|
|
Applications:
These can be fabricated for use in warming tables, professional cabinets heaters, cooling tables, heating plates for form carriers or even radiating heaters for household use. |
|
| Fast Heat offers variety of band heaters to accommodate any cylindrical application. Fast Heat's product offering ranges from the patented better band using mineral insulated technology to the better belly band used for compressor manufacturer applications. |
|
Band heaters are designed for use in different applications:
- Ceramic band heaters: with an heating spiral manufactured from NiCr and steatite insulated, these heating elements are sheathed by an Alusi or stainless steel jacket. Increased insulation is achieved through a layer of mineral fibre. Max. operating temperature: 600°c and max. surface load 8W/cm˛. Especially designed for plastics injection moulding and extrusion where high temperature is required. |
|
Led by the high performance MI (mineral insulated) Band heater, the patented, flexible THINBAND® heater and the standard mica band heater for specialized constructions, Watlow's band and atomizer heaters are ideal for every type of plastics processing equipment.
Applications
Extruders
Blown film dies
Injection molding machines
Other professional cylinder heating applications |
|
U.L. Recognized - E56973 C.S.A. Certified - 016386-0-000
Applications:
Cylinders, Dies, Drums, Holding Tanks, Injections and Blow Casting machines, and Plastic Extruders manufacturers.
Features:
-The Hotwatt Standard Band heaters are manufactured in one or two piece constructions with maximum inside diameters of 11 1/2" and 22 1/2" respectively. Three or more sections are employed when heaters of larger diameters are needed (as for blown film extrusion dies).
-Holes and cutouts are available. Maximum wattage may be reduced with the addition of holes and cutouts. Drawing required for specific location.
-Made in U.S.A |
|
The versatile Watlow cable heater can be formed into a variety of shapes as dictated by its many applications. These small diameter, high performance units are fully annealed and readily bent to your desired configuration.
Applications
Plastic injection moulding nozzles suppliers
Semiconductor manufacturing and wafer processing
Hot metal forming dies and punches
Sealing and cutting bars
Restaurant and food processing equipment
Cast-in heaters
Laminating and printing professional presses
Air heating
Heating in a vacuum environment
Textile manufacturing |
|
The heating cartridges are used for the heating until 750°C of metal parts such as moulds, systems with hot channels, dies, tools of splicer and marking in the industry of the plastics and the machines of conditioning.
The heating collars are used for the heating of cylindrical parts. Of robust design, the characteristics (insulator-connector industry) are closely related to the operating conditions
|
|
| Since 1957 Fast Heat has been designing and professional building quality cartridge heaters utilizing only the best materials and state of the art manufacturing techniques. Understanding that every application is unique, Fast Heat has a broad range of products, termination styles and sizes to accomodate your needs. |
|
hotrod® cartridge heating elements (type HHP and LHT) are core products of hotset´s tradition. Excellent knowledge, high-quality materials as well as the outstanding manufacturing guarantee long life and excellent product features.
By intensive cooperation – also with special applications – hotset gives again and again innovative impulses to its cartridge heaters with new technical features (e .g. humidity-resistant connection area).
By optimal production conditions of Hotset Malta Ltd. an unique price-performance ratio can be achieved for larger quantities. Hotset cartridge heaters offer high functionality and high production safety – driving quality!
|
|
Vulstar® cartridges are used to heat metal like moulds, dies, plates and manufacturer of bolts or liquid.
Supply voltage up to 450 V 1P or 3P.
Load up to 40 W/cm2.
Length from 25 mm to 2500 mm depending on diameter.
Diameter from 6,35 mm (1/4") up to 31,8 mm (2" 1/4).
Different types of connection to fit with the ambient temperature.
This cartridges can be provided with a thermocouple manufacturers . |
|
The Watlow FIREROD® heater enters its 50th year of industry leading expertise as the premier choice in swaged cartridge heating. With premium materials and tight manufacturing controls, the FIREROD heater continues to provide superior heat transfer, uniform temperatures and resistance to oxidation and corrosion even at high temperatures.
FIREROD offers many delivery programs to meet your needs: same day shipment, Ship-to-Stock or Just-in-Time. And our experience in customized engineering is reflected in over 250,000 FIREROD cartridge heating designs. Stock or made-to-order, the Watlow FIREROD delivers heat in a hurry.
Applications
Molds
Dies
Platens
Hot plates
Sealings
Fluid heating
Life sciences
Aerospace
Semiconductor
Foodservice equipment |
|
U.L. Recognized - E56973 C.S.A. Certified - LR-16386
Applications:Compressor Crankcase Heating, Copiers, Dies, Food Processing, Glue Pots, Heat Sealing, Hot Melt Professional adhesive, Labeling, Medical Equipment, Packaging, Photographic Processing, Plastic Molding, Platens, Wax Pots.
