|
|
Explosion-proof safety vacuum drying oven for EX-Zone 2
BINDER VDL EX-Zone 2 series:
Same quality as the VDL series, but with some added safety features: The VDL series EX-Zone 2 is designed for operation in explosion hazard areas EX-Zone 2, in full compliance with ATEX requirements. Our special safety package eliminates any risk.
Find out more: www.vacuum-drying.com
|
|
| Industrial drying ovens of drying of 100°c with 500°c. A whole standard range of 20 liters to 2000 liters. |
|
Universal precise laboratory electric oven SNOL 58/350 is designed for drying various materials in air environment.
Oven can be used in laboratories, educational institutions medicine, and industrial sector.
•Micro processor temperature controller
•Stainless or mild steel interior
•High quality thermoinsulation materials
•Circulating fan
•Low power consumption
•Two shelves
•One year limited warranty and later service
•Two years limited warranty for temperature controller and latter service
•Available connection to PC
|
|
drying ovens of drying and hot room for the laboratory or the production, range VTU.
These drying ovens are available year 7 volumes with a broad range of accessories and options such as carriage of loading, programmer etc... These drying ovens can be used for processes of heat treatment and drying in production and research.
Volumes of work 200-8000 liters
Page of temperature of work 250°C, 300°C and 350°C
Guidance of horizontal air.
|
|
- Applications: laboratory glassware drying.
- Temperature range: 60°C maximum.
- Three sizes: 280, 560 and 780 liters.
Several options and accessories to adapt the oven to your needs. |
|
| KCH offers a variety of dryers to handle the most severe thoughput requirements. Dryers are fabricated from stainless steel material, insulated with fiberglass insulation and covered with a light gauge stainless steel skin. These dryers can be heated by steam or electricity depending on plant conditions. All KCH dryers are equipped with centrifugal type blower to deliver required air volume to effectively dry parts quickly and include over temperature protection technology. |
|
Granulation Dryers
Gruenberg Oven Company designs and manufactures a complete line of standard and custom granulation dryers with capacities from 15 to 800 cubic feet. Dryers are designed to reach maximum temperatures up to 90° C for steam and 260° C for electric units. In addition, control systems can be self-sufficient relay logic or PLC, or can be integrated with your process PLC.
Features:
Heavy-duty, fully-welded, structural steel frame
Exteriors constructed of 16 and 18 304L stainless steel with a #4 polish to withstand frequent wash downs
Controlled recirculation or single-pass systems are available
All interior surfaces are 100% continuously welded stainless steel for quick and easy wash-downs
Custom trucks, trays, and transfer carts are available
Explosion resistant construction available to meet Class 1, Group D, E, F, and G NEC.
|
|
The VFT 60/90 is an explosion-proof drying oven of drying. The apparatus is heated with electricity its principle rests on the principle of the forced fresh air. From reduced dimensions of its obstruction outside, it not only is very well adapted for the production, but also for work of laboratory. The advantages the such almost unlimited capacity of combustible material filling and, the aptitude for solvents of the classes of temperature T1, T2, T3, T4 belonging to the groups of explosion IIA and IIB as well as the remarkable homogeneity of the temperature in all useful volume represent some points among others which make it interesting.
|
|
Explosion-proof heating oven
and drying oven VFT 60/90
The VFT 60/90 is an ex-proof fresh air heating and drying oven. The oven is electrically heated and designed according to the fresh-air-principle. Due to the small floor space required it is also suitable for installation in laboratories and in production departments. The advantages, e.g. no restriction on the volume of combustible solvents, suitable for solvents with the temperature classes T1, T2, T3, T4 in the explosion groups IIA and IIB, precise temperature uniformity in the whole working chamber.
Working chamber volume 300 liters
Temperature 200 °C
Temperature classes T1, T2, T3, T4
Installation Zone 2
|
|
Drying oven for the heat treatment and drying in explosion-proof version VFT 60/90.
The standard drying oven VFT 60/90 and one drying oven with electric heating with 100% of admission of permanent fresh air.
because of its reduced dimensions, this drying oven finds its place in all the laboratories and the production.
No the restriction of loading out of flammable solvents, this drying oven is adapted for the classes of temperature T1, T2, T3, T4 and the groups of explosion IIA and IIIB.
Volume of work 300 liters
Temperature 200°C
Classes of températureT1, T2, T3, T4.
Zone of installation 2.
For more information to consult us |
|
Explosion Resistant Ovens
All standard Gruenberg Ovens can be modified to be explosion resistant. Explosion resistant ovens incorporate design features that allow the oven to be operated within a volatile atmosphere defined as Class I, Group D or Class II, Group E, F, or G.
