|
|
| Products 91 to 120 of 162 |
The automated early fire detection system WASTE-SCAN is based on the principle of infrared thermography. It provides a continuous, non-contact temperature measurement at the surface of a waste collection, even over large distances.
Main item of the system is the high-resolution thermographic camera VarioCAM® hr head manufactured by the German company JENOPTIK Laser, Optik, Systeme GmbH. It is based on an uncooled microbolometer detector FPA.
The thermographic camera VarioCAM® hr head has the following performance parameters:
(384 x 288) or (640 x 480) pixels for high geometrical resolution
high-contrast, low-noise thermal image
localisation of hot spots, even under dusty or smokey conditions
spectral range (7.5 ... 14) µm
real-time data acquisition at 50 / 60 Hz frame rate
internal automatic calibration.
|
|
The Model FL3100H is an Ultraviolet / Infrared flame detector designed to detect fires and provide alarm outputs directly from the detector while maintaining false alarm immunity. It detects fires by monitoring in both the ultraviolet (UV) and infrared (IR) spectral ranges, making it highly immune to false alarms. There is also a hydrogen-specific detector available that detects hydrogen fires.
FL3100 Series flame detectors' electronics are integral within their explosion-proof housings, allowing detector information to be processed at the point of detection. The detectors also provide a 4-20mA stepped output signal indicating detector status. The COPM (Continuous Optical Path Monitoring) self-test feature checks the optical path integrity (window cleanliness) and the detectors' electronic circuitry once every minute.
|
|
|
|
|
|
UV/IR FLAME DETECTOR
Net Safety's Ultra-violet/Infrared ( UV/IR ) flame detector delivers high performance security with functions and features that set it apart. The flame detection reacts to both UV and IR flame radiation delivering accurate and reliable fire monitoring, yet is immune to arc welding, hot body radiation, lightning or sunlight. Two spectrums of radiation must be recognized and confirmed by precisely tuned sensors for the UV/IR to initiate a fire condition, greatly reducing false alarms while providing critical safety performance to your site and personnel.
Enclosed in a rugged, explosion-proof housing, the Net Safety UV/IR flame detectors use the latest in modular microprocessor and UV/IR sensor technology — delivering accurate and reliable monitoring for hydrocarbon fires. It's capable of stand-alone operation or can be connected to a variety of control devices to create a dependable fire monitoring system. The user can define sensitivity and time delay settings and the built-in testing routines ensure continous operation.
The UV/IR Flame Detector has a extra wide field of view - up to 120 degrees, it has one of the lowest power consumption levels available on the market and a wide voltage range - all of these factors can lower your overall cost of ownership during design, installation and power draw requirements. This can add up to thousands of dollars PER DETECTOR over it's installation.
Net Safety has engineered a superior and affordable, UV/IR flame detector that is simple to operate and maintain while delivering all the security and performance required for high-risk, industrial installations!
|
|
The design of this new generation of detectors provides 3 main features :
• Performances
• Guaranteed detection
• Easy installation, use and maintenance.
The efficiency of SIMTRONICS flame detectors offers :
• High sensitivity,
• Very short response time,
• Reliability,
• Immunity from interferences
It also guarantees protection against fire risks in industrial environments and enables the control of fire fighting.
The housings are treated specifically to resist corrosive factors (stainless steel or aluminium housings).
These TV63 UV / 2xIR detectors have a wide viewing angle (110°) and a range higher than 45 m.
The integrated relays and a 4-20mA output enable the control of the TV63 by the control units or by PLC.
The detectors are equipped with an automatic test control, which regularly checks the functionality of detection, as well as the optical and electronic integrity of the system.
