|
|
| The range presented in this chapter consists of axial fans suppliers (VRE), with grill (VGR) or professional basket grill (VPR), round (VGV) or square (VGC) rings, and threephase motor (VREt, VGRt, VPRt, VGVt, VGCt). In response to your specific needs, the air flow, power, rotational speeds (multispeed by windings or by controllers), noise level, overall dimensions and finish... of the professional fans can be specifically defined according to your requirements. |
|
| The range presented in this chapter consists of centrifugal double inlet professional fans. In response to your specific needs, the air flow, power, rotational speeds (multispeed by windings or by controllers), noise level, overall dimensions and finish... of the fans can be specifically defined according to your requirements. |
|
Selecting between DC Professional fans and AC Fans:
First, consider whether you want DC fans or AC fans. In the past, the higher cost of DC fans led to the almost exclusive use of AC fans. Now that this price differential has disappeared, the many advantages of DC fans make them the best choice. One advantage of DC fans is longer life. Another is almost 60% less power consumption than AC fans. According to industry experts, a 10°C increase in fan temperature can reduce its life by as much as 20,000 hours.
Another selection factor is that the speed of DC fans is directly proportional to voltage, so it can run at the speed required for adequate cooling. However, usually DC fans runs at less than maximum speed, creating less noise, and using less power. |
|
Short or long shell made of hot-dip galvanised steel sheet
Multiblade aluminium impeller with adjustable-pitch blades (adjustable when rotor stopped)
Two-piece cast aluminium hub allows blade pitch to be adjusted when rotor stopped
1 or 2-speed IP55 motor coupled directly to hub
Powerful flows of outgoing air or incoming unladen air in commercial (carparks) and industrial facilities
Impeller with adjustable-pitch blades (adjustable when rotor stopped)
9 models ranging from 1,250 to 95,000 m3/h
Pressures of up to 750 Pa
Smoke extraction: 2 hours, 200°C and 2 hours, 400°C |
|
CHV Series
Features:
1. Compact, large airflow, and low noise
2. Bellmouth design of casing, high airflow
3. Steely manufacturers of bearings, suitable for continuous applications
4. Can be installed by horizontal, vertically, and obliquely directions
Casing and impeller are made by sheet steel |
|
In any situation in which air circulation improves working or production conditions,
the Nylair® brings an adaptable solution:
air cleaning and renewing,
cooling of hot environments,
acceleration of drying and evaporation,
extraction of vapours and steams.
The Nylair® professional fans are axial ventilators covering a wide flow range (1000 to 35000 m3/h).
They of course, conform to CEE standards.
Their design allows for a direct and easy installation.
Their robust construction is ideal for arduous conditions:
anti corrosion protection
steel or thermoplastic and stainless steel impellers |
|
| The range presented in this chapter consists of axial ventilators (VRE), with grill (VGR) or basket grill (VPR), round (VGV) or square (VGC) rings, and threephase motor (VREt, VGRt, VPRt, VGVt, VGCt). In response to your specific needs, the air flow, power, rotational speeds (multispeed by windings or by controllers), noise level, overall dimensions and finish... of the professional fans can be specifically defined according to your requirements. |
|
HJB MANN
HJB 80 - HJB 120
DESCRIPTION:
Helicoidal professional fans
Airflow: 32.000 - 45.000 m3/h
APPLICATIONS:
- General ventilation.
- Renovation of suffy air enviroment.
- Poultry farms and greenhouses. |
|
Mounting size for AC-input: 80mm - 250mm
Mounting size for DC-input: 42mm - 119mm
Air capacity 0.18m³/min - 24m³/min
Static pressure 12Pa - 360Pa
AC-input: 200/220/230V AC or 100/110/115V AC
DC-input: 12V DC or 24V DC
Marking: CE, UL and cUL
Long-life type also available (MDE-Series). |
|
| Beside the SEPA Kleinstlüftern we offer starting from 60x60 mm of exhausts of the mark Costech. Here both DC and AC exhaust are available. |
|
Design Complete axial fans (motor + ring-/or tubular housing with attached console + impeller + protective mesh) Used in the 200 - 600 Pa pressure range and for air volumes of 2,000 - 8,000 m3/h. Media temperatures - 40 to + 60 °C
Main applications Rail vehicle transport technology, air conditioning rail version
Special applications Cooling and ventilation, air conditioning with noise insulation
Performance range 370 - 2200 |
|
Axial duct professional fans EZR/DZR for commercial use: durable, powerful and robust
For ventilation or air extraction of
· Showrooms
· Foreman%u2019s offices
· Workshops
· Production sites
As well as for machine extraction
High degree of protection IP55
Can be fitted in any position
Duct sleeve made of galvanised sheet-steel, with flanges on both sides
Single phase AC version (EZQ/EZS) and three-phase AC version (DZQ/DZS)
Pole-changeable version, for two speeds
Special versions available on request
Air flow volume up to 15,000 m³/h
|
|
Axial wall professional fans EZQ / DZQ resp. EZS / DZS: for commercial use: durable, powerful and robust
For ventilation or air extraction (“E”-version only for air extraction) of
Production facilities
Commercial premises
Garages
Portacabins
Storage facilities
High degree of protection IP55 resp. IP54
Can be fitted in any position
With square wall plate (EZQ/DZQ) or wall ring (EZS/DZS)
Single phase AC version (EZQ/EZS) and three-phase AC version (DZQ/DZS)
Pole-changeable version for 2 speeds
Special versions available on request
Air flow volume up to 15,000 m³/h
|
|
| The range presented in this chapter consists of backward curved industrial centrifugal fans. In response to your specific needs, the air flow, power, rotational speeds (multispeed by windings or by controllers), noise level, overall dimensions and finish... of the professional fans can be specifically defined according to your requirements. |
|
COPPUS® Double-Duty Heat Killer
Powerful Industrial ventilator for Cooling Products, Processes and Personnel
With airflows up to 17,000 cfm the Double-dutyTM Heat Killer (DDHK) is one of the most powerful and versatile portable air movers on the market today. The patented, adjustable guide vane design allows air flow control-from a gentle breeze for personnel cooling, to a concentrated jet blast for product and process cooling.
FEATURES:
- Adjustable guide vanes allow varied air movement from a gentle breeze to a jet blast
- Available in 18-, 24- and 30-inch (457, 610, 762 mm) models
- 18- (457 mm) and 24-inch (610 mm) models available with optional two-speed, totally enclosed motors (115V only)
- Models available in floor stand or wall mount models
- Heavy-duty, rugged steel housing and frame
- Protective screens meet OSHA guidelines
- Available with TE and EP motors
- Hazardous location switches and motors meet NEC Class I, Division I, Group D and Class II, Division I, Groups F and G specifications
- Thermal overload protection on motors |
|
Quality is built into each fan. Starting with the finest materials available, using computer aided precision cutting equipment, properly trained personnel and incorporating the latest assembly techniques, insures that each KCH Services fan is of the finest quality.
To better serve our customers, KCH offers a complete line of replacement parts include belts, manufacturer of bearings, wheels, shafts, motors, as well as complete housings, epoxy coated steel frames, belt and shaft guards and flexible inlet connectors specification.
KCH Services certifies that the CI and NH Professional fans shown herein are licensed to bear the AMCA Industrial seal. The ratings shown in our fan catalog are based on tests and procedures performed in accordance with AMCA publication 211 and comply with the requirements of the AMCA Certified Ratings Program. |
|
Paxton's Fume Exhausters and Vacuum Producers provide a reliable, non-pulsating source of air / fume vacuum which is ideally suited for applications such as:
- Flat Sheet Hold-Down
- Air Monitoring & Sampling
- Pneumatic Conveying
- Suction Pick-Up
- Professional tank Exhaust Systems for Brewing or Storage
- Textile / Professional fabric Cutting Systems
- Professional bag or Package Filling
- Transfer of Air or Gases
- Process Air
- Fume Exhauster
- And Many Others |
|
Manufacturer of centrifugal fans & Blowers
These are curved forward bladed centrifugal professional fans, available in single or three phase, DC or 400Hz, and ATEX versions. Additionally speed controllers can be fitted and heat spinners can be supplied to withstand temperatures of up-to 150 ºc.
Our centrifugal blowers have forward and backward curved blades, single and double inlet, with or without housing, ideal for general extraction and professional cabinet cooling applications.
- Flow rates up to 4000M³/Hr (2350CFM)
- Pressures up to 15 mBAR (6 In.SWG)
- Available in single or three phase, DC or 400Hz, and ATEX versions
- A comprehensive range of accessories is available, for example, speed controllers can be fitted and heat spinners can be supplied to withstand temperatures of up-to 150 ºc.
- Volume or specialised bespoke available
- Full design and testing facilities, including airflow and noise testing
|
|
CS series, MS series, and FMS series
Futural: ventilation, cooling and drying application for professional oven, plastic, printing and other industries.
Selling individually is available for all professional fan parts.
SSD series
Futural: for indoor and kitchen ventilation, cooling, and drying |
|
The Cobra® manufacturers of centrifugal fans are specially designed to solve the majority of ventilation problems i.e., pits, tanks, vessels and confined
spaces...
Easy maintenance:
Its compact design makes it adaptable to the most diverse operations of, service, fresh air input and elimination of contaminated air.
Adaptability:
Numerous accessories are available, allowing the Cobra® to ventilate anything anywhere.
Security:
The Cobra® also exists in a compressed air version. In order to avoid the risks of an explosion in certain hazardous atmospheres.
Professional fan available in ATEX version (type examination certificate INERIS 04 ATEX
3002X) II2 G or D or GD, II3 or D or GD. |
|
BD MANN
BD-19/19 - BD-33/33
DESCRIPTION:
Centrifugal low pressure professional fans
Airflow: 1.000 - 7.500 m3/h
APPLICATIONS:
- Professional cabinet fans.
- Centrifugal heaters.
- Smoke and stream extraction. |
|
Impeller diameter for AC-input: 50mm - 160mm
Impeller diameter for DC-input: 80mm - 120mm
Air capicity 0.21m³/min - 9m³/min
Static pressure 37Pa - 686Pa
AC-input: 200/220/230V AC or 100/110/115V AC
DC-input: 24V DC
Marking: CE, UL and cUL
|
|
- High-efficiency professional fans in all power ratings
- RBTP: Standard pulley/belt, transmission from 10 to 150 hp
- RB: Standard, transmission directly from end of motor shaft, 2 to 25 hp |
|
|
|
Fans