Features include:
Non-sparking brass explosion-relief door latches
Wiring encased in rigid conduit or approved mineral insulated cable
Fully-welded liners and removable air circulation ducts and baffles (when dusting loads are dried)
Non-Sparking aluminum or brass blowers or circulation fans
Heating coil sealed within a seamless Incoloy tubular element
Electrical connections entering the oven through sealed ports and terminating in approved explosion-resistant housings
Approved, static-eliminating belt drives
Explosion-resistant motors
Approved, explosion-resistant electrical equipment and controls enclosed in explosion resistant housing or purged boxes
|
|
Temperature test chambers with forced convection and individual programming
BINDER M series:
Because of its individual programming options and ability to operate at maximum temperatures up to 300 °C, the M series is ideally suited for materials testing and aging tests. The heavy-duty air turbine and a programmable exhaust ventilation flap provide rapid heating-up and ensure that the test temperature is maintained absolutely precise at all levels, with minimal spatial fluctuations; performance as never before.
|
|
| Drying ovens of laboratory with forced convection temperature of 100° with 400°c. A whole standard range of 20 liters to 100 liters. |
|
|
The Despatch LBB oven features a combination of horizontal and vertical airflow that offers excellent temperature uniformity at a moderate price. It is recommended for a variety of laboratory and production applications including drying, curing, annealing and materials testing.Every LBB oven is UL and C-UL listed, and receives a thorough performance test before shipping.
|
|
Heating ovens with forced convection
BINDER FED series:
The FED series is a true all-rounder. It has a virtually unlimited capacity and is at the same time particularly adaptable to the specific requirements of a large variety of testing applications. The enhanced time functions and the digitally controlled air turbine can be used to adjust ideal temperature parameters and recirculation air conditions.
|
|
Q63 LARGE CAPACITY FRONT LOADING PRIORCLAVE LABORATORY AUTOCLAVE
Designed to give the advantages (more difficult to overload and lower costs) of Priorclave’s cylindrical section autoclaves but with a higher capacity the Q63 autoclave is ideal for autoclaving heavy or bulky items.
- 630mm Dia. Cylindrical Chamber
- 320 Litre Capacity
- 21kW kW electric or direct steam heating
- Fully settable up to 138oC–2.4 Bar. 1-999 minutes
- TACTROL microprocessor control system with optional 5 or 10 program memory
- BioCote anti-microbial surface coating – unique to Priorclave
- Castor mounted for ease of positioning
- Two non-tipping shelves
- 12 months parts and labour warranty (parts only outside UK)
- 10 year or 10,000 cycle pressure vessel warranty
- Thermal interlock for safety with liquids in glass containers
- Pressure interlock
- Quickseal Series II single action closure
- Media Warming
- Delayed Start
- Fan cooling
- Timed Freesteaming
- Thermocouple port and test port
- Stainless steel baskets, waste containers and loading trolleys available
- Full range of options and accessories
- Vacuum models available (liquid ring vacuum pump)
|
|
FRONT LOADING PRIORCLAVE LABORATORY AUTOCLAVES
A firm favourite in laboratories throughout the food, drink, dairy, health and pharmaceutical industries, these autoclaves and are particularly useful for autoclaving heavy or bulky items.
Models are available in 100, 150 and 200 litre capacities and for electrical or direct steam heating.
- 500mm Dia. Cylindrical Chamber
- 7 or 10.5kW electric or direct steam heating
- Fully settable up to 138oC–2.4 Bar. 1-999 minutes
- TACTROL microprocessor control system with optional 5 or 10 program memory
- BioCote anti-microbial surface coating – unique to Priorclave
- Castor mounted for ease of positioning
- Two non-tipping shelves
- 12 months parts and labour warranty (parts only outside UK)
- 10 year or 10,000 cycle pressure vessel warranty
- Thermal interlock for safety with liquids in glass containers
- Pressure interlock
- Quickseal Series II single action closure
- Media Warming
- Delayed Start
- Fan cooling
- Timed Freesteaming
- Thermocouple port and test port
- Stainless steel baskets, waste containers and loading trolleys available
- Full range of options and accessories
- Vacuum models available (liquid ring vacuum pump)
|
|
These autoclaves don't just seem to be different; they are different. Specially developed
for sterilization procedures in the laboratory, processes become easier, safer, more precise,
more reproducible and validatable.
Systec DX
For all laboratory applications even for sophisticated state-of-the-art sterilization processes. With all possibilities to add additional options for process optimization to enable validatable sterilization to be carried out.
Systec DE
For basic laboratory applications and media sterilization. With limited possibilities to add additional options for process optimization.
Systec DB
For simple process applications.
No options available for process optimization.
|
|
Designed For Your Application - Three configurations are available to suit your specific temperature and cycle time requirements. Operating Temperatures to 320° C equate to shortened cycle times which result in higher throughput, higher production rates and lower overall cost; allowing you to use a smaller oven for a given level of production. In addition, the internal air supply panels distribute heat very evenly, resulting in dense loading capabilities and a high capacity per square foot of floor space.
Cycle times can be as short as 1 1/2 hours when equipped with Ultra Performance Filters and 2 1/2 hours when equipped with High Performance Filters. A unique mounting system for the HEPA filters reduces particulate concentrations and stress from thermal expansion and contraction. Despatch guarantees ISO Class 5 condition for all oven configurations throughout the cycle.
Optional touchscreen controls with an Allen Bradley PLC are powerful, yet easy to use. The system collects data for process validation, monitors operations relative to control limits, and communicates with external data processing equipment.
Thorough IQ, OQ and SQ validation packages minimize the time and effort required for installation, start-up and validation (available as an option.)
|
|
Heating ovens and drying ovens for
laboratory and production department, series VTU
These heating and drying ovens are available in 7 sizes with a comprehensive range of accessories, e.g. loading trolleys, temperature controller etc. They can be used globally for heating and drying processes in the production and research.
Working chamber volume 200 – 8.000 liters
Temperature range 250 °C, 300 °C and 350 °C
Air flow horizontal
Heating ovens and drying ovens for solvent-based
materials as per EN 1539, series VTL
These heating and drying ovens are available in 7 sizes with a comprehensive range of accessories, e.g. loading trolleys, temperature controller etc. They can be used globally for heating and drying processes in the production and research.
Working chamber volume 200 – 8.000 liters
Temperature range 250 °C, 300 °C and 350 °C
Air flow horizontal
|
|
drying ovens of drying and rooms hot for the laboratory or the production, range VTU.
These drying ovens are available year 7 volumes with a broad range of accessories and options such as carriage of loading, programmer etc... These drying ovens can be used for processes of heat treatment and drying in production and research.
Volumes of work 200-8000 liters
Page of temperature of work 250°C, 300°C and 350°C
Guidance of horizontal air.
Drying oven of drying and heat treatment for materials containing of solvents in conformity with the standard IN 1539, range VTL
These drying ovens are available year 7 volumes with a broad range of accessories and options such as carriage of loading, programmer etc... These drying ovens can be used for processes of heat treatment and drying in production and research.
Volumes of work 200-8000 liters
Beach of temperature of work 250°C, 300°C and 350°C
Guidance of horizontal air.
For more information to consult us
|
|
|
Used for research, pilot plant, or production applications, AE's Threadless Pin Closure is designed for rapid opening and closing along with high cycle life. To operate the vessel, simply remove the pin and raise the cover. This is a very easy closure to automate. With sizes up to 30" (762 mm) and pressures to 150,000 psi (10,300 bar) this is a versatile design for many applications.
|
|
DRUM DISPENSING HOT BOX
The Sahara Drum Dispensing Hot Box is designed to heat 55 galloon drums horizontally on sliding cradles to allow for easy dispensing Request a quote for Sahara Drum Heaters
FEATURES
Saves energy. Units in a manifolded arrangement can be individually turned off when not heating drums.
Rugged steel construction.
Portable. Just pick up with a forklift.
Built-in spill containment
|
|
Infrared oven VTIR 65/40-200°C
Industry:
Electronics industry
Application:
Burn in of coatings
Special features:
- working chamber: clean room DIN ISO 5
- installation in clean room class DIN ISO 6
- very fast heating up times
- controllable temperature of the products
- fully automated process
|
|
New OPAL range of laboratory autoclaves
This entry-level, four option range starts with a 35L Bench-top model and includes 55L and 95L top loading models. A 125L Bench-top model with optional mounting stand completes the range.
They have been specifically designed to perform everyday laboratory autoclaving functions such as growth media preparation and laboratory waste sterilisation. It is intended to enable laboratories, with a more basic need, to perform these operations within their own laboratory to specific requirements, without unnecessary expenditure on additional functions and control systems often fitted as standard on today's autoclaves, for more exacting procedures.
All autoclaves in the range feature automatic free steaming and a thermal safety lock and are managed by a slimmed down version of Priorclave's tried and tested TACTROL microprocessor control system. They will operate up to 138oC - 2.4 Bar.
The models are based around Priorclave's existing product range and so are fully compliant and CE marked in accordance with the European Pressure Equipment Directive (97/23/EC) and other relevant directives and standards. |
|
The OMVE HT220 laboratory pasteuriser
OMVE introduces the next generation of Heat Treatment Systems on miniature scale suitable for R&D, QA and pilot plant applications within the different industries.
The compact laboratory pasteuriser enables you to execute a trial with even less than 1 litre. This reduces the required amount of ingredients, preparation time, start-up time and processing time. Moreover, the HT220 pasteuriser allows you to conduct more trials on a day, improving your R&D productivity.
The HT220 laboratory pasteuriser is designed to give the operator maximum flexibility in processing various products. The flow rate is variable between 10 l/hr and 120 l/hr and the temperature can be set between ambient and 150 ºC.
Different heat treatment methods are available. Tube in tube, plate heat exchangers and steam injection can be installed on the same service unit together with a wide range of standard optional accessories. For optimising pilot or industrial process simulations, OMVE supplies customer specific modifications.
The HT220 pasteuriser can be seamlessly integrated with our inline homogeniser (HP-range), inline deaerator (DEA-range), buffer tanks (MPV-range) and (aseptic) filling benches (FS-range). |
|
RECTANGULAR SECTION PRIORCLAVE LABORATORY AUTOCLAVES
Perfect for high volume throughput as well as large bulky items, these autoclaves combine a huge internal capacity with a small floor area.
- 230, 285, 350, 450 & 700 litre capacities (Intermediate and larger capacities also available)
- Compact design – 235 and 350 models will fit through standard door
- Simple, hand wheel door closure (with patented Priorclave safety mechanism – Also available with vertical sliding door closure
- Powerful heaters for shortened cycle times
- 21, 31.5 or 42kW (380/415V) electric or direct steam heating
- Steam Jacketed versions available (steam heated models only)
- Fully settable up to 138°C–2.4 Bar. 1-999 minutes
- TACTROL microprocessor control system with optional 5 or 10 program memory
- BioCote anti-microbial surface coating – unique to Priorclave
- Two non-tipping shelves
- 12 months parts and labour warranty (parts only outside UK)
- 10 year or 10,000 cycle pressure vessel warranty
- Thermal interlock for safety with liquids in glass containers
- Pressure interlock
- Media Warming & Delayed Start
- Fan cooling
- Timed Freesteaming
- Thermocouple port and test port
- Stainless steel baskets, waste containers and loading trolleys available
- Full range of options and accessories
- Vacuum models available (liquid ring vacuum pump)
|
|
RECTANGULAR SECTION VERTICAL POWER DOOR PRIORCLAVE LABORATORY AUTOCLAVES
Perfect for high volume throughput as well as large bulky items, these autoclaves combine a huge internal capacity with a small floor area.
The Priorclave Hydraulic Power Door mechanism enables the door to be opened and closed at the touch of a button.
A fixed door seal is used for reliable, trouble free operation.
- 230, 285, 350, 450 & 700 litre capacities (Intermediate and larger capacities also available)
- 3 Year Guarantee on door seal
- Powerful heaters for shortened cycle times
- 21, 31.5 or 42kW (380/415V) electric or direct steam heating
- Steam Jacketed versions available (steam heated models only)
- Fully settable up to 138oC–2.4 Bar. 1-999 minutes
- TACTROL microprocessor control system with optional 5 or 10 program memory
- BioCote anti-microbial surface coating – unique to Priorclave
- Two non-tipping shelves
- 12 months parts and labour warranty (parts only outside UK)
- 10 year or 10,000 cycle pressure vessel warranty
- Thermal interlock for safety with liquids in glass containers
- Pressure interlock
- Media Warming & Delayed Start
- Fan cooling
- Timed Freesteaming
- Thermocouple port and test port
- Stainless steel baskets, waste containers and loading trolleys available
- Full range of options and accessories
- Vacuum models available (liquid ring vacuum pump)
|
|
DOUBLE-DOOR, PASS-THROUGH LABORATORY AUTOCLAVES – RECTANGULAR SECTION (380/415V, 21, 31.5 or 42kW)
Where a clean room or containment suite is being installed it is often an advantage to install a through-wall autoclave to ensure containment. Priorclave manufacture Pass-through autoclaves with rectangular section chambers in 400 to 100 litre capacities. Double Door Priorclaves have interlocks to prevent both doors being open at the same time as this would breach the integrity of the site. They also have an interlock to prevent the door at the unloading end from being opened until the sterilisation cycle has been successfully completed and the load is safe to pass into the unloading end.
Pass-through Priorclaves include all the features of the Rectangular Section Range.
Priorclave are pleased to offer our uniquely comprehensive design and advisory service to help you to correctly specify and design and autoclave to suit your particular requirements.
Each site is different with the requirement for doors to be hinged to swing in different directions and with the location of the required services. Final manufacture therefore requires full details of the proposed location and operation routines. This can be achieved by a site survey by one of our representatives or by the supply of detailed drawings.
|
|
|
|
Ovens, Autoclaves
