- Hydraulics - Pneumatics >
- Pipe, Tube and Fitting >
- Socket fitting
Socket fittings
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Diameter: 0.06 in
Minimatic barb fittings from Clippard are corrosion resistant due to nickel plating which makes them perfect to be used in applications involving high amounts of moisture. These fittings can substitute ...
Diameter: 9 mm - 76 mm
Our hose ends are traditional barbed nickel-plated and brass fittings. They are suited for connecting smooth or reinforced flexible hoses with an internal diameter up to 76 mm.
Rotating quick coupling fittings Quick coupling fittings are composed of a jack with hose end connector and a threaded male coupler which connects itself to the jack. They are fixed by a ball ring pushed ...
Diameter: 16 mm - 100 mm
Operating pressure: -0.98 bar - 16 bar
... configurations : straight fittings, elbows, T-fittings, tapping flange, valves... New range of PPS1 100% aluminium fittings: the most comprehensive on the market. Technology PPS ...
Prevost
Diameter: 16 mm - 100 mm
Operating pressure: -0.98 bar - 16 bar
PREVOST PIPING SYSTEM, The 100% aluminium fittings : PREVOST designs and manufactures its new PPS1 100% aluminium fittings to ensure that they are the most compact and effective on the market. The ...
Prevost
Diameter: 6, 10 mm
Operating pressure: 1.5, 12.5 bar
It is ensured that the pipes and blowtorches are securely connected an disconnected properly by the Isoflam welding safety couplings. They also protect the operator from the hazards associated with the use of gas. Gas and blow back is ...
Prevost
... designed for use in Beswick elbow and tee fittings reduces installed height and simplifies installation. This new stud option is provided with a recessed 7/16 inch hex and can be easily tightened with a hex key Allen ...
Beswick Engineering Co, Inc.
Diameter: 0.8 mm - 6.4 mm
Operating pressure: 0 psi - 100 psi
Straight 10-32 external threaded barb fitting. Max Pressure Rating: 100 psig, when used with appropriately sized polyurethane tubing. With a clamp installed, the limiting factor generally becomes the burst pressure ...
Beswick Engineering Co, Inc.
Diameter: 1.6, 4.5, 3.2 mm
Operating pressure: 0 psi - 100 psi
Straight 10-32 internal threaded barb fitting. Max Pressure Rating: 100 psig, when used with appropriately sized polyurethane tubing. With a clamp installed, the limiting factor generally becomes the burst pressure ...
Beswick Engineering Co, Inc.
Diameter: 10 mm - 20 mm
Barbed fittings used to connect the vacuum source to the vacuum tube to guarantee a rigid connection. Material: brass Models : . RVM: Straight Fitting (Male) . RVF: Straight Fitting ...
Diameter: 0.125, 0.09, 0.06, 0.17 in
Operating pressure: 0 psi - 125 psi
Swivel fittings connect tubing to a threaded hole. The barb (and tubing) can be freely rotated from the base. An integrated sealing bead provides a convenient and cost effective seal against the mating part. Barbed connections ...
AIR Logic
Diameter: 0.125, 0.09, 0.06 in
Operating pressure: 0 psi - 125 psi
Swivel fittings connect tubing to a threaded hole. The barb (and tubing) can be freely rotated from the base. An integrated sealing bead provides a convenient and cost effective seal against the mating part. Barbed connections ...
AIR Logic
Diameter: 0.062, 0.09, 0.125 in
Operating pressure: 0 psi - 125 psi
Swivel fittings connect tubing to a threaded hole. The barb (and tubing) can be freely rotated from the base. An integrated sealing bead provides a convenient and cost effective seal against the mating part. Barbed connections ...
AIR Logic
Diameter: 0.13 in - 2 in
Operating pressure: 15 bar - 75 bar
The SP Cupla Type A is recommended for processes involving air, water, hydraulic oil, and chemicals. It yields a maximum working pressure of 15 to 75 bar. The housing materials of this coupling consist of steel, stainless steel, and brass. ...
Nitto Kohki Europe
Diameter: 14 mm
Operating pressure: 7 bar
These quick-connect couplings are very easy to connect. The plug fits into the socket with just a simple push of the hand. They are lightweight and compact in size. Their bodies are structured from chrome-plated brass ...
Nitto Kohki Europe
Diameter: 17.5 mm
Operating pressure: 10 bar
The Compact Cupla is designed with a solid 17.5 mm external diameter. Its plug and socket have an inherent valve that automatically shuts off. The body is made of brass or stainless steel to provide resistance against ...
