|
|
SBM proposes a wide range of infrared gas burners
- stainless steel construction
- instant heat
- long life ceramics
for following applications :
- rotisseries
- doner kebab
- baking ovens
- drying ovens, … |
|
The MAXON TUBE-O THERM® burner-to-tube direct firing system provides uniform heat transfer, eliminates "hot spots", and produces faster bring-up times than all other tube burners. This industrial burner fires directly into smaller-bore, less expensive tubes and burns butane, , propane or natural gas with reduced levels of NOx and CO.
TUBE-O THERM® gas burners ensure improved performance for industrial washers, dip tanks, water-bath heaters, and solution tanks.
|
|
| Eclipse Model SER Single Ended Recuperative burners incorporate the components of a tube firing burner system in a compact package. The SER burner is a nozzle mixing burner and recuperator coaxially mounted inside a single-ended radiant tube. Combustion air entering the SER burner is preheated in the recuperative section by exhaust gases providing higher efficiencies than stand alone burners. SER burners are available in four diameters from 3-1/4" to 7-1/2". Radiant tube length is tailored to the application. |
|
Selas Low NOx burners satisfy the worldwide regulation for low NOx emission with nitrogen oxide emission of less than 50 ppmv ( 1000 mg/Nm3). The fuel air mixture flows from the tip of the burner parallel to the hot face of the furnace wall. The mixture ignites and completes its combustion as it spreads over the wall, bringing it to a uniform temperature. No flames impinge on the process tubes. This lowers maintenance costs since the uniform tube temperature increases process tube life and decreases coking. Burner blocks are not needed to use with these burners and they are easy to light, retrofit and maintain. Silencers and other accessories are available for Selas Low NOx burners.
FEATURES & BENEFITS:
Capacity: 1,500,000 BTU/hour
Pressure: 20 psig
Draft: 0.2” WC
Oxygen: 2%
CO: 5 ppm
NOx: As low as 12 ppm |
|
Compliance with international emission
standards can be guaranteed prior to
installation by assessing individual site
requirements, carefully incorporating
parameters like furnace heat release
rates, combustion air pre-heat and fuel
quality such as nitrogen and residue
values.
With installations throughout the world
ranging from 5 MWth to 700 MWth,
Hamworthy Combustion Engineering has
a commitment to maintain its reputation
for market leading burners, associated
systems and equipment |
|
Hamworthy Combustion Engineering's ELECTROtec Rotary
Cup burner is a product designed to incorporate state of the
art combustion technology - offering significant performance
enhancements over any other non-volumetric oil metering
burner.
The ELECTROtec offers an integral volumetric electronic
liquid fuel management system and electronic air/fuel ratio
control - ensuring optimum combustion efficiency for the
most demanding operational requirement while minimising
energy use and maintenance costs. |
|
The ThermThief’s unique nozzle creates an intense, adjustable length flame with a vigorous spinning action. The flame scrubs the inside of the fire tubes to remove the gas film boundary layer and increase heat transfer effectiveness with outstanding temperature uniformity. Not only does this contribute to longer tube life, it also ensures consistently uniform product processing.
ThermThief delivers these additional benefits:
Low NOx and low CO.
Low excess air capability for high efficiency.
Low air and gas pressure requirements.
High heat transfer at low noise levels.
Reliable ignition at a wide range of firing rates.
|
|
TUBE-O-FLAME®
MAXON's TUBE-O-FLAME® industrial burners provide clean, low NOx heating for tube firing. The TUBE-O-FLAME® burns most fuel gases inside an array of tubes to provide reduced fuel consumption and better process response. The low horsepower requirements reduce operating costs, and produce clean combustion with outstanding reliability.
TUBE-O-FLAME® natural gas burners ensure improved performance for industrial washers, dip tanks, water-bath heaters, solution tanks, and asphalt tanks.
|
|
Low NOx Burners
SLS™ Technology
MAXON Corporation believes in responsible, intelligent use of energy to produce a better quality of life for everyone, worldwide. We invest in developing innovative technology and the best combustion minds to deliver clean, efficient solutions for our customers. MAXON products feature robust technology, delivered in a practical way, because it's the responsible thing to do for the environment and the population.
SLS™ Technology reduces NOx in industrial burners by reducing prompt NOx formation in the reacting flow field. This advanced technology is an innovative method to merge stabilized, lean premix technology with flexible nozzle mix advantages. Covered by two US patents, the SLS™ Technology in MAXON products produces extremely low emission of NOx and CO without sacrificing performance or reliability. Look for the SLS™ tag on MAXON burners like the M-PAKT™ Ultra Low Emission Burner.
|
|
The self-checking RUBY PACKSCAN flame detectors are mainly designed for monitoring gas burners.
They transmit a binary safety signal on the presence or absence of a flame.
The response time to a flame shutdown is less than 1 second, as per Standard EN298 relating to gas safety equipment.
The RUBY PACKSCAN detector uses a detection tube for ultraviolet wavelengths between 185 and 280nm.
An auto-checking mechanism for the tube covers the sight hole three times per second in order to ensure self checking operation.
A display enables visualisation of the configured parameters as well as the level of detection.
30 years in the field of flame detection gives the RUBY PACKSCAN the following advantages :
• an ‘all in one concept’ with an integrated amplifier in the scanner head for easy installation
• two microprocessors for increased safety and reliability
• Approved by APAVE meeting all safety criteria requirements.
• Detection level indicator to simplify commissioning
• Various standard confi guration methods by internal switches, by
remote and serial link to simplify configuration.
• DPDT output switch to indicate flame presence and proper detector operation. |
|
| ... products without technical information |
| |
|
|
Burners, Accessories
