|
|
| GEA FlatPlate manufactures a full line of refrigeration, hydronic heating and industrial process heat exchangers. Our technology and manufacturing capabilities are state of the art, with an emphasis on providing leadership in brazed plate technology and excellence in customer service. GEA FlatPlate is dedicated to be a premier company in the industry. |
|
| Koolant Koolers Heat Exchanger Packages cool indirectly, meaning that your process fluid is never touched by a chiller. Many acid, water, oil and hydraulic fluids are cooled in this way - with the cool side being supplied by a chiller, tower water or even city water. These units can be fitted with our pumps or yours, and configured with exacting controls to hold your temperatures constant. |
|
SIGMATHERM
Ideal for the pasteurisation prior to sterile packing or storing of beverages and liquid foods such as: juices, beer, milk, sauces, fruit and vegetable purees, tomato paste, jams and jellies, applesauce, egg products.
Process plants with SIGMA plate heat exchangers or SIGMAFLOW heat exchangers for viscous, pasty, pulpy and particulate liquid foods have heat recovery capability up to 96%.
High temperature short time heating systems can be used for the cold packaging of food products in sterile containers via aseptic fillers into packages or barrels.
|
|
Sentry Equipment manufactures a wide variety of sample coolers to meet any need. Flows from 1 to 4500 l/hr; Pressures up to 690 bar; temperatures up to 815 deg. C.
Stainless Steel, Copper and a wide variety of exotic alloys available. |
|
For more than 25 years, Allegheny Bradford Corporation has been recognized as the global leader in high purity stainless steel process equipment. We have built a reputation for quality in the design and manufacture of stainless steel shell and tube heat exchangers for pharmaceutical, biotechnology and other ultra-pure industries. As the recognized leader in the industry, we offer today's most advanced stainless steel processing technology, along with a team of dedicated professionals who are committed to providing you with products that deliver unparalleled performance and dependability, along with the responsive customer service you need.
When it comes to heat exchangers, ABC sets the industry standard. Quality is the cornerstone of our heat exchangers from start to finish. Our enineering specialists work closely with you to custom design the most efficient, cost effective heat exchanger for your thermal transfer requirements. From the documentation of raw materials in compliance with ASME BPE codes, to the precision CNC machining of tubesheets and bonnets, to final finishing, testing and documentation, Allegheny Bradford Heat Exchangers are manufactured to deliver superior performance and trouble-free operation, even in the most demanding ultra-pure processing environments. Allegheny Bradford Corporation custom designs every heat exchanger specifically to meet your exacting application requirements. Specially designed computer software combines fluid dynamics, thermophysical properties, thermodynamics and actual empirical data to ensure your shell and tube heat exchanger design is perfect for your application. |
|
APV VT+
APV scraped surface heat exchangers (SSHE) consist of a jacketed cylinder with a rotating dasher holding rows of scraper blades. The product is pumped through the cylinder while the heating or cooling medium is circulated between the cylinder and the jacket. The medium can be steam, water or a refrigerant such as ammonia or freon.
Ideal for Dairy and Food applications the APV VT+ is designed to heat, sterilise and cool products containing particles up to 30 mm or products with high viscosity. The APV VT+ has a number of advantages:
* Capable of handling products with large particles
* Best solution for treatment of viscous and heat sensitive products
* Suitable for aseptic operation
* EHEDG tested and approved
* Long running time between CIP when processing heat sensitive products |
|
For more than 60 years, Votator scraped surface heat exchangers have been replacing slow, inefficient batching operations with more uniform, controllable and repeatable continuous processing. The Votator II incorporates the most popular features of the Thermutator and Votator lines, making it extremely easy to maintain.
Typical applications are heating and cooling cheese sauce, pudding, caramel, deboned meat, pet food, and fruit products.
- 3A, ASME, and PED Certified
- One-Piece Mechanical Seal
- Fewer parts allow for easier maintenance
- 100% PEEK™ - no filler or insert - provides longer life and no stress separation
- Can be used on any heat transfer tube, with any product at most process temperatures
- FDA compliant
- Integral Gear Motor Drive
- Gear drive is directly coupled to the mutator shaft eliminating the need for a secondary drive shaft and bearing block
- Overall length of heat exchanger is reduced by 20 - 25%
- Easy to maintain and self-aligning
- Available with up to 30 horsepower for handling the most viscous products
- Removable Heat Transfer Tube
- Can be serviced without disturbing the utility piping or the drive motor
- Units are available with up to 11 sq ft of heat transfer area (6 X 84)
|
|
Plate Heat Exchangers
Soldered and bolted plate heat exchanger
- PWT
- TL
Up to 30 bar oil pressure and from 25 to 3 000 l/min. oil flow. Operating temperature from -100 to +195 degrees. Soldered plate coolers are available from 10 - 200 plates. Bolted plate coolers are highly flexible and easy to clean thanks to the modular system. |
|
The designations "REKUGAVO" and "REKULUVO" describe two highly efficient, fully welded plate heat exchangers for gaseous products, working according to the countercurrent principle. This system allows achieving very high heat recovery rates in an economically efficient manner.
