|
|
Wichard offers a wide range of carbine hooks, designed and made in France:
> Several models available: symmetric, asymmetric, without eye
> Perfect for fast operations
|
|
|
|
|
|
Controlled descents
For both work at height and rescue, access from above is preferred becaus e it allows one to take advantage of the force of gravity. Descenders are designed to regulate friction and control descent on a fixed rope. They also allow one to be positioned at certain points on the rope to perform work operations. With some descenders it also possible to belay a leader progressing using rock climbing techniques.
Petzl offers two types of descenders:
self-braking descenders,
standard descenders..
The Petzl difference
1- Swinging side plate with safety clip
Reduces the risk of dropping the device. Practical for quick installation of the rope. Efficient means of passing intermediate anchors.
2- Multi-functional handle (I'D)
Allows the rope to be released to begin the descent. Anti-panic function: if the user pulls too hard on the handle, the cam will lock on the rope. Locking position is used to lock off the user at any point on the rope without tying off.
3- Anti-error safety catch (I'D)
Reduces the risk of an accident due to incorrect installation of the device on the rope.
|
|
Wichard proposes the snap hook doubles sécurité*: The opening of only one hand is done while pressing simultaneously on the spring with torsion and the lever located at the back. > Easy Ouvertue with only one hand > No the risk of accidental opening > The eye allows the passage of a strap > Exist 3 colors: blue (ref.: 2455), yellow (ref.: 2454) and phosphorescent (ref.: 2454)
*: the snap hook doubles Wichard safety is not an EAR
|
|
Product Description:
Manufactured from premium grade high tenacity nylon fiber treated with a proprietary Marine-Tech coating to improve fiber-to-fiber abrasion resistance.
Features:
Long wearing
Supple, easy to handle
Excellent abrasion resistance
Applications:
Vertical Lifeline
Fall Protection
Colors Available:
White
Black
Lengths Available:
1200'
600'
|
|
Steel Mesh Barrier S System
Based around a square concept, the S System is designed for simple assembly and can be adapted to suite your requirements.
Steel Mesh Barrier C System
The C System is based on circular tubes that are compatible with scaffolding tubes.
|
|
|
|
|
|
The VersiRail system restricts access to fall hazards and provides an aesthetic collective protection solution for worker safety at height. It is quick and easy to install and can be used on virtually any flat roof surface up to a 4° pitch.
Aesthetics and installation flexibility are crucial factors in VersiRail's design. The system is available in three finishes: untreated, polished or powder coated to a specific RAL colour and in four different flexible solutions; straight upright, curved upright, inclined upright and folding (freestanding only). The combination of finish and style options ensure that the VersiRail system will full intergrate into any building design. Similarly, the wide range of available components enables the system layout to be configured to ideally suit the collective protection need.
Constructed from aluminium, the system is lightweight and easy to transport. Installation is quick and easy with VersiRail available as a freestanding or fixed system.
VersiRail system is a non-penetrative barrier system for guarding users against falls from height.
Design and installation has been indepenently tested and conforms to EN 13374.
Applicable for use on flat roofs up to a maximum pitch of 4°.
Counterbalances can be positioned on the inside or outside of the VersiRail.
Easy to assemble on site - uses EZ-FIX components.
Can be configured to provide a guarded walkway across a roof as well a roof edge guard.
Choice of corner units provide uninterrupted protection.
End sections can be fixed directly to a wall where appropriate.
|
|
Harness BASIC 2
Very simple harness provided with 2 anchorings positioned respectively in the back on the level of the scapulas and on the sternum.
Conform to the standard of THEM 361.
|
|
|
|
|
|
Harnesses designed for every type of work
Harnesses are the direct interface between the worker and the protection system. It should provide the worker with a maximum amount of safety without hindering their movement.
Petzl has several types of harness for different work situations. Accessories allow to adapt harnesses for specific needs.
work positioning and fall arrest harnesses,
work positioning sit harnesses,
chest harnesses,
fall arrest harnesses,
special rescue harnesses,
accessories.