The detector’s non-stop auto-tests & intrinsic quality feature SIL 2.
|
|
95ir/95uv/95ds insight scanners
The Fireye InSight Type 95IR, 95UV, and 95DS flame scanners are microprocessor based flame scanners utilizing solid state infrared (IR), ultraviolet (UV) or dual (IR and UV) sensors.
|
|
|
The Model FL4000 is an advanced multi-spectral infrared (MSIR) flame detector designed to provide superior false alarm immunity with the widest field of view. The FL4000 employs a multi-spectral optical IR sensing array with a sophisticated Neural Network Technology (NNT) system to reliably discriminate between actual flames and the vast majority of false alarm sources (such as arc welding). The FL4000 is designed to detect typical fires such as alcohol, n-heptane, gasoline, jet fuels and hydrocarbons. In addition, the FL4000 can see through dense smoke produced by diesel, rubber, plastics and lube oil fires.
|
|
|
|
|
|
PHOENIX TRIPLE IR (MULTISPECTRUM FLAME DETECTOR
Very serious risks to human life, productivity and equipment are always present at industrial facilities that store, transport and process flammable or explosive chemicals. Automatic flame detection and protective action must be initiated within seconds whenever a fire ignites. Net Safety's Phoenix Triple IR Multi-spectrum flame detector provides the reliable and instantaneous flame detection response that is required in high-risk environments while utilizing advanced technologies to reduce false alarm events and provide rock-solid performance in any environment.
The Phoenix will only alarm when input conditions from three distinct IR wavelengths found in fires are satisfied. The Phoenix also incorporates our unique Automatic Digital Zoom (ADZ) technology which provides accurate detection of small and massive flames in the most difficult working situations where other detectors fail. Three precisely tuned IR sensors, ADZ technology, Automatic Visual Integrity, user selectable sensitivity and time delay provide unparalleled false alarm immunity and detection performance.
The Phoenix Triple IR is the ONLY flame detector on the market that does not have an external reflector or light source. Experience has shown that external reflectors and light sources often become obscured by industrial dirt and corrosion which causes unwanted fault alarms that requires difficult and costly maintenance to correct. The Phoenix Triple IR flame detector completely eliminates these issues in applications where salt, dust, petroleum vapor, heavy rain, snow or blowing sand are present.
|
|
The design of this new generation of detectors provides 3 main features :
• Performances
• Guaranteed detection
• Easy installation, use and maintenance.
The efficiency of SIMTRONICS flame detectors offers :
• High sensitivity,
• Very short response time,
• Reliability,
• Immunity from interferences
It also guarantees protection against fire risks in industrial environments and enables the control of fire fighting.
The housings are treated specifically to resist corrosive factors (stainless steel or aluminium housings).
These TV63 detectors have a wide viewing angle (110°) and a range higher than 85 m.
The integrated relays and a 4-20mA output enable the control of the TV63 by the control units or by PLC.
The detectors are equipped with an automatic test control, which regularly checks the functionality of detection, as well as the optical and electronic integrity of the system.
The detector’s non-stop auto-tests & intrinsic quality feature SIL 2.
|
|
URR
The URR water nozzle produces a pressurized water spray which canbe continuously adjusted from a powerful straight jet, to a 160° round water curtain with a 11 meter (36 feet) diameter.
Please note the capacity changes in these two extreme operating conditions.
A strong rubber ring circles the diameter immediately behind the orifice, to avoid damages due to shocks.
URS
These lances make it possible to insantly switch among three different conditions, that is closed %u2013 straight jet %u2013 adjustable full cone spray.
The two larger size models can be supplied complete with an optional water curtain, to avoid the fire fighter beoing exposed to radiant heat from the open flame.
|
|
|
|
|
|
Total portable fire extinguishers
-Wet Chemical Portables (for cooking oil & fat fires)
There are always potential fire risks in kitchens, mass catering outlets and food production factories where flammable cooking oil and fats can flare up in an instant.
A most important key feature of this unit is the unique nozzle applicator which enables the user to apply the agent from 3 - 4 metres away from the fire, greatly reducing danger from the eruptive nature of burning oils and fats.
Primary uses would be in the catering industry, canteens, hotels, fast food outlets and industrial food production for local protection as well as households, laboratories, workshops, offices, shops, garages and industrial plants.
Key product features:
• Designed for universal use against A class fires and specifically for F class cooking oil and fat fires.
• Suitable against cooking oil and fat fires F class extinguisher according to newest version of EN3-7
• Safe for inadvertent use on electrical equipment (up to 1000v at 1m distance)
• Squeeze grip control valve allows total control of the discharge
• Pressure gauge for permanent pressure control
• A test valve is located behind the pressure gauge, ensuring a leak free seal and ease of maintenance
• Internal corrosion protected with 1mm PE coating
• Container with external thread for protection of anti-corrosive coating, even in threaded area
• High corrosion protection for entire unit, inside and out
• Swirl-effect, multi-spray nozzle for optimal droplet size and projection range
• Steel cylinder finished in high quality polyester powder coating, free of Cadmium and Triglycid Isocyanurate
|
|
KLS Fully autonomous detection and extinguishing system for mobile applications such as busses, trucks, trains, etc.
- Compact, all-in-one system
- OEM applications
- Easy to retrofit
- Low maintenance
|
|
|
|
|
|
Total portable fire extinguishers
-Standard Foam and Eco Range Portables
The latest standard foam fire fighting portables from TOTAL offer fast and effective knock down and are particularly suited to Class B fires based on petrochemical derivatives, oils and fats. They are also reliable and very safe, with no particulates or harmful residues. They have no effect on the earth’s ozone layer.
In the Eco Range portables, the foam is totally encapsulated in an internal cartridge and is only mixed when discharged. This has the benefit of considerably extending the life of the foam concentrate over that of standard premix foams, making servicing much easier and eliminating disposal concerns.
• Offices, schools, shops and flammable liquid storage are examples of typical applications.
• Swirl-effect, multi-spray nozzle for optimal droplet dimension and projection range
• Internal corrosion protected with 1mm PE coating
• Safe for inadvertent use with electrical equipment (up to 1000v, minimum distance 1m)
• Pressure gauge with permanent pressure control
• A test valve is located behind the pressure gauge, ensuring a leak free seal and ease of maintenance
• High corrosion protection for entire unit, inside and out
• The Foam concentrate is separated in special cartridges (S6 AKP model only). This gives the unit a very high level of environmental protection, makes it service friendly and maximises the life of the foam concentrate
• When the extinguisher is pressurised, the foam will be instantly ready mixed (S6 AKP model only)
|
|
FS2-P - FOAM FIRE EXTINGUISHER
FS2-P is a stored pressure spray foam fire extinguisher with aluminium body and pressure gauge. It is ergonomically designed, easy to use and can be optimally used in commercial and private areas. This extinguisher has passed the dielectric test at 35 kV. Certified to the Pressure Equipment Directive PED 97/23/EC, Marine Equipment Directive MED 96/98/EC and CEN EN3. Capacity is 2 l.
FS2-Y - FOAM FIRE EXTINGUISHER
FS2-Y is a stored pressure, spray foam fire extinguishers with aluminium body and pressure gauge. Certified to the Pressure Equipment Directive PED 97/23/EC, Marine Equipment Directive MED 96/98/EC and CEN EN3. Capacity 2l.
|
|
FS6-EV - FOAM FIRE EXTINGUISHER
FS6-EV is a stored pressure, spray foam fire extinguisher with aluminium body and pressure gauge. Certified to the Pressure Equipment Directive PED 97/23/EC, Marine Equipment Directive MED 96/98/EC and CEN EN3. Capacity is 6 l.
|
|
FS9-EV - FOAM FIRE EXTINGUISHER
FS9-EV is a stored pressure, spray foam AFFF fire extinguisher with aluminium body and pressure gauge. Certified according to the Pressure Equipment Directive PED 97/23/EC, Marine Equipment Directive MED 96/98/EC and CEN EN3. Capacity is 9 l.
|
|
CS2-A - CARBON DIOXIDE FIRE EXTINGUISHER
CS2-A is a carbon dioxide (CO2) fire extinguisher with lever valve. Certified according to the Pressure Equipment Directive PED 97/23/EC, Marine Equipment Directive MED 96/98/EC and CEN EN3. Capacity is 2 kg.
CS2-ML - CARBON DIOXIDE FIRE EXTINGUISHER
CS2-ML is a carbon dioxide (CO2) fire extinguisher with lever valve and front horn. Extended operating temperature range ?30 °C + 60 °C, therefore suitable for use in lowtemperature countries. Certified to the Pressure Equipment Directive PED 97/23/EC, Marine Equipment Directive MED 96/98/EC and CEN EN3. Capacity is 2 kg.
|
|
CS5-A - CARBON DIOXIDE FIRE EXTINGUISHER
CS5-A is a carbon dioxide (CO2) fire extinguisher with lever valve. Certified according to the Pressure Equipment Directive PED 97/23/EC, Marine Equipment Directive MED 96/98/EC and CEN EN3. Capacity is 5 kg.
CS5-ML - CARBON DIOXIDE FIRE EXTINGUISHER
CS5-ML is a carbon dioxide (CO2) fire extinguisher with lever valve. Extended operating temperature range - 30 °C + 60 °C, therefore suitable for use in lowtemperature countries. Certified to the Pressure Equipment Directive PED 97/23/EC, Marine Equipment Directive MED 96/98/EC and CEN EN3. Capacity is 5 kg.
|
|
|
|
|
|
Total portable fire extinguishers
-Standard Powder Portables (mixed risk class A, B and C fires)
TOTAL standard powder agent extinguishers offer the widest range of suitabilities as they can tackle A, B and C class fires, including flammable gas, making them the appropriate choice for areas of mixed fire risks.
These units are particularly suited to flammable liquid fires as well as flammable gas fires, such as methane, propane, hydrogen and natural gas. The 1kg and 2kg versions are available for cars, boats and home protection with a sturdy bracket for wall mounting.
Key product features:
• High fire rating enhances safety margins
• Safe for inadvertent use on electrical equipment (up to 1000v at 1m distance)
• Pressure gauge with permanent pressure control
• Squeeze grip control valve allows total control of the discharge
• PG1E / PG2E are specially designed for single handed use (for example, in the case of a car fire)
• A test valve is located behind the pressure gauge, ensuring a leak free seal and ease of maintenance
• Specialised production technology for powder extinguishant - high flow, moisture resistant
• Steel cylinder finished in high quality polyester powder coating, free of Cadmium and Triglycid Isocyanurate
• Rubber padded wall bracket protects coating (6 and 9 kg)
• Vehicle bracket included with sturdy fastening strap on request.
|
|
|
|
|
|
PS1-P ABC - ABC POWDER FIRE EXTINGUISHER
PS1-P ABC is a stored pressure, multi-purpose dry powder fire extinguisher with pressure gauge.It is ergonomically designed, easy to use and ideal for car and marine sectors.Wide operating temperature range –30°C + 60°C, ensures suitability for use in low-temperature countries. Certified to the Pressure Equipment Directive PED 97/23/EC, to the Marine Equipment Directive MED 96/98/EC and EN3. Capacity is 1 kg.
PS1-X ABC - ABC POWDER FIRE EXTINGUISHER
PS1-X ABC is a stored pressure, multi-purpose dry powder fire extinguisher with pressure gauge. Wide operating temperature range –30°C + 60°C, ensures suitability for use in low-temperature countries. Certified to the Pressure Equipment Directive PED 97/23/EC, to the Marine Equipment Directive MED 96/98/EC and EN3. Capacity is 1 kg.
PS1-XN ABC - ABC POWDER FIRE EXTINGUISHER
PS1-XN ABC is a stored pressure, multi-purpose dry powder fire extinguisher with pressure gauge. Wide operating temperature range –30°C + 60°C, ensures suitability for use in low-temperature countries. Certified to the Pressure Equipment Directive PED 97/23/EC, to the Marine Equipment Directive MED 96/98/EC and EN3. Capacity is 1 kg.
|
|
|
|
|
|
PS2-P ABC - ABC POWDER FIRE EXTINGUISHER
PS2-P ABC is a stored pressure dry powder fire extinguisher with pressure gauge and check valve. It is specially designed for car and marine use. Extended operating temperature range –30°C +60°C, therefore also suitable for use in low-temperature countries. Certified to the Pressure Equipment Directive PED 97/23/EC, Marine Equipment Directive MED 96/98/EC and CEN EN3. Capacity is 2 kg.
PS2-Y ABC - ABC POWDER FIRE EXTINGUISHER
PS2-Y ABC is a stored pressure dry powder fire extinguisher with pressure gauge and check valve. It is specially designed for car and marine use. Extended operating temperature range –30°C +60°C, therefore also suitable for use in low-temperature countries. Certified to the Pressure Equipment Directive PED 97/23/EC, Marine Equipment Directive MED 96/98/EC and CEN EN3. Capacity is 2 kg.
PS2-YN ABC - ABC POWDER FIRE EXTINGUISHER
PS2-YN ABC is a stored pressure dry powder fire extinguisher with check valve. It is specially designed for car and marine use. Extended operating temperature range –30°C +60°C, therefore also suitable for use in low-temperature countries. Certified to the Pressure Equipment Directive PED 97/23/EC, Marine Equipment Directive MED 96/98/EC and CEN EN3. Capacity is 2 kg.
|
|
PS9-F ABC - ABC POWDER FIRE EXTINGUISHER
PS9-F ABC is a stored pressure, dry powder fire extinguisher with pressure gauge. Extended operating temperature range -30°C +60°C, therefore also suitable for use in lowtemperature countries. Certified according to the Pressure Equipment Directive PED 97/23/EC, Marine Equipment Directive MED 96/98/EC and CEN EN3. Capacity is 9 kg.
PS9-FN ABC - ABC POWDER FIRE EXTINGUISHER
PS9-FN ABC is a stored pressure, dry powder fire extinguisher. Extended operating temperature range -30°C +60°C, therefore also suitable for use in low-temperature countries. Certified to the Pressure Equipment Directive PED 97/23/EC, Marine Equipment Directive MED 96/98/EC and CEN EN3. Capacity is 9 kg.
|
|
|
|
|
|
PS6-EV ABC - ABC POWDER FIRE EXTINGUISHER
PS6-EV ABC is a stored pressure, dry powder fire extinguisher with aluminium body and pressure gauge. Extended operating temperature range - 30 °C + 60 °C, therefore suitable for use in lowtemperature countries. Certified to the Pressure Equipment Directive PED 97/23/EC, to the Marine Equipment Directive MED 96/98/EC and CEN EN3. Capacity is 6 kg.
PS6-F ABC - ABC POWDER FIRE EXTINGUISHER
PS6-F ABC is a stored pressure, dry powder fire extinguisher with pressure gauge. Extended operating temperature range -30°C +60°C, therefore also suitable for use in lowtemperature countries. Certified according to the Pressure Equipment Directive PED 97/23/EC, Marine Equipment Directive MED 96/98/EC and CEN EN3. Capacity is 6 kg.
PS6-FN ABC - ABC POWDER FIRE EXTINGUISHER
PS6-FN ABC is a stored pressure, dry powder fire extinguisher. Extended operating temperature range -30°C +60°C, therefore also suitable for use in low-temperature countries. Certified to the Pressure Equipment Directive PED 97/23/EC, Marine Equipment Directive MED 96/98/EC and CEN EN3. Capacity is 6 kg.
PS9-EV ABC - ABC POWDER FIRE EXTINGUISHER
PS9-EV ABC is a stored pressure, dry powder fire extinguisher with aluminium body and pressure gauge. Extended operating temperature range - 30 °C + 60 °C, therefore suitable for use in lowtemperature countries. Certified to the Pressure Equipment Directive PED 97/23/EC, to the Marine Equipment Directive MED 96/98/EC and CEN EN3. Capacity is 6 kg.
|
|
Total portable fire extinguishers
-Special Risk Range Portables
Including:
• Powder portables for metal fires
• Powder portables for coal dust fires
• Tandem portables for automatic and portable operation
• Anti-magnetic Co2 portables for medical equipment environments
• Water portables for smouldering sawdust fires
• Wet chemical portables for cooking oil and fat fires
• Foam portables for polar liquid fires
|
|
|
|
|
|
Total portable fire extinguishers
-Standard Water Portables
Water is the traditional antidote to fire, but this well established principle is brought right up-to-date with optimal bead dimension, impressive projection and delivery cessation.
There are two versions:
• standard
• anti-freeze protected
Designed for universal use against A rated fires of solid matter, such as wood, paper, straw, coal and textiles. Typical applications would be farm storage, paper mills and processing, wood working and machining and fabric handling and upholstery facilities.
Key product features:
• High ratings rating enhances safety margins
• Safe for inadvertent use on electrical equipment (up to 1000v at 1m distance)
• Squeeze grip control valve allows total control of the discharge
• Internal corrosion protected with 1mm PE coating
• High corrosion protection for entire unit, inside and out
• 1-tip nozzle for optimal droplet size and projection range
• Steel cylinder finished in high quality polyester powder coating, free of Cadmium and Triglycid Isocyanurate
• Pressure gauge for permanent pressure control
• A test valve is located behind the pressure gauge, ensuring a leak free seal and ease of maintenance
• Rubber padded wall bracket protects coating
|
|
General Information
Attractively designed surface callpoint designed to operate on JSB FX2200 series panels (standard or Bi-wire). The callpoint has been designed for good looks and ease of installation, it includes features such as a fast fit self locking clip on front cover
Tamper proof feature
Stylish flush bezel available
Protective cover available
Resettable element available
Specification
Brand: JSB
Dimensions (mm): L87 x D57 x H87
Weight (KG): 0.1
ANA Number: 5018986194618
Cable Entry: Rear, top or bottom (rear is predrilled)
IP Rating: IP20
Vandal Resistant: Yes
|
|
This small rectangular fire damper can be installed in solid walls and ceilings and in lightweight partition walls.
The fire dampers are suitable for installation in walls and ceilings made of concrete or masonry and in lightweight partition walls. The damper installation is independent of the air flow direction.
The thermal release devices with the fusible links are removable from the outside and easy to revise.
All versions are additionally equipped with two more inspection ports.
square, rectangular
W: 200 – 800 mm
H: 100 – 200 mm
Fire resistance class:
K 90 acc. to DIN 4102
|
|
|
|
|
|
N
Fire Protection
Design Features
* Simplicity of design
* One-piece/no internal parts
* Clog-resistant
* Three standard pipe sizes—½", 1" and 1½"
* Male connection
* Factory Mutual, U.S. Coast Guard and Lloyd's Register approved models
Spray Characteristics
* Two spray cones—an outer, wide angle cone and a narrower inner cone—combine to give full cone effect
Spray pattern: Full Cone
Spray angles: 90° and 120° standard
Flow rates: 3.0 to 534 gpm (9.67 to 1720 L/min)
Fire Protection Approved
This BETE high-efficiency spiral was designed specifically with critical fire and explosion suppression applications in mind. These nozzles feature superior performance unequalled by traditional whirl nozzles.
Superior Performance Characteristics
* Sprays composed on droplets 30% to 50% smaller than conventional designs at equivalent pressures
* Extraordinarily large surface area of spray enhances evaporation and cooling
* Rugged, compact design
* Multiple concentric cone spray, unique to spiral pattern, maximizes contact
Superior Fire/Loss Prevention Applications
* Gas wellhead protection
* Safeguarding ship-borne cargo
* Storage tank protection
* Secondary explosion protection in explosive, dusty environments
* Mitigation of HF and other toxic gas releases
|
|
|
Tyco Fire & Integrated Solutions has unrivalled knowledge and experience in the application of sprinkler systems throughout every market sector in the world. From the moment we installed our first commercially available sprinkler system back in 1878, we have led the world in the constant development of new sprinklers and innovative “best practice” design, project management, installation and service & maintenance.
|
|
New from Tyco Fire Suppression & Building Products, Grinnell's G-Press(TM) Piping System is a complete piping system for a sprinkler fire protection installation, offering lower system costs, shorter installation times, reduced installation waste/clean up and is approved to international fire standards.
G-Press systems have been developed to meet the growing need for quicker, more precise sprinkler pipe installations together with the expectation of increased safety and security.
The range includes G-Press Fittings (using the G-Press Fitting Connection Method), the G-Press Passive Leak Monitoring (PLM) Sealing Ring and the G-Press Tube.
|
|
REF 23286 00
Very light (270 g for a pair size 10) and comfortable, this flexible glove is also machine washable. A GORE-TEX® membrane brings an ultimate barrier protection.
The ease of hand movement combined with a perfect fit ensures a high level of dexterity. As a result, time spent in hazardous area is reduced as the level of productivity and quality is increased.
|
|
|
|
Fire safety equipment