The heat transfer surfaces consist of two profiled plates with a high specific capacity which are assembled into self-supporting packs. Both gases flow through the plates in countercurrent and are separated from each other without leakage. Mixing of the two gas streams and a possible transfer of pollutants is thus almost completely excluded
The REKULUVO (from German "Rekuperativer Luftvorwärmer", i.e. "Recuparative air pre-heater") is particularly suitable for pre-heating the combustion air in petrochemical plants (fired heaters) or in methanol and ammonia plants.
The REKUGAVO (from German "Rekuperativer Gasvorwärmer", i.e. "Recuperative gas pre-heater") is the perfect heat exchanger for heating up flue gas to the catalyst reaction temperature, e.g. in denitration units of refuse incinerating plants.
Depending on requirements, the recuperative heat exchanger can have single- or double-stage design. The hoods provided below and above the heat exchanger packs serve for feeding and discharging and/or for combining the individual volumetric flows from the gases connected in parallel. The hoods can be designed as required, with the products always flowing vertically between the plates, making cleaning much easier.
Technical data:
Products: air or flue gas
Volumetric flows: 5,000 m3/hr min., 2,000,000 m3/hr max.
Temperature: up to 600 °C max.
Pressure range: atmospheric /- 200 mbar
Recovery rate: up to 97 %
Materials: ferritic and austenitic |
|
APV ParaWeld
The APV ParaWeld is a range of laser-welded plate pairs for refrigerant and chemical processing and a logical alternative to shell and tube and all welded pates. The pairs are particularly suitable for evaporation and condensing of refrigerants such as ammonia and Freon, as well as chemical and general process duties involving aggressive liquids that would attack conventional gaskets.
The APV ParaWeld consists of plates welded in pairs using a patented laser-welding process. Each second channel is secured by a welding, and the other channels by gaskets.
Materials:
Plates: AISI 316, AISI 304, Titanium, C2000 and most alloys
Gaskets: NBR, EPDM, FKM and others
Advantages:
* High efficiency due to full countercurrent flow
* Added security against leakage
* Resistant to thermal stress
* Compact and space saving design
* Ideal for handling of aggressive media
* Strong mechanical construction |
|
For more than 25 years, Allegheny Bradford Corporation has been recognized as the global leader in high purity stainless steel process equipment. We have built a reputation for quality in the design and manufacture of stainless steel shell and tube heat exchangers for pharmaceutical, biotechnology and other ultra-pure industries. As the recognized leader in the industry, we offer today's most advanced stainless steel processing technology, along with a team of dedicated professionals who are committed to providing you with products that deliver unparalleled performance and dependability, along with the responsive customer service you need.
When it comes to heat exchangers, ABC sets the industry standard. Quality is the cornerstone of our heat exchangers from start to finish. Our enineering specialists work closely with you to custom design the most efficient, cost effective heat exchanger for your thermal transfer requirements. From the documentation of raw materials in compliance with ASME BPE codes, to the precision CNC machining of tubesheets and bonnets, to final finishing, testing and documentation, Allegheny Bradford Heat Exchangers are manufactured to deliver superior performance and trouble-free operation, even in the most demanding ultra-pure processing environments. Allegheny Bradford Corporation custom designs every heat exchanger specifically to meet your exacting application requirements. Specially designed computer software combines fluid dynamics, thermophysical properties, thermodynamics and actual empirical data to ensure your shell and tube heat exchanger design is perfect for your application.
|
|
APV ParaTube
The APV ParaTube is ideal for Food and Beverage applications processing products:
* With particles
* Products sensitive to texture
* High viscosity products
And has a proven history within a number of product applications such as:
Pulpy juices * Baby foods * Nectars * Soups * Citrus cells * Sauces * Fruit mash * egg products * Diced fruits * Chocolate * Concentrate fruit juices * Coffee extract * Jams & jellies * Yeast slurries * Tomato products * Edible oils * Vegetable purees * Milk * Viscous dairy products * Cosmetic products * Puddings & desserts * CIP solutions * Waste water
APV ParaTube (tubular heat exchangers) can be supplied with either straight tubes or corrugated tubes. They all follow a similar construction format with a single tube or number of smaller tubes enclosed within an outer shell. They are available in the four configurations (Double, Triple, Quadruple or Multi-rube) and can be manufactured as a fully-welded design, with removable end caps or with built-in thermal expansion protection of O-rings or packing between the shell and tube bundle.
Key Benefits
* High flexibility in design to match multi-purpose line or plant
* Wide product range to cover almost any challenge in product processing
* Easy and low cost maintenance
* Resistant to fouling
Materials: AISI 304L, AISI 316L, Duplex SAF2205, SAF2507 and
other alloys
Temperature: -30 to 300 Deg.C
Pressure: 0 up to 100 bar gauge |
|
The PICKER heat exchangers range mainly consists of 6 families, each with its own body diameter and a given number of tubes, and there are even multiple optional versions, depending on :
> the construction materials,
> the SHELL-SIDE baffles,
> the TUBE-SIDE covers,
> the length of the tubes (and consequently of the exchange surface),
etc. |
|
Heatexchangers made from PTFE/PFA/PP-PE
products directly from the manufactuerer
Different versions are to your disposal. Gladly also special productions.
Don´t hesitate to contact: Mr. Helmut Meyer, Tel. ++49 2166 9590 16, Email: h.meyer@polytetra.com if you need any further assistance.
|
|
For more than 60 years, Votator scraped surface heat exchangers have been replacing slow, inefficient batching operations with more uniform, controllable and repeatable continuous processing. The Votator II incorporates the most popular features of the Thermutator and Votator lines, making it extremely easy to maintain.
The Votator II replaces the Thermutator and medium duty Votator units, and is also available as a vertical unit.
Typical applications are heating and cooling cheese sauce, pudding, caramel, deboned meat, pet food, and fruit products.
- 3A, ASME, USDA approved
- Pedestal mounted drive has smaller footprint, fewer parts
and less bulk than other designs; no belts or sheaves;
shaft coupling is eliminated
- Versatile jacket designs: brine, water, steam and
refrigeration with unique integral accumulator option
- Boltless V-Lock® heads for quick disassembly
- Unique slide-lock attachment holds blades securely on
the shaft, while making disassembly/assembly quick and
easy
Variety of options for drives, seals, blades, heat transfer, tube materials, mutator shaft diameters and cylinder mounting
|
|
Shell and Tube Heat Exchanger
Bowman Shell and Tube Heat Exchangers: are intended for heating or cooling process fluids, they are for example suitable for closed circuit cooling of electrical equipment using demineralised water and for cooling water soluble oil solutions in quenching tanks.
The shell side usually contains the process fluid and the tube side water from the town mains or a cooling tower, or an ethylene glycol solution from a chiller unit. In certain circumstances this flow arrangement can be reversed, but please consult us first.
|
|
Oil/water Heat Exchanger
Tube Bundle
Extremely compact as well as large construction series
AM
EKM
ECM
CM
SSCM
UKM
UKTM
with and without integrated aluminium ribs. Up to 35 bar oil pressure, cooling capacity from 1.5 to 300 kW, respectively 25 to 1 500 l/min. oil flow. Optionally with bypass valve for pressure peaks. Simple to clean. |
|
Setrab Oilcoolers
Setrab´s cooler program is designed for flexibility and performance. This means that our product range achieves superior applicability for our customers, and we can devise the best possible solution to suit the conditions dictated by the customer´s application. We can therefore offer our customers the right product for every occasion. Quality has top priority for Setrab. For us it is natural that quality is the guiding star when it comes to service and design, as well as production and distribution, to achieve the result the customer expects. We are working towards the highest quality on all levels within the organisation and the continuous development of our quality assurance system is a process that engages all of our employees.
|
|
Spiral tube heat exchangers provide high efficiency in a small profile for high pressure and severe service applications. The heat exchanger consists of dual manifold multi-tube spiral assembly inserted into the shell, where two fluid paths are created for full counterflow heat transfer. Standard tube bundle assemblies are stainless steel with welded tube to manifold joints.
Up to 40% more efficient than a shell and tube
Pressure ratings exceeding 10,000 psig (690 barg)
Compact and lightweight
Highly resistant to thermal and pressure shock
Least expensive construction for exotic materials
|
|
Stainless Steel Heat Exchangers
Bowman Stainless Steel Heat Exchangers are particularly useful in bad water environments caused by pollution or from the chemicals used to counter it. They can also be used to overcome the corrosive nature of some synthetic oils and refrigerants.
|
|
The FP Series is designed for a wide variety of Industrial fluid to fluid, gas to fluid and other applications requiring exacting heat transfer performance.
Capable of 80F to 100F approach to as low as 30F approach for the larger models. Totally sealed 316L stainless steel construction, copper brazed with a high performance heat transfer surface to promote low fouling. From 1/2 to 200 gpm models, and larger sizes to 400 gpm. ALL models have MPT male pipe thread connections (up to 200 gpm) and mounting stud bolts. Rated at 450 psi working pressure, both sides. U.L. Listed, European TUV and optional ASME code construction.
The FPN utilizes 316L Stainless Steel is ideal de-ionized water, solvents and other applications. Rated at 300 psi working pressure. |
|
Bowman is one of the UK's largest manufacturers of swimming pool heat exchangers.
Bowman swimming pool heat exchangers are manufactured with corrosion resistant cupro-nickel tubes and bronze end covers and are therefore suitable for use with chlorine water, seawater or therapeutic and spa pools. Bowman heat exchangers will normally well outlast stainless steel ones. Our units are very easy to maintain as both the end covers and tube stack can be removed easily for cleaning, this is unique to our design.
Bowman heat exchangers can be used where the swimming pool water is heated by a boiler or by solar panels.
Units suitable for use with pools up to 145kW or 500,000 BTU/h are supplied with mounting brackets as standard. Bowman heat exchangers are also available with a thermostat pocket which enables a thermostat probe to be fitted into the end cover. This removes the need for the thermostat to be fitted into the pipework.
The heat exchanger can be mounted horizontally or vertically.
Bowman swimming pool heat exchangers can also be used to cool swimming pools in hot climates. Water from a chiller passes over the heat exchanger tubes instead of boiler water or water from a solar panel which is used when heating swimming pools. Please contact us for further information about using our heat exchangers for cooling pools.
|
|
Spirally wound tube-in-tube full counter flow heat exchangers for low flow rates of high temperature and/or high pressure fluid or gas. Widely used for gas/vapor condensation.
Fully drainable inner and outer coil
No dead spots or crevices
Excellent for multi-phase/multi-component fluids & slurries
Wide variety of materials available including Copper, 316 Stainless steel, Inconel 625, Hastelloy, Titanium, Zirconium, PTFE, and a variety of other nickel and stainless steel alloys.
Tri- clamp and electropolished units to meet sanitary requirements
|
|
"Oil / Water Cooler Series BWT
High exchange efficiency
Equally distributed turbulent flow
Little installation space required
High fatigue life
Low water consumption
Maintenance free
Broad temperature range
Easy installation" |
|
| These compact heat exchangers make it possible to dissipate important powers. Technology with welded PWO, tubular plates Flovex or plates and joints. |
|
WATER-OIL HEAT EXCHANGERS WITH TUBE BUNDLE:
They consist of small diameter smooth tubes; this allows the best compromise between high thermic yield and low pressure loss. For a good exchanger practices some oil rates are indicated in the tables. Going down to the lowest rate of flow, indicated in the tables, the low oil speed causes a great loss in yield, whereas a rate of flow which is superior to the maximum indicated, causes great pressure loss and does not considerably increase the thermal yield. The yield diagrams indicate the heat quantity each exchanger can disperse according to the difference between oil and water mean temperatures. |
|
On the heat exchangers PICKER, connections of the fluids are carried out according to families' of exchangers :
> By tapping known as "cylindrical gases" carried out in the element and/or the lids (usually for connections until 1"1/4).
> By counter-flanges of our standard, usually delivered "full" with joints and screws and bolts (for connections welded, brazed or screwed).
With additional charge, the machining of the counter-flanges can be carried out by our care (only borings or tapping "cylindrical gases"). This option must be mentioned with the order by indicating the desired diameters. |
|
Our completely welded, gasket-free plate heat exchangers of the SIGMAWIG series represent a new generation of plate heat exchanger.
In the SIGMAWIG units, all parts, which come into contact with the fluids, are made completely of stainless steel.
An optimised welding system and an automated production line guarantee the high quality of our compact, gasket-free plate heat exchangers.
The optimised corrugation structure of the heat exchange plates achieves the best possible heat transfer.
SIGMAWIG plate heat exchangers are available in various standard sizes directly from our warehouse. For special areas of application, where aggressive substances or extremely high temperatures and pressure cycles are used, we can customise a system to suit your need.
Our high production quality guarantees the long operational life of the SIGMAWIG.
|
|
GEAShell - an extremely reliable, fully welded plate heat exchanger that proves its superiority where other heat exchangers reach their limits: At temperatures between minus 200 °C and plus 950 °C and at extreme operating pressures.
The heat transfer surface of a GEAShell consists of many profiled stainless steel plates which are welded together to form a plate pack and are precisely fixed in a shell tube. After fitting the connections, the shell tube is completely welded.
The GEAShell plate heat exchanger is particularly suited for use in the :
- Process industry
- Refrigeration engineering
- Chemical industry
- Power engineering and marine applications
Its special design and the resulting ruggedness are especially important at extreme operating temperatures and pressures where conventional heat exchangers fail to meet these requirements. |
|
|
|
Fluid-fluid heat exchangers
