|
|
General Information
Intelligent analogue addressable optical smoke detector for use with JSB FX3302SS systems
approved to EN54 part 7.
Optical detectors are most responsive to large visible smoke particles and are best suited to slow burning or smouldering fires
Ideal for detecting smouldering fires
Easy to dismantle for on site cleaning
Dual LED'S for maximum viewability with minimum travel distance
Relay base available for local remote signalling
Specification
Brand: JSB
Dimensions (mm): Dia 103 x D33
Weight (KG): 0.1
ANA Number: 5021621236307
Cable Entry: Via separate base
IP Rating: IP20
Detector Type: Photo Electric
|
|
|
The QUESTemp® II personal heat stress indicator monitors an individual’s body temperature for indications of the onset of heat stress. It warns the user when their personal body temperature has risen above the "safe" level and that action should be taken to allow the body to cool.
|
|
INTERTEC sun shades made of GRP have been designed to provide protection from environmental conditions such as UV-radiation, precipitation and dust accumulation.
Different sizes are available to accommodate single and multiple instrument installations. INTERTEC has the right sun shade for nearly every application.
INTERTEC sun shades are available in the form of DIASHADE or SD in many different dimensions.
|
|
General Information
3 hour Maintained Exit SE .
Substantial Exit sign with large downlighter panel and excellent viewing distance. The legend is screen printed on the inside of the panel to prevent abrasion damage during cleaning etc. Please note legend needs to be ordered separately see related items at bottom of page
Large viewing distance
Robust construction
Internally screened legend
|
|
TYVEK WRISTBAND 25 MM
Description : Tear Proof wristbands Resist to water
Non toxic and hypoallergenic Numbered
25 cm long - 2.5 cm width
Color : Red, dark and light blue, yellow, pink, purple, dark and light green, orange, black, white, turkise, pale pink and silver
Option : Personalization
Packaging : Per box of 1000 pieces
Delivery time : Available on stock
|
|
Event-driven bracelet vinyl "L"
Features:
- Bracelets indéchirables and nontransferable
- Resistant to water
- Not poison and hypoallergenic
- Pressure plastic preventing the re-use
Dimensions:
Length: 257mm
Width: 19mm
Colors:
Chechmate: black, white, green clear or dark, maroon, light blue or dark, red, Bordeaux wine, money, gold, transparency
Options: Personalization and consecutive classification
Delivery period:
Virgins: of stock except sale
Printed: approximately 3 weeks (except breakdown service or significant amounts)
|
|
|
in 2- and 3 way version, DN 15-150, Flanges DIN/ISO drilled to PN16- and ANSI Cl 150, up to 180°C (360°F)
|
|
Description:
SIGHT GLASSES are instruments used to monitor the phases of the productive process in the chemical, pharmaceutical and alimentary industries.
|
|
Glass components include: Viewports (glass, pyrex, quartz), Add-a-doors, and Glass tube adapters
Accessories include: Up-to-air valves, Vacuum grease, Anti-seize compound, Protective flange caps, Wrenches
Viewports provide a simple method of adding an observation window to coating systems and other applications where a view of the internal chamber is required. A&N viewports are available in a variety of window materials (glass, pyrex, and fused quartz) and flange styles. Therefore, you will find an option for vacuum chambers operating high and ultra-high levels of vacuum.
Fixed viewports come in a variety of flange styles and window materials. The window is sealed with a transition material is known as KOVAR®. The ultimate pressure rating of these viewports is determined by the flange style. Note: Fixed viewports are not designed to withstand positive pressures.
Weldable viewports come in a variety of flange styles and window materials.
|
|
Nor-Cal's load lock chambers are provided with a six inch CF flange for mounting to the gate valve, a six inch Add-A-Door with 7056 glass viewport, a 2.75 inch CF flange for attachment of the linear feedthrough, and two 2.75 inch CF flanges for pumping. Standard finish is electropolished. Custom sizes can be supplied upon request.
SPECIFICATIONS:
- Construction:
Flanges: 304 stainless steel
Body: 304 stainless steel
Viewport: 7056 glass
O-ring: Viton
- Temperature range -20°C to 200°C
- Vacuum range >= 10^-8 Torr - High vacuum
|
|
The MLI sight glass is mainly used to indicate the condition of the refrigerant as well as the liquid level in the receiver or the oil level in the compressor.
MLI is equipped with a sensitive indicator that reflects a colour, depending on the moisture content in the refrigerant.
|
|
For visually monitoring the flow of fluids from the outside of the piping.
