|
|
| These burners provide close coupling of radiant heat sources for use in "line" arrangements where relatively "light" heating jobs are to be performed. Designed essentially for heating moving webs, line burners also find frequent application in ovens, as well as in heating stationary objects. The 500 Series is available in a variety of cup configurations to permit several self-piloting geometric arrangements. The small 200 Series and large 700 Series, however, are currently available for straightline use only. |
|
The Eclipse Minnox burner utilizes a premixed gas/air mixture with excess air; the resulting low flame temperature of 1200°C (2200°F) produces extremely low NOx discharge from the burner head. A modular designed gas/air mixer is adapted to the burner manifold in various configurations.
The flame is protected by a stainless steel shroud which insures good combustion without being influenced by process air. Burner capacities are available from 125 to 4000 kW (430,000 to 13.6 million Btu/hr.); higher capacities can be designed for special applications.
|
|
M-PAKT® Ultra low NOx
M-PAKT Ultra low NOx Burner provides the world's lowest levels of NOx and CO while maintaining typical MAXON quality and reliability. In most applications, NOx is typically < 9 ppm while CO is maintained < 20 ppm. The M-PAKT industrial burner is suitable for air heating for ovens and dryers for paint finishing, paper making, textile production, food baking, grain drying, and make-up air heating. With optional sleeve materials, M-PAKT substantially reduces emissions in incinerators, oxidizers, heat exchangers and process heaters.
|
|
MAXON CROSSFIRE® Low NOx Burners comply to the world's toughest air quality standards for NOx and CO by cleanly combusting gaseous fuels. CROSSFIRE® Burners are nozzle-mixing, modular line burners designed for a variety of fresh and re-circulated industrial air process heating applications. The low NOx burner is available in straight, grid, and insert cartridge sections which are used to spread heat across your duct for very uniform temperature distributions.
The CROSSFIRE® Burner can be designed within a system to allow for up to 2,500,000 BTU/hr/ft while producing extremely low emissions of both NOx and CO. You can combine CROSSFIRE® Low NOx Burners with Smartfire® Intelligent Combustion Controls for optimal control of emissions and efficiency.
|
|
The Axiflo 6000 range of highly efficient, low excess air
burners have been developed for the process and
petrochemical industries.
Designed for use in applications that require forced draught
fire heaters, the Axiflo 6000 provides reliable, high efficiency
combustion with a wide turndown capability. |
|
| The CYCLOMAX® Low NOx Burner provides clean combustion with NOx emission levels below 25 ppm and CO levels less than 75 ppm. Lower emissions may be possible based on application. The integral fan version of this industrial burner is available in 5 sizes (up to 3,700,000 Btu/hr) and the EBMRV version is available in 4 sizes (up to 7,400,000 Btu/hr). |
|
| Selas low NOx flat flame wall burners are ideal for fiber or brick furnace settings. They install quickly and easily into new equipment and are cost-effective retrofits for existing furnaces. Our low NOx burners meet the strict nitrogen oxide requirements of the petrochemical industry. |
|
| MAXON Series "NP" and "RG" AIRFLO® Industrial Burners provide clean, direct fired air heating to optimize process air heating efficiency. The modular natural gas burners install easily with custom built patterns to fit your duct. NP and RG burners burn cleanly with most gaseous fuels and offer high heat releases per foot with wide turndown ratios. |
|
The ThermJet is a nozzle-mix burner designed to fire an intense stream of hot gases through a combustor using combustion air temps up to 600° F. (315° C.)
The high velocity of the gases improves temperature uniformity, product quality and system efficiency.
The TJ burner comes in two types: High Velocity (HV) and Medium Velocity (MV)
The gas velocity can be as high as 500 ft/s (150 m/s) for the HV, and 250 ft/s (75 m/s)for the MV.
|
|
| The MAXON VALUPAK® gas burner provides a convenient, packaged solution for direct fired heating applications in ovens and dryers. The burner fires cleanly into applications with balanced pressure where high turndown of over 40:1 is required for precise temperature control. Durable steel construction provides years of reliable service. VALUPAK® is available in wide variety of packaged forms to suit your application for a bolt-on solution. |
|
Selas nozzle mix burners offer many advantages over typical flame-type burners. They are designed to thoroughly mix combustion air and fuel gas at the nozzle so that it can burn quickly and completely. Combustion occurs within the nozzle, so the heat exiting from the nozzle cup is uniform, stable and highly controlled. This rapid combustion creates a quick release heat, radiated from fully reacted gases that are closer to a theoretical flame temperature, but with no danger of flame impingement on the workpiece.
Selas nozzle mix burners are ideal for smaller furnaces. Since there is no chance of flame impingement, the distance from the burner to the workpiece is shorter. You'll also save money on fuel costs with Selas nozzle mix burners because they require less air to fuel combustion. |
|
| MAXON APX® Natural Gas Burners are packaged nozzle mixing line burners designed for fresh or low temperature re-circulated air heating applications. The APX® Industrial Burner is a value engineered design utilizing a single aluminum extrusion for both its air and fuel manifolds. Its single-piece, joint-less body design provides standard straight gas burners up to 40 feet, H-shaped burners, and grid shaped burners engineered to your specification. APX® burner construction provides years of maintenance free operation and lower cost of ownership than any other alternative. |
|
Combustion Tec offers a full line of industry proven oxy fuel burners & accessories to the glass and high temperature metals markets.
* Extended fuel firing capacity
* Increased melter efficiency
* Reduced emissions
* Reduced melting costs
* Improved refractory life
* Greater flexibility
|
|
OXY-THERM® Natural Gas Burners eliminate the need for costly combustion air pre-heaters, regenerators or recuperators and provide clean combustion with low NOx levels. OXY-THERM® Gas Burners use oxygen for the combustion reaction, removing atmospheric nitrogen as a source for NOx creation. OXY-THERM® burns any gaseous fuel or oil including low BTU off gases and waste oils. No other oxy industrial burner has as many installations or as much proven time in reliable production.
|
|
| Selas pre-mix gas burners encompass many styles including duradiant, superheat, PRS, multi-port PR, refrak, ribbon, anti-involution, and EG. They bring versatility, control and stability to a host of applications from soldering, high temperature brazing and glass polishing, to ink or textile drying, air heating and annealing/tempering. All of our pre-mix burner types are designed to offer long service life over a wide operating range. |
|
Safely supplying pressurized fuel to industrial burners demands attention to detail, quality components and professional engineering. Maxon fuel trains and supply skids assure your installation of trouble free operation in professionally built packages.
For gas and oil burners, Maxon fuel trains may be standard built or custom-built including :
Designs to comply with industry' most rigorous demands
Construction to meet local safety standards & directives for your area
Components selected for best performance and minimum maintenance
Leak- and function-tested prior to shipment for quality assurance
Accompanying required certificates where required for smooth hand-over on site |
|
Designed for worldwide acceptability and made to the highest
engineering standards allied to proven technology, all burners
comply with the requirements of British Standard 799, Part 2: 1972
and British Standard 5885, Part 1:1988.
All burners offer maximum combustion efficiencies
with minimum pollution levels.
As exhaust emissions are dependent on fuel and
furnace design, as well as that of the burner,
compliance with existing and proposed European
directives has easily been achieved when firing |
|
| The Fx4 can be programmed to meet any function required by the OEM. It can also be supplied to work with any voltage ranging from 5V AC/DC to 240V AC. If you have a requirement that is not covered by any our standard products, please complete our ICS form. |
|
MAXON's UNI-RAD® Radient Tube Burner produces an extremely stable and luminous flame that maximizes heat transfer throughout radient tube furnaces. Flame ignition is maintained by a patented continuous spark system that ensures ignition each and every time without fragile, porcelain ignitors. This patented ignition system enables UNI-RAD® to pulse fire radiant tubes producing longer tube lives for reduced furnace ownership expense.
Options are available to operate with preheated combustion air to 1200°F (650°C) to reduce your fuel consumption and operational expenses.
|
|
| The petrochemical industry has many uses for our burners and technology. Selas burners can be found in numerous applications in many locations, including refineries, plastics manufacturing, chemical processing plants and textile plants, among others. We design our burners to meet many application requirements such as low NOx, ultra low NOx, nozzle mix and more. We understand that there are many different sizes and shapes of thermal applications and equipment so we offer burners that can be mounted on the floor, wall or ceiling. Furthermore, our burners are available for the wide variety of fuel gases that the petrochemical industry uses. |
|
| RADMAX® Radient Low NOx Burners are designed to deliver uniform, high intensity radiant energy for moisture removal in textile and paper ovens, paint drying, and powder coating, as well as many pre-heat, plastic forming, heat treating and annealing operations. With innovative ceramic or metal foam tiles, the RADMAX® natural gas burner produces low to Ultra-Low NOx and CO levels for a wide variety of industrial gas burner applications. |
|
SBM proposes a wide range of infrared gas burners
- stainless steel construction
- instant heat
- long life ceramics
for following applications :
- rotisseries
- doner kebab
- baking ovens
- drying ovens, … |
|
The MAXON TUBE-O THERM® burner-to-tube direct firing system provides uniform heat transfer, eliminates "hot spots", and produces faster bring-up times than all other tube burners. This industrial burner fires directly into smaller-bore, less expensive tubes and burns butane, , propane or natural gas with reduced levels of NOx and CO.
TUBE-O THERM® gas burners ensure improved performance for industrial washers, dip tanks, water-bath heaters, and solution tanks. |
|
| Eclipse Model SER Single Ended Recuperative burners incorporate the components of a tube firing burner system in a compact package. The SER burner is a nozzle mixing burner and recuperator coaxially mounted inside a single-ended radiant tube. Combustion air entering the SER burner is preheated in the recuperative section by exhaust gases providing higher efficiencies than stand alone burners. SER burners are available in four diameters from 3-1/4" to 7-1/2". Radiant tube length is tailored to the application. |
|
Selas Low NOx burners satisfy the worldwide regulation for low NOx emission with nitrogen oxide emission of less than 50 ppmv ( 1000 mg/Nm3). The fuel air mixture flows from the tip of the burner parallel to the hot face of the furnace wall. The mixture ignites and completes its combustion as it spreads over the wall, bringing it to a uniform temperature. No flames impinge on the process tubes. This lowers maintenance costs since the uniform tube temperature increases process tube life and decreases coking. Burner blocks are not needed to use with these burners and they are easy to light, retrofit and maintain. Silencers and other accessories are available for Selas Low NOx burners.
FEATURES & BENEFITS:
Capacity: 1,500,000 BTU/hour
Pressure: 20 psig
Draft: 0.2” WC
Oxygen: 2%
CO: 5 ppm
NOx: As low as 12 ppm |
|
Compliance with international emission
standards can be guaranteed prior to
installation by assessing individual site
requirements, carefully incorporating
parameters like furnace heat release
rates, combustion air pre-heat and fuel
quality such as nitrogen and residue
values.
With installations throughout the world
ranging from 5 MWth to 700 MWth,
Hamworthy Combustion Engineering has
a commitment to maintain its reputation
for market leading burners, associated
systems and equipment |
|
|
|
Burners, Accessories