Nitto Kohki Europe
Operating pressure: 1,000 psi
• All fitting threads meet standards from DrySeal American Standard Taper Pipe Thread (NPTF) • Made from CA 360 and CA 345 brass • Top quality finish • Meet functional requirements of SAE J512, American Society of ...
Diameter: 2, 6, 3, 4 mm
Operating pressure: -0.99 bar - 10 bar
STRAIGHT HOSE ADAPTOR Nickel-plated brass threaded adaptors is the argest range of Aignep. Countless configurations in multiple sizes: nipples, reductions, plugs, T, L, hose adaptors. High performances in pressure and temperatures ...
AIGNEP
Diameter: 4, 2, 6, 3 mm
Operating pressure: -0.99 bar - 10 bar
TEE HOSE ADAPTOR Nickel-plated brass threaded adaptors is the argest range of Aignep. Countless configurations in multiple sizes: nipples, reductions, plugs, T, L, hose adaptors. High performances in pressure and temperatures (+300°C). Sharp ...
AIGNEP
Diameter: 24 mm
Operating pressure: 0 bar - 16 bar
COMPRESSION SOCKET WITH SPRING Maximum static pressure (no pulsations) 35 bar Temperatures - 20 °C + 80 °C
AIGNEP
Diameter: 14 mm - 66 mm
Operating pressure: 10 bar
Connections - hoze nozzle – male thread Approvals - EURASEC Hygienic Certificate, GOST Certificate, Rostehnadzor Permission
Praher Plastics Austria GmbH
Diameter: 10 mm - 63 mm
Operating pressure: 16 bar
Connections - solvent spigot – hose nozzle Approvals - EURASEC Hygienic Certificate, GOST Certificate, Rostehnadzor Permission
Praher Plastics Austria GmbH
Diameter: 0.375 in - 2 in
Operating pressure: 16 bar
Pressure rates - PN16 Connections - solvent socket – female thread Certificates - EURASEC Hygienic Certificate, GOST Certificate, Rostehnadzor Permission
Praher Plastics Austria GmbH
Diameter: 50 mm - 300 mm
Description, addition to product name - Hose reducer for extending, connecting and joining light to medium weight hoses Construction / Material Hose reduction design - made of metal Material of hose reduction - Sheet steel, galvanised Properties Chemical ...
Diameter: 16 mm - 110 mm
Operating pressure: 16, 10 bar
... of fittings designed for conveying fluids under pressure with a hot weld connection system (socket welding). PVDF Series of fittings designed for conveying fluids under pressure with ...
Diameter: 20 mm - 63 mm
Operating pressure: 10, 16 bar
Series of fittings designed for conveying fluids under pressure with a hot thread and weld connection system (socket welding). PP-H FITTINGS MAIN PROPERTIES and CHARACTERISTICS: – ...
Diameter: 13 mm - 76 mm
Operating pressure: 4.9 bar - 16.1 bar
... 650V Plastic). Traceability Silicone label QR Marking Special marking Assemblies 316L Stainless steel SZR crimp fittings Molded clamps Features Outer Layer VMQ Silicone, smooth and translucent. Reinforcement Polyester ...
Diameter: 10 mm - 54.5 mm
Connectors FLEXAquick for ROHRflex corrugated plastic tubings Plastic connector, quick-type, straight, plug-type connection, conically sealed Material PA plastics Temperature -40°C ... +120°C Protection class [acc. to EN 60529]: IP 66
Diameter: 3 mm - 6 mm
Operating pressure: -0.1 MPa - 0.5 MPa
Barb joint best suitable for space-saving piping. They are optimal for piping vacuum equipment. (Use with vacuum tube.) As for compression type, tube can be tightening by hands. Clean-room Package, best suitable for compact piping ...
Diameter: 3, 6, 4 mm
Operating pressure: -0.1 MPa - 1 MPa
This ultra small barb fitting is best suitable for requiring corrosive resistance or use in chemical atmosphere where space-saving piping is required. Compared to Minimal Fitting, the size is max. ...
Our EQOair range is the solution for your compressed air networks. All components, pipes and fittings, are 100% aluminum, enabling you to supply your workshops with optimized performance and energy savings. Lightweight ...
Diameter: 6, 14, 12, 8 mm
Operating pressure: 16 bar
... – Modular, flexible structure – Hexagon socket for easy assembly Operating temperature : -20°C bis +70°C -20°C bis +80°C For fittings with PVC seal For fittings ...