-Hotwatt Precision Cartridge heaters provide localized heat to restricted work areas requiring close thermal control. Dies, Platens, and a variety of other types of processing equipment are efficiently heated. Closely controlled work temperatures up to 1250°F are obtained by a combination of heater location and proper wattage output.
-Basic designs are readily adaptable to a wide variety of special requirements, sizes, or ratings.
-Maximum surface temperatures up to 1250°F.
-Designations are etched on the sheath to preserve accurate shape.
-Industrial heating elements arranged just beneath outside surface for maximum heat transfer, minimum core temperature and faster heating.
-Made in U.S.A.
-Where specified, units can be supplied liquid tight.
-Long, trouble free service. |
|
When Watlow creates a custom-engineered cast-in product, the result is more than just a heater. It's a "heated part" that becomes a functional component of your equipment, designed in the exact shape and size you need. The IFC heated part consists of a Watlow heater element built into custom metal shapes designed specifically for your application.
Applications
Semiconductor manufacturing
Foodservice equipment
Plastics processing
Medical equipment
Hot glue melt
Circulation heating |
|
Ceramic fibre heaters intergrate a high temperature iron-chrome-aluminum (ICA) heating element wire with ceramic fiber insulation. Numerous stock, standard and/or custom shapes can be provided, achieving the "heated insulation" concept for your high temperature, non-contact applications. The ceramic fiber insulation isolates the high temperatures inside the heated chamber from the outside. The heaters are low mass, fast heating, with high insulation values and self-supported industrial heating elements that offer some of the highest temperature heating capabilities within the Watlow family of heater designs.
Applications
High temperature kilns
Metal melting, holding and transfer
Semiconductor processing
Glass, ceramic and wire processing
Analytical instrumentation
Fluidized beds
Laboratory and R&D
Other high temperature process applications |
|
ULTRAMIC™ 600 Advanced Ceramic Professional heater
When you need a lot of power in a small package, the ULTRAMIC™ 600 puts the performance of advanced ceramics to work for you. Constructed of aluminum nitride (AlN), the ULTRAMIC 600 can operate up to 600°C (1112°F) and deliver ultra-fast ramping of up to 150°C (270°F) per second for rapid thermal cycling applications.
The robust mechanical structure of the high density AlN enable these heaters to exhibit exceptional mechanical stability throughout the temperature range. This makes the product especially suitable in applications where consistent part-to-part thermal contact during heating cycles is critical. Additionally, these heaters are applicable when requiring a clean, non-contaminating heat source as they are particle free, impervious to moisture and resistant to acidic attack.
Applications:
Semiconductor wire and die bonding
Analytical instrumentation
Medical devices
Packaging
Aerospace |
|
U.L. Recognized - E56973 C.S.A. Certified - 016386-0-000
Applications:
Copiers, Dehumidifiers, Industrial glue guns, Heat Sealing Tools, Instrumentation, Resisters, Soldering and Desoldering Equipment, Cock Heaters.
Features:
-The Hotwatt Ceramic Heater is a ceramic body encasing a resistance element and packed within magnesium oxide.
-The heaters are terminated with flexible insulated lead wires.
-Temperatures to 1300°F (705°C)
Construction:
-Ceramic body
-Premium grade resistance wire element
-Magnesium oxide packing
-Ceramic end professional seal
-Flexible insulated lead wires |
|
Ceramic Plate Heater Features
The Ceramic Plate Heater is made of the highest quality refractory ceramic
with heating coils of nickel chrome resistance wire.
These heaters are supplied with leads.
Available in various wattages and voltages.
Heaters may be supplied with exposed resistance element or refractory cement filled.
PH3: 3-1/8 O.D. 100W-300W |
|
Watlow's circulation heaters are compact heating solutions for fluids such as purified and inert gases, supercritical fluids and liquids like de-ionized water for use in semiconductor and electronics industries as well as for general liquid and gas heating applications. Watlow's industrial process heater lines of immersion, circulation and duct heaters are used to heat a myrid of high and low viscosity fluids ranging form de-ionized and process water, oils, solvents, rinse agents, caustic solutions, etc. to process gases like air, nitrogen, purified and inert gases as well.
Applications
Oil and gas field equipment
Refineries and petrochemical plants
Chemical and technical gas plants
HVAC duct heating
Open tanks and heat treat baths
Textile drying
Heat transfer and lube oil systems
Semiconductor processing equipment
Precision cleaning equipment
Power generation systems
Emissions control systems
Supercritical fluid heating
In-line water boilers |
|
hotset presents a wide product spectrum of hotspring® coil heaters:
- Starting with WRP / Micro up to WRP / Maxi with different lenghts and diameters.
- Brass-coil heaters or coil heaters with clamping mechanism as industrial heating elements for different applications.
- Heating systems such as the hotcast® sealed professional heater (GMH) or the hotcone® heated manufacturer of nozzle (BMD).
- Special products such as hotslot® and hotslight®.
- As well as a wide spectrum of applications.
hotset was already in 1980 one idea ahead as they presented the first round coil heater (type WRP Ř 3.3). Since then further innovations have been made: WRP / Mini, flat and square coil heater (WRP / F resp. WRP / Q), WRP / Maxi as well as WRP / Micro.
This innovation as well as the humidity-resistant coil heaters according to I.P. 65 (WRP Ř 3.3 - WRP / F 2.2 x 4.2 – WRP / Q 3.0 x 3.0) emphasize the consequente alignment to new challenges.
|
|
Technical details
- Protection class I (ground wire) - protection type IP 54
- Temperature setting:
ON 38 °C - OFF 54 °C (operating temperature of heating
system itself)*
-> Other settings upon request
- Connection:
Connecting leads (AL) 0.25 m, 3 x 0.75 mm˛, silicon
-> Other lengths upon request
- Mounting position: horizontal
- Fastening:
Screw fastening |
|
Forced circulation fluid heaters are particularly suited to the heating of liquids such as water, superheated water, heavy oil, fuels, oils and thermal fluids and gases under pressure such as air, steam (superheater), nitrogen, hydrogen, methane, etc.
Defined specifically for each industrial application, these heaters consist of one or more steel or stainless steel bodies linked hydraulically in series and/or in parallel and meet the requirements conforming to the PED European Directive.
To prevent corrosion problems related to the working fluid and operation temperature, the elements are built with the appropriate stainless steel. The bundle spacers are designed to obtain the optimal heat exchange coefficient. The heating array, with a maximum immersion length of 3300 mm, can be equipped with temperature control devices to regulate the sheath watt density (W/cm˛) as a function of parameters such as fluid flow, pressure, viscosity, fluid temperature, sheath skin temperature, etc…
Built in accordance with the construction codes specified for the pressure and temperature in question (CODAP, ASME, TEMA, STOOMWEZEN…), these assemblies allow very high power ratings to be reached (= 2000 kW)
Devices can be produced according to ATEX directives.
|
|
These appliances are used to heat circulating fluids such as water, fuel oil, as well as air or gases in general at up to 15 bar max.
They are fitted with screw plug immersion heating element, flange immersion heater or high flux rods.
Temperature sensors suppliers and controlers can control the temperarure of the flow and safety stations protect against over temperature.
Fluid circulation heaters can be connected hydraulically in series, which allows a very large heating power to be achieved. |
|
U.L. Recognized - Guide SEOT2, file SA4093 for use in air conditioning equipment.
C.S.A. Certified - Guide 165-E-90, file 016386-0-000 for use in air conditioning equipment.
Applications:
Crankcase heaters are used to overcome the problem of migration and condensation of refrigerant in the crankcases of compressors suppliers used in air conditioning and heat pump systems.
They are designed to keep the crankcase oil at a temperature higher than the coldest part of the system to prevent migration.
Features:
Hotwatt Crankcase Heaters are constructed of the highest quality corrosion
resistance materials and sealed against moisture.
The following list Hotwatt Crankcase Heaters by the OEM manufacturer. In addition, custom designed crankcase heaters and variations to the units shown are also available. |
|
| Heating sleeves to heat segments of 200 litre barrels per DIN. both the inner and the outer sheath of the barrel heating sleeve are made of aluminium sheet, which ensures maximum protection of the electrical components against mechanical damage. A hinge with campling closure that divides the heating surface into two semi shells permits convenient assembly, without the heating element needing to be bent. The barrel can be heated complete by using 3 sleeves. |
|
Designed for direct immersion thru 2" bung opening in 55 gallon drums.
Incoloy sheath for long life in most materials.
60-250°F integral manufacturer of thermostat.
Manual reset thermostat protects against overheating.
Adjustable mounting bracket.
Low watt density (1000w - 120v - 8 watts per square inch)
for heating oils, fats and solvents.
High watt density (4000w - 240v - 32 watts per square inch)
for heating water and water based solutions. |
|
| Condensation poses a particular risk for control electronics, especially with outdoor siting, but also indoors. Various different output categories ensure that the correct thermal output is always available. In this way, the total required thermal output can be distributed with complete accuracy within an enclosure. |
|
|
|
Heating resistors
