|
|
Up to 350 bar
Expert advice on everything you need
We believe that providing our clients with complete, competent support services is all part of the product. We can provide the technical design, professional installation and servicing and maintenance if so required.
We always find out what our clients really need first, analysing their requirements to ensure we offer the correct, complete solution. |
|
Up to 420 bar
With the WP 4325 and WP 3215 compressor types, the existing Sauer line of air-cooled high-pressure supplier of compressors has been enlarged.
The Tornado series consists of the three-stage WP3215 and the four-stage WP 4325. Each of these is available in the "Basic-Version" - a compressor with motor and an optional separate control unit - and in the "Comsilent-Version" - a complete, ready-to-operate system with soundproof canopy. |
|
Sauer Industrial compressors UK offers 2-stage, 3-stage and 4-stage air cooled compressors covers from 40 bar up to 420 bar.
With the WP 4325 and WP 3215 compressor types, the existing Sauer line of air-cooled high-pressure compressors has been enlarged.
The Tornado series consists of the three-stage WP3215 and the four-stage WP 4325. Each of these is available in the "Basic-Version" - a compressor with motor and an optional separate control unit - and in the "Comsilent-Version" - a complete, ready-to-operate system with soundproof canopy.
The "Comsilent-Version" of a modern compressor center. Fully automatic electronic control, noise insulation down to 72dB (A) at a distance of has everything presently required 1m, integrated professional filter, demistor and condensate collector professional tank. The width of less than 800mm width allows it to be conveniently brought through any professional door, the maintenance points are easily accessible through a side maintenance hatch or a front side designed as a door.
Compressors of the Tornado series can naturally also be supplied fitted out for special applications, for example as a gas-tight version for compressing industrial helium, or for use in explosion-protected zones in compliance with ATEX regulations.
|
|
Mini compressor supplier high pressure tri-staged cooled by air, for Oxygen, Helium, Nitrogenizes and other dry gases.
- Pressure of aspiration: 0 to 1,7 bar,
- Max. Pressure repression: 150 bar,
- Flow: 1,74 to 7,5 l/min.
|
|
Sauer Compressors supplier UK offers 2-stage, 3-stage and 4-stage air cooled compressors covers from 40 bar up to 420 bar.
With the WP 4325 and WP 3215 compressor types, the existing Sauer line of air-cooled high-pressure compressors has been enlarged.
The Tornado series consists of the three-stage WP3215 and the four-stage WP 4325. Each of these is available in the "Basic-Version" - a compressor with motor and an optional separate control unit - and in the "Comsilent-Version" - a complete, ready-to-operate system with soundproof canopy.
The "Comsilent-Version" of a modern compressor station. Fully automatic electronic control, noise insulation down to 72dB (A) at a distance of has everything presently required 1m, integrated professional filter, demistor and condensate collector professional tank. The width of less than 800mm width allows it to be conveniently brought through any professional door, the maintenance points are easily accessible through a side maintenance hatch or a front side designed as a door.
Compressors of the Tornado series can naturally also be supplied fitted out for special applications, for example as a gas-tight version for compressing helium, or for use in explosion-protected zones in compliance with ATEX regulations.
|
|
Sauer Compressors manufacturers UK offers 2-stage, 3-stage and 4-stage air cooled compressors covers from 40 bar up to 420 bar.
With the WP 4325 and WP 3215 compressor types, the existing Sauer line of air-cooled high-pressure compressors has been enlarged.
The Tornado series consists of the three-stage WP3215 and the four-stage WP 4325. Each of these is available in the "Basic-Version" - a compressor with motor and an optional separate control unit - and in the "Comsilent-Version" - a complete, ready-to-operate system with soundproof canopy.
The "Comsilent-Version" of a modern compressor center. Fully automatic electronic control, noise insulation down to 72dB (A) at a distance of has everything presently required 1m, integrated professional filter, demistor and condensate collector professional tank. The width of less than 800mm width allows it to be conveniently brought through any professional door, the maintenance points are easily accessible through a side maintenance hatch or a front side designed as a door.
Compressors of the Tornado series can naturally also be supplied fitted out for special applications, for example as a gas-tight version for compressing industrial helium, or for use in explosion-protected zones in compliance with ATEX regulations.
|
|
Up to 70 bar
Customer-led and service-driven: a special blend of support and performance
The performance of our machines3-stage air-cooled compressors suppliers is matched only by our customer support: outstanding service you can rely upon at any time. Our business traditions are based on straight dealing, where honesty is always welcome and a handshake still counts.
Our full range stocks mean we can deliver spare parts required immediately - even for earliest generation compressor parts. |
|
To be able to meet customer's demands for particularly low-maintenance compressors manufacturers, Sauer, in conjunction with well-known partners successfully developed a series of 3-stage air-cooled compressors at the beginning of the 1970s.
Through the division of compression into three stages, these designs demonstrate exceptional endurance even under very difficult operating conditions. We have delivered over 4,000 of these compressors to our customers all over the world for a wide range of applications - you too can benefit from our experience.
The performance of our machines 3-stage air-cooled compressors is matched only by our customer support: outstanding service you can rely upon at any time. Our business traditions are based on straight dealing, where honesty is always welcome and a handshake still counts.
Our full range stocks mean we can deliver spare parts required immediately - even for earliest generation compressor parts. |
|
To be able to meet customers demands for particularly low-maintenance compressors manufacturer, Sauer, in conjunction with well-known partners successfully developed a series of 3-stage air-cooled compressors at the beginning of the 1970s.
Through the division of compression into three stages, these designs demonstrate exceptional endurance even under very difficult operating conditions. We have delivered over 4,000 of these compressors to our customers all over the world for a wide range of applications - you too can benefit from our experience.
The performance of our machines3-stage air-cooled compressors is matched only by our customer support: outstanding service you can rely upon at any time. Our business traditions are based on straight dealing, where honesty is always welcome and a handshake still counts.
Our full range stocks mean we can deliver spare parts required immediately even for earliest generation compressor parts. |
|
To be able to meet customers demands for particularly low-maintenance compressors, Sauer, in conjunction with well-known partners successfully developed a series of 3-stage air-cooled compressors at the beginning of the 1970s.
Through the division of compression into three stages, these designs demonstrate exceptional endurance even under very difficult operating conditions. We have delivered over 4,000 of these compressors to our customers all over the world for a wide range of applications - you too can benefit from our experience.
The performance of our machines3-stage air-cooled compressors is matched only by our customer support: outstanding service you can rely upon at any time. Our business traditions are based on straight dealing, where honesty is always welcome and a handshake still counts.
Our full range stocks mean we can deliver spare parts required immediately even for earliest generation compressor parts. |
|
The compact, quiet 12 and 24V DC compression trains are suitable for various applications, including advanced control equipment, military vehicles, trams, trains, emergency vehicles, and remote medical equipment.
|
|
The Hyper compressor is a high-pressure reciprocating compressor for low density polyethylene plants, with discharge pressure up to 3500 bar (50,000 psi). Burckhardt Compression has an outstanding experience of over 55 years in manufacturing Hyper compression trains. It excels with long lifetime and high safety requirements thanks to its unique design features and Burckhardt Compression's worldwide one-stop service.
The world's most powerful compressor, driven by a 27'500 kW (36,900 HP) electronic motor and compressing 160 tons of ethylene per hour to a discharge pressure up to 3100 bar (45,000 psi), was built by Burckhardt Compression in 2007.
|
|
When a reliable supply of quiet pneumatics is required, JUN-AIR's oil-lubricated range of suppliers of compressors is the perfect choice. The noise level is as low as 35 dB(A) - far below the level of normal conversation.
The quiet, vibration-free and reliable compressors have a compact design and are easily mounted at the place of use.
|
|
ROLLAIR 80 - 100 - 125 - 150EA suppliers of compressor developed in line with a longstanding tradition : quality, reliability, reduced maintenance costs, optimum energy efficiency.
Power: 75 up to 150 ch
Pressure: 7.5 up to 13 bar
FAD: 429 1175 m/h
Noise level: 64 up to 73 dB(A)
Cooling: AIR or WATER |
|
The NOVAIR medical air stations are designed and manufactured according to and in compliance with the European standards. All of our medical air stations are marked as CE medical devices (93/42/CEE European Directive).
Medical air stations are available in a wide range of EN 737-3 compliant configurations:
- reciprocating and screw type manufacturer of compressors configurations
- single, duplex, triplex and multiplex sources
- horizontal, vertical, modular and shelterized configurations
- electromechanical and/or electronic control features
- output flow: from 4 to 600 m3/h
A complete range of medical air piping accessories is also available. |
|
Beverages :
Compressed air to drive beer pumps
When Dispensing Beer do you have any of these problems?
- Over Carbonated Beer in Glass?
- Slow Dispense Beer Wastage?
- Over Carbonated Beer in Kegs?
To Dispense the Perfect Pint Contact us we have the Solutions
Soft Drink Dispense
Small compact compressor stations available to drive syrup pumps.
|
|
oil-free
up to 150 bar
absolutely gas-tight
compressed air and gas
ATEX-conformity
air- or water-cooled |
|
HAUG PISTON COMPRESSORS FOR OIL-FREE PNEUMATICS
HAUG guarantees technically and economically optimal solutions for compressed air supply, with the security of a constant oil-free quality of the compressed air.
Universal ways of operation
Due to the dry-running technology the HAUG piston compressors can be out of operation, without causing any problem compared to lubricated-compressors and screw compressors manufacturers. Operation in idle run mode is not required.
Universal application for:
Continuous operation
Intermittent operation
Emergency or reserve operation
|
|
OK series are designed to provide an oil-free compressed air solution for the smaller compressed air user in sensitive industry sectors such as; the healthcare sector, pharmaceutical and medical sectors and the food industry, where absolutely oil-free compressed air is paramount.
The innovative design principle behind the OK series eliminates the risk of oil contamination providing the user with oil-free air up to 768 l/min.
Moreover, whether there is a constant or intermittent demand pattern the OK series always provides the cleanest solution for oil-free air!
All components have been specifically selected with environmentally sensitive considerations in mind in order to ensure oil-less air generation.
The compact and space saving vertical construction of the OK series further provides for a small footprint ideal where space is at a premium. |
|
Compressor ranges
For the dimensioning of your compressed-air supply we offer a variety of variable oilfree compressors manufacturers - starting from the compressor range KK8, the smallest compressor type A-025 (25l/min) up to the biggest oilfree compressor type B-304 of the Marathon range.
Select the optimum compressor by means of the characteristic curves.
|
|
Sophisticated use of clean and dry pneumatics in laboratories, within the dental and medical industry results in an increasing demand for higher quality oil-less suppliers of air compressors.
The JUN-AIR models 1000 and 2000 are traditional piston compressors manufacturer, providing reliable operation and long lifetime.
Additionally JUN-AIR has introduced the compact and robust OF300 series based on the latest technology in material and an innovative principle of compression with few moving parts.
|
|
Industrial lubricated piston compressor suppliers designed for an intensive use 24 hours a day corresponding to the most demanding customer's needs.
Power : 2 to 15 hp
Pressure : 10 to 15 bar (145 to 218 PSI)
Air professional receivers : 120 to 500 litres
Exists on frame or air-receiver mounted
|
|
ENVIRONMENTALLY FRIENDLY COMPRESSION OF GASES A HAUG SPECIALITY
HAUG gas compressors run absolutely oil-less with dry lubrication. The oil-less compression avoids any contamination of the process gas and the process machinery.
To obtain an absolutely hermetically gas-tight unit, HAUG gas compressors supplier are equipped with a magnetic coupler. For this construction the permanent total gas leakage is less than 0.001 mbar l/s during operation as well as at standstill. In the case of helium at 3 bar pressure the gas loss is merely 5 grams per year! Contamination of the ambient environment through gas leakage with these compressors is practically impossible.
|
|
Piston
Our piston air compressors manufacturer and vacuum pumps supplier are built to withstand the most rugged operating conditions, with corrosion-resistant materials used for critical internal parts. These air manufacturers of compressors and vacuum pumps are available in motor mounted and separate drive versions.
Oilless design delivers uncontaminated air; pumps stay professional cleaner and require less servicing
Exclusive lap joint ring design and stainless steel industrial seal provide optimum efficiency throughout the service life of the pump
Aluminum pistons, professional cylinder and cylinder heads ensure excellent corrosion resistance
Stainless steel taps help maintain maximum pump efficiency by resisting moisture and preventing foreign particles from lodging on cock seats
|
|
MEDO Air Blowers
applications:
- aeration of sewage treatment plants
- biogas plants
- aquatic
- medical
& more |
|
Direct driven professional piston manufacturers of compressors
This series of direct driven piston compressors is very compact in construction. These Creemers products are, of course, eminently suited for professional use.
The compressors are available in 1-, 2 and 3 professional cylinder versions from 0.5 to 1.5 kW, on the basis of 230 V, 50 Hz, single phase. We also have a 12 and 24 Volt compressor in our range, Portair 12V and 24V, which are ideal for carbattery operation. All of these products come, of course, with a complete Creemers guarantee.
|
|
This series of direct driven professional piston suppliers of compressors is very compact in construction. These Creemers products are, of course, eminently suited for professional use.
The compressors are available in 1-, 2 and 3 professional cylinder versions from 0.5 to 1.5 kW, on the basis of 230 V, 50 Hz, single phase. We also have a 12 and 24 Volt compressor in our range, Portair 12V and 24V, which are ideal for carbattery operation. All of these products come, of course, with a complete Creemers guarantee. |
|
|
|
Reciprocating compressors
