|
|
The aftercoolers will reduce the temperature of air from a compressor supplier down to within 8 degrees C of the cooling water temperature. They should be mounted in a vertical position, with a moisture separator inserted in the air-line immediately after the air outlet from the cooler. To avoid undue strain on the aftercooler long lengths of unsupported pipes should be avoided.
PLEASE CONTACT E J BOWMAN DIRECT FOR BROCHURE REQUIREMENTS. |
|
| GEA FlatPlate is the leading manufacturer of a full line of compact ammonia refrigeration heat exchangers manufacturers. These heat exchangers have been designed and tested for exacting applications. The NH3 line has considerable advantages over traditional shell/tube, such as lower cost, 1/5th the size and higher performance. Operating temperatures from -100 deg.F and higher. All models are 316L stainless steel plates, nickel/chrome brazed and rated for 400 psig. Optional ASME Code. Optional European PED (CE) Code. |
|
Controlled circulation, water tube,
vertical/horizontal. |
|
Lytron’s brazed-supplier of plate heat exchangers are unsurpassed for liquid-to-liquid heat transfer. Their innovative design packs maximum performance into a compact and reliable package. The herringbone construction allows for maximum heat transfer making this suppliers of heat exchanger extremely efficient. The liquid-to-liquid brazed plate heat exchanger is a highly reliable and rugged part with stainless steel sheets brazed together at the edges and at a matrix of contact points. Compatible with a wide range of fluids, we offer copper brazed for water, EGW and other common coolants or nickel brazed for high purity and other corrosive coolants.
|
|
- Model BPX brazed manufacturer of plate heat exchangers offer the highest level of thermal efficiency and durability in a compact, low cost unit.
- The corrugated plate design provides very high heat transfer coefficients, resulting in a more compact design.
- The unit's stainless steel plates are vacuum brazed together to form a durable, integral piece that can withstand high pressure and temperature.
- The BPX suppliers of heat exchangers offer a compact design compared to shell and hose exchangers. |
|
CHN Series, All Stainless Steel, Nickel Brazed
1/2 to 80 Tons
GEA FlatPlate manufactures a full line of NICKEL/CHROME brazed heat exchangers manufacturer used for de-ionized water chilling, solvent cooling, and other applications. The CHN Series are nearly identical to the CH Series, except for the all stainless steel, nickel brazed feature and all CHN models have MPT waterside professional fittings. The CHN Series is a very cost effective and compact design. Select models have a built-in DX distributor for enhanced stable operation. Rated at 300 psig (21bar) from 1/2 to 80 tons (1 to 300kw). UL Listed. Optional ASME Code. Optional European PED (CE) Code. Optional 400psig and 450psig versions. |
|
Our brazed plate heat exchangers are manufactured in 5 sizes in model series 12, 18, 25, 57 and 100. In model series 25 and 57, three plate types "H", "M" and "L" are available, whereas model series 100 uses "M" plates exclusively. In model series 18, "L" plates are additionally available.
For brazing, every other plate is rotated by 180 degrees in the plane to produce to separate flow channels in which the products involved in heat transfer flow in opposite directions. The plate contours generate a highly turbulent flow allowing very efficient heat transfer even with low volumetric flows. Heat transfer depends on the angle of the V-shaped profiling of the individual plate types. The flow gaps produced in this way generate different degrees of turbulences which determines the heat transmission. Three different V-shaped profilings are available, referred to as "H", "M" and "L".
Advantages:
Compact unit, low weigh
High heat transfer due to refined plate profiling
High operating temperatures and working pressure
Stainless steel material, corrosion-resistant
Simple installation, extremely low maintenance requirements
Inexpensive unit due to series production
Low product volume
Applications:
District heating node stations
Swimming-pool-water heating
Refrigeration technology
Heat recovery systems
Solar energy systemsBlock-type thermal power stations
Oil cooling
Heat tapping
System separation
Glycol/water systems
Underfloor heating systems
Solar systems
Heating systems
Oil cooling
Test rig
Industrial presses
Motors
Transformers |
|
| A revolutionary type of plate heat exchanger manufacturers constructed of 316 stainless steel plates brazed together to eliminate gaskets, heavy frames, weight, and bulk. The HoneycombTM (Model BP) design is an "Off-the-shelf" corrugated plate design for quick delivery. Design pressures to 435 PSIG and temperatures to 437°F. Flow rates to 190 GPM |
|
APV ParaBrazed
The APV ParaBrazed is a large range of AISI 316 compact brazed supplier of plate heat exchangers specially designed for a multitude of heating and cooling HVAC, Industrial and Refrigeration applications involving high temperature and/or pressure.
The APV Parabrazed is characterized by:
* Very compact design with minimum space requirement
* Easy to mount, easy to install
* High heat transfer efficiency
* Flexible in use
* Working temperature -50 to 195 Deg.C
* Working pressure up to 30 bar |
|
The Copes-Vulcan VO-76 is especially well suited for high pressure and temperature service (e.g. ANSI 1500 and above). It is particularly adaptable where custom professional fitting to new or existing piping is a problem. The VO-76 provides alternatives where limited space or changes in header diameter are factors.
Features:
- The VO II offers extremely fine control and exceptional turndown that is limited only by the rangeability of the coolant control valve itself. Typically the unit can achieve a rangeability of 100:1 when matched with a Copes-Vulcan control cock fitted with Cascade trim design.
- Due to excellent mixing of vapor and coolant, control is possible throughout the entire operating range to within 5 °F (2.5 °C) of the set point, which can be as close as 10 °F (5 °C) above saturation.
- The coolant pressure, which is required at the inlet to the VO II need only be 5 PSI (0.35 bar) above the pressure of the vapor being desuperheated.
Since virtually all the desuperheating occurs within the body itself, usually no pipe liners or long downstream straight pipe runs are necessary.
|
|
Schutte & Koerting, designer and manufacturer of equipment for the process and power industries since 1876, introduces a new Surface Absorption Desuperheater. The newly designed desuperheater provides a near infinite turndown ratio, making it ideal for applications with widely varying load conditions. This ability to assure saturated steam under fluctuating loads will extend the operating life of downstream components and provide increased productivity with higher yields.
Because of its unique design, this desuperheater is about 30 percent less expensive than traditional cast units. It has ratings to 1500 psi and no thermal sleeve is required. The unit is an excellent choice for any application with space limitations, where minimal water carryover is required, or where efficient operation is necessary under widely varying load conditions. The new Surface Absorption Desuperheater is backed by Schutte & Koerting’s 120 years of experience.
|
|
| Bowman Engine & Transmission Oil cooling are equally suitable for cooling torque professional converter, automatic transmission and engine oils. Being water cooled they have the advantage of freedom from accidental damage and also encourage quicker warming up of the oil, a feature which is particularly valuable in cold climates. The tube stack is fully floating so that thermal stresses are minimised and it can easily be removed should cleaning be necessary. |
|
Setrab Oilcoolers
Setrab´s cooler program is designed for flexibility and performance. This means that our product range achieves superior applicability for our customers, and we can devise the best possible solution to suit the conditions dictated by the customer´s application. We can therefore offer our customers the right product for every occasion. Quality has top priority for Setrab. For us it is natural that quality is the guiding star when it comes to service and design, as well as production and distribution, to achieve the result the customer expects. We are working towards the highest quality on all levels within the organisation and the continuous development of our quality assurance system is a process that engages all of our employees.
Cooling of engines & transmissions with Setrab's STD and COM industrial coolers |
|
Bowman Exhaust Gas Heat exchangers suppliers are designed to remove heat from the exhaust gas of engines and transfer it to the water circuit.
These heat exchangers therefore enable waste heat recovery and can be used on cogeneration/combined heat and power (CHP) equipment up to 700 kw.
These exhaust gas heat exchangers are constructed with stainless steel tubes, tube plates and body and cast iron end covers which allows use with biogas, diesel gases and natural gases.
Bowman exhaust gas heat exchangers can also be used to reduce the exhaust temperature in engines operating in hazardous environments where for safety reasons it is necessary to reduce the temperature of the exhaust gases
|
|
| AP&T´s niche tools and production solutions are available in product areas like deep drawing, fire extinguishers, industrial air duct parts, pressure vessels, filtration housings and suppliers of heat exchangers. We have the knowledge to produce heat exchanger plates in stainless steel, with or without copper, and in thickness from approx 0,4 to 0,9 mm. |
|
The combination of 125 years of experience and the sale of more than 100 000 plate heat exchangers has made API Schmidt-Bretten one of the most competent, efficient partners in the heat exchange industry.
Our SIGMA series of gasketed plate manufacturers of heat exchangers are known world wide for their high quality.
A large selection of designs of SIGMA plate heat exchanger plates are available with different surface areas, corrugations, plate materials, plate thicknesses and gasket materials for all applications.
The pillars of our success, as one of the leaders in the heat exchange business, is the continuous innovation and the improvement of our high quality products.
|
|
The world's largest range of efficient industrial heat exchangers for a wide variety of applications. The heat exchangers are built on a module-based concept.
Frames, plates and connections can be combined to form a number of different exchanger types. By using different types of plates with different characteristics the exchangers can be adapted to a wide variety of applications.
The exchangers can easily be dismantled for inspection, cleaning and maintenance. Another benefit of the gasketed-plate heat exchangers is that they can be easily expanded or adapted, by adding or replacing plates, when the conditions change.
|
|
APV Heat exchangers manufacturer
All the Heat Transfer technology you need
APV invented the plate heat exchanger in 1923 and has continuously proven to be the preferred partner for heat transfer applications.
APV gasketed panel heat exchangers are widely used for heating, cooling, pasteurizing and heat recovery in hygienic and industrial applications including food and beverage industries, chemical, petrochemical, oil & gas, power, energy, other industrial sectors, and marine applications.
* Compact and durable designs
* High efficiency due to full industrial counter current flow
* Resistant to thermal stress
* Glue free gaskets
* Possibility of combining different gasket materials for cost effective solutions
* Easy to clean
Materials:
Plates: AISI 316, AISI 304, Titanium and most alloys
Gaskets: NBR per, EPDM, FKM and others
Frames: Stainless steel or painted Carbon steel
Extensive range of plate options
EnergySaver plates for superior heat transfer efficiency.
DuraFlow plates for continuous process and run time.
EasyFlow plates for media containing fibres or pulp, requiring highest possible recovery without blocking.
DuoSafety plates, when added security against intermixing is required. |
|
Bowman Header Professional tank Heat exchangers.
The header tank heat exchangers were designed originally for marine engines, but they are also widely used for various land based duties, such as engine testing and development work, supplier of generator sets, fire pumps and combined heat and power systems.
The header tank heat exchanger incorporates a quiet zone header tank with a special deaeration feature and a pressurised filler cap. The removable tube stack is held in position by 'O' rings and is free to expand and contract within the cast housing, thus minimizing thermal stresses. It can be easily removed should cleaning be necessary.
Bowman Header Tank Heat Exchangers are high-quality products incorporating both the best materials and the latest technical features.
|
|
Lytron's heat exchanger technologies include tube-fin, industrial oil cooler, plate-fin, and liquid-to-liquid brazed supplier of plate heat exchangers. With almost five decades of experience in heat exchanger design and manufacturing, Lytron's expertise is second-to-none. Lytron's suppliers of heat exchangers are used in many industries including military and aerospace, medical and industrial industrial lasers, medical imaging, analytical instrumentation, power electronics, semiconductor equipment, system tools and telecommunications.
Any of Lytron's heat exchanger technologies can be customized to your exact requirements. Lytron also supplies heat exchanger subassemblies, adding professional fittings, industrial hoses, professional fans, sensors and other instrumentation to your specification. Lytron's seven heat exchanger product lines with over 130 standard parts ensure that when you need an off-the-shelf part Lytron is likely to have something that meets your requirements.
Lytron’s broad range of heat exchanger technologies combined with almost five decades of thermal transfer experience enables us to offer tailored solutions for a wide range of applications. Lytron's tube-fin, oil cooler, plate-fin, and liquid-to-liquid brazed plate heat exchangers can all be customized and integrated into subassemblies.
|
|
| Maag Pump Systems Textron specializes in the design and application of blendrex polystyrene preheaters used to preheat polystyrene melts prior to devolatilization, and of blendrex polyester industrial coolers used to cool polyester prior to spinning or pelletizing. |
|
A Comprehensive Range of Suppliers of heat exchangers for Power Generation and Industry
Our heat exchanger range covers:
-Air preheaters
-Condensers, feedwater heaters and other heat echangers of the water-steam cycle
-Various types of heat exchangers for the conventional part of nuclear plants
-Once-through coolers for gas turbines
-Energy recovery exchangers for petrochemical applications |
|
GEA FlatPlate Systems offers a comprehensive range of products supporting virtually any supplier of heat exchanger application.
GEA FlatPlate maintains the highest standards in heat exchanger construction and builds various models to the one or more of the following codes and standards:
- U.L. - Underwriters Laboratory
- ASME Code
- European PED (CE)
- Canadian CRN
- Swedish NDV (pending)
- Lloyds Registry (for ships, pending)
- All GEA FlatPlate products are UL listed. Please specify any or all appropriate code approvals when ordering |
|
| OF fixed tube sheets having straight tubes of 5/8" and 3/4" O.D. are excellent where the heavy fouling fluids are inside tubes and light fouling fluids in the shell. An expansion joint must be used when wide temperature differences exist or abrupt temperature changes occur between tube and shell side fluids. |
|
|
|
Fluid-fluid heat exchangers
