|
|
Microwave heating and drying cabinet,
type VHM HEPHAISTOS
The newly developed microwave system, VHM HEPHAISTOS, is an internationally patented system and characterised by a very high field homogeneity.
The high field homogeneity allows for the manufacture of high-quality CFC aircraft structures, for instance.
Advantages:
Reduction of production costs due to shorter heating, process and cooling times compared to conventional methods. Use of metal parts (e.g. metal tools and charging systems) possible in the microwave field
Specific volumetric heating of products; the furnace chamber itself is not heated
Sizes from laboratory up to large scale (e.g. aircraft industry) are available (working chamber volume of the shown systems 750 and 4200 ltr); other sizes upon request
Broad spectrum of use
Technical Data
Nominal temperature: 400 °C
Heating: microwave
Control system: S!MCON/32-Net |
|
300°C General purpose horizontal & vertical industrial ovens (GP)
A standard range of industrial ovens
Maximum operating temperature 300°C
Volumes of 220, 330 and 450 litres
Heating by mineral insulated metal sheathed elements
Good temperature uniformity
Polished stainless steel inner chamber
|
|
Internal dimensions : 2m x 2m x 2m
Working temperature : 100°C
Regulation of humidity rate : 95%
Control system : Scheduler, regulator, industrial programmable controller and recorder |
|
Monoblock Oven
* Up to 350 °C (662 °F)
* Standard line starting at 1 m3 (35.31 ft3)
* All applications: (drying, dehydration, baking, polymerisation of products with flammable substance, liquid and powder painting)
* Electronics controlled by a PLC
* Static relays or thyristor-controlled power controller
* Powered by electricity, gas, heat exchanger... |
|
Economical electric oven SNOL 2160/220 is designed for various materials and components heat treatment under low temperature, e.g. drying, preheating and other purposes.
•Circulation fan.
•Mild steel working chamber.
•Control block separated from the oven.
•Micro processor temperature controller.
•Moving bottom cart for loading up to 4 t.
•For smaller components special shelves can be placed on the moving cart.
•Two ventilation holes on the upper part.
•Vertical flow hot air circulation.
•Powder painted exterior.
•High quality thermoinsulation materials.
•Low power consumption.
•One year limited warranty and later service.
•Two years limited warranty for temperature controller and later service.
|
|
Where autoclave curing is not required, Aeroform have perfected their precision temperature oven technology in conjunction with the control systems developed for the autoclaves, providing gas and electric ovens of unparalleled performance, to any size with temperature ranges currently up to 600°C
|
|
Standard Overhead Trolley Conveyor Ovens
The ONLY Process Applied PRE-Engineered Conveyor Unit in the World!
7,512 Different Standard Configurations in ALL Fuels!
Unequaled in Quality & Features
-Temperatures To 500°F (260°C); Optional 650°F (343°C)
-Completely Factory Assembled, Tested and Shipped in Sections Ready to Use
-Internal Structure For Conveyor Mounting
-Meets Federal and Insurance Regulations
-NEMA 12 Control Panel, Completely Wired
-Honeywell Digital Temperature Controller
-Bottom Supply Plenum to Provide a Bottom-Up Air Flow Through the Work Chamber |
|
DOUBLE-DOOR, PASS-THROUGH LABORATORY AUTOCLAVES – CIRCULAR SECTION (380/415V, 10.5kW)
Where a clean room or containment suite is being installed it is often an advantage to install a through-wall autoclave to ensure containment. Priorclave manufacture Pass-through autoclaves with circular chambers in 150L and 200L capacities. Double Door Priorclaves have interlocks to prevent both doors being open at the same time as this would breach the integrity of the site. They also have an interlock to prevent the door at the unloading end from being opened until the sterilisation cycle has been successfully completed and the load is safe to pass into the unloading end.
Pass-through Priorclaves include all the features of the Front Loading Range.
Priorclave are pleased to offer our uniquely comprehensive design and advisory service to help you to correctly specify and design and autoclave to suit your particular requirements.
Each site is different with the requirement for doors to be hinged to swing in different directions and with the location of the required services. Final manufacture therefore requires full details of the proposed location and operation routines. This can be achieved by a site survey by one of our representatives or by the supply of detailed drawings.
|
|
The OMVE HT320 can be fitted with different heat treatment systems and has a very low hold-up volume. The entire system is operated by a central PLC. The UHT system is supplied with a nominal capacity of 50 l/hr or 100 l/hr at 145°C.
Unlike other systems on the market, the OMVE UHT pilot systems are based on modules that can be configured to customer specifications. All processes can be performed aseptically. |
|
The PCO2-14™ Polyimide Cure solution is a clean process oven designed for polyimide baking and curing applications. Many semiconductor manufacturing environments, front-end machines are adapted for polyimide curing. This costly process results in equipment typically not suitable for polyimide curing in terms of cleanliness, inert atmosphere capabilities, cycle time or data acquisition.
The PCO2-14™ optimizes the polyimide cure process for semiconductor wafer devices. It enables short cycle times and a consistent, reproducible cure process for all wafers in the product load by combining four essential characteristics in a single, compact design: clean process operation (Class 100 recirculated airflow), inert atmosphere capabilities (<20 ppm of oxygen), temperatures up to 350°C, and fast cycle times with +/- 1% temperature uniformity.
Like other Despatch thermal processing tools, the PCO2-14™ Polyimide Cure can be networked and controlled from a central location, minimizing the floor space required and further improving productivity. Atmosphere data can also be monitored and recorded throughout the cycle. |
|
Powder Coating Ovens
Gruenberg's 96 cubic foot modular walk in oven offers many benefits to the paint, powder, and coatings industry. Our MPC45.96 powder coating oven features a bolted flange angle construction that allows for the back wall panel to be removed to add an additional 96 cubic foot module, doubling the production capacity.
Features include:
Cold rolled steel exterior
Lift hooks for easy location
Aluminized steel interior
Ceiling capable of supporting a hanger bar loaded with 250 lbs
Two circulation fans with a total of 1200 CFM
Circulation motors totally enclosed in control panel
Split double doors available to reduce floorspace requirements
18KW of heat input per heating module
Seamless, tubular heating elements
Controlled by solid state relays
Watlow high limit thermostat for safety
All necessary fusing to protect components
Single setpoint temperature controller
Digital process timer to shut heat off at end of timed cycle |
|
Beside the precise pressure of the solder paste and the exact Pick and Place, the soldering constitutes the most sensitive and most important process at the development of a PCB. Here the producing batch size certainly plays as well a decisive role, as the underlied technology (general components, FinePitch-, Ultra-Fine-Pitch-, BGA- or even special components).
In line with the broad spectrum of our different Print and Dispensing systems and the different possibilities to Pick and Place we also offer two systems for SMD-soldering.
This is on the one hand the smaller convection oven 538 DF (table-top) and on the other hand the standard device 548 DF for higher quantities. In general this is used in lines with machines.
|
|
Specifications for Heller 1809EXL:
Overall LengthWidthHeight: 183" (465 cm)54"(137cm)63"(160 cm)
Typical Nitrogen Consumption: 700 - 900 SCFH @ 500 PPM
Maximum Board Width Standard: 22" (55.8 cm)
Top Heating Zones: 9
Bottom Heating Zones: 9
Number of Cooling Zones Standard: 2
Temperature Range Standard: 25-350° C
Heated Length: 105" (254 cm)
Maximum Conveyor Speed: 74"/Min (188 cm/min.)
Standard Features:KIC Profiling Software,Power Width Adjustment, Auto Lubrication System, Three (3) Thermocouple Profiling, Powered Hood Lift, Signal Light Tower, KIC Profiling Software
Optional Features:High Temperature Up to 450°C, Computer Controlled Width Adjust, Center Board Support, Waterless Cooling w/ Flux Separation System and more.
The 1809EXL- from Heller's newest generation of reflow ovens- provides 25% higher airflow for enhanced temperature uniformity, repeatability and high-load handling. The 1809EXL features Heller's new, enlarged heating tunnel and baffle-free design, for six-sigma consistency, zone-to-zone and oven-to-oven. It also provides more flexibility in board handling and robust construction.
The 1809EXL supports high-speed, high-volume throughput… at speeds up to 40 inches (one meter) per minute… while conserving valuable factory floor space. Rapid response times and precise temperature controls assure process uniformity, regardless of component density or board loading, with identical profile performance in either air or nitrogen. |
|
Heller 1707 EXL Specifications:
Overall LengthWidthHeight: 134"(340cm)54"(137cm)63"(160cm)
Typical Nitrogen Consumption: 700 - 900 SCFH* @ 500 PPM
Minimum/Maximum Board Width: 2" - 20" (5 - 50.8 cm)
** Requires 30" Heater Modules : 24" (61 cm)**
Top Heating Zones: 7
Bottom Heating Zones: 7
Number of Cooling Zones Standard: 1
Temperature Range Standard: 25-350° C
Standard Features:KIC Profiling Software,Power Width Adjustment, Auto Lubrication System, Three (3) Thermocouple Profiling, Powered Hood Lift, Signal Light Tower, KIC Profiling Software
Optional Features:High Temperature Up to 450°C, Computer Controlled Width Adjust, Center Board Support, Waterless Cooling w/ Flux Separation System
The 1707EXL- from Heller's newest generation of reflow ovens- provides 25% higher airflow for enhanced temperature uniformity, repeatability and high-load handling. The 1707EXL features Heller's new, enlarged heating tunnel and baffle-free design, for six-sigma consistency, zone-to-zone and oven-to-oven. The 1707EXL supports high-speed, high-volume throughput… at speeds up to 32 inches (80 centimeters) per minute, while conserving valuable factory floor space. |
|
Specifications for Heller 1913 MKIII:
Overall LengthWidthHeight: 232"(589cm)/54"(137cm)/63"(160 cm)
Typical Nitrogen Consumption: 500 - 700 SCFH @ 500 PPM
Maximum Board Width Standard: 20" (50.8 cm)
Top Heating Zones: 13
Bottom Heating Zones: 13
Number of Cooling Zones Standard: 4
Temperature Range Standard: 25-350° C
Heated Length: 140" (355.6 cm)
Maximum Conveyor Speed: 74"/Min (188 cm/min.)
Standard Features:KIC Profiling Software,Power Width Adjustment, Auto Lubrication System, Three (3) Thermocouple Profiling, Powered Hood Lift, Signal Light Tower, KIC Profiling Software
Optional Features:High Temperature Up to 450°C, Computer Controlled Width Adjust, Center Board Support, Waterless Cooling w/ Flux Separation System
Heller Industries the recognized World Leader in Reflow Soldering Oven Technology announces a true breakthrough in Reflow soldering technology with the new Mark III series. With over 12,000 systems installed worldwide, Heller has been at the leading edge of Forced Hot Air Reflow soldering technology development since 1987.
Heller utilizes a partnership approach with their customers to develop user-initiated solutions for real world applications. The Mark III system is yet another major advancement with innovative Technologies including:
-Lead Free Certified Systems
-Maintenance Free Systems
-Lowest Cost of Ownership
-Best Return on Investment
-Integrated Cpk Software
-Local Support |
|
1707 MKIII Specifications:
Overall LengthWidthHeight: 134" (340 cm)/54"(137cm)/63"(160 cm)
Typical Nitrogen Consumption: 500 - 700 SCFH @ 500 PPM
Maximum Board Width Standard: 20" (50.8 cm)
Top Heating Zones: 7
Bottom Heating Zones: 7
Number of Cooling Zones Standard: 1
Temperature Range Standard: 25-350° C
Heated Length: 72" (183 cm)
Maximum Conveyor Speed: 74"/Min (188 cm/min.)
Standard Features:KIC Profiling Software,Power Width Adjustment, Auto Lubrication System, Three (3) Thermocouple Profiling, Powered Hood Lift, Signal Light Tower, KIC Profiling Software
Optional Features:High Temperature Up to 450°C, Computer Controlled Width Adjust, Center Board Support, Waterless Cooling w/ Flux Separation System
Heller Industries the recognized World Leader in Reflow Soldering Oven Technology announces a true breakthrough in Reflow soldering technology with the new Mark III series. With over 12,000 systems installed worldwide, Heller has been at the leading edge of Forced Hot Air Reflow soldering technology development since 1987.
Heller utilizes a partnership approach with their customers to develop user-initiated solutions for real world applications. The Mark III system is yet another major advancement with innovative Technologies including:
-Lead Free Certified Systems
-Maintenance Free Systems
-Lowest Cost of Ownership
-Best Return on Investment
-Integrated Cpk Software
-Local Support |
|
Heller 1809 MKIII Specifications:
Overall LengthWidthHeight: 183"(465cm)/54"(137cm)/63"(160 cm)
Typical Nitrogen Consumption: 500 - 700 SCFH @ 500 PPM
Maximum Board Width Standard: 20" (50.8 cm)
Top Heating Zones: 9
Bottom Heating Zones: 9
Number of Cooling Zones Standard: 3
Temperature Range Standard: 25-350° C
Heated Length: 105" (254 cm)
Maximum Conveyor Speed: 74"/Min (188 cm/min.)
Standard Features:KIC Profiling Software,Power Width Adjustment, Auto Lubrication System, Three (3) Thermocouple Profiling, Powered Hood Lift, Signal Light Tower, KIC Profiling Software
Optional Features:High Temperature Up to 450°C, Computer Controlled Width Adjust, Center Board Support, Waterless Cooling w/ Flux Separation System, and more.
Heller Industries the recognized World Leader in Reflow Soldering Oven Technology announces a true breakthrough in Reflow soldering technology with the new Mark III series. With over 12,000 systems installed worldwide, Heller has been at the leading edge of Forced Hot Air Reflow soldering technology development since 1987.
Heller utilizes a partnership approach with their customers to develop user-initiated solutions for real world applications. The Mark III system is yet another major advancement with innovative Technologies including:
-Lead Free Certified Systems
-Maintenance Free Systems
-Lowest Cost of Ownership
-Best Return on Investment
-Integrated Cpk Software
-Local Support |
|
LCC/LCD Stackable Clean Process Oven
Despatch's LCC and LCD Stackable Clean Process Ovens have a stainless steel interior and exterior, rugged, programmable process controls and provide a variety of tailored options for your specific needs. For production environment processes where minimal contamination is essential, the LCC and LCD Series ovens offer the highest standards in HEPA filtration. Re-circulated airflow is 100% HEPA filtered for operation at ISO Class 5 (Class 100) or better within the oven chamber. Typical applications for these ovens include die-bond curing and other semiconductor packaging processes, depyrogenation, sterilization and drying for life sciences. The ovens are SEMI S2 and CE compliant for universal acceptance and configured for 220/240 volts and 50/60 hz.
These units are stackable to save valuable floor space. The recirculation motor is mounted at the rear of the oven, providing convenient access and allowing up to three ovens to be stacked on top of one another.
It is available in two different atmosphere configurations:
Air Atmosphere - A forced exhaust fan is included on the air temperature unit for rapid cooling.
Inert Atmosphere - Allows nitrogen (or other inert gas) to be injected into the chamber to lower the oxygen level to prevent oxidation of products. A water cooling coil is provided for rapid cooling. Control of nitrogen flow and water cooling is programmable through the Protocol Plus™ controller. |
|
The Despatch barrier-ready Depyrogenation Tunnel is a Class 100, integrated, continuous system that uses heated airflow in the depyrogenation of pharmaceutical glassware.
Five Patented Features:
Cool zone self-sterilization: The tunnel can be programmed to automatically sterilize the cool zone when the tunnel is not in use. Dry heat provides more complete sterilization.
Hermetically sealing, self-sterilizing exit gate: An automatic gate hermetically seals the tunnel exit when it is not in use.
Unique conveying: The upturned edges of the conveyor move with the glassware to keep them tightly packed, with minimal friction. This reduces breakage, scratching and the number of airborne particles.
Dynamic pressure balance: A fully automated pressure system adapts to fill room/ barrier isolator pressures ranging from 0.05 to 0.50 inches of water column. The system stays in balance despite changing pressures in the surrounding areas. No manual damper adjustments are required.
Linear cooling of the vials: As vials move from the hot zone to the cool zone, they are subjected to significant thermal stress, which could cause cracking or implosion. Despatch's near linear cooling process reduces temperatures as quickly as possible, with reduced stress. |
|
Absolutely safe sterilisation at 160 °C to 180 °C, as well as pyrogenicisation at 210 °C.
From very small to very large, our S sterilisers guarantee absolutely safe and reliable hot-air sterilisation of containers and instruments. Choose from: 8 model sizes (14l to 749l); 3 performance classes; Basic/Excellent/Perfect; Natural convection or forced air circulation N/F. |
|
Dry-Heat-Sterilisers
The sterilisers supplied by Vötsch have a GMP-/FDA-suitable design and offer the advantage of a quick, reliable and cost-effective sterilisation.
Depending on the model, working chamber volumes of 560 to 3125 liters are available. The Vötsch sterilisers fulfil standardly the requirements of the clean room class DIN ISO 7. With the use of special recirculation air filter, even the requirements of the clean room class DIN ISO 5 are fulfilled.
Sterilisation temperatures of 230 °C and 250 °C can be realised depending on the customer’s requirements. Additionally, the Vötsch sterilisers are suitable to be used for depyrogenisation at temperatures of 300 °C and 350 °C.
A variety of options and accessories, such as steel wire mesh shelves, charging trolleys, transport trolleys, filters, Vötsch software package, qualification documentation etc. completes the comprehensive product spectrum.
Vötsch developed the unique two-chamber-system which facilitates a particularly economic sterilisation process and high throughput. The sterilisation chamber retains its sterilising temperature and whilst the sterilised products are cooling down in the cooling chamber, the sterilising chamber can be recharged.
|
|
Sterilizer with hot air.
The sterilizers of mark VÖTSCH are to standards GMP/FDA
Volumes available from 560 to 3125 liters.
Cycles of temperature of 230°C and 250°C can be realized according to the requests of the customers.
They are also adapted for the depyrogeneisation to +300°C and 350°C.
Many options and accessories such as carriage of loading, racks or plates stainless, filters, documents of qualification.
For more information to consult us. |
|
The Barnstead/Harvey Sterilization Line offers a complete line of sterilization products for the dental, laboratory and medical markets.
PVdry2™ Class B Pre & Post vacuum steam sterilizers
Sterilemax™ large capacity, 12" diameter steam sterilizers
Chemiclave® chemical sterilizer - always dry packs, most reliable in the industry |
|
| The SD series of large sterilizers are built to the latest European EN 285 standards and employ the ultimate in microprocessor control systems. Standard chamber volumes range from 160 litre to 800 litre with large units in excess of 2000 litres custom made for specific applications. |
|
Gruenberg Oven Company designs and manufactures a complete line of standard and custom pharmaceutical sterilizers and depyrogenation ovens. Configurations include laboratory, cabinet, truck-in, pass-through, and continuous arrangements. Sterilizers and depyrogenation ovens are designed to reach maximum temperatures up to 280° C. In addition, control systems can be self-sufficient relay logic or PLC, or can be integrated with your process PLC.
Pharmaceutical Sterilizers and Depyrogenation Ovens Features:
Heavy-duty, fully-welded, structural steel frame
Exteriors constructed of 16 and 18 304L stainless steel with a #4 polish to withstand frequent wash downs
Side walls and loading tracks are removable for easy clean-up and maintenance.
HEPA filters installed on the air intake, exhaust, and recirculation air flow to ensure a class 100 environment
Interior chamber seams are 100% continuously heliarc welded to eliminate risk of process contamination
Custom trucks, trays, and transfer carts are available |
|
TOP LOADING PRIORCLAVE LABORATORY AUTOCLAVES
A firm favourite in laboratories throughout the food, drink, dairy, health and pharmaceutical industries, these autoclaves feature a 500mm vessel diameter enabling low loading heights for increased operator comfort. Models are available in 100 and 150 litre capacities and for electrical or direct steam heating.
- Compact for where space is at a premium
- 7 or 10.5kW or direct steam heating.
- Fully settable up to 138C–2.4 Bar. 1-999 minutes
- TACTROL microprocessor control system with optional 5/10 program memory
- BioCote anti-microbial surface coating – unique to Priorclave
- 12 months parts and labour warranty (parts only outside UK)
- 10 year or 10,000 cycle pressure vessel warranty
- Thermal interlock for safety with liquids in glass containers
- Pressure interlock
- Quickseal Series II single action closure
- Media Warming and Delayed Start
- Fan cooling
- Timed Freesteaming
- Thermocouple port and test port
- Load support plate and 2/3 baskets
- Stainless steel waste container available
- Full range of options and accessories
- Vacuum models available (liquid ring vacuum pump)
|
|
Internal dimensions :
Ø=2500 mm x L=2500 mm
Working temperature : 250°C
Working pressure : 10 bars
Control system :
Regulation by industrial programmable controller and datas safety |
|
|
|
Ovens, Autoclaves
