- Hydraulics - Pneumatics >
- Valve >
- Pressure regulator
Pressure regulators
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Pressure: 10 psi - 300 psi
Flow: 85, 140 l/min
Orifice diameter: 0.13 in
Clippards Regulators are offered in two versions, relieving and non-relieving. The relieving regulator will maintain a constant pressure output even if there is a change in the downstream ...
Clippard
Pressure: 300 psi
Flow: 140, 85 l/min
... plunger-actuated regulators are made in relieving or non-relieving forms and will work with a good pressure rating setup even if the downstream conditions in a spot change. This does not compensate for ...
Clippard
Pressure: 10 psi - 100 psi
Flow: 85, 140 l/min
Orifice diameter: 0.13, 0.75 in
The MAR-1C with maximum Psi 0 to 100 psig is ideal for pressure regulation. It operates at 32 to 230 degrees F. It has 10-32 thread ports. At 0.1600 kg and 1/4 stem travel, the nominal force is 13 lbs with a flow of ...
Clippard
Pressure: 2 bar - 10 bar
Orifice diameter: 0.13, 0.25 in
Series CLR micro pressure regulators are available with G1/8 and G1/4 connections. A piston with or without relieving and VS function (by-pass valve) has been incorporated into its design. The body ...
CAMOZZI AUTOMATION
Pressure: 0 bar - 10 bar
Orifice diameter: 0.13 in
The Series TC pressure regulator has been designed to be used for all the applications and equipment where it is needed to insert the single component in customized integrated pneumatic circuits (manifolds) ...
CAMOZZI AUTOMATION
Pressure: 0 bar - 10 bar
Orifice diameter: 0.25, 0.13 in
» Knob with closure » Integral return exhaust (relieving) Series N pressure regulators are available with G1/4 and G1/8 ports. Their design incorporates a self relieving diaphragm so as to allow ...
CAMOZZI AUTOMATION
Pressure: 0 bar - 12 bar
Flow: 550, 400 l/min
Quantity per package: 0 Minimum order quantity: 0 Unit of measure: items Valves Functional denomination: Sandwich regulator for bases ISO 5599/1 Max temperature (°C): 60 Min temperature (°C): -10
METAL WORK
Pressure: 0 bar - 15 bar
Flow: 570 l/min - 7,600 l/min
Orifice diameter: 0.13 in - 1 in
... in maintaining the pressure setting, both with both variable flow rates and different supply pressures. The regulator indudes a compensation system that keeps the pressure ...
METAL WORK
Pressure: 0 bar - 15 bar
Flow: 1,100 l/min - 20,000 l/min
Orifice diameter: 0.25 in - 2 in
... its own constant operating pressure. It is necessary to use a regulator to regulate the pressure within a set range by means of regulating springs, with the pressure ...
METAL WORK
Pressure: -1 bar - 12 bar
Flow: 150 l/min - 1,630 l/min
Orifice diameter: 0.13 in - 0.5 in
The directly actuated valve with integrated pressure compensation regulates dynamically and precisely even with large nominal widths. An efficient plunger actuator makes VPPI highly dynamic, a subordinate position controller ...
FESTO
Pressure: 0.5 bar - 7 bar
Flow: 350, 170 l/min
Temperature: -5 °C - 50 °C
... requirements • Stabile control response • With or without pressure gauge • Rotary knob with latch • With integrated secondary venting and primary venting with return flow function • MS2: Direct operated ...
FESTO
Pressure: 0.5 bar - 12 bar
Flow: 1,700 l/min
Temperature: -10 °C - 60 °C
... with minimal pressure drop • Good regulation characteristics with minimal pressure hysteresis and primary pressure compensation • With or without secondary venting • Lockable rotary ...
FESTO
Pressure: 50 bar - 200 bar
Flow: 0.13 l/min - 15 l/min
Orifice diameter: 4 mm - 12 mm
Material pressure regulators Pulsation-free dispensing with the right pressure DOPAG material pressure regulators reduce the pressure of the pumped ...
Pressure: 0.5 bar - 13 bar
Temperature: -10 °C - 50 °C
•High flow rates, up to 850 Nl/min •ATEX II 2GD certified •G1/8 – G1/4 ports •Aluminium Die-casted body
PNEUMAX
Pressure: 0.5 bar - 20 bar
Flow: 8,000 l/min
Orifice diameter: 5, 20, 50 µm
• Diaphragm pressure regulator with relieving • Available in 4 sizes with flow rates up to 8000 Nl/min and connections from 1/8” to 1” • Low histeresis rolling diaphragm and balanced spool • Available ...
PNEUMAX
Pressure: 0.5 bar - 20 bar
Temperature: -30 °C - 80 °C
• Piston piloted pressure regualator • Available with pressure gauge or digital pressure switch integrated • Atex certification (II 2GD or II 3GD) • Inlet pressures up to 20 bar
PNEUMAX
Pressure: 700 bar
Flow: 5.77, 25, 11.3, 45 l/min
Orifice diameter: 2, 4 mm
... pump can be used as a hydraulic pump. The compact hydraulic power pack type KA and KAW is suitable as a highly compact control system, since connection blocks and valve banks can be directly mounted. Features and ...
HAWE Hydraulik SE
Pressure: 700 bar
Flow: 6.3 l/min - 24 l/min
Orifice diameter: 4, 3, 43, 44, 48 mm
... operating modes S1 (continuous operation), S2 (short period operation), S3 (periodic intermittent operation) or S6 Speed control possible with frequency converter Intended applications: Clamping systems and tool ...
HAWE Hydraulik SE
Pressure: 700 bar
Flow: 25.16 l/min - 108 l/min
Orifice diameter: 42 mm - 404 mm
The compact hydraulic power pack type MPN and MPNW consists of the tank, the integrated motor and the radial piston or gear pump directly attached to the motor shaft. Single-circuit or dual-circuit systems can be assembled. Type MPN includes ...
HAWE Hydraulik SE
Pressure: 0 bar - 400 bar
... High pressure capability up to 400 bar •Metal sealed and/or down-ported versions available •High accuracy and repeatability Applications •Gas and liquid chromatography •Fermenter pressure control ...
Bronkhorst
Pressure: 1.28 bar - 64 bar
Bronkhorst® EL-PRESS Metal Sealed Pressure Meters and Controllers are characterised by their unique, patented metal-to-metal seal construction with excellent resealing capability. Furthermore they distinguish themselves ...
Bronkhorst
Pressure: 0.7 mbar - 400,000 mbar
Flow: 0.1 l/min - 100 l/min
Orifice diameter: 0.01 mm - 2 mm
... Applications •Process pressure control in food, pharma and (petro-)chemical installations •Fermenter pressure control (Biotechnology) •Fuel Cell technology •Protective ...
Bronkhorst
Pressure: 0.3 bar - 10 bar
Flow: 0.13 m³/s
Temperature: -20 °C - 65 °C
... • Flush mounted integrated gauge • Tamper resistant options using built in padlock Port size: - G1/2 Maximum inlet pressure: - 20.0 bar
Norgren
Pressure: 0.3 bar - 10 bar
Flow: 0.13 m³/s
Temperature: -20 °C - 65 °C
... • Flush mounted integrated gauge • Tamper resistant options using built in padlock Port size: - G3/8 Maximum inlet pressure: - 20.0 bar Gauge: - Integrated Gauge
Norgren
Pressure: 0.7 bar - 17 bar
Flow: 0.13 m³/s
Temperature: -20 °C - 65 °C
• Reduced weight and size • Flush mounted integrated gauge Port size: - G3/4 Maximum inlet pressure: - 20.0 bar
Norgren
Pressure: 0 bar - 14 bar
The IR 3000 Series Regulator with 3/4" & 1" sizes, made from only high grade materials. Built to withstand any kind of working condition. With modular design for easy transport and assembly and bright, flush mount gauge ...
ARO, Ingersoll Rand
Pressure: 0 bar - 14 bar
Ingersoll Rand ARO 2000 Series Regulator offers industry-leading flow rates. The completely modular design of the regulator includes a panel nut and has a bright flush mount gauge that has a settable ...
ARO, Ingersoll Rand
Pressure: 0 bar - 10 bar
Ingersoll Rand ARO 1500 Series Regulator is available in 1/4" and 3/8" sizes, with 0-30, 0-60, and 0-140psi spring options. It provides industry-leading flow rates with modular design and a full line accessory set. It ...
ARO, Ingersoll Rand
Pressure: 20 psi - 500 psi
Orifice diameter: 0.25 in
Temperature: -60 °C - 150 °C
For using gas and liquid Diaphragm material: 316L stainless Steel Body material: 316L stainless Steel Seat material: Teflon, PFA, and Spécial Teflon Seat available CV flow coefficients: 0.06 Process connection: WNPT female Two gauge ...
Golden Mountain Enterprise
Pressure: 1.96 bar - 245.17 bar
Temperature: 80 °C
... spring-loaded piston and adjusting nut as well as o-ring to protecting gauges. The protector closed at a set point pressure when over pressure flow in to gauges. Technical Data Connection Size: ‘/2"NPT ...
Golden Mountain Enterprise
Pressure: 150, 500, 250 psi
Orifice diameter: 0.5 in
Temperature: -60 °C - 150 °C
Diaphragm material: 316L stainless Steel Body material: 316L stainless Steel Seat material: Teflon, PFA, and Spécial Teflon Seat available CV flow coefficients: 1.0 Process connection: Vè”NPT female Two gauge connection ports are: ...
Golden Mountain Enterprise
Pressure: 0.5 bar - 30 bar
Flow: 15 m³/h
Orifice diameter: 2 in
... of WITT dome pressure regulators is the result of a complex technology consisting of perfectly matched components: • - Pilot Control Tube (PCT): One of the features enabling highly accurate control ...
WITT-Gasetechnik
Pressure: 0.5 bar - 10 bar
Flow: 2.4 m³/h
Orifice diameter: 0.75 in
... dome-loaded pressure regulator-set. For high and varying flows requiring maximum pressure stability. A complete solution, applicable as a manifold pressure regulator ...
WITT-Gasetechnik
Pressure: 0.5 bar - 9 bar
Flow: 2.4 m³/h
Orifice diameter: 0.75 in
... Design (BSD) Further enabling control precision, high reliability and low maintenance A complete solution, ready to use With integrated pilot pressure regulator, and stainless steel ...
WITT-Gasetechnik
Pressure: 0 psi - 400 psi
Orifice diameter: 1.27 mm
... This is a single stage regulator, and is ideal for applications with steady inlet pressures up to a maximum of 500 psig. Outlet Pressure Range: Maximum outlet range 0-400 psi. Piston ...
Beswick Engineering Co, Inc.
Pressure: 0 psi - 50 psi
Orifice diameter: 0.89 mm
... PRDB series regulator features an improved valve design compared to the PRD series regulators. This allows for improved seal reliability and precision at very low outlet pressures, pressure ...
Beswick Engineering Co, Inc.
Pressure: 0 psi - 30 psi
Orifice diameter: 0.89 mm
... family of regulators, featuring larger 10-32 threaded inlet and outlet ports, and an improved valve design. Max Inlet Pressure Rating: This is a two stage regulator, and is ideal for ...
Beswick Engineering Co, Inc.
Pressure: 8, 5, 3, 2, 10 bar
... feature, this universal pressue control truly stands out as it guarantees improved flow rate. They used plastic to create the square unit, making it lightweight and cost-efficient. This pressure controller ...
Kendrion Kuhnke Automation GmbH
Pressure: 4, 2, 10, 8 bar
Druckregler’s pressure regulator for 2 x 3.9 mm sub plate mounting features a good regulating performance and flow rate generation. It is set at a 8 bar pressure range setting and can ...
Kendrion Kuhnke Automation GmbH
Pressure: 8, 3, 2, 5, 10 bar
Flow: 5 l/min
The universal pressure control valve has a pressure range which is 10 bar maximum and a pressure range of 05 bar in setting. Its ambient temperature ranges from 0 °C+60 ...
Kendrion Kuhnke Automation GmbH
Pressure: -15 psi - 4,000 psi
Orifice diameter: 0.25, 0.13 in
Temperature: 0 °C - 121 °C
... mechanical pressure regulator offers exceptional pressure output precision by virtue of its high-resolution control of the supply pressure. The pressure regulator unit provides bubble-tight shut-off on helium at 7 bar. Features • Pressure ...
Pressure: 0 bar - 12 bar
Flow: 600 l/min
Orifice diameter: 0.25, 0.13 in
The Air Preparation Units of Aignep are necessary for a perfect conditiong of compressed air. Filters “F”, Regulators “R” and Lubricators “L” are available in 4 sizes according to the flow and various combinations. Size ...
Pressure: 0 bar - 12 bar
Orifice diameter: 0.25, 0.13 in
Temperature: 5 °C - 50 °C
The Air Preparation Units of Aignep are necessary for a perfect conditiong of compressed air. Filters “F”, Regulators “R” and Lubricators “L” are available in 4 sizes according to the flow and various combinations. Size ...
Pressure: 0 bar - 12 bar
Flow: 3,200, 2,050, 6,200 l/min
Orifice diameter: 0.13 in - 1 in
... FRL2 M5x18 FRL3 M6x20 MANOMETER FASTENING G 1/8" FluidCompressed air. Maximum Pressure 15 bar Assembling positionVertical
The Valve provides signal when pressure is within the two set limits. The pneumatic signal is cut off when pressure is either above or below set limit
Pressure: 0 bar - 85.3 bar
Flow: 0 l/min - 50 l/min
Temperature: 50 °C
BEZARES S.A.
Pressure: 0 psi - 42 psi
Temperature: 50 °C
BEZARES S.A.
Flow: 0 l/min - 50 l/min
Temperature: 50 °C
BEZARES S.A.
Pressure: 0 bar - 10 bar
Flow: 300 l/min - 5,000 l/min
• Adjustment hand grip with locking device • Max. inlet pressure 12 bars • Adjustment field: from 0 to 10 bars • Flow:1.700 Nl/min 6 bars
Pressure: 0 bar - 8 bar
Flow: 5 m³/h - 20,000 m³/h
Orifice diameter: 17.5 mm - 115 mm
The MEDENUS gas pressure regulator type RS250 ensures a constant outlet pressure - regardless of the primary (inlet) pressure - when the gas usage varies and ensures ...
MEDENUS Gas- Druckregeltechnik GmbH
Pressure: 0 bar - 16 bar
Flow: 5 m³/h - 15,000 m³/h
Orifice diameter: 17.5 mm - 115 mm
The MEDENUS gas pressure regulator type RS254 ensures a constant outlet pressure - regardless of the primary (inlet) pressure - when the gas usage varies and ensures ...
MEDENUS Gas- Druckregeltechnik GmbH
Pressure: 0 bar - 16 bar
Flow: 5 m³/h - 25,000 m³/h
Orifice diameter: 3 mm - 115 mm
... DN50 to DN100 and a maximum inlet pressure of 16,0 bar. All gas pressure regulators are certified by DVGW and CE. The pilot operated regulators series RSP254/255 are applicable to ...
MEDENUS Gas- Druckregeltechnik GmbH
Pressure: 0.5 psi - 100 psi
Orifice diameter: 0.13 in - 0.31 in
... Subminiature Relieving Regulator is configured for accurate pressure regulation with minimal consumption. It will only relieve pressure after the output has risen above the setpoint. ...
AIR Logic
Pressure: 0.5 psi - 30 psi
Orifice diameter: 0.13 in - 0.25 in
... Subminiature Relieving Regulator is configured for accurate pressure regulation with minimal consumption. It will only relieve pressure after the output has risen above the setpoint. ...
AIR Logic
Pressure: 0.5 psi - 60 psi
Orifice diameter: 0.13 in - 0.31 in
... Subminiature Relieving Regulator is configured for accurate pressure regulation with minimal consumption. It will only relieve pressure after the output has risen above the setpoint. ...
AIR Logic
Pressure: 0 bar - 10 bar
... newest DR series Precision Regulators. Precision Regulator is characterized by a high precision and stability of the pressure adjusted thanks to a multi-membrane constructive concept. The ...
Airwork Pneumatic Equipment
Pressure: 0 bar - 15 bar
Flow: 600 l/min
The XRO series is a series of pneumatic pressure regulators manufactured by Airwork Pneumatic Equipment. Utilizing an air fluid, it features the ability to deliver a maximum pressure ...
Airwork Pneumatic Equipment
Pressure: 0 bar - 12 bar
... minimum. The pressure micro-regulator guarantees high performance with excellent stability. Structure designed for panel mounting Robust and compact dimensions to save space inside the pneumatic ...
Airwork Pneumatic Equipment
Pressure: 0 bar - 12 bar
Flow: 850 l/min - 4,600 l/min
Orifice diameter: 0.125 in
– Robust design – Modular structure Operating pressure - Max. 25 bar, depending on design Materials - Body made of aluminium pressure die-casting Cup made of metal Thread - DIN 2779 Connection ...
Pressure: 25 bar
Flow: 320 l/min
– Robust design – Modular structure Operating pressure - Max. 25 bar, depending on design Materials - Body made of aluminium pressure die-casting Cup made of metal Thread - DIN 2779 Connection ...
Pressure: 0 bar - 16 bar
Flow: 2,000, 6,000 l/min
Orifice diameter: 0.25, 0.5 in
– Robust design – Modular structure Operating pressure - Max. 25 bar, depending on design Materials - Body made of aluminium pressure die-casting Cup made of metal Thread - DIN 2779 Connection ...
Pressure: 8 bar
Flow: 150 l/min - 500 l/min
... downstream pressure is maintained with precision. The regulator has a functional design that allows for reliability and good overall performance. Thus, integration into any pneumatic system is easy. ...
MATRIX mechatronics
Pressure: 1 bar - 8 bar
Flow: 12,000 l/min
The SPR 600 is an electronically-controlled pressure regulator equipped with an 8-bit microcontroller in combination with a 1" or 3/4" pilot-assisted pressure regulator (power stage). ...
MATRIX mechatronics
Pressure: 1 bar - 8 bar
Flow: 60 l/min - 18,000 l/min
... electronically-controlled pressure regulator equipped with an 8-bit microcontroller. The control signal can be analogic, digital via RS232 or digital from the keyboard. It is converted ...
MATRIX mechatronics
Pressure: 10, 4 bar
Orifice diameter: 0.5 in - 2 in
Temperature: -15 °C - 100 °C
... Adjusting nut allows easy calibrated pressure adjustment. ◆ The balanced piston design provides a constant outlet pressure even when the inlet pressure is unstable. The supplied pressure ...
Elite Line Industrial Corp.
Pressure: 1 bar - 13 bar
Orifice diameter: 0.5 in - 6 in
Temperature: -15 °C - 85 °C
... equipments from overload pressure, maintaining consistant and precise pressure to optimize system and equipments. Wide range of application, easy maintenance and precise pressure control ...
Elite Line Industrial Corp.
Pressure: 1 bar - 13 bar
Orifice diameter: 0.5 in - 6 in
Temperature: -15 °C - 180 °C
... . Definition of a Pressure Sustaining Regulator Valve Pressure Sustaining Regulator Valve, also known as a Back Pressure Valve, is a device that ...
Elite Line Industrial Corp.
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining