|
|
Characteristics
- Vertical arrangement.
- Sump.
- Single Suction.
- Single Stage.
Operation Limits
- Capacity 3 to 650 m3/h (10 to 2800 U.S. gpm).
- Head 3 to 120 m (10 to 400 ft).
- Max. Pressure 12 kg/cm2 (175 psi).
- Temperature 200°C (400°F).
Applications
- Water.
- Hydrocarbons.
- Process Water.
- River Water.
- Chemical Solutions.
|
|
|
|
|
|
SCHMITT-Centrifugal Pumps
T and TE range: Vertical sump pumps
The impeller in this range of pumps is driven by extended, free-moving shafts. This method of construction eliminates the need for bearing and shaft sealing.
The temperature threshold of the materials used in the pumps´construction are as follows: 95°C max. for PVDF
- 80°C max. for PP
- 150°C max. for stainless steel
These models are available with a choice of electric drive motors: three-phase or single-phase and three-phase explosion protection or flameproof enclosure drives. All drives can be adapted to work off any voltage or frequency. The characteristic curves of these models have been measured using three-phase double pole 50 Hz motors, with water as a test medium, at a temperature of 20 °C.
Advantages:
- No risk of damage from fluid depletion
- The pumps in this range come equipped with a flange that allows them to be easily mounted on tanks, containers etc.
Some uses and applications:
- Exhaust filtering, gas purification in laboratories
- Sump draining
- Galvanic baths
- Large-scale bakeries
|
|
Features
WIDE RANGE OF
APPLICATIONS:
- Chemical Slurries
- Fragile Food Processing Solids
- Paper & Pulpy Solids
- Petroleum
- Oils
- Sewage & Waste treatment
- Textiles
CAPABILITIES:
- Capacities to 1600 GPM
- Heads to 170 Feet TDH
- Temerature to 350 d. F
- Pit Depths to 26 feet
CONSTRUCTION:
- Cast Iron
- 316 Stainless Steel Fitted
- All 316 Stainless Steel
- Alloy 20
- CD4MCu
|
|
|
All Vanton vertical centrifugal sump pumps are specifically designed to handle corrosive, abrasive and hazardous process fluids, wastewater liquids and slurries of various pH values, and for use in those applications where no metallic or other contaminants can be tolerated. The cantilevered large diameter shaft design of SGK pumps eliminates the necessity for any immersed bearings and permits dependable operation under dry running conditions. These pumps are available in lengths to 5 feet but can accommodate deeper sumps through the use of tail pipes. Models are available with standard semi-open or closed impellers, or with recessed impellers that provide unrestricted flow so that fluids with solids or stringy materials can be pumped without impeller clogging.
|
|
Vertical Industrial
Turbine Pump
Flows to 70000 GPM (4760 m3/Hr)
Heads to 3,500 feet (1,060m)
Pressures to 2500 psi (75kg/cm2)
Bowl sizes from (6" to 55")
Temperatures to 500° F (260° C)
Horsepower to 5000 HP (1860 KW)
Design Advantages
Fabricated discharge head and flanged column.
Flanged bowl construction.
416SS shafting.
Alloy construction with external flush of critical wear areas available for corrosive/abrasive services.
Built-in alignment and simple piping for less costly installation and ease of maintenance/ reduced downtime.
Services
Cooling Water
Seawater and River Water Intake
Industrial Process Pumps
Utility Circulating Water
Condenser Circulating Water Pumps
Ash Sluice
|
|
Floway Pumps' Vertical Hydrocarbon Pumps are built around the versatility of the vertical pump design for the API industry. Our extensive line of low NPSHR impellers allows us to meet demanding NPSHA requirements.
Features / Benefits
- Compliant with API 610 current edition
- Multi-staging in the medium specific speed range
- High pressures with premium efficiences and low operating costs
- Low NPSH first stage construction with Nss below 11,000
- Pressure and flow variations are achieved by changing number of stages or impeller type
- Pump bowl assembly is characterized as low energy per stage resulting in a broad flow range with excellenct hydraulic stability
- Thrust balanced impellers are available for pump axial thrust reduction and assist in obtaining the desired thrust bearing rating/life
- Thrust pot assembly is available in applications where non-thrust carrying motors are required
|
|
Features
* High efficiency impellers and bowls
* Vibration-free performance
* Low submergence
* No priming required
* Dry pit/Wet pit arrangement available
* Direct drive/Right angle gear drive
* Impeller pull-out/Non-pull-out
* Bowl pull-out/Non-pull-out
* Gland packed / Mechanical seal
* 50Hz / 60Hz availability
Applications
* Water supply
* Irrigation
* Cooling tower
* Thermal and Nuclear power plants
* Steel, Cement industries
* Refineries
* Sea water on off-shore platforms
* Condensate extraction
* Fire fighting
* Flood control
* Dry Docks
Range
* Delivery size up to 2200 mm
* Capacity up to 40,000 m³ /hr
* Head up to 200 metres
|
|
|
|
|
|
Griswold Vertical Turbine Pumps are available with two types of pump drives . . . vertical hollowshaft electric motor drive or right angle gear drive. Our turbine pumps offer you a choice of two types of lubrication . . . either a water lubricated line shaft or an oil lubricated line shaft construction.
To fit various applications, Griswold discharge heads are available either cast for above ground discharge or fabricated for various discharge configurations. Depending on pumping requirements, our pump bowls are available in 6”, 8”, 10”, 12” and 14” diameter.
Impellers available in the various bowl assemblies are of different designs and sizes. All impellers are precision designed, engineered and finished to give highest efficiency. Our impellers are made of high-strength bronze, machine, hand finished and dynamically balanced for top performance and long life.
We manufacture a large variety of impeller and bowl designs. This makes it possible for us to fit most any job from 60 to 3500 gallons per minute . . . low or high head . . . open or pressure discharge.
|
|
Application
These pumps are used for water supply, irrigation, dewatering. Turbine pumps are particularly suitable for narrow bore holes. Minimum bore hole sizes range from 200mm to 400mm.
|
|
Characteristics
■Multi-stage vertical centrifugal pumps with diffuser type bowl.
■Francis vane enclosed impellers.
■Counter clockwise rotation viewed from coupling end (as an option).
■Basket or Conical strainer according to pump requirements.
Design Features
■Product or Oil lubricated.
■Large bowl shaft sizing provides longer life.
■Enameled bowls 5” thru 15”.
Standard Construction Materials
■Bowls:
•Cast Iron Bowls.
•Bronze Impellers.
•416SST Shafting.
■Column:
•Carbon steel pipes and AISI-1045 carbon steel shaft.
■Discharge Head:
•Cast iron with 125-AISI flat face flanged connections.
•Fabricated steel with 150# and 300# AISI flanges as an option.
Operation Limits
■Capacity to 13,636 m3/hr (60,000 U.S. gpm).
■Head to 762 m (2,500 ft).
■Pressure to 76 kg/cm2 (1,080 psi).
■Temperature 121°C (250°F).
Applications
■Deep Well & Irrigation.
■Sumps, Condensate (Can Pump).
■Fire Service.
■Municipal.
■Industrial.
Ruhrpumpen Nomenclature
■VTP
■HQ
|
|
|
|
|
|
The VI line heavy duty process pumps, are vertical single stage type
with a side discharge column
These pumps are specifically used on sump applications.
Pump components geometry optimised through hydraulic, structural, thermal and dynamic F.E.M. analysis lead to an high product reliability.
Closed type impeller with front and rear wear rings as well as balancing holes, to minimise the axial thrust.
Large eye single suction 1st. stage impeller to meet low NPSH requirements.
Deep stuffing boxes, designed in accordance to API 682 Std., suitable to accept any type of mechanical or packing seal.
Labyrinths and deflectors at either bearing housing to maximise protection against dirt.
A wide range of sizes and material combinations complete the variety of the offered product.
Main design features
Fully designed according to latest edition of API 610 Std.
Pump shaft fully machined to respect the more restrictive run-out API limits.
As a standard, the rotor axial thrust is supported by a duplex oil lubricated ball angular contact type bearings.
Discharge column, line shaft and support column may consist of multiple sections, depending upon the pump setting. Discharge column mounted with a sliding fit through the sole plate to account for thermal expansions.
Renewable intermediate bushings, lubricated by the same pumped fluid or from an external source, are provided in correspondence of all column sections.
|
|
|
|
|
|
SPP's Lowest Life-cycle Cost Series of single and multi-stage Vertical Turbine pumps have been designed for longevity and incorporate many standard features, which facilitate ease of maintenance. A spacer coupling between the thrust bearing assembly and seal chamber allows a cartridge mechanical seal to be removed without dismantling the headpiece and removing the driver. Easily removable keyed muff type couplings connect all shafts, facilitating disassembly of the whole pump unit with minimal risk of damaging expensive component parts.
High-grade standard materials of construction and a rugged stiff shaft mechanical design coupled to state of the art hydraulics, offer unrivalled longevity and the lowest cost of ownership.
TYPICAL APPLICATIONS:
Water Treatment & Supply
River Water Extraction
Borehole Deep Well Extraction
Drainage & Irrigation
Cooling Tower Circulation
Process & Industrial utility duties
Petrochemical utility duties
Condensate Extraction
Sea Water lift
Power Plant utility duties
|
|
|
|
|
|
ALTI-NEXIS V/VE and N-ALTI V/VE
BEACH Of USE:
Flow: 360 m3/h
HMT: 240 mCE
APPLICATIONS:
Clear water overpressure for the following applications:
- Maintenance with constant pressure of the high pressure networks water supply subjected to variation of flow
- Water conveyance and overpressure (drinking water or slightly chlorinated)
- Agriculture, horticulture, aquiculture (Irrigation, washing...)
- Systems of cleaning, washing in industry
- Water supply industrial
ADVANTAGES:
Modular systems compact from 2 to 4 vertical pumps, preset and ready to be installed
Very top-outputs hydraulics and engine (EFF1 out of standard)
Total pressure loss of the booster (valves, valves, collectors...) lower than 2,5mCE
Quiet valve between supports (pressure loss of only 0,7mCE), drainer on pressure gauge
Easy disassembling of the valves (without having to move back piping)
Collectors aspiration and stainless 304 repression (out of request 316 or galvanized)
Adjustable antivibratory studs
Order and protection gathered in the cupboard which ensures the integral automatism of operation: cascade, permutation, lack of water
Choice of the type of cupboard: electronics advanced (CE+), electromechanics managed by programmable automat (CA) or with variable speed transmission (CV)
|
|
Series 750/760 - Consistent Pressure Booster Systems
Features:
- Completely assembled and prewired for easy installaion
- Compact design allows unit to be moved thru standard 30" doorways
- Pressure sensing control panel has been specifically designed by Aurora pump for pressure boosting applications
- Pressure reducing valves automatically reduce higher inlet pressure to a constant downstream pressure regardless of changing flow rate or inlet pressure
- Feature Aurora Pump Model 342A vertical centrifugal end-suction pumps in bronze fitted construction
- Galvanized piping for corrosion resistance.
|
|
| ... products without technical information |
| |
|
|
|
|
Environmental Engineering:
Armstrong Series 4700, designed for temperatures ranging from 5°F to 250°F (-15°C to 120°C), are well suited for boiler feed applications, condensate recovery and air conditioning systems. Easy to incorporate into industrial environmental engineering equipment, our Vertical MultiStage pumps combine the advantages of compact design, quiet operation and ease of maintenance.
Water Distribution:
From basic water supply to the most specific pressure boosting and fire line pressure maintenance applications, Armstrong Series 4700 Vertical MultiStage pumps satisfy all water distribution requirements. The wide pressure range - from 50 psig to 350 psig (5 bar to 25 bar) - makes this product well suited for applications such as pressure washing of aircraft, trains, boats and road vehicles as well as spray washing of industrial parts and electronic components.
Industry:
Water feed to machine tools, grease removal, cooling of lathes and molds ... water has many uses in the industrial market. The stainless steel design and wide temperature parameters of the Series 4700 Vertical MultiStage pump makes it an ideal unit for light industrial applications.
Water Treatment:
Water is becoming a precious commodity. Water transportation, demineralization, filtration, deionization and reverse osmosis all call for high pressure supply and hygienic considerations. The Armstrong Series 4700 Vertical MultiStage pump, made entirely with stainless steel wetted components, is well suited for these applications.
|
|
|
|
Vertical pumps