Operating Pressure Range: 0 - 13 barg
Operating Temperature Range: 0 - 200 °C
Benefits and Features
Easy to Use
Ball movement indicates flow status, which gives superior visibility.
Use of PTFE (fluorine resin) gasket results in superior maintainability.
Application Areas
Visual inspection of various types of equipment.
Operational Check of Steam Traps
Inspect the operating status of equipment by checking the flow of water, hot water, air, steam, etc.
|
|
Smoke detector (smoke sensing using optical light scatter principle) to prevent transfer of smoke via the ventilation ducting in air conditioning systems. Suitable for control and release of fire and smoke dampers with General Building Approval equipped with electric or electro-pneumatic release mechanisms and working on the principle of power off to close.
Essential features
- Granted General Building Approval Z-78.6-125 by the German Institute for Structural Engineering, Berlin
- Can be used for air velocities of 1 m/s to 20 m/s
- Independent of air flow direction
- With integral mains adapter (supply voltage 230 V, 50 / 60 Hz)
- With potential-free signal and alarm relays
- With integrated signal lamps
- With contamination level indicator and "tracking" of sensitivity threshold (long service life)
- Can be used regardless of product or manufacturer
- Annual maintenance
|
|
50 SD sensor of photoelectric smoke based on the Tyndall effect. The sensor is already complete of hoof for the logons. Led of memory 100 BUZZER but and, alarm escape to state of signalling alarm and anomaly. TEST alarm with magnet. In compliance with the Norms EN54, Min Certification. Int. Rome.
SD 50/12: as SD50 but with complete hoof of relè for operation with centers them to 12 V, it can be used in coupling to one centers them antitheft.
TECHNICAL CHARACTERISTICS
Feeding: from 9 to 24 Vcc.
Absorption: 43 µA in quiet and 38 but in alarm.
Accessories: A46 ring spacer for hoof detector.
|
|
ALG-V, Photoelectric Smoke Sensor
STANDARD FEATURES
Built-in optical fire test feature
Uses the noise immune Digital Communication Protocol (DCP), which utilizes interrupts for fast response to fires
Automatic compensation for sensor contamination
Simple and reliable device addressing method
Flat Response Photoelectric Chamber
Low Profile - Only 1.97" high, including base
|
|
|
|
|
|
Spark Detector FM 1/8
All three sensor types have high-sensitive electronics which detect even the smallest of glowing particles. The detector FM 1/8 features reliable function even in very dense material flow or when the optical element is covered by a dust layer. It can be used at material temperatures up to 60 °C which corresponds to a temperature range of extraction systems for woodworking machines, like for example saws, planes, sanding machines etc.
Spark Detector FM 3/8
The detector FM 3/8 is used for operating temperatures up to 360 °C as they can appear for drying processes for example. Spark radiation is led through fibre optic cables to the detctor itself.
Daylight Spark Detector DLD 1/8
For a reliable detection of glowing or hot particles it has to be assured that no ambient light is present at the inspection place. Where an absolute dark surrounding cannot be guaranteed sensors which aren't sensitive to daylight or other ambient light are used. These sensors only operate in the spectrum of infrared light so they can be installed even at open transfer points or on conveyor belts.
|
|
|
|
|
|
Spark extinguishing systems are in a position to detect even the smallest of sparks or hot particles in extraction ducts, drop chutes or mechanical conveyors, like for example screws or elevators, and to start countermeasures instantaneously. These can either be: activation of an exinguishing system, shutting off the way of transport or interrupting the production. All these measures are taken within a split second.
Detection of the ignition sources is made by means of spark sensors recognizing the infrared radiation of sparks and glowing particles. These sensitive spark sensors are even capable of detecting sparks through layers of dust or through the conveyed, dense material flow. They give alarm signals to the control console which processes the signals and releases automatically well-aimed countermeasures. Mostly an extinguishing device is triggered which is installed downstream from the spark detectors.
This device releases a water mist spray in the duct section into which the sparks are transported. Once no spark stream is detected, the extinguishment spray is automatically stopped. While the extinguishment takes place, the production process can be continued unless otherwise desired. Due to this special operation principle, spark extinguishing systems have to be classified differently than for example sprinkler systems, deluge systems, or even explosion suppression systems.
These fire protection measures are required for the protection of buildings and facilities which cannot be dropped even when a spark extinguishing system is installed.
|
|
|
The quarter wave stub devices feature best in class performance specifications, including bi-directional protection, low VSWR, normal and reverse polarity, high RF power and ultra low let through(5V). Using robust materials in construction the maintenance free quarter wave serier is ruggedized, weatherproof to IP68 standard.
|
|
|
|
|
|
Even small overvoltages can disable sensitive electronic equipment, computer networks and computer-controlled production systems in fractions of a second. For protection against overvoltages which can result from lightning or switching processes in electrical supply networks, OBO offers a wide range of surge and lightning arresters for the German and international markets. These include not only devices to protect AC networks of various voltage levels, but also special systems for data lines and telecommunication devices, and protective modules for process measurement and control systems.
