|
|
Adjustable Air Amplifier - Nex Flow™:
- Adjustable Air Amplifier from Nex Flow™ is used for a variety of applications - either coated aluminum or stainless steel for high temperature and corrosive environments.
- Adjustable Air Amplifier is easy to mount and maintain. Compressed air consumption and noise levels are reduced.
- Adjustable Air Amplifier takes energy from a small volume of compressed air to produce high velocity, high volume, low pressure output airflow.
- Adjustable Air Amplifier is quiet, efficient and can amplify flows up to 20 times their input air consumption rate.
Specifications:
Stainless steel or coated aluminum are materials of construction. Three standard outlet (outside) diameters: 1-1/4" (31mm), 2" (51mm), 4" (200mm). Other sizes available upon request.
Come with a standard .002" (.05mm) gap that is adjustable. If greater force is required, the gap may be adjusted for greater flow.
|
|
Streamtek's Adjustable Air Amplifiers are a simple, low cost way to move, smoke, fumes, air, and light materials. Using a small amount of compressed air as their power source, our Adjustable Air Amplifiers pull in large volumes of air from the surrounding environment to produce high velocity, high volume outlet flows. Quiet, efficient Air Amplifiers will create output flow sup to 30 times their consumption rate.
ADVANTAGES OF AIR AMPLIFIERS
- Easy to mount and maintain.
- Instant ON/OFF with no moving parts, no electricity or explosion hazard.
- Adjustable output without tools or shims
- Quiet Operation
- Compressed air operated
> > > > (SPECIFICATIONS)
Stainless steel or aluminum are materials of construction. Four standard outlet (outside) diameters: 1-1/4" (31mm), 2" (51mm), 2-1/2" (64mm), 4" (200mm). Other sizes available upon request.
|
|
|
|
|
|
JetBlack
ACI’s JetBlack Personnel Cleaning Station is an innovative, safe, and cost-effective solution for the cleaning and de-dusting of personnel and equipment. It delivers high volumes of air at low pressure avoiding the potential health risks associated with compressed air. It is also cheaper to operate and the air is clean with no moisture or oil contamination.
The JetBlack is available either as a wall-mounted or portable unit, the latter permitting its use wherever it is required. It is ideal for clean rooms and factory environments where dust, dirt, fibres or water need to be removed effectively from personnel clothing, footwear or from products during the manufacturing process.
Delivering a high volume of air at below 2.1 psi, the JetBlack delivers air safely, even when aimed directly at bare skin. It is also relatively quiet with noise levels below 78dB(A) compared to a typical compressed air noise output of between 110 and 140 dB(A).
It is economic to use. It is blower powered and operates on a time switch that ensures it cannot be left on for extended periods.
|
|
|
|
|
|
AIRSET® TUCANO - the "World Class" air blow gun
New concept, new style: AMPLA is pleased to introduce its new series of air blow guns AIRSET® TUCANO , designed and developed to match the most demanding user's needs.
Try to believe...
The AIRSET® guns are designed and manufactured to satisfy the needs of compressed air cleaning and are suitable for use in various production sectors.
ERGONOMICS = PRACTICALITY AND COMFORT The ergonomic design makes the guns easier to use and ensures the best blowing position, avoiding unnecessary twisting of the user’s wrist.
SOLIDITY = RELIABILITY The use of high quality plastic materials and the careful control of the production processes ensure excellent resistance and durability.
PROGRESSIVENESS = EFFICACY AND EFFICIENCY The delivery device controlling the quantity of air dispensed allows for infinite and progressive adjustments of the flow, making cleaning more precise and effective.
SILENT OPERATION = SAFETY The noise level of all the AIRSET ® guns is less than 80 db(A), in compliance with the European Machines Directive.
|
|
Air Blow Gun - Typhoon High Volume Blow Gun
The Typhoon is Coilhose's most powerful blow gun, delivering up to 51 CFM and over three pounds of thrust at 125 PSI. The Typhoon is ideal for heavy-duty clean-up and blow-off, and its light-weight and sleek design make this gun a favorite. The Typhoon meets or exceeds OSHA regulations and features a variable flow trigger for controlled blow-off.
Coilhose Pneumatics also offers a variety of tips for the Typhoon, including a Siphon Tip that can evenly distribute a liquid over a large surface area.
We also make many other types of air blow guns (many are OSHA Compliant):
600 Series Blow Guns
600 Series Premium Blow Guns
High Volume Air Flow Blow Guns
Button Blow Guns
In-Line Blow Guns
700 Series Blow Guns
770 Series Pistol Grip Blow Guns
Typhoon Pro
Deluxe Blow Gun Kit
Ultimate Blow Gun Kit
Blow Gun Replacement Tips
Needle Blow Gun Tips
|
|
Legris blowguns combine a progressive trigger action with a powerful and quiet air jet and they are suitable to many applications: automotive industry, building machines...
Working presure: up to 35 bar, working temperature: from -20 to +80°C.
|
|
Blow gun with metal nozzle
Reference 27102 MTL
Diam. 3 x 6 mm steel nozzle, 110 mm bent tube, Blow gun with flow limiter
Blow gun with composite nozzle
Reference 27102 PREBP3
At 6 bar inlet, the air jet is equivalent to the one of a standar blow gun with a 3 bar intlet.
Blow gun with silent nozzle
Reference 27102 SIL
Composite nozzle lowers noise levels, 56 mm bent tube, Complies with OSHA requirements
Blow gun (OSHA & Venturi effect)
Reference 27102 OSH
Composite nozzle, 69 mm bent tube, Complies with OSHA requirements, 6 bar dynamic pressure (12 bar 10 mm from nozzle)
|
|
|
The Nycoil Blow Gun offering is the most complete in the industry. In addition to a wide variety of tips that are designed for a multitude of special functions, we have a selection of blow gun body styles to meet the preferences of any user.
|
|
Les soufflettes RT, de construction robuste et d’utilisation aisée, ont été conçues pour assurer le nettoyage par soufflage et la pulvérisation.
Caractéristiques :
■ Faibles à fortes pressions,
■ Petits à gros débits d’air...
tout en contrôlant très strictement la consommation d’air comprimé.
Ces produits sont destinés à un très grand nombre d’applications dans des domaines extrêmement divers :
■ Forges
■ Fonderies
■ Ateliers de mécanique
■ Nettoyage de pneus d’automobiles…
Ces soufflettes existent en deux gammes :
■ Soufflage
■ Pulvérisation
|
|
Tube: Synthetic NBR rubber, black and smooth
Reinforcement: textile braided high tensile synthetic yarn
Cover: black Neoprene compound, oil resistant, smooth
Application: standard air brake replaceable couplings, reference with SAE specifications.
Temperature: -20℃~+100℃
Length: as request
Packing: P.V.C. film, reel packing available
|
|
For almost ten years, Valpar has offered tubing specially designed for the automotive industry. Many leading manufacturers around the globe use Valpar fuel lines and air brake tubing. As a cutting edge innovator, Valpar has progressed and increased its portfolio to offer value-added products such as thermoformed and cut to length tubing.
Valpar manufactures a wide range of nylon airbrake to meet the stringent demands of the automotive market. Valpar nylon air brake tubing is an alternative to other materials like rubber hose and metal tubing. The benefits of nylon over other materials include:
• Great savings in weight of the tubing, making it easier to work with
• Superior resistance to elements which can effect this part of the system eg. oil, gasoline, chemicals and many others
|
|
|
Air driven amplifiers are used to bring shopair pressure to a higher level. Compression ratios of 1:2, 1:4 or even higher are possible. Amplifiers can be built as a system or with a reservoir. Applications are increasing cylinderforce, pressurising shopair locally and saving the lifetime of your compressor by reducing your maximum pressure.
|
|
|
|
|
|
HAA31 Models
Single-acting, single-stage air pressure amplifiers
3 models with ratios of (2.5:1), (3.5:1) & (4.5:1)
Maximum inlet pressure of 125 psi
Maximum outlet pressures from 320 psi to 600 psi
AA Models
Single-acting, single-stage air pressure amplifiers
3 models with ratios of (8:1), (15:1) & (30:1)
Maximum inlet pressures from 1,250 psi to 4,500 psi
Maximum outlet pressures from 2,500 psi to 4,500 psi
AAD Models
Double-acting, single-stage air pressure amplifier provides outlet flow on each stroke of cycle and gains "lift" from inlet pressure
4 models with ratios of (2:1), (5:1), (15:1) & (30:1)
Maximum inlet pressures from 300 psi to 4,500 psi
Maximum outlet pressures from 300 psi to 5,000 psi
AAT Models
Two-stage air pressure amplifier provides two high pressure pistons of different ratios within a single unit for maximum efficiency at higher outlet pressures
3 models with ratios of (7/30), (15/30) & (30/50)
Maximum inlet pressures from 300 psi to 3,000 psi
Maximum outlet pressures from 4,500 psi to 5,000 psi
|
|
FEATURES - BENEFITS - APPLICATIONS
- Compact: installs off the floor, out of the way, in any position.
- 2 connections: plant air in, amplified air out. (Pilot air connection is ptional for start-stop control with a PCV valve or solenoid valve and pressure switch).
- Can replace a dedicated air compressor: 10 HP size in a typical large plant spot requirement for 100 PSI when only 80 PSI is available. (Model 5A-DS-2)
- Replace bottled nitrogen: up to 700 PSI for air testing, lab or production. (Model 5A-DS-5)
TYPICAL APPLICATIONS FOR HIGHER AIR PRESSURE
- Valve actuators
- Air starters
- Bin vibrators
- Pneumatic drill motors
- Air clamps
- Air brakes
- Off road tires
- Pneumatic nailers,staplers, straping machines
- Air/oil hoists
- Air presses
|
|
|
ITW Vortec’s Round Transvectors use a small amount of filtered compressed air to deliver a large airflow for a wide range of conveying, ventilation, drying and cooling applications. The high-flow, bladeless blowers don’t require machine guards and are especially useful for removing plastic scrap and metal chips, ventilating fumes or smoke, and conveying small parts, pellets, powders and dust. As a vacuum or blowoff device, these air amplifiers are more compact and less expensive than variable-speed blowers and fans, provide instant on/off performance, and operate at low noise levels to meet OSHA requirements. Round Transvectors are easily mounted and, with no moving parts to wear out or break, are virtually maintenance-free. Used in ducted and unducted applications, Round Transvectors are available in several sizes, in both aluminum and stainless steel, and can deliver flow rates from 32 to 2300 SCFM.
|
|
|
|
|
|
Meech Air Technology High Thrust Jets are designed to provide a high power blast of air whilst reducing compressor demand and lowering noise levels. The High Thrust Jets use a very small amount of compressed air to generate a high power blow off force. This is achieved by forcing compressed air through an adjustable internal circular slot. The high velocity air from the slot generates an area of low pressure at the rear of the jet that entrains ambient air at a ratio of 4:1. This maximises the high power blow off.
Meech Air Technology Energy Saving Air Amplifiers provide large airflows whilst only consuming a minimal volume of compressed air. A tiny amount of compressed air is released through an adjustable circular slot inside the Air Amplifier creating a 'tube' of air. The 'tube' of air then travels towards the front creating areas of low pressure behind and in front that entrains ambient air at a ratio of 12, 20 and 25:1 depending on the size of air amplifier. Meech Air Amplifiers are available in three sizes in Stainless Steel or Aluminium to suit a wide range of applications.
|
|
|
Air amplifier is easy to mount and maintain reducing both compressed air consumption and noise levels. It takes energy from a small volume of compressed air to produce a high velocity, high volume, low pressure output air flow.
|
|
A simple, low cost way to move air, smoke, fumes, and light materials.
Air Amplifiers utilize the coanda effect, a basic principle of fluidics,
to create air motion in their surroundings. Using a small amount of compressed air as their power source, Air Amplifiers pull in large volumes of surrounding air to produce high volume, high velocity outlet flows. Quiet, efficient Air Amplifiers will create output flows up to 25 times their consumption rate.
|
|
|
Energy Saving Safety Blowguns from Meech combine an ergonomic lightweight gun handle with the Meech Air Saver Nozzle. The innovative nozzle design forces compressed air through an adjustable circular slot and then directs it at high velocity over the outside of the nozzle cone. The design amplifies the output airflow by entraining the ambient air at a 25:1 ratio. Meech blowguns typically save up to 70% of compressed air usage compared to conventional types of blowgun whilst dramatically reducing noise levels.
|
|
Silvent2050-S
SILVENT 2050-S: with a stainless steel nozzle. Extremely tough but, at the same time, handy aluminum gun. The perfect choice whenever durability is more important than a lot of technical finesse. The standard version of this gun is fitted with a durable stainless steel nozzle with a solid tip for the toughest conditions. Fully complies with OSHA safety regulations and EU Machine Directive noise limitations. Patented.
|
|
"Kit for Truck" is a pneumatic device designed to provide the internal cabins cleaning using compressed air. It is composed by a blow gun, a polyurethane spiral hose, a quick coupler and a linear end for the connection to the pneumatic auxiliary system of the truck.
The connection system is available in different versions, compatible with the main industrial vehicles' companies: IVECO, RENAULT, SCANIA and, in the universal version, for all others companies.
|
|
|
|
|
|
Ultimate Blow Gun Kit
The Ulitimate Blow Gun Kit is ideal for display. Like the Deluxe Model, this kit is compact, durable, and included a wide range of tips. Its tough, transparent window allows customers to view the kit's contents. Suitable for showroom environment. The kit can be displayed on a shelf or hung, giving the distributor a variety of ways to showcase the product. Contents lock into place within the kit to ensure that they remain stationary and undamaged when not in use.
Includes: 771 Pistol Grip Air Blow Gun, Tips: Non-Safety Tip, Standard Safety Tip, Safety Booster Tip, High Volume Safety Tip, Inflator Tip, Rubber Tip, Assortment of Five Need Tips, and 10" Safety Extention Tip.
Connectors: Industrial interchange connector and automotive interchange connector (might be different interchanges for non-USA market)
We also make many other types of air blow guns (many are OSHA Compliant):
600 Series Blow Guns
600 Series Premium Blow Guns
High Volume Air Flow Blow Guns
Button Blow Guns
In-Line Blow Guns
700 Series Blow Guns
770 Series Pistol Grip Blow Guns
Typhoon
Typhoon Pro
Deluxe Blow Gun Kit
Blow Gun Replacement Tips
Needle Blow Gun Tips
|
|
High Pressure Spray Gun/Lances
Heat resistant nylon trigger. Available with a variety of lances.
Normal flow rate: 10.5 gpm.
Pressure range: 2900 - 4050 psi.
Maximum temperature: 320º F.
Spray angle: adjustable from a straight jet to a large-angle spray.
Materials: fiberglass reinforced nylon (body), brass, 203 stainless steel, 440 stainless steel. Typical applications: high-pressure washing.
|
|
SP 503: Depending on their discharge pressure and capacity, the spray guns and lances are suitable for washing, cleaning and cutting.
- Operating pressure max: 500 bar
- Recommended flow rate max: 75 l/min
- Length of standard tube: 800 mm
- Overall weight: 2.35 kg
|
|
|
|
|
|
Safely and Quickly Removes Tough Materials
Flow International Corporation's A-3000 ultra light hand tool combines the power of ultrahigh-pressure (UHP) water (and its relatively low water volumes) with extremely high nozzle rotation speeds. The result is a versatile tool that offers excellent removal rates for a wide variety of industrial cleaning projects.
This multi-purpose tool offers superior performance and control. Rotating a variety of multiple-orifice tips at up to 3,000 rpm, the A-3000 delivers as much as 6.5 gallons (22.7 liters) per minute of ultrahigh-pressure water. It is the only hand tool rated for operating pressures of 45,000 psi (3,100 bar).
Multiple Applications Multiply the Savings
The A-3000's high rotation speed makes it the ideal tool to remove the toughest coatings, including epoxies, resins, paint, rust, scale, calcium deposits and oxides. And because it is air-powered, the A-3000 is easily operated from any compressed air supply.
With its unmatched productivity and low water volumes, the A-3000 is an environmentally-sensible alternative to grit blasting, burning and chemical removal. The A-3000's light weight reduces operator fatigue so workers can work longer, and more safely.
Benefits
Reduced operator fatigue improves safety and productivity
Pneumatic power means no oil spills
High removal rates with minimal waste water
Standard Features
Remotely located on/off valve
Advanced ergonomic design
Lightweight
Patented swivel design allows quick change of high-pressure seals and easy maintenance
Second safety trigger requires operator to have both hands on tool for safe operation
Runs from any compressed air source with greater than 32 scfm at 90 psi
Flow patented HornetTM nozzles
Specifications
Tool weight: 11.0 lbs (4.98 kg)
Maximum operating pressure: 45,000 psi (3,100 bar)
Air required: 32 scfm @ 90 psi
Working rotation speed: 3,000 rpm
Motor horsepower: 0.7 hp (0.5 kW)
|
|
Eco Top guns include high-pressure guns with operating pressures up to 2500 bar with pneumatically driven lead-through and electric or pneumatic remote control.
Equipped with guard bow and trigger safety lock. Plastics hand grip and stainless steel lead-through.
High cleaning efficiency due to rotating nozzle carriers.
Rotational speed control due to air pressure and air flow rate.
Fully covered hand grip in two-sheet design, made from impact resistant and chemically resistant plastics (protection system IP 67).
All functional parts are protected against penetrating water and dirt.
Special air motor with stainless steel housing
Nozzle pipes with protection pipe between 300 and 770 mm
|
|
Coilhose Pneumatics offers the following coiled pneumatic hose types:
Nylon Air Hose
StowAway Heavy Duty Nylon Air Hose
SlimCoil Nylon Air Hose
Twin Bonded Nylon Air Hose
Nylon Hose Fittings
Flexcoil Polyurethane Air Hose
Flexcoil Assemblies with Quick Disconnects
CUB Coil Polyurethane Air Hose
Flexeel Polyurethane Reinforced Coiled Air Hose
|
|
Recoil Airline Coils
* Pre-coiled seamless Nylon (PA) 12, supplied with factory fitted 360° swivel male couplings, complete with spring guards.
* Stock sizes from 8mm to 12mm OD in 2.5m 5m & 10m working lengths
* Easily Installed
* Lightweight
* Spring Guards
* Highly Flexible
Technical Information
* Temperatures: -35°C to +70°C. Occasional use up to 120°C. Brittle point: -70°C. *
* Lightweight
* Highly flexible
* Easily installed to suit a variety of horizontal or vertical applications
* All the benefits of Colex Nylon tubing in a handy re-coil format
* Resistant to moisture absorption
* Provides consistent flexing over a wide operating temperature range and humidity conditions
* Spring guards are fitted to both ends of the tube to prevent kinking and a choice of 1/4″ and 3/8″ BSP end fittings are available from stock
|
|
The tight diameter of our Mini-Coils make them extremely flexible and ideal for use with robotics, instrumentation, small pneumatic tools, control circuits or any other application requiring either constant or intermittent motion. They are available in Nylon (higher pressure rating and heat resistance) or Polyurethane (more flexibility) and include a pigtail on each end for easy fitting installation or connection to other devices.
- Recommended working length is 85% of the total length.
|
|
|
|