding belts above and below, are used for calibration of very thin workpieces, such as hardwood top layers for production of engineered flooring.

See the other products
Ledinek
calibration machine
calibration machine
Rotoles 400 D-S, Rotoles 600 D-S

one side calibrating milling machinesMachines with a top rotor and feeding belt below are used for calibration of very thin workpieces, such as hardwood top layers for production of engineered flooring.

See the other products
Ledinek
calibration machine
calibration machine
Rotoles 1300 D, Rotoles 1300 PD-V

wide calibrating milling machinesMachine with top rotor and bottom feeding belt and machine with bottom and top rotor as well as top and bottom feeding belts are used for calibration of wide glued panels or other different engineered products.

See the other products
Ledinek
profile production line
profile production line

1.Drawing of the profile of the silo panel: (Machine can be customized according to your needs, the following picture is the drawing provided by our customer, for reference only.) 3.Working process of the production line: Hydraulic ...

See the other products
Thomas Machinery Manufacturing Co. Ltd.
profile making machine
profile making machine

Silo corrugated panel machines have been recognized for their robust design, a variety of pre or post eut options, mechanical or hydraulic press system designs. They are reliable and accurate. Available destacking, stacking, and curving ...

See the other products
Thomas Machinery Manufacturing Co. Ltd.
profile making machine
profile making machine

Silo Silo upright production line : Storage silo manufacturers know that punch accuracy and minimal flare are critical in Silo column , and so do we. That's why we offer a variety of robust, accurate silo post line solutions to handle ...

See the other products
Thomas Machinery Manufacturing Co. Ltd.
sheet metal production line
sheet metal production line
PHE

PHE’s Plates Forming Production Line The production line is widely used for forming large type of sheet metal, such as heat exchanger plate. It is mainly composed of YR27 Sheet forming hydraulic press, YS26 hydraulic punching/trim press, ...

See the other products
SYHP
hydraulic press
hydraulic press
YR27 3500

Force: 3,500, 4,000, 6,000, 8,000 tf

YR27 3500/4000/6000/8000 TON PTFE Moulding Sheet Hydraulic Press PTFE powder is compressed in sheet forming by hydraulic press. And then sintered in hot air ovens. The machine is mainly used for powder compressed such as PTFE/Teflon ...

See the other products
SYHP
hydraulic press
hydraulic press
YS51

The YS51-Vulcanizing Hydraulic press is used for heat exchanger gaskets production. The structure of the machine is frame structure, with the cylinder on bottom. The machine has independent hydraulic system and PLC electric control system. ...

See the other products
SYHP
lipstik production machine
lipstik production machine
SM LABO

Laboratory machine to produce lipsticks in a laboratory by soft mould technology. 2 versions available with or without doser with 2 nozzles and melting tank (1 liter). Heating system by infrared short wave (patented), for 4 lipsticks Temperature ...

laser micropipette puller
laser micropipette puller
P-2000 series

P-2000 Laser Based Micropipette Puller The P-2000 micropipette puller represents a significant advance in the technology of fabrication of micropipettes, optical fiber probes, and nanospray tips. The P-2000 integrates a CO2 laser-based ...

See the other products
SUTTER INSTRUMENT
micropipette puller
micropipette puller
P-1000

Developed through years of experience with the Flaming/Brown style micropipette pullers and infused with leading edge technology, Sutter is proud to introduce the P-1000 micropipette puller. The most obvious new feature is the color touchscreen ...

See the other products
SUTTER INSTRUMENT
Flaming/Brown micropipette puller
Flaming/Brown micropipette puller
P-97

The P-97 Flaming/Brown type micropipette puller is ideal for fabricating micropipettes, patch pipettes and microinjection needles. While retaining many of the features of earlier models, the P-97 offers improvements in mechanical, electronic ...

See the other products
SUTTER INSTRUMENT
manual coiler-uncoiler
manual coiler-uncoiler
R41H

Manual cable winding device type R41, brand LOIMEX, to measure and make coils of cable with the coiler unit, which the core and front crosspiece being articulated for the quick extraction of the cable, due to the decrease of the inside ...

manual coiler-uncoiler
manual coiler-uncoiler
D30H

Manual cable winding machine, type D30H, they are only used to make rolls, either from original factory reels, housed in a reel-holder rack or on reel-holder jacks. Range of application With the D30H cable winding machines it is possible ...

cable coiler-uncoiler
cable coiler-uncoiler
D30

The measuring and uncoiling machines type D30 are used when cables, conductors, etc. have to be uncoiled from original coils, reels on jacks or reels in racks and to be measured at the same time. The complete working process is carried ...

dough production line
dough production line

The whole automatic continual lines for the production of the durable pastries are designed and determined according to the particular type of required product. All the customer´s requirements are advised to be first consulted with ...

croissant production line
croissant production line

In the cooperation with Czech and international producers, we supply the complete production lines with forming equipment for producing croissants with or without filling. Complete standard line consists of the following equipment: • ...

salted sticks production line
salted sticks production line

Complete continual lines are intended for baking of various types of salted sticks from different sorts of doughs, lengths, diameters and with varied types of sprinkling. Complete standard line consists of the following equipment: • ...

spheronizer
spheronizer

The Spheroniser is equipped with an electrically heated hopper jacket or a hopper jacket that is heated by an external tempering device. It is designed for batch volumes of 5 to 250 grams. Different friction discs can be produced according ...

laboratory granulator
laboratory granulator
HMI

Application The pelletizer is used to directly granulate the extruded products after the conveyor / -cooling belt or the water bath. The speed of the strand feeding roll and the cutting knife can be adjusted seperatly. This allows ...

dry granulator
dry granulator

Granulator ECO The granulator was built to directly granulate the extruded products after the water bath or the conveyor belt. The granulate length can be adjusted by means of different cutting knifes or knife speeds. Due to gravitation ...

twin-screw pelletizing system
twin-screw pelletizing system

Ultra Micro Single Screw Pelletizing Line ULTRA MICRO SINGLE SCREW PELLETIZING LINE

plastic bag making machine
plastic bag making machine
hm 8000 AS, hm 8000 AS-V SealCut

Pouchmaking machine for the automatic production of flat and gusseted pouches for hospitals and the medical industry. To deliver maximum flexibility and cost-effectiveness, hawo has developed a fully automatic pouchmaking machine, ...

laser perforating machine
laser perforating machine
MLP-5

The tobacco industry uses MLT laser perforation systems for the offline and online perforation of cigarette filter tip paper. These are designed to enable cigarettes to be produced with reduced tar and nicotine values. The laser perforation ...

perforating machine for the packaging industry
perforating machine for the packaging industry
MLS-G Series

Fresh foodstuffs such as fruit and vegetables often have a long journey behind them before they reach the customer. Ensuring quality depends on the right packaging. The same applies to medical and chemical product packaging. The following ...

laser perforating machine
laser perforating machine
MLP-M

Laser online perforation. For online perforation in cigarette manufacture we offer customer-specific laser modules - both as initial equipment and retrofitting. For the tipping paper onlineperforation our modules can be retrofitted ...

sash assembly bench
sash assembly bench
EK 1040

• Ease of PVC sash frames hardware assembly. • Top and bottom shelves for hardwares. • Cuts double opening hardwares with requested measurements and screws them on frame. • Single opening espagnolette on door sashes can be mounted. • ...

See the other products
KABAN MAKINA SANAYI VE TIC. LTD. STI
PVC windows and door assembly bench
PVC windows and door assembly bench
RC 1010

• Minimizes fatigue of operator. e.g. instead of turning 100 pieces of 20 kg. frames by hand every time by the help of desktop balls, 2.000 kg is carried by table. • Marking apparatus to position and assemble top and bottom hinges easily. • ...

See the other products
KABAN MAKINA SANAYI VE TIC. LTD. STI
PVC windows and door assembly bench
PVC windows and door assembly bench
RC 2010

• Minimizes fatigue of operator. e.g. instead of turning 100 pieces of 20 kg. frames by hand every time by the help of desktop balls, 2.000 kg is carried by table. • Marking apparatus to position and assemble top and bottom hinges easily. • ...

See the other products
KABAN MAKINA SANAYI VE TIC. LTD. STI
perforating machine for the textile industry
perforating machine for the textile industry
Punchline®

Punchline- Automatic paper perforating machine. Unique to Pathfinder, the Punchline machine is designed for use by manufacturers utilising Pathfinder automatic knife cutting technology. Perforated paper is often required as an underlay ...

underwater pelletizer
underwater pelletizer
BKG® Master-Line™

Capacity: 500, 1,200, 2,000 kg/h
Motor power: 9, 18 kW

The BKG® Master-Line™ is our entry-level tempered water system with everything you need and nothing you don‘t. Cost-effectively produce high-quality pellets and benefit from various options to suit your process perfectly. Efficient ...

See the other products
Nordson Polymer Processing Systems
underwater pelletizer
underwater pelletizer
BKG® Type AH D

Capacity: 5,000, 7,500, 11,500 kg/h

The highly automized BKG® Type AH D pelletizers for large throughputs provide cutting technology at its best. The precise, reproducible, and constant blade pressure actuation ensure a high-quality pellet, even for complex and demanding ...

See the other products
Nordson Polymer Processing Systems
underwater pelletizer
underwater pelletizer
BKG® Optigon™

Capacity: 2,500, 7,500 kg/h
Motor power: 40, 60, 130 kW

The BKG® Optigon™ is our self-cleaning tempered water system for medium and high throughputs. Reach a new level of continuity with evolved filtration technology and produce high-quality pellets in a highly energy-efficient process. Efficient ...

See the other products
Nordson Polymer Processing Systems
AGV lawn mower
AGV lawn mower
Premium

DeepBlue AI Lawn Mower integrates the independently developed DeepBlue Multimodal Navigation System (DMNS), along with RTK, INS, VIO, and other multimodal perception and positioning technologies to realize outdoor gardening. It provides ...

automated production line
automated production line

AP&T has been supplying productive and reliable production lines to household appliance manufacturers on a global basis for decades. Whether it is small-scale production or fully automated multi-press lines for large production volumes, ...

automatic production line
automatic production line

AP&T’s production lines provide us with a virtually unlimited range of possibilities for designing flexible solutions to suit all of our customers’ needs. In addition to short cycle times and high reliability, flexibility is a particularly ...

servo-hydraulic press
servo-hydraulic press

It is quicker, twice as energy efficient and requires significantly less maintenance than a conventional hydraulic press. AP&T’s new servohydraulic press is a "world first", and it creates entirely new conditions for increased productivity ...

fabric folding machine
fabric folding machine
FS 20

Shirt Folding Stations with automatic Collar Former Maximum flexibility allows folding men’s, ladies’ and children’s shirts in various styles, qualities and fabrics. The height-adjustable folding station with its adjustable accessories, ...

metal chip briquette press
metal chip briquette press
DUALPAK™

Superior dual ram compression technology for producing the industry’s densest scrap pucks. PRAB’s Dualpak™ Briquetting Machines increase the value of metal chips, loose turnings and swarf by compressing them into near solid, dry briquettes ...

rotor granulator
rotor granulator
AG Series

Capacity: 20 t/h
Motor power: 250, 315 kW

Made for maximum throughput THM Granulators know only one thing: throughput, throughput and more throughput. Their range of application is uniquely broad: Plastics Cable waste Household/commercial/industrial and bulky waste Aluminium ...

See the other products
THM recycling solutions
rotor granulator
rotor granulator
XG

Motor power: 22 kW

Created for demanding continuous use A prime example is the machine's rotor: forged and specially rolled, it is made for demanding continuous use even in the toughest working environment. The machine processes the following materials ...

See the other products
THM recycling solutions
rotor granulator
rotor granulator
ZM300

Motor power: 7,500 W

Sturdy rotor with block blades Small granulator for use with small throughput quantities. The range of applications includes: Metals Plastics Material composites Rubber Wood Printed circuit boards Metal chips Advantages Sturdy ...

See the other products
THM recycling solutions
automatic coating machine
automatic coating machine
PECVD (SiNx)

This machine is designed to apply the anti-reflective coating to the surface of crystalline silicon wafers to reduce reflection for its cell efficiency maximization. Spec High Throughput: 6,776 wafers/hr (640 wafers/boat) Cycle ...

See the other products
HANWHA MACHINERY
automatic coating machine
automatic coating machine
T-AlOx (AlOx + SiNx)

This machine is designed to apply AlOx and SiNx layer to the rear side of wafers, which will enhance the recombination rate to increase its cell efficiency by minimizing the back-transmitted light and maximizing the light reflection. Spec High ...

See the other products
HANWHA MACHINERY
deposition machine
deposition machine
T-aSi (Oxidation + a-Si)

This system is used for in-situ oxide and poly deposition for TOPCon cell which enables the selective capture of electrons by improving its recombination rate. Spec High Throughput: 4,702 wafers/hr (640 wafers/boat) Cycle Time: ...

See the other products
HANWHA MACHINERY
rotor granulator
rotor granulator
ThermoPRO

Motor power: 11 kW - 37 kW

Rapid ThermoPRO for low noise granulation of skeletal waste. Available in 3 widths, 600, 900 and 1200 mm. • Open-Hearted design – direct access to the granulators heart in less than a minute, which simplifies cleaning and maintenance. ...

See the other products
Rapid Granulator
dental brush production line
dental brush production line
HEPTA

Stand alone toothbrush tufting machine The Hepta is an economical, high speed tufting machine for toothbrushes: the filling tool is completely new and redesigned with an absolute minimum of parts and as good as no adjustments, so that ...

See the other products
GB BOUCHERIE NV
dental brush production line
dental brush production line
HEPTA-FM

Compact automatic toothbrush production line The HEPTA-FM machine is a high-speed filling machine with one filling tool, running up to 1000 tufts per minute. The HEPTA-FM/1200 runs up to 1200 tufts per minute. Both versions run ...

See the other products
GB BOUCHERIE NV
dental brush production line
dental brush production line
TB33/Flexi

Flexible toothbrush production line with 3 filling tools The TB33-Flexi toothbrush production cell is a combination of 3 Hepta filling units with one finishing unit FML-A2. The 4 units are connected by a flexible conveyor system. This ...

See the other products
GB BOUCHERIE NV
exhibit your products

& reach your clients in one place, all year round

Exhibit with us