|
|
|
Conductix-Wampfler air track supply systems are used to make compressed air, respiratory air, electrical power and digital data available where needed. Configurations can be implemented with C-rail systems, ManAir, WAKAIR-II, W4-airsolution or W5-traxX, all of which make it possible to use different modular components to create customer-specific systems for virtually any application.
|
|
|
AAF's universal housing makes installation of any unit filter or pre-filter combination quick and easy. The unique, adjustable locking mechanism provides positive sealing, as well as, quick release for filter service or replacement. The UF-H Housing will hold 8 different filter combinations for pulsating and smooth flow conditions. Accommodating a variety of filters including AmerKleen M-80 and DuraCel® XL Series with pre-filter; upgrades to more efficient filtration are easy.
|
|
|
Braden Manufacturing, LLC is a major supplier of gas turbine exhaust stacks and diffusers for turbine original equipment manufacturers. Whether the project is located in our backyard or on the opposite side of the world, Braden is the OEMs’ preferred choice. Braden’s exhaust system design experience is based on over 1,000 gas turbine exhaust systems and 30+ years of design innovations. For this reason Braden is often selected to design and fabricate the first exhaust components when new turbine models are introduced.
|
|
The noise suppressors of the Series "R" come used for silenziare the culverts of the gas of drainage of the endothermic motors, the culverts of aspiration and drainage of the compressori of air to pistons or pumps of the empty "type Roots" etc.
The noise that is propaga along the culvert comes convogliato in the noise suppressor.
After to have crossed the reactive section that, thanks to risonatori details to multiple rooms, cancels the impulsive tones to lowland frequency, the gaseous flow crosses the dissipative section and supplies to attenuate the upper-middle frequencies.
|
|
High-Performance Muffler Tubes
Primarily used in the automotive, on-road and off-road aftermarket; ACS Industries, Inc.’s High-Performance Muffler Tubes take steel wool packing to the next level of exhaust system functionality by combining the acoustic benefits of steel wool with the durability of knitted wire mesh.
ACS’ High-Performance Exhaust Tubes are made by wrapping a layer of steel wool over a knitted wire mesh sock and knitting another sock over that. This layered element is seamless, can be cut to length or shipped in bulk packaging. Because it is based off a knitted sock, ACS’ High-Performance Exhaust Tubes can be made to virtually any ID specifications.
|
|
Exhaust Silencers
• Low frequency design experts
• High reliability
• Long service life
Exhaust Systems
• Simple-cycle stacks
• Bypass stacks with diverters
• High temperature designs
|
|
|
SMC’s silencers and exhaust cleaners offer compact design and easy mounting. SMC’s silencers exhaust in only one direction preventing scattering of mist and noise. In addition, high strength construction prevents damage to threads from a side directional shock. SMC’s exhaust cleaners insure clean plant air and reduction of distributing noise contamination.
|
|
INFINITY
Brass push-in fittings and aluminum tubes.
Easiness and quickness of assembling.
Special patented fittings for outlet.
Diameters available: 20, 25, 32, 40, 50, 63 mm
Compatible Fluids: Compressed air, Inert gases and Vacuum
Minimum temperature: -20°C
Maximim temperature 80°C
Minimum pressure: -0.99 bar
Maximum pressure: 15 bar
UV resistant. Fireproof. Anticorrosive coating.
"MOVE THE AIR POWER"
|
|
- Aluminium pipe
- Diameters 16.5 to 100 mm (1/2'' to 4'')
- Quick connection, easy to install
- Efficient flow, no leaks
- 10 years guarantee
|
|
PIPES AND FITTINGS FOR COMPRESSED AIR RINGMAINS
System PVR (PVC alloy) and Concept ALR (aluminium) offer an easy to use, modular system for installing air networks.
|
|
* Heavy Duty HB1500 Series Feature Benefits
* Heavy Duty Brass HB1500 Series
* Medium Duty Single Stage Series 30(TM)
* Series 30(TM) 2-Stage & Single Stage Series 30(TM) Medium Duty & Heavy Duty 1500 Series Station Regulators
* Series 30(TM) Twin Pack & HVAC/R Purge and Test Regulators
* High Pressure 820 Series & Special Purpose 3-Stage Nitrogen Low Pressure
* Flowmeter Regulator, Feature Benefits
* Flowmeter Regulators, Single Stage
* Series 30(TM) Dual Flowmeter Regulator Rear Entry Liquid Cylinder Regulators & Regulators for Disposable Cylinders
* Flowmeters, Feature Benefits & Surge Protectors
* Series 30(TM) Single Stage Flow Gauges & Warranty Information
* Pressure Gauges
|
|
High quality gas regulators
Designed to maintain pressure settings for cutting, welding and heating work.
|
|
|
|
|
|
This extreme high volume air blow gun introduced as part of Coilhose Pneumatics’ new Extreme Construxion Accessories™ product line is as ergonomic as it is easy-to-use.
The Coilhose Cannon® may be used to remove heavy or stubborn debris in industrial or outdoor environments involving textiles, paper/ pulp, scrap metal, wood, concrete, asphalt, sewer, etc. or also in mining, shipyards, rail yards, heavy construction, and other areas that require extreme blow-off applications.
Its Extreme Ease Trigger™ is power-assisted and requires minimal force to actuate. This blow gun, with a 3/4 inch female inlet, is for use with tow-behind or large capacity compressors and conforms to OSHA standards.
Made from durable materials: die cast aluminum, machined brass, aluminum and stainless steel. Coilhose recommends an inlet pressure of at least 90 PSI and a hose I.D. of at least 1/2 inch.
Available with 2 inch, 24 inch, or 48 inch extensions with standard safety nozzle tip to deliver a concentrated force to a small specific area – geared for, but not limited to outdoor use. Also available with a specially engineered multi-jet nozzle tip that utilizes the Coanda effect, generating a large amount of volume and thrust over a larger targeted area efficiently – geared for, but not limited to indoor use.
The standard safety extension model consumes 135 CFM at 100 PSI, while the multi-jet model has an air consumption rating of 120 CFM at 100 PSI.
|
|
Silvent4020-LF
SILVENT 4020-LF: a unique product with Laval nozzle that combines highly concentrated blowing force with an easily maneuverable valve construction and low sound level. Its blowing force of 100 N (353 oz) is twice that of the 4015-LF. The nozzle is made of stainless steel, making it suitable for use in practically any environment where extra high blowing force is required, e.g. the paper and manufacturing industries, steel mills etc. Features adjustable blowing force that is easily adjusted to any strength between 0 and 100 %. Fully complies with EU Machine Directive noise limitations and OSHA safety regulations. Patented.
|
|
Model: PT 560
• 1500 watt air blower with two temperature settings (300°/560°)
• Robust fan for continuous operation
• Non-slip standing surface for stationary use
|
|
|
|
|
|
The use of dosing pumps involves pulsations. The rule is: the longer the line, the larger the pressure peaks. These may impair the operation, in some cases even the pump and / or the line network may be destroyed.
The PDS inline pulsation dampeners from Lutz-Jesco is a simple and also effective way to reduce pressure fluctuations to a harmless level. Due to a choice of different materials it is possible to ensure chemical resistance even in the case of very aggressive media. As the unit is integrated directly into the line the diaphragm storage is flushed continuously, and extra costs because of difficult installation work are avoided.
When mounted close to the pump, optimum results can be achieved. The PDS can be installed on the discharge as well as on the suction side. On the suction side, it often makes reliable metering only possible due to the improved flow conditions. Thus cavitation is also avoided, for example.
The PDS is needed whenever pulsating flow is undesirable or rigid piping and long suction and discharge lines are used. Its maximum stroke volume is 1,200 ml/stroke.
|
|
Rail system
The Bestapower rail as core unit in the system serves simultaneously as a compressed air line, as a running rail for carriages and stations as well as a profile for the energy carrier system and peripheral equipment such as lighting.
Rails are available as straight and as bent elements. Rail segments are up to 6 metres long. Couplings, end pieces and fastening elements complete the rail system.
|
|
|
|
|
|
Work stations
Work stations facilitate the provision of tools, small parts, testing devices etc. directly at the workplace. Their modular structure ensures individual solutions to meet specific
requirements in respect of ergonomics, productivity and operating convenience.
Tool holders
Like work stations, tool holders permit the convenient arrangement of tools and small parts directly at the workplace. Their modular construction ensures individual
solutions to meet specific requirements in respect of ergonomics, productivity and operating convenience.
Energy carrier system
Using the energy carrier system a defined working area of 3 to 18 metres can be continuously supplied with energy (compressed air and/or electricity). The energy is supplied by means of the air hose inserted in the energy chain and/or a power cable.
Data lines can also be integrated. The energy is supplied through fixed tapping stations.
For energy carrier systems rails without tapping valves or connection plates are normally used.
They can be coupled with work stations, tool holders and tool carriages.
|
|
- Model/code: Intergrabloc Panel
- Category: Modular System
- Description: Integrabloc system has been designed in order to replace the traditional connections for the assembly of regulating and gas distribution pannels. Modular elements are assembled together by screw / nut or only screw. Tightness between each element in ensured by a " diabolo" : cylinder with 2 o'rings.
|
|
INFINITY
Brass push-in fittings and aluminum tubes.
Easiness and quickness of assembling.
Special patented fittings for outlet.
Diameters available: 20, 25, 32, 40, 50, 63 mm
Compatible Fluids: Compressed air, Inert gases and Vacuum
Minimum temperature: -20°C
Maximim temperature 80°C
Minimum pressure: -0.99 bar
Maximum pressure: 15 bar
UV resistant. Fireproof. Anticorrosive coating.
"MOVE THE AIR POWER"
|
|
- Aluminium pipe
- Diameters 16.5 to 100 mm (1/2'' to 4'')
- Quick connection, easy to install
- Efficient flow, no leaks
- 10 years guarantee
|
|
PIPES AND FITTINGS FOR COMPRESSED AIR RINGMAINS
System PVR (PVC alloy) and Concept ALR (aluminium) offer an easy to use, modular system for installing air networks.
|
|
To carry out any geometry of pneumatic network, final or temporary Atlas Copco proposes Airnet piping to you: 6 diameters of aluminum tubes and a panoply supplements connections and accessories.
Insensitive with corrosion, the Airnet system preserves the quality of the air up to the point of use and offers a major asset in the control of escapes and the pressure losses énergivores. Very smooth, the internal surface of the tubes supports the flow of the fluid, minimizing of as much the energy request. The Airnet modules are guaranteed 10 years and in conformity with the directive the DEVELOPING COUNTRIES 97/23/EC. Their blue coating of standardized color makes them easily identifiable.
Diameters: from 20 to 80 mm (3/4 inch with 3 inches)
Temperatures: of -20 C with +70°C
Maximum operating pressure: 13 bars
|
|
|
Legris offers a comprehensive range of accessories featuring brass and nickel-plated brass components, silencers, manifolds, and sealing products.
|
|
Accessories for the compressed air
Accessories OETIKER for the compressed air are reliable, universal and simple. They offer fast connections at every moment.
- Rollers
- Spiral Pipes and pipes equipped
- Soufflettes
- Stabilizers
- Aluminum Pipings for network of compressed air
|
|
|
constant tension hose clamp, responds to temperature and pressure changes, low profile and high performance
|
|
Push-in Fittings
Available in both metric and inch sizes. There is a new range available in Composite material again in metric and inch sizes. Additionally Norgren offer the Plasfit series for the food and drink industry.
|
|
|
|
|
|
Family of polyurethane (PUR) hose styles up to 232 PSI (16 bar) that are lightweight and extremely flexible for specific application requirements. CEJN PUR hose offers excellent recoil ability, making it a perfect mate for small and lightweight pneumatic tools. Outlasting conventional PVC hose up to 10 times, the hose also offers
- Excellent resistance to oils, solvents, and other non-aqueous solutions
- Abrasion resistance and excellent tensile, tear, and impact strength
- Long service life with outstanding aging qualities
Styles in CEJN’s PUR hose family include:
Braided
- Straight hose: Easily springs back to original form, excellent choice for applications requiring a maximum working pressure up to 232 PSI (16 bar)
Non-braided
- Straight hose: Suitable for use with push-to-connect fittings, excellent choice for applications requiring a maximum working pressure up to 145 PSI (10 bar)
- Spiral hose: Excellent crimp resistance
- Spiral anti-spark hose: Spark and scorch resistant
Straight braided
- Electrically conductive hose: Dissipates electro-static discharge
- Anti-spark hose: Spark and scorch resistant
- Water hose: Excellent choice for compressed air in damp and wet environments
|
|
|
|
|
|
Flexeel Reinforced Polyurethane Straight Hose:
Flexeel Polyurethane Hose offers an excellent alternative to much bulkier rubber and plastic hoses. Extremely lightweight and tough, it is ideal for either outdoor contractor use or indoor industrial use. Flexeel retains its flexibility even in cold envionments. The reinforced construction eliminates the possibility of having various layers separate due to the constant expansion and contraction during pulsating operations, such as with staple or nail guns. Flexeel is available with reusable, reusuable strain relief, or quick disconnect fittings. Flexeel is also compatible with our Polyurethane reusable fittings for in-the-field replacements.
In addition to Flexeel, we also offer the following straight air hose catergories:
Water Flexeel Industrial Polyurethane Hose
FlexReel — The Best Way to Store and Transport Flexeel
Nitrile Blend Hose
General Purpose Hose
Thermoplastic Hose
Lock-On Rubber Hose
Lock-On Rubber Hose Fittings
Ball Swivel Lead-In Hose
Pigtail Assemblies
Manifold Coupler Whip Hose Assembly
Brass Hose Fittings
Hose Crimpers
Hose Ferrules
Clamps, Installation & Removal Tools
|
|
|
|