- Hydraulics - Pneumatics >
- Pipe, Tube and Fitting >
- Pipe and hose accessories
Pipe and hose accessories
Hose diameter: 80 mm - 600 mm
Width: 7.8 mm - 130 mm
ACCESSORIES FOR FLEXIBLE DUCTS HOSE CLAMPS in flame retardant polyamide HOSE CLAMPS in steel with balancing head SPIRAL HOSE CLAMPS in steel with balancing head JOINT COUPLING FLANGED COUPLING
Various sizes and designs (see details) • KT1, Clamping opening 25mm, M6 Thread, Steel (Art.# 5.140) • KT1, Clamping opening 25mm, M6 Thread, Aluminium (Art.# 5.142) • KT2, Clamping opening50mm, ...
Hose diameter: 6.6 mm - 85 mm
"Quick and easy mounting by using a usual pincer. High clamping effectiveness, easy to dismount. Reusable! Pressure resistance: 10 bar"
Model ALF, L-Style Water Hammer Arrestor, also known as Pulsation Dampener, are used to absorb the shock when water flowing in a piping system suddenly stops due to fast closing shutoff valves. This device protects against annoying and ...
Model AIT / AIF, I-Style Water hammer arrester, also known as Pulsation Dampener, are used to absorb the shock when water flowing in a piping system suddenly stops due to fast closing shutoff valves, dishwashers, and clothes washers. ...
Modle AXT, a Water hammer arrestor for household application are used to absorb the shock when water flowing in a piping system suddenly stops due to fast closing shutoff valves, dishwashers, and clothes washers. This action protects ...
Diameter: 40 mm - 110 mm
Operating pressure: 16 bar
Unidelta compression fittings and clamp saddles are designed specifically for connecting polyethylene pipes with an outside diameter from 16 to 110 mm (200 mm for clamp saddles). They are fully compatible with all PELD, PEHD, PE40, PE80 ...
Armendus ARM080.825 is an 080/Ø48 Adaptor produced in accordance with operator systems and industrial machines belonging to different sectors, it is designed to fit all profile models. With its waterproof module, you can connect tube ...
ARMENDUS
The flexible structure of ARM080.835 is among the technical support elements produced for industrial panels to provide maximum performance in a compact form. This module is provided with a bellows that can move up and down. There are ...
ARMENDUS
ARM080.826 Ø48 adaptor has an ergonomic structure used to connect the operating panels to the mechanical system. You can adjust the rotation angle at the desired position with the switch lever located on the side surface of the module. Weight 930gr. Color RAL7035 Material Aluminum Movement 350 ...
ARMENDUS
Diameter: 20 mm - 70 mm
Length: 70 mm - 228 mm
Series of standard adapters in AISI 303 Stainless Steel for actuator/valve connection. Squares according to ISO 5211-DIN3337-NAMUR. On request customized adapters.
Series of Carbon Steel and Stainless Steel Reductions for assembling the actuators in top of the valve.
Ex-reduction from threaded or clearence holes to smaller thread sizes. Suitable for applications in hazardous areas. Features: - Group (Zone) II 2 G (1, 2) II 2 D (21, 22) - Marking Ex eb IIC Gb Ex tb IIIC Db - Temperature range ...
Jacob GmbH
Enlarger made of nickel-plated brass for the enlargement of threaded or clearance holes to larger thread sizes. Features: - Temperature range -60 °C / + 200 °C - Protection grade dependent on the combination with other components
Jacob GmbH
Ex-enlarger from threaded or clearence holes to larger thread sizes. Suitable for applications in hazardous areas. Features: - Group (Zone) II 2 G (1, 2) II 2 D (21, 22) - Marking Ex eb IIC Gb Ex tb IIIC Db - Temperature range -40 ...
Jacob GmbH
Diameter: 75 mm - 630 mm
Length: 105 mm - 430 mm
Reinert-Ritz offers reducers as a fully pressure-class-compatible solution with pipe diameters of up to 2,000 mm. These are available in both concentric and eccentric versions. In addition to a version for butt welding, a variant with ...
Reinert-Ritz GmbH
The light and absolutely corrosion-resistant dismantling joint QUICK-TWIST is tailored exactly to your needs. The well-designed Reinert-Ritz HP flange is used for maximum reliability on the loose side. On the fixed side, QUICK-TWIST is ...
Reinert-Ritz GmbH
Diameter: 80 mm - 135 mm
Operating pressure: 10, 16, 25 bar
For connecting hydrants in pipe intersections, an X‑cross for hydrants can be used. The hydrant connection can be selected flexibly among flange, BAIO® and spigot connections. Moreover, all variants are available alternatively with REINOGRIP ...
Reinert-Ritz GmbH
Di Nicola manufactures Three flanges dismantling joints in ductil iron EN GJS 400, in EN GJS 500 , EN S275J0 in construction steel and stainless steel AISI 304 , 316 , Duplex and Super Duplex , with sizes ranging from 100 to 2800 mm and ...
Stainless Steel repair clamp for repairsand connection on pipeline of different materials for acqueduct, irrigation, alimentary and industrial use. Characteristics Designed for the delivery of potable water, liquids in general methane, ...
Precision Orifices Precision Orifices – Plain U.S. PATENT NO. 5,354,530 Precision molded orifices feature accuracy comparable to jewel orifices at a fraction of the cost. Color coded for easy identification. SPECIFICATIONS ACCURACY: ...
Precision Orifices with Barbs Feature integral filter to prevent clogging. Barbed connections allow higher working pressures. Color coded and clearly marked with size and flow directions.
Vent Screws / Bleeding Screw Operating Pressure: max. 400 bar Versions: G1/4 and G1/8 - Visually identical to screw plugs - Less damage possible by external influences - No lock nut is required - Space saving mountung - Suitable for ...
Pressure: 20 bar - 4,000 bar
Flow rate: 0 l/min - 8 l/min
- All high pressure valves integrated - Oscillating, continous flow - Different flow rates available - High pressures reachable - Special solutions / further models on request - Low weight The pressure intensifiers convert a low hydraulic ...
Connection type screw connection to housing Thread Construction type External thread Degree of protection (IP) conduit dependant 67.00 Material housing Brass Surface protection Nickel-plated
Teaflex S.p.a
Supply pressure: 3.5, 17 bar
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow ...
ControlAir
Supply pressure: 200 psi
The Conoflow GH22/42 Series Flow Boosting Relay is used to boost, amplify or reduce the pneumatic signal of a controller or similar instrument in a predetermined ratio. Using an independent supply pressure for greater flow volume, the ...
HoseGuard® - Portection of personnel, machinery and equipment against hose whipping. The This protection unit is a cost effective way to ensure compliance with several guidelines for the effects of a broken hose. The HoseGuard® will instantly ...
Diameter: 0.38, 0.25, 1, 0.75 in
Length: 28.4 mm - 76.2 mm
FEATURES - 90° adaptor for positioning of nozzles. - Available with thread sizes 1/8”-1” BSPT Male and BSPP Female. - Available in Brass and Stainless Steel. - Other materials available to special order.
The steel piping system with fittings consists of many different diameters. With its special aerodynamic design for industrial central vacuum systems, it ensures minimum pressure drop through the whole system. All our piping system ...
Diameter: 80 mm - 1,200 mm
Kolk flanged fittings are made of ductile iron GJS-400/500 (DIN1693 GGG-40/50). Designed acc. to EN 545, flange drilling acc. to EN 1092-2 (ISO 7005-2). Epoxy coated (Resicoat®) acc. to EN 14901 (DIN 30677-2) and GSK certified (RAL-GZ 662).
Kolk dismantling joints are made of steel, flange drilling acc. to EN 1092-2 (ISO 7005-2). Epoxy coated (Resicoat®) acc. to EN 14901 (DIN 30677-2) and GSK certified (RAL-GZ 662). When ordering specify material quality for tie rods (A2/A4, ...
Diameter: 6 mm - 18 mm
Operating pressure: 0 bar - 16 bar
The MT is the new push-in fittings line that has been developed and designed to ensure high reliability and safety in the pneumatic braking systems on commercial and industrial vehicles. The push-in fittings of the MT Line are completely ...
The CAMSTOPPER® "CAM" stopper is a very clever device! Equipped with a patented, innovative cam handle system, which locks the stopper into position with one motion, CAMSTOPPER® is undoubtedly the easiest and quickest stopper to fit ...
The PRO Campstopper plug is a bigger model than the CAM model. It uses the same patented, innovative system for plugging pipes featuring a locking handle, but is more suitable for bigger pipes with nominal bores ranging from 175-mm to ...
The Pro SPC is integrated with a handle actuated camlocking system. The unit provides a smooth installation, and removal. Also, it is withdrawn using a cord, which is fixed to the handle. The device is designed from HDPE, WC, and ...
Diameter: 40 mm - 1,600 mm
Made of ductile cast iron – according to EN 545. Our wide range of flange fittings for almost every application includes single flange fittings F, double flange fittings FF, double flange bends FFK 11–45° and Q, flanged duckfoot bends ...
Diameter: 1 mm - 30 mm
Temperature: -20 °C - 105 °C
Standards • Compliant with directive RoHS 2011/65/EU • NFEN 60684-1 (10-2003) • Compliant with SHVC (list published by the ECHA) • CEIEN 60684-3 sheets 100 to 105 (12/2003) • Option: UL 224 - Oil Resistant - VW-1 (PVC105°) File E345725 • ...
Diameter: 1 mm - 60 mm
Temperature: -50 °C - 200 °C
Characteristics • Continuous working temperature: from -50°C to +200°C • Tearing resistance: 18 to 27 N/mm (ASTM D 624 B) • Elongation at break: 350 to 700% (DIN 53504) • Resistance at break: 8 a 12 N/mm! (DIN 53504) • Hardness: ...
Diameter: 1 mm - 10 mm
Temperature: -30 °C - 155 °C
Thermoplastic polyurethane extruded sleeving Characteristics • Temperature class: F • Continuous working temperature: from -30°C to +155°C. Peaksat +185°C (few hours) • Dielectric strength: 8 to 15kV (depends on the thickness) • ...
Diameter: 6 mm - 60.3 mm
Connecting two pipes Aseptic flange connection according to DIN 11864-2 with buttweld ends for orbital welding with O-Ring. Material: 316L (1.4435), Fe < 0.5%. Sterilizing temperature: 150°C. With marking of batch number, material, ...
CONNECTORS
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining