|
|
The thermostats of the LAUDA Ecoline Staredition combine top technological performance with the ultimate in economicalness. The wide application range covers temperatures from -40 up to 200 °C. The efficiency and high degree of user-friendliness combined with extensive safety functions make the Ecoline Staredition a popular choice.
LAUDA Ecoline Staredition thermostats offer you the top digital technology that is indispensable in the laboratory of today. In the form of the E 100, E 200 and E 300, choose between three particularly economical performance packages, depending on your requirement – for standard applications or even complex thermostating tasks.
LAUDA offers with its Ecoline Staredition series a variety of different immersion thermostats – and matching baths. They are available in various materials and bath volumes (3,5 L - 40 L) and thus form a complete custom-made solution for all thermostating tasks up to 200 °C, in combination with the immersion thermostats of the Ecoline Staredition range. Furthermore, LAUDA baths are also suitable for operation with older immersion thermostats from LAUDA – or from other manufacturers.
LAUDA Ecoline Staredition units with transparent baths provide the necessary visibility in all cases where test samples need to be observed during thermostating. LAUDA Ecoline Staredition thermostatic baths are available with baths of high-quality stainless steel, whether this involves the lower-priced variants that can be used up to 150 °C or highquality versions with insulation for temperatures up to 200 °C. Whichever you choose, you have in any case chosen the economic leading-edge technology of the LAUDA brand. |
|
The new galaxy of laboratory thermostats: LAUDA Alpha
Modern design - Prevailing technology - Favourable price
LAUDA Alpha - for cost effective thermostating in the laboratory from -25 up to 85 °C
Easy:
The clear structured 3 key operation and the large LED display allow simple operation and menu navigation of the Alpha thermostats.
Clever:
The front panel of the cooling thermostats is removable without any tools. This ensures a very easy cleaning of the condenser.
Flexible:
An outlet connection at the rear side of the cooling thermostats allows straightforward draining of the heat transfer liquid.
Complete:
For the heating thermostats a pump circulation set and a cooling coil for cooling of the bath are available as accessories.
The Alpha range at a glance:
Alpha immersion thermostat
Suitable for all kind of baths. Simple fixation with the screw clamp as standard.
Alpha heating thermostats
from 25 up to 85 °C
Heating thermostats made of high quality stainless steel for a multitude of applications.
Alpha cooling thermostats
from -25 up to 85 °C
High cooling capacities of 225, 325 or 425 Watts.
Modern design, high quality and functional technology combined with an intelligent energy saving system and an increase of the pump pressure of more than 30 % compared to the Class A make the heating and cooling thermostats a perfect instrument for routine applications in the laboratory. And everything for the best price-performance ratio in this category.
With the new Alpha range, successor of the Class A thermostats, LAUDA presents the new generation of instruments for almost all thermostating tasks in chemistry/pharmacy, medicine,
quality assurance and analytics. |
|
| Electrothermal - an ISO-9001 registered manufacturer of general laboratory heating mantles and melting point apparatus; and specialized constant temperature products for Compound Synthesis. |
|
Technical specifications:
- Proportional electronic regulator
- Value of temperature setting by push buttons
- Temperature reading on digital display (precision 0,1°C)
- Single actuating push button
- Useful bath tank dimensions: W 300 x H 350 x D 190 mm (about 9 bottles)
- Necessary water: about 20 litres
- Revolving wheels to help shifting
- Pump for empting the tank and for the outside water circulation
Total dimensions:
- 320 x 510 x 730 mm (w x d x h)
- net weight 37 Kg
- Power supply: 220V - 15%/ + 10%
- Power consumption: 1600W
|
|
CTF models
Maximum operating temperature of 1200°C
Tube diameters of 65, 75 and 100mm
Heated lengths of 550, 700 & 900mm
These models utilise a resistance wire heating element wound around a ceramic worktube, forming an integral part of the heating element to ensure excellent thermal uniformity
Rapid heat up to operating temperature
Can be adapted to allow a non-oxidising atmosphere or vacuum, by fitting an additional worktube and end seals
The thermocouple is located in a protected position between the outside of the worktube and heating element, allowing the full worktube diameter to be used
Normally built on the horizontal base pictured left, this furnace range can optionally be mounted vertically with a separate control box
Applications in materials research include testing of novel materials under strict temperature and varying atmosphere conditions
Applications in the electronics industry include testing electronic components and semiconductor materials under inert atmospheres or vacuum
Applications in instrumentation include testing of temperature sensors such as thermocouples and PT100's, which may require enhanced thermal uniformity |
|
| Parr Tubular Reactors combine continuous flow reactions with an endless number of customization possibilities. Tubular reactors are always used in a continuous flow mode with reagents flowing in and products being removed. Flow can be single phase or two-phased, single wall or jacketed. |
|
LAUDA Aqualine - the universal water baths for the laboratory up to 95 °C.
The LAUDA Aqualine is the start of the thermostating chain for research and industrial purposes, and offers an economical introduction into the world of thermostating. Easy operation via the digital LED display enables fast start-up without the need for complicated settings.
Typical applications: the preparation of cytobiological or medical samples for analysis, pre-thermostating of environmental samples for spectroscopic analysis
Safety at all costs:
The innovative casing concept of the LAUDA Aqualine unites design and robustness. The recessed operating elements protect the electronics from dripping water and dirt. This increases the service life of the devices, and makes working safe. Reliable continuous operation with water (safety class I, NFL) is enabled thanks to the integrated overtemperature protection.
Important advantages:
✜ Easy operation via digital LED display
✜ Integrated overtemperature protection
✜ Large, optimum use of space
✜ Easy to clean, since the bath vessel does not have any fittings
✜ Homogenous temperature distribution thanks to heat elements underneath the bath
✜ Optimised shape of the bath cover prevents condensation from dripping into the samples
Standard accessories: Stainless steel gable casing |
|
Memmert waterbaths are available in six model sizes and two performance classes. In addition to the Basic class for standard thermostating tasks, the Excellent version provides precise test procedures with a maximum of safety: electronic overtemperature control and a wide range of visual and acoustic signals, for example if the filling level is too low, for overtemperature, but also for input acknowledgement or the end of the programme. In the largest model an optional circulation pump provides an even better thermal uniformity of the water. Choose from: 6 model sizes (7l to 45l); A extensive range of optional accessories, e.g. flat or gable lid, shaking device, reversible shelf, test tube racks; State-of-the-art control technology of the Basic and Excellent performance classes for all models
Can be optionally equipped with water level control.
The superior heating concept of the Memmert ovens is also to be found in the waterbaths. Protected from water, but still close to the load, the heating lies under deep drawn and easy to clean ribs. Through the positioning of the heating elements in the floor and side walls, a natural mixing of the tempering fluid arises, providing better temperature uniformity in the bath.
|
|
The SHEL LAB Water Baths are truly unique in construction. We were the first to introduce the non-contact recessed heating element to the analytical research marketplace. This design specifically curtails element burnout and eliminates tank hot spots that are chronic challenges for other water baths.
Water baths are used in a wide array of situations such as: Industrial, Clinical Laboratories, Academic Facilities, Government Research Laboratories, Environmental Applications, Food Technology and Wastewater Facilities. The SHEL LAB brand of water baths are available in three distinct categories: Analog, Digital and Special Application Baths.
Applications include: Sample Thawing, Bacteriological Examinations, Warming Reagents, Coliform Determinations, Microbiological Assays. |
|
- Seamless stainless steel chamber
- Capacities from 10 to 40 litre
- Microprocessor control with digital read-out
- Temperature range up to 80°C (standard)
- Temperature accuracy 0.2°C
- Optional flat or gabled lids
- Circulation options for increased spatial stability |
|
| ... products without technical information |
| |
|
|
Thermal equipment for laboratories