With the new LightningControllern, OBO presents innovative lightning protection systems with patented multi-carbon technology in the new VBS catalogue. The first modular spark gap for perfect integration into distribution systems. The great advantage of the new units is that they have a fully encapsulated housing. This means no more arcing! This eliminates the risk of fires in the distribution box due to sparking.
The OBO range of systems for external and internal lightning protection is also complete. All components have passed the tests imposed by the Lightning Protection and EMC Technology Centre in Menden and have the corresponding test marks and certificates.
|
|
* Coordinated spark-gap-based lightning current arrester, consisting of a base part and plug-in protection module
* Maximum system availability due to RADAX Flow follow current limitation
* No tripping of 32 A gL/gG fuses up to short-circuit currents of 50 kArms
* Discharge capacity up to 50 kA (10/350 µs)
* Directly coordinated with DEHNguard surge protective devices without additional cable length
* Low voltage protection level
* Operating state/fault indication by mark in the inspection window
* Allows for easy replacement of protection modules due to module locking system with releasing button
|
|
|
2-D Cell traffic wand w/ colored filters/waterproof
|
|
With the trailer disconnected, a mobile support winch will contribute to a safe loading/unloading process. If a trailer is entered with a forklift while docked at a loading bay, it can tip like a see-saw across its support stands.
Furthermore, the support stands can be damaged by brake and acceleration maneuvers. Simply place the mobile support winch to avoid these situations. haacon offers such winches with two gears and 350 mm stroke. Thus, the winch can be adjusted to different heights. This robust support winch can lift loads of up to 15 tons. It is covered by a damping rubber cover and its head can be tilted by 3 degrees in all directions and can be swivelled horizontally by 8 degrees. The large all-rubber tires will let you maneuver this wince easily and ergonomically correct, even if the ground is uneven.
|
|
Skip covering nets in standard sizes
Skip covering nets in any size (per m²)
|
|
|
|
|
|
- Complete Security Detection
- Highly Visible Double Display provides Single or Multiple Location of Weapons in Transit
- Very High Speed of Detection
- High Immunity to External Interferences
- Direct Selection of the International Security Standards
- High Reliability
- Local or Remote Programming with Networking Capabilities
The HI-PE Multi Zone is a high performance walk-through Metal Detector which exceeds all International Security Standards.
A “height on person” display actually indicates, by means of illuminated LED’s, the position of the weapon on the person. Three operating modes are available: Floating (standard): the location zones are not fixed, as in the case of Metal Detectors with multiple receiver-transmitter coils, but are variable and continuous so as to achieve optimum resolution; 8-Zones and 4-Zones: the alarm threshold can be adjusted individually for each zone. The panels are washable and they are equipped with shock absorbent edges to protect them against damages.
HI-PE Multi Zone can be supplied, on request, with two emergency batteries that automatically come into operation in the event of a mains failure. A photocell transit counter is available as an option. This will allow for statistical data to be accumulated on the persons passing through the detector.
The detector’s control unit is incorporated into the structure. Access to programming is protected both by a mechanical lock and by two alphanumeric passwords.
|
|
|
|
|
|
CEPRO® offers an extensive product package to provide shielding against sparks and welding spatters. The choice depends on the type of risk, the frequency of use, the proximity of the spark source and the different environmental factors. Products can be supplied for horizontal applications (welding blankets) or vertical solutions (curtains). In a great many cases it is also necessary and possible to supply custom made products.
CEPRO®-CLEAR see-through curtains and strip curtains are resistant to all grinding sparks flying around and also offer a view of the work area. All CEPRO®-CLEAR products are M-2 flame extinguishing. They offer an excellent protection to nearby co-workers who can work without any risk of burns or damage to products.
CEPRO® heat resistant screens and curtains of fibreglass or silicate fibres offer a high degree of protection against welding spatters and important showers of sparks. To shield costly materials CEPRO® supplies welding fabrics and blankets with different cooling times which can resist temperatures of 550°C to 1200°C. They can be supplied with different types of coatings for increased mechanical load-bearing capacity, higher peak temperatures, prolonged heat contact etc.
|
|
| ... products without technical information |
| |
|
|
Other safety and signaling equipment