The Petzl difference
1- 2- DoubleBack and FAST buckles: quick to put on and adjust
All Petzl harnesses have adjustable shoulder straps, waist belts and leg loops. All adjustment buckles use the DoubleBack self-locking system. With this system, the webbing does not need to be rethreaded to secure the buckles - they can be adjusted with a single motion.
Certain harnesses are equipped with the FAST automatic buckles on the leg loops. Once adjusted, these buckles easily and quickly open and close - the harness can be put on without undoing all the buckles.
3- Lightweight and comfortable
Petzl harnesses are particularly lightweight - now wearing a harness is no longer a constraint. Work positioning harnesses are made with perforated foam for breathability.
The foam-padded shoulder straps offer improved comfort and curve around the neck to reduce friction points. The harness is also easier to put on.
Thermo-molded waist belt support at lumbar region for excellent comfort when suspended.
4- 5- Simplicity
Our large, contoured attachment points are easy to clip.
Three gear loops : one on each side and one at the rear.
Thin, rigid gear loops facilitate attaching carabiners.
Waist belt equipped with numerous slots for tool carriers (CARITOOL).
The rear buckle connects TOP chest harness to SIT harness. Weight carried on the waist belt is transferred to the shoulder straps. A restraint lanyard can be clipped to the buckle.
|
|
Restraint and work positioning lanyards
Restraint and work positioning lanyards are used with a work positioning harness.
They are designed to limit movement or for hands free work while in position.
There are adjustable and nonadjustable lanyards.
|
|
The Alsipercha is a "zero" factor fall arrest system is ideal to be used on perimeters. It provides total safety when placing:
- decking panels
- edge protection
- slab edges
- stop-ends and
Generally all situations that may arise during the formworking process, where there is a risk of a fall from height.
It is easy to assemble and use. No external assembly accessories are required.
|
|
Latchways ManSafe systems provide the total solution for all horizontal safety at height industrial applications. The system's versatility and ease of use makes it ideal for protecting workers as they go about day-today activities such as maintenance, cleaning, access and inspection.
Systems can be designed for up to five simultaneous users.
Fixes to virtually all types of structure and roofing system.
Follows the contours of the building by going around bends and up and down inclines.
Can be extended to include vertical sections.
The unique Latchways Transfastener allows workers to travel the full length of the system without having to detach and re-attach.
Normally incorporates the unique Latchways Constant Force Post for assured fall arrest protection and simplified installation.
Where the Constant Force post is not applicable, in-line shock absorbers or a Constant Force energy absorber can be incorporated for equal safety assurance.
Meets all appropriate international standards.
|
|
The life line of reference
Indeformable, SECURIFIL® aluminum immediately remains operational after the fall of a user. It consequently makes it possible to carry help so necessary.
SECURIFIL® aluminum is guaranteed 10 years. This guarantee is renewable 10 years after a simple inspection of our services. It is installed on all the types of zones of intervention: terrace, roof, frontage etc
Realized out of stainless steel and aluminum
It protects the cable by absorbing the efforts during a fall. Fixed at a part of end SECURIFIL® aluminum.
|
|
The Safety Net Fan is available as a Fall Arrest, Fall Protection or Street Protection Fan.
- Fall Arrest Fan: The Fall Arrest Safety Net Fans allows for falls of up to 6 metres.
- Protection Fan: Designed as a catch net for falling objects and debris.
- Street Protection Fan: To provide pedestrians protection from falling objects.
|
|
Personnel Man Safety Netting
Personnel Man Safety Netting is made from high tensity polypropylene. A squared mesh complete with 30Kn border rope and 2m tie cords fitted at every 2m.
This netting has a UV treatment and polypropylene does not absorb water, it also has a high resistance to alkaline and acid.
Mesh diameter 5mm 4.75mm
Mesh square 100mm 100mm
|
|
Our HORIZONTAL FLEXIBLE ANCHORS for the individual protection against height falls are under the norm IN 795 class C, satisfy the dispositions corresponding to directive 89/686 the EEC.
Systems of protection for any person who works in height, near an edge open or exhibited to the fall risk such as tile roofs, tracks of tread, traveling cranes, maintenance in ceilings of wagons and buses, load and unloading of trucks, etc.
Our devices have reducing Anchorages of Unit load to tile roofs constructed in outlined plate, panel sandwich or lap joint, without needing abrir the cover to anchor the system since these anchor by means of rivets or clips on the same plate, guaranteeing of this form the integrity of the tile roof without leaks.
All our equipment is certificates by notified organisms.
|
|
|
|
|
|
The ManSafe Freestanding Constant Force Post provides assured worker safety at height where there is an occasional or temporary requirement to access flat roofs or structures.
At the heart of the system is Latchways' unique Constant Force technology. The Constant Force Post is contained within an anchor device consisting of a galvanised steel frame and galvanised steel weights bolted in a circular formation onto rubber coated base weights. In the event of a fall, the Constant Force Post deploys to limit the load on the system while the weights simultaneously create a friction anchor between the unit and the roof surface.
Applicable where there is an occasional safety at height requirement.
Suitable for flat roofs (maximum 5° pitch).
Can be used on a wide range of roof surfaces including concrete, single-ply membrane, bituminous membrane, sanded and stone chipping asphalt, and steel profile.
No need to puncture the roof membrane to fix the system.
Special rotating anchor turns through 90° for maximum user flexibility.
Each anchor device protects a single user.
Conforms to BS EN 795 class E.
|
|
|
The travflex® lifeline is a development of the travsafe lifeline. The travflex® is a stanchion (interface) designed for installing a trafsave® liveline on a steel trough roof. The travflex® stanchion is secured onto the metal framework with self tapping screws without having to cut into the trough.
|
|
|
Anti-fall unit with galvanised steel rope with automatic self-rewinding movement and braking system with multiple discs. The internal parts are completely made of stainless steel, designed to support all weather conditions. The device guarantees high sensitivity and automatic calibration. It is provided with safety spring catch for connection to the safety harness (e.g. our model DPC 080); the use of the safety harness is compulsory.
|
|
|
Snap hook zycral car Conforms to the standard INTO 362.
|
|
|
|
|
|
The essential link in any safety system
Connectors vary according to their shape, size and locking system. The size of the gate opening determines what they can be clipped to.
Aluminum carabiners are made of an alloy ensuring an excellent strength to weight ratio. Since they are lightweight and will not interfere with progression, they can be used on harnesses, at the end of a lanyard or to construct temporary anchors.
The heavier steel connectors are most often used in anchor systems. Quick links can be left in place for extended periods of time.
The Petzl difference
1- 2- Manual or automatic locking
Petzl offers two types of locking systems:
- manual, which requires the user to lock the gate closed,
- automatic, which automatically locks the gate closed.
The automatic locking system is recommended for carabiners that are used frequently.
The manual system is recommended for dirty environments (mud, ice).
3- Keylock System
All aluminum Petzl carabiners use the Keylock system. The body / gate interface does not have a hook that could snag on anchors, ropes, harnesses, etc.
4- Different shapes for different uses
Symmetrical, small or large pear-shaped or D-shaped, each form corresponds to a specific use: to connect a device to a harness, attach a pulley or to use at the end of a lanyard, etc.
|
|
The Net Barrier System offers a flexible edge protection solution to all manner of roof construction and, when combined with the internal safety netting, provides a confident cocoon within which the roofer can operate in complete safety.
It not only protects the roofers from falls, but also offers a high degree of material containment and protection for those working below.
|
|
|
|
|
|
Ascending ropes and hauling systems
Rope clamps are principally used for two purposes: ascending ropes and hauling systems.
Petzl offers two types of devices:
frame-loaded rope clamps,
cam-loaded rope clamps.
For ascending ropes, frame-loaded rope clamps are the most commonly used. They are easy and quick to use, facilitating the passage of intermediate anchors and the transition from rope climbing with a clamp to descending. The cam-loaded rope clamps are recommended for hauling systems and creating adjustable lanyards. Installing them is slower due to the fact that the rope is captured in the device. However because of this, they can be almost permanently attached to the rope. Both types of rope clamps are for use on single ropes.
The Petzl difference
1- One-handed installation at any point on the rope
The spring-loaded catch allows the frame-loaded rope clamps to be installed and taken off at any point on the rope.
2- 3- 4- Ergonomically designed for different uses
The frame-loaded rope clamps have been ergonomically designed for different uses:
- molded handle on the ASCENSION for an comfortable grip,
- the attachment hole on the CROLL is oriented so the device lies flat against the chest,
- the PANTIN's compact rope clamp will not get in the way.
|
|
Safety Cushions are used for rescue work when ladders are not available or if they cannot be used due to lack of space.
The Safety Cushions are pro-duced in two standard sizes and with two different landing areas and visual areas - the "blue circle" and the "black cross".
|
|
Fall Harness to EN-361, fall arrest harness, fall arrest lanyard, fall protection equipments.
A safety harness is a form of protective equipment designed to protect a person, animal, or object from injury or damage. The harness is an attachment between a stationary and non-stationary object and is usually fabricated from rope, cable or webbing and locking hardware. Some safety harnesses are used in combination with a shock absorber, which is used to regulate deceleration when the end of the rope is reached.
|
|
HT 22
Details
Safety harness for use as personal protective equipment, restraint or front suspension
HT 31
Details
Safety harness only for use as personal protective equipmen
HT 42
Details
Safety harness for use as personal protective equipment, restraint or front suspension
HT 22 A
Details
Multiple use harness.
* Complies with EN 361 Standard
* 1 dorsal and sternal "forged D clip"
* 4 adjustement points
* Sub-pelvic strap
* automatic buckles
|
|
|
|
|
|
Our SLIDING ANTI-FALL DEVICES on line of rigid anchorage, under the norm IN 353-1 for the individual protection against height falls, satisfy the dispositions corresponding to directive 89/686 the EEC.
Systems to facilitate the vertical access of safe form in work places where the protection against falls of the workers is due to guarantee, such as: Aeolian towers, chimneys, towers of telecommunications, covers, tracks of tread, traveling cranes, access to wells, etc.
All our equipment is certificates by notified organisms.
Our range includes:
System FABA A12: Stairs with integrated security system or anti-fall rail in the heat of the moment to mount to existing stairs in galvanized steel or stainless steel. The system offers to the worker a optimum protection and a great freedom of movement, the hands are available and they do not have to be used to take hold itself to the stairs, reason why the power is made possible to take with himself the material and tool, and in addition, in case of fall the system on the other allows to the rescue person without needing using other additional systems and disconnecting the arresting gear.
System EASYCLIMBER: Stainless steel cable quality AISI-316L with absorber of reajustable energy in case of fall and that less than reduces the load on the structure to 6Kn. The system allows its use by 4 people although consecutive falls take place, being able to realize the rescue using the same like anti-fall protection. These qualities cause that the system has an economic maintenance in relation to other systems that in case of fall this are unutilised
|
|
|
|
|
|
The Latchways ManSafe for Ladders system provides outstanding personal safety for individuals working on any type of fixed industrial ladder. Applications include chimneys, towers, cranes and silos.
Such is the simplicity of the design concept that ManSafe for Ladders can be installed to follow the contours of the structure to which it is attached and so maximise its safety value in a working environment.
Equally, the proven effectiveness of the system's LadderLatch unit with its unique Latchways starwheel component provides workers with the security of being constantly attached to the system while also having both hands free to go about their duties. If a worker should fall from the system, the LadderLatch unit immediately locks onto the system cable and arrests the fall.
In the event of a fall, a worker attached to a ManSafe for Ladders system is far less likely to be injured during the fall arrest process compared to a fall from a traditional hoop system. Whereas hoop systems prevent a worker falling backwards off a ladder, the hoops themselves present a significant threat if the worker should fall down a ladder.
|
|
Flexible scale with double straps.
It is about a scale especially designed for the sloping roofs. Double SECURECHELLE® marries the shape of the roof with a great stability.
To note, that the speakers must always be hung to a rail anchor in conformity with the standard INTO 795 by protective gears individual in conformity.
|
|
|
|
Fall arrest equipment