Diameter: 0.125 in - 1 in
Operating pressure: 0 bar - 60 bar
Standard fittings Type 100 – Brass fittings – High resilience – Nickel-plating for corrosion protection Operating temperature max. +150°C Dependent on the temperature range of the tube/pipe ...
Diameter: 0.125, 0.25 in
Operating pressure: 0 bar - 60 bar
Standard fittings Type 100 – Brass fittings – High resilience – Nickel-plating for corrosion protection Operating temperature max. +150°C Dependent on the temperature range of the tube/pipe ...
Diameter: 3 mm - 15 mm
The Plastic Y Barbed Coupling, manufactured by Burkle, is ideal for applications such as pharmaceuticals, laboratory, industrial or manufacturing, water sampling and food processing. This provides a leak free and flow control fluid handling ...
Bürkle
Diameter: 3 mm - 15 mm
The hose tubing connector is characterized by its cylindrical straight structure. It fits various hose sizes and has two versions. The Polypropylene type resists working temperatures of up to +135°C while the Polyvinylidene fluoride type ...
Bürkle
Diameter: 4 mm - 17 mm
The Burkle universal hose tubing connectors for diameters from 4 to 17 mm feature conical nozzles and can be made out of PP or PVDF. The PP type has heat resistance up to 135 °C, while the PVDF type has heat resistance up to 160 °C and ...
Bürkle
Diameter: 3 mm - 14 mm
Operating pressure: 0.5 bar - 12 bar
Series of push-in fittings with reduced dimensions and new collet and release collar. They are for connecting nylon and polyurethane tubes. Available in various configurations (studs, elbows, T, Y) and with threads Gas ...
Operating pressure: 100 psi
Barbed fittings with Orifice Insert These barbed fittings feature an integral precision orifice. SPECIFICATIONS ACCURACY: See “Precision Orifices” MATERIAL: FDA Approved Polysulfone/Polycarbonate MAX. ...
Operating pressure: 100 psi
Barbed fittings with Orifice Insert Barbed fittings with Orifice Insert These barbed fittings feature an integral precision orifice. Specifications ACCURACY: See “Precision Orifices” MATERIAL: ...
Diameter: 6 mm
... with barbed fitting for flexible tube -Barbed fitting: DN 6 -Corrosion-resistant -High level of gas tightness -Material of sample-contacting parts: PP hose nozzles, G-ISO thread, material: PP Hose ...
M&C TechGroup Germany GmbH
Diameter: 8 mm
... barbed fitting for flexible tube Thread size: G 1/8" Barbed fitting Corrosion-resistant High level of gas tightness Material of sample-contacting parts: PP hose nozzles, G-ISO thread, material: PP Hose ...
M&C TechGroup Germany GmbH
Diameter: 4 mm
... with barbed fitting for flexible tube -Thread size: G 1/4" -Corrosion-resistant -High level gas tightness -Material of sample-contacting parts: PP hose nozzles, G-ISO thread, material: PP Hose and tube screw connectors ...
M&C TechGroup Germany GmbH
Operating pressure: 0 bar - 16 bar
... offering. Also known as the “Accessory” line or “Standard Fittings” line, the RT Line consists of a wide variety of components such as: nipples, L-T fittings, hose, reductions and more. All RT fittings ...
Operating pressure: 0 bar - 15 bar
1 > Body: Brass UNI EN 12164 CW614N Nickel plated 2 > Balls: Stainless Steel AISI 420 3 > Seals: NBR 4 > Springs: Stainless Steel AISI 302
Diameter: 11 mm
Operating pressure: 40 bar
Eliminates premature wear of the supply hose. Reduces muscle strain caused by the rigidity of the flexible, easy washing in places with difficult access. Durable, thanks to mechanical stainless steel components and Aluminium ...
Diameter: 25 mm - 65 mm
Operating pressure: 25, 40 bar
Passage of water, hydrocarbons, food liquids, in pressure or in vacum, very numerous uses for joins DynaVariacor® which return flexible and dirigible any types of flexible or rigid pipes. Less effort due to hose rigidity, make easier ...
Diameter: 4 mm - 25 mm
Operating pressure: 250, 300, 225 bar
Application area General application, e.g. in industry, construction machinery, agricultural technology etc. Connection 1 metric cylindrical outer thread Sealing form 1 24° inner cone Standard ISO 7241 series ...
Diameter: 10, 19 mm
Operating pressure: 250 bar
Application area General application, e.g. in industry, construction machinery, agricultural technology etc. Connection 1 NPT internal thread Sealing form 1 thread seal compatible with Faster Additional ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining