|
|
| Products 151 to 180 of 207 |
Transponder handle FG4-T
Keypad with 2 optional pushbuttons and 2 LEDs. Button labelling as standard with F1 to F2 or on customers request. Integrated transponder reader in upper handle shank with a range of approx. 15 cm. Transponder in 3 different versions.
|
|
As certified by the German Trade Association for Precision and Electrical Engineering, the STS4 safety switch in conjunction with the STS4/B actuating element functions according to the identification principle with a six-digit safety code that is only issued once.
This non-contact system is extremely tamper-proof.
The switch complies with Control Category 4 as defined by EN954-1, with its response range it is insensitive to mechanical tolerances and is therefore suited for monitoring safety areas in semi-automated industrial plants that are separated by safety walls and doors.
Should the application require a re-alignment of the sensor (active surface), the switch can be quickly and easily modified on site.
|
|
|
|
|
|
The FPSC Fiessler Programmable Safety Center is a programmable electronic safety for personal protection, i.e. for safety functions. The FPSC complies with the highest safety requirements:
- SK1 through SK 4 according to EN 954-1
- SIL 1 through SIL 3 according to EN IEC 61508
- PL a through PL e according to prEN 13849-1
The product family FPSC provides maximum flexibility within its hardware and software structure. The FPSC - AD version offers the possibility to connect decentralized I/O modules via the implemented safety bus. This guarantees a modular system design that offers flexibility therefore reducing the costly and often elaborate configuration of the safe system bus.
The safety-related functions are programmable by using pre-assembled and tested software modules. The chaining
is made by simple assignment of input , i.e. output adresses. Intermediate data are stored in the temporary storage. There are various ready-to-use software modules at your disposal. For the communication with a superior control, i.e. for the operating sequence control or technology control, a serial interface is provided. The transfer of data for visualizing as well as the transfer of machine-relevant data can de realised via this interface.
The simple snap-on mechanism for fastening the items on the DIN rail in the switch cabinet considerably reduces the installation expenditure of the items of the product family.
|
|
|
Pluto Safety-PLC from Jokab Safety is a new ”All-masters” safety-PLC concept, which simplifies the design of safety-systems. The Pluto concept provides highest safety level according to category 4 EN 954-1. Pluto can provide an economic solution for both a single machine and big machine systems. The key difference with the Pluto-concept is that there is no Master-Slave relationship of the control units connected to the safety-bus. Every Pluto is a Master unit and it sees the other Pluto´s inputs and outputs and can use their information to make decisions about it´s own safety. This enables simple communication and simple alterations of the safety system. With our Gateway, the information from the Pluto safety-bus can be transfered to other bus-systems creating larger networks.
|
|
Complete machine control – Standard-compliant and safe
.. for complex and distributed plants with up to 8 064 inputs/outputs
On complex, distributed plants, PSS programmable control systems monitor safety-related functions and/or undertake complete control of the machine - whether centralised or decentralised via the safe, open bus system SafetyBUS p.
You put together your own individual solution and can rely on a system that's completely compatible :
- Modular control systems PSSmodular
- Compact control systems PSScompact
- PSSuniversal decentralised control platform
- Decentralised input/output units, PSSdio
- PSSnet network components for SafetyBUS p
- System software and programming guides
- Fast, safe communication via SafetyBUS p
|
|
Integron safety PLC systems are designed for low, medium and high risk applications, BS EN 954-1, Category 4 control equipment.
Typical applications might include, controlling two or three safety devices on a single machine through to multiple safety devices across several safety zones.
|
|
|
From 16mm to 30mm and in between, Rockwell Automation offers the broadest suite of products in the world. No matter what your push button needs are, Rockwell Automation can fill them. Allen-Bradley is well known for being a quality leader in push buttons, offering great flexibility, safety leadership, low cost of ownership, superior switching technologies, control network integration, fast delivery, and world-class support.
|
|
Guard Locking Tongue Switch - Type KLM
Designed to fit to hinged or sliding guards to provide high mechanical holding force and safety interlocking where it is required to protect the operator from moving machinery.
A unique internal mechanism design provides up to 4NC 2NO contacts and provides independent monitoring of the locking mechanism and the tongue position.
2 LED's provide Status of the Solenoid and Door Locked
Can be used with a Safety Relay to provide EN954-1 Cat.4 protection.
Rugged Die Cast housing - IP67 enclosure protection and optional Stainless Steel Head.
Provides Guard Holding up to 3000N (300Kg)
Spring to Lock - Solenoid operate to release
Conduit entry M20 or ½" NPT
Solenoid Voltages available: 24V. ac/dc 110V.ac 230V.ac
Flexible actuator available.
|
|
|
|
|
|
NEWS 2009
SAFETY HANDLES P-KUBE LINE
Thanks to the experience in the field of safety switches, Pizzato Elettrica introduces an innovative line of safety handles called P-KUBE.
This new line represents the answer to practical issues that the operators have with the application of safety switches on machinery guards, like the ease of installation, the precise mechanical movements of the guard, the occurrence of critical environmental conditions, the presence of inattentive staff.
Unlike other products on the market, the basic principle of this series provides that the operator can enter and exit the danger zone with simple and natural movements by avoiding the locks to bolt. Its special design and materials allow the safety handle to be used in heavy applications or with sturdy protections.
The safety handles P-KUBE line distinguishes itself by the following main features:
- Easy installation and easy functioning: to open or close the door there are only intuitive actions needed.
- Handle provided with a self-centering sturdy metal pin in order to have the alignment between the jamb and the door: this device works also as a door mechanical stop.
- Possibility to assemble it on swing and sliding doors.
- Possibility to adjust the handle on 3 different axis through slotted brackets.
- Optional Lock-out device with padlocks to avoid the unwanted or accidental closing of the protection by the insertion of the actuator in the switch.
- Compatible with switch FD series with separate actuator and switch FG series with solenoid.
|
|
AZM range solenoid interlocks, operating in combination with control elements of a machine, e.g. fail-safe standstill monitors or fail-safe delay timers, ensure that sliding, hinged and removable guarding devices, such as grids , hoods or doors, cannot be opened until hazardous conditions (e.g. running-down movements) have come to an end.
These solenoid interlocks are also used for cases in which the opening of a guarding device represents a non-permissible intrusion in a production process.
In combination with AES and AZR range safety monitoring modules, the AZM range solenoid interlocks achieve Control Category 3 or 4 to EN 954-1, subject to suitable circuit arrangements. Examples of circuits for solenoid interlocks are shown in the Schmersal Control Circuit and Applications Handbook.
Schmersal make both standard and AS-i Safety at Work solenoid interlocks.
Click here to see the AS-i models
Or for the standard models click below
|
|
RTK*E
* From 1 to 6 key slots
- Without contacts, this rotating lock is used to block circuit breakers, differential circuit breakers, accesses, ...
-Equipped with contacts permits blocking of command circuits (2O-2F) or power circuits (3O-1F up to 22KW)
- There are various versions available based on the application needs
Positive safety: Opening of the circuit by extraction related to the handling of the key.
Key logic:
%u2022 Without contacts, cam action
%u2022 1 Key: Held Key, 2 contacts
open, 2 contacts closed
%u2022 Various keys: Associative functioning ( )
%u2022 Various keys: Interchange functioning ( / ) (A keys free, B keys held)
|
|
|
|
|
|
Magsafe is Smartscan’s latest innovation in machine safety. An electro-magnetic interlocking system for controlling personnel access through the gates and doors set within the perimeter safety fencing or screens surrounding potentially hazardous machinery.
The key design element in Magsafe was to lock the door using magnetic force rather than by mechanical means and to remove the problems that plague existing gate locks due to liquid and dirt exposure in combination with the rigors of daily operation. This causes fatigue and leads to mechanical failure of the product. The ability to withstand harsh industrial environments such as water, dust and corrosive liquids Magsafe is the perfect solution for most guard locking applications.
In addition to this Smartscan has applied its safety light curtain technology background to the safety gate interlocking market by providing a system control unit which continuously monitors the on and off state of the magnets. This ensures the system detects when the gate is open and when it is closed. Only when the gate is closed and the magnetic locking force applied, will the control system allow machine operation.
|
|
Designed to control access to the dangerous or protected areas, this device is installed in any kind of door, gate, housing, and permits remote unlocking from a distance.
Equipped with a forced opening contact, it permits the detection when the access is closed again.
|
|
|
|
|
|
IDEM has launched The Kobra 'Hygiecam' KL3-SS , the world's first Solenoid Locking Tongue Interlock Switch in a fully Stainless Steel 316 housing. The switch has a mirror polished finish and is designed to cope with the rigorous high pressure hose cleaning demands of food and beverage manufacturing industries.
The KL3-SS is a compact, slimline locking switch designed to fit to all general applications.
The housings are IP69K rated and provide guard locking for medium to heavy duty guards (up to 3000N.).
The head is rotable to provide 8 actuator entry positions and all fittings including the actuators are made from Stainless Steel 316 to provide tough mechanical and environmental durability.
The switch is released by applying power to the solenoid after the machine is stopped.
A uniquely designed mechanism means that 2 sets of positively driven contacts are provided to monitor the actuator position and the solenoid status independently.
4NC Safety and 2NO auxiliary circuits are provided plus there are 2 LED's to provide independent diagnostics for the solenoid status and the actuator lock status.
|
|
The Hygiemag WMR Magnetic Non Contact Interlock Switches offer a wide industry robust fitting and provides environmental protection up to 105°C.
The housings are fully Stainless Steel 316 with mirror polished finish and they are designed to cope with the rigours of CIP and SIP cleaning in food processing industries. (IP69K High Pressure Chemical Cleaning).
In addition to the high specification enclosure the switch offers a wide 14mm sensing distance, a high tolerance to misalignment, provides up to 2NC 1NO power circuits (up to 2A.) and will connect to most popular Safety Monitoring relays to provide up to Cat. 4 EN 954-1.
Features:
Fully Stainless Steel 316 housings
Mirror polished finish
High Mechanical Life
IP69K enclosure protection - High Temperature Cleaning
Wide robust fitting - 30mm wide
M12 Flying Lead connector versions
|
|
Guardian Line Heavy Duty - Stainless Steel - Type GLHL/R-SS
The GLHL/R-SS is a robust Heavy Duty Safety Rope Pull switch designed to protect long conveyor lengths were protection is required up to 125m using two switches or up to 100m using a single switch. The Stainless Steel 316 housings are designed specifically to withstand the tough environments found in the Food and Pharmaceutical industries. They will survive chemical and detergent washdown by providing all stainless steel parts and robust IP67 sealing by using integral bellows and gaskets. They can be used to compliment the GLHD-SS versions at each end of the rope span
|
|
Idem Safety Switches have launched the first fully Stainless Steel 316 Universal Tongue Interlock switch to cope with the rigorous demands of the food, beverage and pharmaceutical environments.
The Kobra K-SS has a universally established industry footprint suitable for most general applications and is suitable were high humidity or chemical washdown is required e.g.Food and Beverage Processing and Petro-Chemical Industries. The housings are IP69K rated and are suitable for CIP cleaning and high pressure hosing.
Features:
Fully Stainless Steel 316 housing - double seal gasket
IP69K enclosure protection - High Temperature 100C. Hose Down
Universal fitting - established footprint suitable for most general applications
60 mm wide 100 mm long
4 pole contact blocks - (replaceable)
Head can be rotated to give 4 actuator entry positions
Standard or Flexible actuators
|
|
Stop Time Measuring Instrument for safety measurements at power driven machines such as presses, shears and robots. The system is used to calculate the distance of the safety device. (2-hand control, light curtain ..)
Portable and solid equipment, built-in matrix printer
Free adjustable stop point
Standstill detection down to v < 1 mm/s
Measurement of maximum velocity
Measurement of velocity at stop point
ISO9000 calibration certificate
Traceability of measurement values
RS-232 interface for PC connection
Fast set-up time
Actuator to release no-touch safety equipment as option
|
|
The Safety and Motion Analyser Tool (Smart) is designed to enable key Safety Critical machine parameters to be easily checked.
Smart has many valuable features for stopping time measurement:
- Graphical result - a "fingerprint of the movement"
- Calculates minimum allowed safety distance
- Easy to analyse stopping characteristics and movement
- Shows how the stop distance can be optimised
|
|
|
|
|
|
When actuated, tactile safety monitoring devices stop the hazardous movement. The diversity of applications requires constructively different devices.
The safety edges of the SL range are suitable for safeguarding crushing and shearing points, that can be present on guards, lifting tables and platforms, mobile storage shelving, operating process tables, storage lifts, lift doors, loading ramps, lifting and tilting devices or industrial gates. They immediately stop the dangerous movement, thus preventing injury or destruction.
The safety flaps of the SL 300 range are designed for the protection of man and machine at machines with wide material input or feed areas.
The safety mats of the SMS 3 range are used to protect surfaces in danger zones on machines and plants with dangerous movements. Depending on the shape of the area to be protected, multiple safety mats can be electrically connected. When the safety mat is actuated, a signal is evaluated and the machine stop is initiated.
In combination with a connected safety-monitoring module, the three above-described systems achieve control category 3 or 4 to EN 954-1.
|
|
Tongue - Interlock Safety Switch - Type IDIS-1
Positive opening safety contacts to IEC 947-5-1 Compact version - fits on 22mm hole centres EN 50047 body Head position adjustment to give 8 actuator entry positions High Mechanical Life 1,000,000 cycles Enclosure Protected to IP 66/67 - washdown suitable Conduit entries: M20 ½" NPT or Quick connect
Part No Type Contacts Fittings
190001 Angled Actuator 2NC 1NO M20
190002 Angled Actuator 2NC 1NO 1/2" NPT
190003 Angled Actuator 2NC 1NO QC
190004 Flat Actuator 2NC 1NO M20
190005 Flat Actuator 2NC 1NO 1/2" NPT
190006 Flat Actuator 2NC 1NO QC
190007 Plastic Flex Actuator 2NC 1NO M20
190008 Plastic Flex Actuator 2NC 1NO 1/2" NPT
190009 Plastic Flex Actuator 2NC 1NO QC
|
|
Suitable for all Braime sensors & other industry standard cylindrical sensors
Not affected by shaft or machine vibration
Easy to install, safe
Optional "Magcon" simplifies mounting
Heavy duty all stainless steel version available on request
|
|
|
Find an amelirate version about ours dustproof under speed monitor SENSOR JET which become GYROJET, more small and more power, the GYROJET possess an integrated inductive detector from 6 to 6000 pulses/min and a preset under speed level, with a quick fitting to shaft and an anti-rotative flexible strap, the GYROJET will permit you to have a totaly control for the speed of your elevator.
|
|
The Aprons Series AGS Mini AGS I AGS II (Hennig)
Stable and flexible in an obstruction narrow.
Anodic aluminum profiles.
Part of articulation preventing the large impurities and allowing a self-cleaning during the movements.
Resisting a high room temperature.
Corrosion resistant (anodic aluminum).
Great rigidity even for big lengths
Piétonnable: AGSI (up to 750 mm of range of support). AGS II (up to 2500 mm of range of support).
Interchangeable profiles.
Side guidance nonnecessary.
AGS I and AGS II are available with countersunk or projecting rivets (out of standard), on each side all the 2 Misters.
Ideal for the application with rolling up.
|
|
|
The ShockWatch EquipManager™ is a wireless fleet management system that ensures OSHA compliance, controls access, detects impacts, and monitors equipment operation to improve safety while reducing damage-related costs.
|
|
| ... products without technical information |
| |
|
|
Machine safety devices
