|
|
A smooth production process, a quality end product, the lowest operating and maintenance costs and ensuring a healthy environment . These are the inherent qualities of oil-free air compression. Evaluate the products and make the right selection: the ZR/ZT range.
|
|
|
Atlas Copco is the leading manufacturer of portable compressed air machines in the world. Used in a wide variety of industries, Atlas Copco has developed a set of machines that successfully walk the line between size, output and capacity.Drilling is a high intensity business where every second counts, and there is no room for error or failure. The 25 Bar (365 psi) machines from Atlas Copco are the most durable and robust machines in their class, and as such they lead the industry. These machines are flexible and multi-purpose: from demanding large rotary blast holes, deep-hole drilling to large diameter pipeline cleaning. Adapted to working in difficult conditions and extreme temperatures, they are the natural choice for deep-hole drillers and the Oil & Gas industry.
|
|
|
|
|
|
TRAILER type/PDS series
Compressor supplying air energy at construction site
▪ Available in a wide range of models to meet your need.
▪ Featuring sound-proof structure and low noise, easy operation, and completely monitoring system.
▪ High-performance compressor with proven reliability and high efficiency.
HIGH PRESSURE type/PDSE,F,G,H,J,K series
Compressor supplying high pressure air
▪ AIRMAN original screw design enable to supply high pressure air.
▪ Suitable for foundation job such as jacking method, down the hole method, and large boring construction.
BOX type/PDS series
Compressor supplying air energy at construction site
▪ Available in a wide range of models to meet your need.
▪ Featuring sound-proof structure and low noise, easy operation, and completely monitoring system.
▪ High-performance compressor with proven reliability and high efficiency.
AFTER-COOLER type/PDS-C series
Compressor supplying air energy without water vapor
▪ After-cooler to eliminate water moisture from the compressed air.
▪ Suitable for sand-blasting and chipping.
▪ Pillarless design is adopted for easy accessibility to interior inspection and maintenance.
DRY AIR type/PDS-D series
Compressor supplying dry air
▪ Compact body with a built-in After-cooler, Auto-drain, After-Warmer, etc.
▪ Supply dry air in even rainy or high fumidity condition.
▪ Suitable for pipe cleaning, painting, and sand-blasting.
|
|
|
Range supplements from 2 to 45 m3/min; version shock-proof cap steel or body (on the compressors with 1 axle); pressures from 7 to 30 bars, the compressors with diesel engine of Copco Atlas can integrate final cooling agent, heater, filters, roller of flexible device....
|
|
A Wide variety of users rely on CompAir C Series compressors when there is a demand for portable compressed air. Pressures range, depending on the model, from 7 to 14 Bar (101 to 204 psi). CompAir's experience in the design and manufacture of high quality and efficient portable compressors spans 200 years.(Holman was founded in 1801).
The whole range consists of over 30 models, there is a model to suit any application, from the smallest single axle model, powering a single pneumatic tool, through to the innovative Turboscrew range of machines. All models have easy access for operation and routine maintenance as standard across the range with well located control panels and simple lift off canopies or large access doors.
|
|
|
|
|
|
A wide range of %u201Csingle tool%u201D compressors to match exactly your air requirements.
The smallest is the C14, a compact manually transportable Honda petrol engined screw compressor to load into a van. This provides 1.4 m3/min. of air at a rated pressure of 7 bar g. Next is the C20 portable, powered by a Kubota D1105 water cooled diesel, and providing 2m3/min. of air at 7 bar g.
If more air is required for extra hand tools or to power a pneumatic pump to drain a trench, chose the C25 powered by the Kubota D1105 and offering 2.5 m3/min. at 7 bar g. Versatility of the single tooler range is increased by provision of generator models for site lighting, electrical tools or fusion welding of polyethylene service pipe.
The C20GS - includes an electrical generator which can be run at the same time as the compressor providing air at 2.0 m3/min, the C30 is powered by the same Kubota V 1505 engine as the C20GS and provides air at 3.0 m3/min
Click here to see this range
Whatever your choice, your energy efficient, reliable CompAir compressor will be supplied as a user friendly, site durable package designed as a result of many years of close attention to the needs of construction contractors, public utility companies and the hire companies supplying them.
|
|
With a strong undercarriage and heavy gauge body, the XAS 185 JD7 Steel provides an especially robust and durable portable compressor. Just pull it to the worksite and start working.
Powered by a 4-cylinder John Deere engine, the Series 7 compressor will provide a reliable source of compressed air to drive various pneumatic tools, including chipping and jackhammers, nut runners, grinders and hammers.
|
|
QAX generators have been designed to meet the demands of rental fleets, construction applications and public utility companies and compliment our proven QAS generator range.
All machines are built to ISO 9001 quality assurance standards and meet current and pending legal safety and environmental requirements for the working environment. All Atlas Copco generators are tested to perform under the most demanding conditions.
|
|
|
|
|
|
-The XA(T,H)S 37-97 range of portable air compressors from Atlas Copco is an innovative range of single axle, oil-injected rotary screw compressors.
Powered by a 3-cylinder KUBOTA engine or a 2 or 3-cylinder DEUTZ engine, the Series 7 compressor will provide a reliable source of compressed air to drive various pneumatic tools, including chipping and jackhammers, nut runners, grinders and hammers.
- The XA(H,V,T)S 106-186 range of portable air compressors from Atlas Copco is an innovative, state-of-the-art series of oil-injected rotary screw compressors, powered by reliable Deutz diesel engines. The modular design of these single axle units allows you to add many options to suit your needs and applications.
- The XAS 356, XAHS 236 and XAMS 286 top the successful Atlas Copco range of 32 to 185 l/s (67 to 392 cfm) compressors. All models are single stage, oil-injected screw compressors with a free air delivery of 239, over 288 up to 345 l/s (507, 610 and 731 cfm) at 7, 8.6 and 12 bar(e) (102, 125 and 175 psig) respectively. They offer the highest capacity of any single axle trailed Atlas Copco compressor.
-XAS 746 / XAS 1600 CD6 is an oil-injected rotary screw compressor that delivers from 753 l/s (1600 cfm) at 7 bar (100 psig) to 645 l/s (1370 cfm) at 10.3 bar (150 psig). The machine is powered by a Caterpillar C13 diesel engine which fully complies with Tier-III/Stage-III exhaust emission standards
-OEM compressed air modules
Oil-injected rotary screw compressors
Capacity:
150 l/s - 590 l/s
9 m3/min - 35.4 m3/min
318 cfm - 1250 cfm
12 -30 bar(e)
175-435 psig
|
|
XA(T,H)S 37-97 HardHat
Oil-injected rotary screw compressors
Around the world, construction and demolition site personnel wear a hard hat for protection. Now another important member of the team comes with its own safety kit, the latest HardHatTM compressor range from Atlas Copco.
Protected by an impact resistant canopy, the nine single-axle HardHatTM models combine great looks and class leading performance with the best damage and corrosion resistance in the business.
It is not just protection that is on offer. The one-piece HardHatTM canopy lifts to provide unrivalled service access, a key to reducing costs and minimizing downtime. Maximum protection, great looks and easy service access. Typical forward thinking from Atlas Copco.
|
|
HPC KAESER Mobilair portable screw compressors are powerful, mobile machines for providing compressed air on the construction site or industry for applications such as road breakers, power moles and sand blasters. The wide range of Mobilair models and options covers every demand of the construction industry from power tools to auxiliary electrical supplies for lighting and welding.
The HPC Kaeser partnership brings a wealth of experience and expertise to the market with a range of portable compressors and accessories providing ideal solutions to the varied needs and demands of the U.K. portable compressor market. From the compact M12 with a capacity of 1.2m3/min (42cfm), that can be transported in the back of a small vehicle, to the high-performance M260 delivering 26m3/min (918cfm) at 7bar.
|
|
Process-Gas Screw Compressor
Process-Gas Screw Compressors are used in all applications where heavily contaminated components in gases and gas mixtures would curtail the life of other types of compressors. Their low speed of rotation permits direct injection of large quantities of liquid.
These oil-free compressors attain volume flows of up to 100,000 m³/h and an outlet pressure of 50 bar.
They are used in innumerable applications:
* Refineries
* Petrochemical plants
* Chemical production plants
* Oil and gas production
* Plants for iron and steel production
* Mining.
|
|
GEAR series
The new power packs for extensive compressed air requirementsPower class: 30 – 500 kW The gear-driven plants of the GEAR series enable ALMIG to offer a new generation of screw compressors for extensive air requirements. Delivery quantities of between 3.58 and 71.15 m³/min at max. operating pressures of 8, 10 and 13 bars.
With drive outputs of 30-500 kW the plants are available in an air-cooled (30-250 kW) and a water-cooled version (30-500 kW).
The easy-to-maintain and service drive concept with a robust drive motor with generous power reserves, easy-to-maintain and service gear and novel flexible gear drives with replaceable working elements protect the drive, work with minimum slip but with high operational reliabilityand virtually without loss (efficiency >98%). Highly efficient separation of the cooling agent facilitates a residual oil content of only 2–3 mg/m3.
|
|
The construction of the double-stage VMT-compressors is based on our proven, single-stage compressor series VM.37.
The VMT-series is designed for oil-free conveyance of air and neutral gases and has already been used since 1970 for the industrial generation of compressed air.
For the diverse industrial ranges of compressed air technology the double-stage units were steadily adapted to the changing operation requirements and modified. Experience of more than 200 supplies has developed a compressor unit, which can convert nearly all special applications of compressed-air technology according to the customers' individual requirements. The VMT-compressors cover motor ratings from 90 to 1020 kW and differential pressures up to 10 bar. This series is available in water-cooled as well as air-cooled design.
|
|
|
|
|
|
PURGE type/SAS-S series
S series with great cost performance
▪ "Purge unloader + Auto-start/stop device" are equipped for saving energy.
▪ Applicable to some function such as alternate operation and remote control.
▪ Extended maintenance cycle to reduce operating expense.
E·CON type/SAS-U series
AIRMAN ORIGINAL ENERGY SAVING SYSTEM
Perform efficiently more than inverter
▪ Airman unloader system reduces on power consumed at unload operation to about 20%.
▪ ACCS (Airman Computer Control System) is to reduce full load power by about 5%.
▪ Applicable to some function such as alternate operation and remote control.
INVERTER CONTROL type/SAS-V series
Original inverter control to save energy efficiently
▪ Maximized use of motor output, service air volume is increased by using pressure.
▪ Corresponding with change of air volume used without loss to save energy.
▪ Constant control of pressure enables to operate at the lowest required pressure and not to waste it.
OIL FREE type/SAD·SWDseries
Compressor supplying clean air excluding oil.
▪ Using special surface treated/ coated twin screw rotor.
▪ By adopting balance piston, exchange cycle of bearing is extended.
▪ Applicable in many fields such as food, medical, precise industry.
|
|
SCREW COMPRESSOR APS 3 Basic Combi Dry (with dryer)
Recommended:
- Pre/Micronfilter
- Condensate cleaner ACR 1
Specs Screw block type Airpress csm
Intake capacity (l/min) 310
Receiver (l) 200
Switch Direct
Working pressure (bar) 8
Pressure (max., bar) 10
Sound level (dB(A)) 61
Dew point (ºC) +3
Coolant R 134a
Dimensions (l x w x h, cm) 142 x 57.5 x 125.5
Weight (kg) 187
Electric tension (Volt/Hz/Ph) 230/50/1
Fuse (A, slow) 20
Dryer (Volt/Hz/Ph) 230/50/1
|
|
|
The Rotary Compressor Division is involved with the design, development and manufacture of electric and diesel powered screw air compressors.
|
|
Features:
Controls
*Uses only reputed and reliable control
*Simple system with minimum number of spare parts
Mimic Panel
*User friendly, compact, annunciation panel with display
*Constantly monitors status of compressor operation
Electronic Control Panel
*In-built safety trips as standard feature
*Isolated panel with swing out door for easy servicing
Aftercooler
*Comes as an integral part to ensure quality air
*Tropicalised design to withstand extreme temperatures.
Oil Seperation
*Highly efficient two-stage oil separation
*Spin-on element ensures less downtime to replace.
|
|
|
|
|
|
Rotary lubricated screw compressor, direct drive
Models available: 30kW to 45kW
Capacity range: 282m3/h to 462m3/h
Pressures available: 7, 8, 10 and 12 bar
Standard Equipment: 400 Volts three-phase, IP55 motors and wye-delta starting
Electronic controller. Air-cooled, Carrier fan. Sullube long-life and anti-glazing lubrication. Modular panels. CE certified.
Control / Regulation:
Microvisor 1.500 controller as standard and Microvisor 2.000 as option.
Inlet modulation as standard on fixed-speed models.
Variable speed drive range from 30 to 45kW.
Integral inter-machine communication and sequencing via RS485.
Easy integration into a sequencing network.
Applications: Suitable for all users who search both performances and value for money. Reliability, performance and manufacturer warranties make it the ideal product for installations where compressed air is strategic. Its small footprint, its low noise level et its ability to operate up to 50°C ambient, allow an easy integration in any environment.
Warranties :
5-year* warranty on the other major components
*special contractual warranty, available from Sullair distributors participating in the program.
|
|
Technology:
Rotary lubricated screw compressors, belt drive.
Models available: 2.2kW to 75kW
Capacity range: 17m3/h to 780m3/h
Pressures available: 7, 8, 10 and 12 bar
Standard equipment: 400 Volts three-phase, IP55 motors and wye-delta starting from 7.5 kW. 2.2, 4 and 5.5 kW models fitted on 270-litre tank. Sullube long life and anti-glazing lubricant. Removable panels. EC certified. Single belt drive.
Key points:
Sturdy chassis and design providing the means for operation in any sort of environment, even the most difficult ones. Fast, easy maintenance at low cost.
Very low oil content in the air supplied. Immediate use and flexibility of use. Small footprint on the floor.
Control / Regulation:
Microvisor 2 and Microvisor 2V electronic controller.
Load/unload operation with no-load and min. pressure valve.
Optional inlet modulation of the flow rate on aspiration. TREK-V variable-speed range, including On/Off control of 2 compressors.
Easy integration into a sequencing network.
|
|
|
|
|
|
Technology: Rotary lubricated screw compressor, direct drive.
Models: 55kW to 160kW
Capacity range: 444m3/h to 1,620m3/h
Pressures available: 7, 8, 10 and 12 bar
Standard equipment: 400 Volts three-phase, IP55 motors and wye-delta starting.
EFF1 90 to 160 kW motors. Flying Bird 4 fans for power and noise reduction.
Sullube long-life and anti-glazing lubrication. Modular panels. EC certified.
Key points: Ecological as designed to reduce the impact on the planet. Ergonomic for fast, easy maintenance at low cost.
Economic operating cost. Renowned, powerful and reliable air end.
Oil content in the air supplied the lowest on the market.
Flexibility of use. Sullair Variable Capacity System.
Control / Regulation:
Microvisor 3 and Microvisor 3V electronic controller.
Inlet modulation as standard on the whole range.
Sullair Variable Capacity System as standard on 132 and 160 kW, optional on 90 and 110 kW. AIR ONE-V variable-speed range, from 55 to 110 kW.
Integral inter-machine communication and sequencing via RS485.
Easy integration into a sequencing network.
Applications:
Suitable for all users who want to obtain a return on investment. Reliability, performance and manufacturer warranties make it the ideal product for installations where compressed air is strategic.Suitable for all spheres of operations, in particular thanks to the complete offer of control systems it provides, unique on the market.
Warrantees:
10-year** warranty on the Air end!
5-year* warranty on the other major components.
* special contractual warranty, available from Sullair distributors participating in the programme.
** on fixed-speed models only.
|
|
|
|
|
|
S compact range
Clear layout in three sections: easy access to all components
Acoustic atenuator in the air inlet fitted as standard: very pleasant sound pressure level as standard with simple upgrade options to ultra silenced or cooling air exhaust ducting
Nylon laminated, sound insulated fibre mat lining: reduces sound pressure values. Dirt repellent and washable
Modular design using the standard component assembly system
Switch cabinet to DIN and VDE; IP 55 enclosure protection: clearly laid out and protected against dirt
State-of-the-art screw profile: small specific power requirement, excellent economy
High efficiency, class F,
IP 55 motor with PTC-resistor protection: long reliable service life enhanced by design location in cool area of package
ARS control and monitoring system: customised, convenient, economical, reliable
Patented GM belt drive system with constant belt tension: virtually maintenance free belt drive system
Horizontal oil reservoir and pre-separation vessel, removes more than 99% of oil, minimizes oil foam effect with zero pressure drop: ensures consistent residual oilcontent of only 1-3 mg/m³ in every operating phase
Valveless oil circulation system with no oil stop valve or check valve: high operational reliability
Vibration damping between compressor and base frame: no transmission of structure borne sound
Torsionally rigid, base frame for problem free transport fork-lift truck or pallet truck: easy positioning
|
|
We are manufacturers of screw compressors from 3 to 90 kW. Output 14,5 m3/min
(512 cfm) and pressures up to 15 bar (215 psig).
Our compressors are robust with simple and low-cost maintenance features.
With their energy saving asymmetric profile they are designed and proved for rigorous industrial use.
|
|
With ES 3000 energy safer.
This control system performs all operations related to
use of the compressor:
* It performs function checks.
* It provides information about any defects and
irregularities.
* It stops the machine in emergencies.
* It provides the most effective tuning to adjust the
clearance time as efficiently as possible.
Also equipped with:
MultiControl: This system has 3 switch settings:
* On/Off intelligence. Switches when there is little air use
* Modulating. Provides constant pressure with a constant air
use.
* Automatic. This setting combines bothe above settigs.Screw block type Airpress FS 1.5
Motor capacity (HP/kW) 75.0/55.0
Sound level (dB(A)) 71
Dimensions (l x w x h, cm) 110 x 164 x 180.5
Weight (kg) 810
Air connection ('') 1 1/2
Electric tension (Volt/Hz/Ph) 400/50/3
Fuse (A, slow) 125
Intake capacity (l/min) 8630/7800/6420
Ordernr: Code
36475 APS 75 B
|
|
|
The compressors screw GA Premium provide up to 1822 m3/h for pressures from 3.5 to 14 bars for a record energy efficiency. The element of compression to lubricated screws is thought for the conditions more testing and the room temperatures until 55°C. Centered on the effectiveness of operation, the design has a length in advance on all the strategic points: cooling, separation air/oil, drive at variable speed, recovery of the calories, sound-proofing.
|
|
Champion_Logo_Always_webChampion RotorChamp
40, 50 hp
Product Styles- RCS40, RCS50
Premium Efficiencyefd-rotochamp.jpg
Precise rotor profile offers less slippage than competitor offerings to offer a wider band of operating efficiency relative to rotor speed.
Small Footprint
Offers the smallest footprint for its HP range in the industry to maximize your available floor space.
Easy Serviceability
25% fewer parts and superb engineering contribute to one of the most service friendly units available.
|
|
|
Recommended for industry and larger factories that need a constant supply of compressed air up to 24 hours for day. The ABAC screw compressor range has been designed according to the main European Directives to satisfy the needs of the most demanding customers for efficiency, reliability, cost low noise-level, long life , low maintenance and running costs and environmental issues. With their many distributors and after sales support centres throughout the world, ABAC are able to supply a very fast and complete world-wide service to end users.
|
|
|
Versatile transpostables compressors for a great variety of applications: 2 to 25 45 Pressure and m3/min volumes from 7 to bar
|
|
ROTORCOMP develops, designs and builds air ends, encapsulated air ends, custom-build compressor modules and components. Yet, we do not build packaged units, but sell exclusively through our professional partners.
ISO 9001 quality norms and our innovative product range warrant for trouble-free and technically sound compressor solutions.
|
|
|
|
|
|
Within the compressor body there are two screws with matting profile: a female and a male screw, female having concave inlets and the male with convex helical inlets. The screws rotate in opposite directions with the female screw receiving the driving power and transmitting this power to the male screw through a set of synchronization gears.
As the screws rotate, the air is drawn into the inlet port and fills up the space between the screws. This phase is the Admission. The key phase is the Compression. It starts when the end of a male thread blocks the end of a female thread. The volume available between the compressor body and these two threads then progressively decreased during rotation. When this volume merges into the delivery outlet of the compressor, the third phase takes place, hence the Exhaust.
Throughout this process, there is no contact between the screws. This means no wear, total reliability, and non-pulsating air delivery. These compressor/blowers can be used in either a Mobil or stationary application and can be driven by a PTO, electric motor, or hydraulic power system. A complete range of dedicated ancillary product is available to support this product line.
|
|
|
|
Screw compressors
